Skip to main content

HIBRIDACION DE TECNOLOGIAS DE OXIDACION AVANZADA Y ADSORCION SELECTIVA PARA LA RECUPERACION Y/O ELIMINACION DE MICROCONTAMINANTES

CTM2017-87326-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Exploring the use of carbon materials as cathodes in electrochemical advanced oxidation processes for the degradation of antibiotics

  • Poza Nogueiras, Verónica
  • Gomis Berenguer, Alicia
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Ania, Conchi O.
Three carbon materials from a varied origin, composition and porosity have been used as cost-effective cathodes in different electrochemical advanced oxidation processes (i.e. anodic oxidation (AO) and electro-Fenton (EF) in homogeneous and heterogeneous catalysis modalities) for the degradation of an antibiotic (e.g., metronidazole). In general, the efficiency towards the pollutant degradation increased as: AO < homogeneous EF < heterogeneous EF. The heterogeneous EF approach with iron pre-loaded in the carbon cathode outperformed the homogenous EF counterpart, despite a lower amount of iron. Reusability tests showed that iron-containing cathodes prepared from samples CQ (carbon obtained upon steam activation) and CB (carbon prepared by H3PO4 activation of biomass) were stable over at least three consecutive cycles. The best results were attained for cathode prepared with carbon CQ modified with iron, yielding over 97% removal of metronidazole after 150 min in all three reuses. Such better performance is related to the favorable adsorption of the pollutant on carbon CQ, thereby favoring the close contact between the generated oxidant species and the target antibiotic. The cathode based on carbon CQ was tested for the degradation of another recalcitrant antibiotic (sulfamethoxazole) in a real wastewater treatment plant effluent by means of a heterogeneous EF treatment, showing good degradation performance., Ministerio de Economía y Competitividad | Ref. CTM 2017-87326-R, Fondos FEDER | Ref. CTM 2017-87326-R, Region Centre Val de Loire | Ref. MOSAIK , APR-IA 2019, Campus France (Program 'Make our planet great again'), Ministerio de Educación, Cultura y Deporte | Ref. FPU16/02644
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Tesis doctoral (DoctoralThesis)

Towards a future actual implementation of the heterogeneous electro-Fenton treatment for water remediation, Hacia una futura aplicación real del tratamiento electro-Fenton heterogéneo para la remediación de aguas, Cara a unha futura aplicación real do tratamento electro-Fenton heteroxéneo para a remediación de augas

