Skip to main content

INTERACCION DE (BIO)MOLECULAS Y NANOMATERIALES DE CARBONO: DESARROLLO DE PLATAFORMAS (BIO)SENSORAS.

CTQ2011-28157

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Screen-printed GPH electrode modified with Ru nanoplates and PoPD polymer film for NADH sensing: Design and characterization

  • Baradoke, Ausra
  • Pastoriza Santos, Isabel
  • González Romero, Elisa
In this work, a simple, selective and stable strategy for encapsulation of triangular ruthenium nanoplates (RuNPs) through o-Phenylenediamine (oPD) polymerization on graphene modified screen-printed carbon electrode (SPEGPH) was demonstrated. o-Phenylenediamine polymer (PoPD) film provided a suitable microenvironment for RuNPs immobilization. Synthesis of RuNPs was characterized by transmission electron microscope (TEM) and electrochemical methods including cyclic voltammetry (CV) and linear sweep voltammetry (LSV). Encapsulation or incorporation of RuNPs through PoPD were carried out following three different strategies and the resulting platforms were investigated using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The electrocatalytic performance of RuNPs-PoPD-GPH platform was demonstrated using the NADH oxidation as model electrochemical reaction. The incorporation of 18 ± 3 nm RuNPs onto PoPD decreased the NADH oxidation potential by ca. 350±5mV in comparison to bare SPEGPH as well as a remarkable enhance of sensitivity to NADH detection. Therefore, RuNPs have provided electron transfer with a strong catalytic effect for NADH oxidation representing a promising application in sensors., Xunta de Galicia | Ref. ED431C 2016-048, Ministerio de Ciencia e Innovación | Ref. CTQ2011-23167, Agencia Estatal de Investigación | Ref. MAT2016-77809-R, Ministerio de Ciencia e Innovación | Ref. CTQ2011-28157, Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Ministerio de Ciencia e Innovación | Ref. PRI-AIBPT-2011-1096
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Simple diazonium chemistry to develop specific gene sensing platforms

  • Revenga Parra, Mónica
  • García Mendiola, Tania
  • González Costas, Javier Marcos
  • González Romero, Elisa
  • García Marín, Antonio
  • Pau, José Luis
  • Pariente Alonso, Félix
  • Lorenzo Abad, María Encarnación
A simple strategy for covalent immobilizing DNA sequences, based on the formation of stable diazonized conducting platforms, is described. The electrochemical reduction of 4-nitrobenzenediazonium salt onto screen-printed carbon electrodes (SPCE) in aqueous media gives rise to terminal grafted amino groups. The presence of primary aromatic amines allows the formation of diazonium cations capable to react with the amines present at the DNA capture probe. As a comparison a second strategy based on the binding of aminated DNA capture probes to the developed diazonized conducting platforms through a crosslinking agent was also employed. The resulting DNA sensing platforms were characterized by cyclic voltammetry, electrochemical impedance spectroscopy and spectroscopic ellipsometry. The hybridization event with the complementary sequence was detected using hexaamineruthenium (III) chloride as electrochemical indicator. Finally, they were applied to the analysis of a 145-bp sequence from the human gene MRP3, reaching a detection limit of 210 pg μL−1., Ministerio de Ciencia e Innovación | Ref. CTQ2011-28157, Comunidad Autónoma de Madrid | Ref. S2009/PPQ-1642
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Effective monitoring of the electro-Fenton degradation of phenolic derivatives by differential pulse voltammetry on multi-walled-carbon nanotubes modified screen-printed carbon electrodes

  • Bounab, Loubna
  • Iglesias Castrillejo, Olalla
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
This work illustrates a fast, sensitive and selective electroanalytical methodology for simultaneous determination of phenolic derivatives. Optimization of differential pulse voltammetry (DPV) conditions and electrochemical study by cyclic voltammetry (CV) of phenolics are included. Differential pulse voltammetry at screen-printed carbon electrodes (SPCE) was selected for the sensitive detection of m-Cresol and Tert-butylhydroquinone. The introduction of Multi-walled Carbon-Nanotubes with acid groups, MWCNT-COOH, as modifier on working SPCE enhances the performance of electrode surface with a highly catalytic activity on it, allowing a 5-fold higher sensitive analysis than unmodified SPCE, with a limit of detection as low as about 1 μM. This simple and low-cost methodology has been applied, for first time, to monitoring the electro-Fenton degradation of m-Cresol, giving selective information of the reactant loss and products formation. Aromatic intermediates (monohydroxy, polyhydroxy and quinone phenolic derivatives) have been identified and followed during the electrolysis process. The electro-Fenton with iron on activate carbon is 4-fold faster than with other catalyst. The results are validated by chromatographic (HPLC) technique. The electroanalytical methodology described, in conjunction with the use of small SPCE as sensor transducer, can be implemented for continuous monitoring of end-point of the electro-Fenton reaction at industrial level in wastewater remediation plants, indicating the two main stages of electro-Fenton during the electrolysis., Ministerio de Ciencia e Innovación | Ref. CTQ2011-28157, Xunta de Galicia, Universidade de Vigo, Ministerio de Ciencia e Innovación | Ref. CTM2011-26423
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Capítulo o parte de un libro (BookPart)

Fitorremediación en agua dulce contaminada

  • Gómez Fernández, Siria
  • García Sánchez, Josefa
  • Torres Palenzuela, Jesus Manuel
  • González Romero, Elisa
El control de contaminantes antropogénicos es un reto prioritario en la conservación del medio ambiente, sobre todo si se piensa en salvaguardar el recurso hidrológico para las generaciones venideras. Sin embargo, es un recurso extremadamente mal gestionado por las innumerables fuentes de contaminación, las cuales alteran las propiedades del mismo, afectando a largo plazo los ecosistemas que dependen de él. El objetivo principal de este trabajo es conocer como actúan las microalgas sobre determinados contaminantes presentes en el agua, aplicando procesos de biorremediación con ellas, que intervienen en el proceso como precursoras. Para conocer su actuación, en primer lugar, se hace necesario caracterizar las muestras de agua a través de sus propiedades físico-químicas para que aporten información relativa a la calidad de la misma, investigando, al mismo tiempo, si cada uno de los parámetros indicadores medidos, está dentro de los límites legales establecidos. En segundo lugar, analizar si, dichas muestras, están libres de contaminantes y, en caso de no estarlo, aplicar un proceso de bioremediación para eliminar al contaminante. A modo de ejemplo, se describe la puesta a punto de un método de fitorremediación con microalgas del ion fluoruro., UE | Ref. EnerBioAlgae-SUDOE SOE2//P2/E374, Ministerio de Ciencia e Innovación | Ref. PRI-AIBPT-2011-1096, Ministerio de Ciencia e Innovación | Ref. CTQ2011-28157, Xunta de Galicia | Ref. R2014/030