Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Screen-printed carbon electrodes doped with TiO2-Au nanocomposites with improved electrocatalytic performance

  • Gusmão, Rui
  • López Puente, Vanesa
  • Yate, Luis
  • Pastoriza Santos, Isabel
  • Pérez Juste, Jorge
  • González Romero, Elisa
Portable screen-printed carbon electrodes (SPCE) were uniformly modified with TiO2 and Au nanoparticles (TiO2-AuNPs-SPCE). Synthetized AuNPs were characterized by TEM, showing an average diameter of 17.9 ± 2.3 nm. The doped electrodes were characterized using scanning electron microscopy, X-ray photoelectron and Raman spectroscopy. Cyclic voltammetry (CV) performed using as model analytes: an inorganic ([Fe(CN)6]3−/4−) and an organic (catechol) redox probe showed a drastic enhanced of the electrodes electrochemical surface activity and suggested a synergistic catalytic effect between Au NPs and TiO2. Additionally, the electrochemical performance was evaluated for other hydroxyphenols such as hydroquinone, pyrogallol and dopamine. In the case of hydroquinone, the electron transfer rate constant for TiO2-AuNPs-SPCE was estimated to be almost three times faster than for bare SPCE. The results for dopamine also demonstrated remarkably enhanced activity (up to 50%) respect to the non-modified SPCE, showing lower oxidation peak potentials and peak-to-peak separations, as well as, sharper peak current intensities at the TiO2-AuNPs modified SPCE., Ministerio de Economía y Competitividad | Ref. MAT2013-45168-R, Ministerio de Economía y Competitividad | Ref. CTQ2014-53334-C2-1-R, Ministerio de Ciencia e Innovación | Ref. PRI-AIBPT-2011-1096, Ministerio de Ciencia e Innovación | Ref. CTQ2011-23167, Ministerio de Ciencia e Innovación | Ref. MAT2010-15374, Xunta de Galicia
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Screen-printed GPH electrode modified with Ru nanoplates and PoPD polymer film for NADH sensing: Design and characterization

  • Baradoke, Ausra
  • Pastoriza Santos, Isabel
  • González Romero, Elisa
In this work, a simple, selective and stable strategy for encapsulation of triangular ruthenium nanoplates (RuNPs) through o-Phenylenediamine (oPD) polymerization on graphene modified screen-printed carbon electrode (SPEGPH) was demonstrated. o-Phenylenediamine polymer (PoPD) film provided a suitable microenvironment for RuNPs immobilization. Synthesis of RuNPs was characterized by transmission electron microscope (TEM) and electrochemical methods including cyclic voltammetry (CV) and linear sweep voltammetry (LSV). Encapsulation or incorporation of RuNPs through PoPD were carried out following three different strategies and the resulting platforms were investigated using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The electrocatalytic performance of RuNPs-PoPD-GPH platform was demonstrated using the NADH oxidation as model electrochemical reaction. The incorporation of 18 ± 3 nm RuNPs onto PoPD decreased the NADH oxidation potential by ca. 350±5mV in comparison to bare SPEGPH as well as a remarkable enhance of sensitivity to NADH detection. Therefore, RuNPs have provided electron transfer with a strong catalytic effect for NADH oxidation representing a promising application in sensors., Xunta de Galicia | Ref. ED431C 2016-048, Ministerio de Ciencia e Innovación | Ref. CTQ2011-23167, Agencia Estatal de Investigación | Ref. MAT2016-77809-R, Ministerio de Ciencia e Innovación | Ref. CTQ2011-28157, Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Ministerio de Ciencia e Innovación | Ref. PRI-AIBPT-2011-1096