  • Poza Nogueiras, Verónica
In recent years, the Advanced Oxidation Processes (AOPs) have emerged as a promising alternative for the effluent treatment due to the great versatility that show in the degradation of organic pollutants of diverse origins. This versatility lies in the powerful action of the agent generated in all the AOPs: the hydroxyl radical. However, the increasing in the use of synthetic pollutants, related to the expansion of industrialization, makes it necessary to validate these new technologies for its application in the removal of new pollutants, such as the so-called emerging contaminants. In this context, this thesis is focused in optimizing and controlling the AOPs used for the treatment of emerging contaminants. Different AOPs will be studied: i) anodic oxidation, where an electric field generates hydroxyl radicals on the anode surface, ii) Fenton process, where hydroxyl radicals are obtained through the reaction of hydrogen peroxide and iron and iii) the electro-Fenton process, where an electric field is applied and iron is added in order to generate the hydroxyl radical in both the anode surface and through the reaction of hydrogen peroxide and iron. For the various AOPs, the treatment will be optimized depending on the selected pollutant and taking into account the operating variables and the type of reactor employed. This optimization will be carried out by performing a design of experiments using specialised software (e.g. Design expert) which allows evaluating and analysing the obtained results., En los últimos años los Procesos de Oxidación Avanzada (POAs) se han revelado como una interesante alternativa en el tratamiento de efluentes debido a la versatilidad que demuestran en la degradación de contaminantes orgánicos de diferente naturaleza. Esta versatilidad radica en la potente acción que demuestra el agente generado en todos ellos, el radical hidroxilo. No obstante el aumento de contaminantes sintéticos, producto del incremento de la industrialización, obliga a validar estas nuevas tecnologías para su aplicación en la degradación de nuevos contaminantes como son los denominados contaminantes emergentes. En este contexto, esta tesis se centrará en el uso de herramientas de optimización y control para las aplicaciones de los POAs en el tratamiento de contaminantes emergentes. Se plantea el estudio de distintos POAs: i) oxidación anódica, en el que el campo eléctrico genera radicales hidroxilo sobre la superficie del ánodo, ii) Proceso Fenton, donde se obtienen radicales hidroxilo mediante la reacción de hierro y peróxido de hidrógeno y iii) el proceso electro-Fenton, en el que se aplica un campo eléctrico y se añade hierro para generar el radical hidroxilo tanto en la superficie del ánodo como por reacción entre peróxido de hidrógeno e hierro. Para los distintos POAs, se optimizará el tratamiento en función del contaminante seleccionado y teniendo en cuenta las variables de operación y tipo de reactor utilizado. Esta optimización se realizará mediante un diseño de experimentos utilizando software especializado (ej Design expert) que permitirá la evaluación y análisis de los resultados obtenidos., Nos últimos anos, os Procesos de Oxidación Avanzada (POAs) reveláronse como unha interesante alternativa no tratamento de efluentes debido á versatilidade que mostran na degradación de contaminantes orgánicos de diferente natureza. Esta versatilidade radica na potente acción que demostra o axente xerado en todos eles: o radical hidroxilo. Non obstante, o aumento de contaminantes sintéticos, produto do incremento da industrialización, obriga a validar estas novas tecnoloxías para a súa aplicación na degradación de novos contaminantes, como son os denominados contaminantes emerxentes. Neste contexto, esta tese centrarase no uso de ferramentas de optimización e control para as aplicacións dos POAs no tratamento de contaminantes emerxentes. Proponse o estudo de distintos POAs: i) oxidación anódica, onde o campo eléctrico xera radicais hidroxilo sobre a superficie do ánodo, ii) proceso Fenton, no que se obteñen radicais hidroxilo mediante a reacción de peróxido de hidróxeno e ferro e iii) proceso electro-Fenton, no que se aplica un campo eléctrico e se engade ferro para xerar o radical hidroxilo tanto na superficie do ánodo como por reacción entre peróxido de hidróxeno e ferro. Para os distintos POAs, optimizarase o tratamento en función do contaminante seleccionado e tendo en conta as variables de operación e tipo de reactor empregado. Esta optimización levarase a cabo mediante un deseño de experimentos empregando software especializado (ex: Design expert) que permitirá a avaliación e análise dos resultados obtidos., Ministerio de Economía y Competitividad | Ref. CTM2014-52471-R, Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED431C 2021/43, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/02644
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Prospects on integrated electrokinetic systems for decontamination of soil polluted with organic contaminants

  • Fernández Sanromán, Antía
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Overall, investigations about the utilization of electrokinetic technology alone or in combination with other processes have attracted particular attention in recent years for remediation of soils contaminated with heavy metals and organic compounds. This fact is due to its peculiar benefits together with its capability of operating in a fine and low-permeability matrix. This review aimed to ascertain the most recent developments on the commonly proposed integrated technologies (electrokinetic soil washing, electrokinetics coupled with permeable reactive barriers, electrokinetic-advanced oxidation processes, and bioelectrokinetic remediation), by evaluating the gaps, challenges, and trends of these systems in the last years. Special attention is paid to the current approaches for overcoming the main bottlenecks of electrokinetics concerning scale-up and reduction of electric energy consumption by integration of renewable energies., Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Xunta de Galicia | Ref. ED431C 2017/47
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Production of modified sunflowers seed shells for the removal of bisphenol A

  • Hayoun, Bahdja
  • Bourouina-Bacha, Saliha
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Benkhennouche-Bouchene, Hayette
  • Deflaoui, Ourida
  • Hamaidi-Maouche, Nassima
  • Bourouina, Mustapha
In this present study, an abundant, available lignocellulosic biomass, sunflower seed shells, SSS, was used as a precursor to prepare an effective eco-adsorbent by treatment with H2SO4. A study of the surface characteristics of raw and acid-treated SSS (ACS) has shown that the addition of H2SO4 greatly affected the physicochemical properties of the obtained eco-adsorbent, improving the BET surface area from 6.106 to 27.145 m2 g−1 and surface oxygen-rich functional groups. Batch experiments were performed to assess the removal efficiency of a phenolic compound, bisphenol A (BPA), on the adsorbents. Several parameters were evaluated and are discussed (contact time, pollutant concentration, adsorbent dosage, and pH), determining that the adsorption efficiency of BPA onto SSS was notably improved, from 20.56% to 87.81% when a sulfuric acid solution was used. Different canonical and stochastic isotherm models were evaluated to predict the experimental behaviour. A dynamic study was performed based on the models of reaction kinetics and those of mass transfer. The results showed that the adsorption kinetics of BPA obey the fractal like-kinetic model of Hill for all experimental conditions. The equilibrium data are well suited to the Hill–Sips isotherm model with a determination coefficient >0.999. The kinetic modelling also indicates that the adsorption processes of BPA onto ACS are exothermic and proceed through a physical mechanism. A mass transfer study, using simplified models, proved that the process is controlled by intraparticle and film resistances to mass transfer of the BPA, Algerian Ministry of Higher Education and Scientifc Research | Ref. A16N01UN060120190001, Ministerio de Ciencia, Innovación y Universidades | Ref. CTM2017- 87326-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Laccase multi-point covalent immobilization: characterization, kinetics, and its hydrophobicity applications

  • Othman, Abdelmageed M.
  • Sanromán Braga, María Ángeles
  • Moldes Moreira, Diego
Laccase from Myceliophthora thermophila was immobilized using one-point and multi-point covalent attachment on both a native and a modifed new commercial epoxy carrier (Immobead 150P). After 10 cycles of operation at pH 3.0 and temperature 70 °C, the multi-point covalently immobilized laccase on the modifed Immobead 150P performed best in terms of immobilization characteristics, retaining 95% of its initial activity. Thermodynamic parameters of thermal inactivation emphasized the positive impact of the immobilization procedure. At 50 °C, the immobilized and free enzyme activity levels dropped by 27 and 73%, respectively, after 48 h of incubation. The immobilized enzyme enhanced its stability in alkaline conditions, resuming 95% of its original activity after 3 h at pH 9.0. Immobilization reduced substrate afnity because the free laccase’s Km value was lower than that of the immobilized laccase. Finally, the application of immobilized laccase in an innovative wood treatment process was tested by grafting lauryl gallate (LG) in order to provide hydrophobic properties to the wood. The results showed a relative water contact angle of 85.7% for treated wood, whereas the control showed only 26.6%, after 4 min of contact between water and beechwood surface., Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Xunta de Galicia | Ref. ED431C 2017/47
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Exploring the pressurized heterogeneous electro-Fenton process and modelling the system

  • Poza Nogueiras, Verónica
  • Moratalla, Ángela
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Sáez, Cristina
  • Rodrigo, Manuel A.
In this research, a bench-scale installation was tested for the heterogeneous electro-Fenton treatment of clofibric acid. The setup consists of a pressurized flow-through electrochemical cell equipped with a catalyst fluidized-bed and aerated with a jet mixer. The novelty of the research is two-fold: the use of the pressurized-jet aerator on an electro-Fenton treatment is tested and it is one of the first studies combining pressure with heterogeneous catalysis in electro-Fenton. Moderate relative pressures, up to 2 bar, were analyzed. Initially, the electrogeneration of hydrogen peroxide was tested, showing that it is remarkably boosted by the application of pressure. Then, the elimination of clofibric acid by means of an electro-Fenton treatment was carried out at 0.12 and 0.25 A, using iron-containing alginate beads as the catalyst. Regardless of the current intensity, the increase from atmospheric pressure to 1 gauge bar boosted the elimination of the pollutant and reduced the specific energy consumption of the electrochemical cell. Specifically, at 0.25 A an abatement higher than 98% was achieved in 8 h at atmospheric pressure while only 1 h was required at 1 bar of gauge pressure. However, a further increase of the pressure to 2 bar did not report a major improvement. Moreover, the effect of pressure on the catalyst was analyzed, concluding that the integrity of the alginate beads was not compromised by pressure. In fact, the iron leaching was very similar at 0, 1 and 2 bar: around 30% after 8 h of treatment. Finally, a mathematical model was developed, using the experimental data to obtain the necessary fitting parameters, which allowed to understand better the behavior of the bench-scale reaction system., Ministerio de Ciencia, Innovación y Universidades | Ref. CTQ2017-90659-REDT, Junta de Comunidades de Castilla-La Mancha | Ref. SBPLY/17/180501/000396, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/02644, Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Agencia Estatal de Investigación | Ref. PID2019-110904RB-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Electro-Fenton degradation of a ternary pharmaceutical mixture and its application in the regeneration of spent biochar

  • Puga Pazo, Antón
  • Moreira, Manuela M.
  • Figueiredo, Sónia A
  • Delerue Matos, Cristina
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, This study proposed an integrated valorisation system, by combining adsorption and electro-Fenton processes for fast and effective micropollutant remediation of a complex pharmaceutical mixture. The pharmaceuticals venlafaxine, fluoxetine and trazodone, commonly detected in the environment (river water and sediment), were selected in this study as target pollutants. Initially, the electro-Fenton degradation process of the ternary mixture was optimised. For this, a Box-Behnken experimental design was used and the degradation of each pollutant, as a response function, was evaluated using three key operational process parameters (iron concentration, current intensity and solution pH). The pharmaceutical mixture was removed by total adsorption onto the biochar, the regeneration of which was then carried out under the optimal electro-Fenton conditions (0.24 mA, 0.33 mM Fe2+ and pH 3.2). In addition, different options in relation to the presence of iron were considered: i) iron dissolved in aqueous solution; ii) iron supported on the biochar; iii) no addition of iron (“self-cleaning”). The results confirmed that the natural content of iron in the biochar was enough to catalyse the electro-Fenton regeneration. The adsorption-electro-Fenton regeneration process was repeated over several cycles with no reduction in the efficiency of either process. Finally, this combination (adsorption and electro-Fenton process) was tested using an aqueous matrix from a wastewater treatment plant., Ministerio de Economía y Competitividad | Ref. CTM2017- 87326-R, Fundação para a Ciência e a Tecnologia | Ref. UIDB/50006/2020, Fundação para a Ciência e a Tecnologia | Ref. UID /50006/2020, Fundação para a Ciência e a Tecnologia | Ref. CEECIND/02702/2017, Ministerio de Economía y Competitividad | Ref. CTQ2017-90659-REDT
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Sulfate radicals-based technology as a promising strategy for wastewater

  • Arellano Pardo, María
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
This study was focused on the generation of sulfate radicals and their applicability as powerful oxidants for degrading complex organic compounds with the final objective of operating in flow systems. To this end, the removal of two compounds from the pharmaceutical industry was assessed, lissamine green and prednisolone. Initially, sulfate radicals were generated by the activation of persulfate with iron as homogenous catalyst, and the key parameters involved in the process, as catalyst concentration and oxidant dosage, were evaluated. Furthermore, with the aim of preventing the secondary contamination due to metal leaching and to be operate in a continuous mode, a heterogeneous catalyst was developed. For it, the iron was fixed on a cationic resin as Amberlite IR120 Na+ form. It was demonstrated that the removal of both pollutants increases with greater catalyst dosages, achieving a decay of 85% within 25 min with 30 g·L−1 of catalyst. Moreover, the reuse capability of the catalyst was tested, illustrating that it is rough enough for its reuse. Conversely, in order to develop a continuous treatment in flow system, a fixed bed reactor was constructed and its feasibility was proven. Different experiments with residence times from 10 min to 60 min were performed, obtaining a removal level of ≈95% and 90% for prednisolone and lissamine green, respectively, at residence time of 60 min. In conclusion, the potential of sulfate radicals-based technology for degrading organic contaminants has been demonstrated., Xunta de Galicia | Ref. ED431C 2017/47, Ministerio de Economía y Competitividad | Ref. CTM2017-87326-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Continuous adsorption studies of pharmaceuticals in multicomponent mixtures by agroforestry biochar

  • Puga Pazo, Antón
  • Moreira, Manuela M.
  • Pazos Currás, Marta María
  • Figueiredo, Sónia A.
  • Sanromán Braga, María Ángeles
  • Delerue Matos, Cristina
  • Rosales Villanueva, Emilio
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, In this study, the adsorption of a multicomponent mixture of active pharmaceutical compounds, such as Venlafaxine (VLX), Trazodone (TRZ) and Fluoxetine (FLX), was studied in a biochar fixed-bed column. The selection of appropriate biochar (eucalyptus, grapevine cane and holm tree biochar) as an adsorbent was carried out through batch assays. An insight into the adsorption mechanism and its correlation with the chosen biochars was performed, showing that electron donor/acceptor interaction is the main mechanism involved. Equilibrium and kinetic batch adsorption experiments were performed and the results demonstrated that eucalyptus biochar was the most viable option for the removal of the pollutants, individually and combined. Column adsorption experiments were performed and Thomas, Yoon-Nelson and Yan models were adjusted to the breakthrough curves. This multicomponent system exhibited a synergetic behavior for TRZ and an antagonist for VLX and FLX, when compared to the single and multicomponent systems previously evaluated in batch assays. The treatment of real wastewaters, spiked with pollutants, has demonstrated the removal efficiency of multicomponent mixtures. Finally, the adsorbent regeneration by elution in different solutions was also investigated and methanol proved to be the most effective eluent for the column regeneration., Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Xunta de Galicia | Ref. ED431C 2021/43, Fundação para a Ciência e a Tecnologia | Ref. CEECIND/02702/2017, Fundação para a Ciência e a Tecnologia | Ref. UIDB/50006/2020, Fundação para a Ciência e a Tecnologia | Ref. UIDP/50006/2020
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Laccase-oriented immobilization using concanavalin A as an approach for efficient glycoproteins immobilization and Its application to the removal of aqueous phenolics

  • Othman, Abdelmageed M.
  • Sanromán Braga, María Ángeles
  • Moldes Moreira, Diego
An expanding number of human activities are contributing to the rising levels of aromatic compounds, which pose a major threat to the ecosystem. However, readily available microbial enzymes might be used to remediate contaminated wastewater in an economical and environmentally benign manner. In this study, an efficient method of laccase-oriented immobilization on modified Immobead 150P was proposed. The oriented immobilization technique using aminated laccase exceeds in both protein loading onto the carrier (4.26 mg/g) and immobilization yield (93.57%) due to the availability of more active sites. The oriented aminated laccase preserves 100% and 95% of its original activity after six and ten cycles of operation, respectively. The thermal stability performance of the oriented enzyme was the best among both free and random immobilized forms, since it was able to conserve 79% and 44% of its initial activity after 6 h at 50 °C and 60 °C, respectively. The ideal pH of oriented immobilized laccase was altered from 3.0 to 4.0, and it was more stable than both free and random immobilized laccases at pH 7.0. Finally, the integration of the adsorption capacity of Immobead 150P and the biodegradation ability of laccase promises the efficient removal of aqueous phenolics. Oriented immobilized laccase may provide a significant new approach for wastewater treatment, according to these findings., Xunta de Galicia | Ref. ED431C 2021-43, Agencia Estatal de Investigación | Ref. CTM2017-87326-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Iron-loaded catalytic silicate adsorbents: synthesis, characterization, electroregeneration and application for continuous removal of 1-butylpyridinium chloride

  • Ouiriemmi , Imen
  • Diez Sarabia, Aida Maria
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
This research proposes the application of iron-loaded sepiolite (S-Fe) as a catalytic adsorbent for the unreported 1-butylpyridinium chloride ([bpy] Cl) treatment in an aqueous medium. Initially, sepiolite was selected as an inexpensive and efficacious adsorbent for [bpy] Cl elimination. After that, sepiolite was loaded with iron for the subsequent electro-Fenton (EF) regeneration treatment. Once kinetic and isotherm studies were performed, providing respectively almost instantaneous adsorption (20 min) and an uptake of 22.85 mg/g, [bpy] Cl adsorption onto S-Fe was studied in continuous mode. The obtained breakthrough curve was analyzed using three standard breakthrough models, being Yoon–Nelson and Thomas the most suitable adjustments. Afterwards, S-Fe regeneration by the EF process was conducted using this iron-loaded silicate material as a heterogeneous catalyst. Under optimized operational conditions (current intensity 300 mA and Na2SO4 0.3 M), complete adsorbent regeneration was achieved in 10 h. The total mineralization of [bpy] Cl was reached within 24 h and among seven carboxylic acids detected, oxalic and acetic acids seem to be the primary carboxylic acids produced by [bpy] Cl degradation. Finally, S-Fe was efficiently used in four consecutive adsorption–regeneration cycles without a noticeable reduction in its adsorption capacity, opening a path for future uses., Ministerio de Economía, Industria y Competitividad | Ref. CTQ2017-90659-REDT, Xunta de Galicia | Ref. ED481B 2019/091, Ministerio de Ciencia, Innovación y Universidades | Ref. CTM2017-87326-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Methodology for decentralized analysis: detection, quantification and in situ monitoring of pharmaceutical formulations removal by electro-Fenton

  • Caruncho Pérez, Sara
  • Prado Comesaña, Ana M.
  • Arellano Pardo, María
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
Water quality is essential to both human and ecosystem health, and a fast detection of emerging pollutants is claimed, along with effective wastewater treatment plants to eliminate these types of substances. The goal of this study was the development of a sensitive and selective methodology to customize a handle device that meets this demand. Clozapine and its pharmacological formulation, Leponex®, were used as a model. The results obtained from the studies by differential pulse voltammetry (DPV) demonstrated that this methodology allows a simpler and cheaper decentralized analysis without losing sensitivity, performing electrochemical measurements in situ, in real-time and directly without sample treatment, with a good precision (RSD 3.7 %) and excellent accuracy (recoveries between 97.6 and 99.9 %). Moreover, the methodology was successfully used for direct follow-up the medicine removal in real samples by electro-Fenton (EF) treatment. The results gathered showed a relative error of less than 2 % concerning the measurements made with the conventional potentiostat. Bearing this in mind, the effectiveness of these electrochemical techniques used in tandem with the comfort and high specificity offered by the portable device, a more exhaustive control of water quality can be achieved, thus improving the quality of life in the planet., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED431D 2017/06
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Screen-printed GPH electrode modified with Ru nanoplates and PoPD polymer film for NADH sensing: Design and characterization

  • Baradoke, Ausra
  • Pastoriza Santos, Isabel
  • González Romero, Elisa
In this work, a simple, selective and stable strategy for encapsulation of triangular ruthenium nanoplates (RuNPs) through o-Phenylenediamine (oPD) polymerization on graphene modified screen-printed carbon electrode (SPEGPH) was demonstrated. o-Phenylenediamine polymer (PoPD) film provided a suitable microenvironment for RuNPs immobilization. Synthesis of RuNPs was characterized by transmission electron microscope (TEM) and electrochemical methods including cyclic voltammetry (CV) and linear sweep voltammetry (LSV). Encapsulation or incorporation of RuNPs through PoPD were carried out following three different strategies and the resulting platforms were investigated using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The electrocatalytic performance of RuNPs-PoPD-GPH platform was demonstrated using the NADH oxidation as model electrochemical reaction. The incorporation of 18 ± 3 nm RuNPs onto PoPD decreased the NADH oxidation potential by ca. 350±5mV in comparison to bare SPEGPH as well as a remarkable enhance of sensitivity to NADH detection. Therefore, RuNPs have provided electron transfer with a strong catalytic effect for NADH oxidation representing a promising application in sensors., Xunta de Galicia | Ref. ED431C 2016-048, Ministerio de Ciencia e Innovación | Ref. CTQ2011-23167, Agencia Estatal de Investigación | Ref. MAT2016-77809-R, Ministerio de Ciencia e Innovación | Ref. CTQ2011-28157, Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Ministerio de Ciencia e Innovación | Ref. PRI-AIBPT-2011-1096
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Tesis doctoral (DoctoralThesis)

Combination of advanced oxidation technologies and selective adsorption for the treatment of microcontaminants, Combinación de tecnologías de oxidación avanzada y adsorción selectiva para el tratamiento de micro-contaminantes, Combinación de tecnoloxías de oxidación avanzada e adsorción selectiva para o tratamento de micro-contaminantes

  • Puga Pazo, Antón
The impacts of increasing industrialization and its effects on environmental deterioration requires the development of alternative treatment technologies for the removal of the new generated pollutants. Among them, the so-called emerging micro-contaminants, whose presence in the environment is not necessarily new but cause environmental problems, are a matter of concern that require solutions. In recent years, advanced oxidation processes (AOPs) became a suitable alternative in the treatment of effluents due to their versatility in the degradation of organic pollutants of different nature. This property lies in the powerful action shown by the agent generated in all of them: the hydroxyl radical. However, and due to the low concentration in which the pollutants are found in wastewater, their previous concentration would allow to improve the water treatment by AOP and favour the elimination in an even more efficient way. Techniques based on adsorption are good alternatives to facilitate this process. In this context, this doctoral thesis will be focused on the application of various technologies such as adsorption and electro-adsorption for the concentration of micro-contaminants and, thereby, reducing the volume of liquid to be treated; and, on the other hand, the coupling with AOP processes for the final treatment of concentrated emerging contaminants. Therefore, it will be necessary to optimize separately the different technologies, and in the specific case of the AOPs, a special interest will be given in the development of new heterogeneous catalysts and the optimization of the processes for operating in a continuous flow system. In the last phase of the thesis, the design and implementation of a hybrid treatment system will be carried out for the wastewater treatment encompassing the two mentioned steps. Thus, it will be possible to concentrate and degrade the micro-contaminants to complete the cycle of this study, El aumento del deterioro medioambiental debido al incremento de la industrialización obliga a validar nuevas tecnologías para su aplicación en la degradación de nuevos contaminantes, como son los denominados micro-contaminantes emergentes, cuya presencia en el medio ambiente no es necesariamente nueva, ni se presentan en concentraciones elevadas, pero sí generan problemas medioambientales que requieren de solución. En los últimos años, los procesos de oxidación avanzada (AOPs) se revelaron como una interesante alternativa en el tratamiento de efluentes debido a la versatilidad que muestran en la degradación de contaminantes orgánicos de diferente naturaleza. Esta propiedad radica en la potente acción que demuestra el agente generado en todos ellos: el radical hidroxilo. Debido a la baja concentración en la que los contaminantes se encuentran, su previa concentración permitiría mejorar el tratamiento de las aguas mediante AOP y favorecer la eliminación de un modo todavía más eficaz. Las técnicas basadas en adsorción se presentan como buenas alternativas para facilitar dicho proceso. En este contexto, esta tesis doctoral se centrará en la aplicación de diversas tecnologías como la adsorción y la electro-adsorción para la concentración de los micro-contaminantes y con ello reducir el volumen de líquido a tratar; y, por otra parte, el acoplamiento de procesos de AOPs para el tratamiento final de los contaminantes emergentes concentrados. Para ello, será necesaria la optimización por separado de las diversas tecnologías, y en el caso concreto de los AOPs, se prestará especial interés en el desarrollo de nuevos catalizadores heterogéneos y la optimización de los procesos operando en sistema de flujo en continuo. Ya en la última fase de la tesis, se llevará a cabo el diseño y ejecución de un sistema para la realización de un tratamiento híbrido que englobe las dos partes mencionadas, con el que se conseguirá concentrar y degradar los micro-contaminantes para completar así el ciclo de este estudio., O aumento do deterioro medioambiental debido ao incremento da industrialización obriga a validar novas tecnoloxías para a súa aplicación na degradación de novos contaminantes, como son os denominados micro-contaminantes emerxentes, cuxa presenza no medio ambiente non é necesariamente nova, nin se atopan en concentracións elevadas, pero si xeneran problemas medioambientais que requiren unha solución. Nos últimos anos, os procesos de oxidación avanzada (AOPs) reveláronse como unha interesante alternativa no tratamento de efluentes pola versatilidade que mostran na degradación de contaminantes orgánicos de diferente natureza. Esta propiedade radica na potente acción que mostra o axente xerado en todos eles: o radical hidroxilo. Debido á baixa concentración na que os contaminantes se atopan, a súa previa concentración permitiría mellorar o tratamento de augas mediante AOPs favorecendo a súa eliminación dunha maneira todavía máis eficaz. As técnicas basadas na adsorción preséntanse como boas alternativas para facilitar dito proceso. Neste contexto, esta tese doctoral centrarase na aplicación de diversas tecnoloxías como a adsorción e a electro-adsorción para a concentración dos micro-contaminantes e con isto reducir o volume de líquido a tratar; e, por outra parte, o acoplamento de procesos de AOPs para o tratamento final dos contaminantes emerxentes concentrados. Con isto, será necesaria a optimización por separado das diversas tecnoloxías, e no caso concreto dos AOPs, prestarase especial interés no deseño de novos catalizadores heteroxéneos e a optimización dos procesos operando nun sistema de fluxo en continuo. Xa na última fase da tese, levarase á práctica o deseño e a execución dun sistema para a realización dun tratamento híbrido que englobe as dúas partes mencionadas, co que se conseguirá concentrar e degradar os micro-contaminantes para completar así o ciclo deste estudo., Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED431C 2021/43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Differential pulse voltammetry as a powerful tool to monitor the electro-Fenton process

  • Arellano Pardo, María
  • Oturan, Nihal
  • Oturan, Mehmet A
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
This study presents the applicability of differential pulse voltammetry (DPV) technique to carry out in-depth research of electro-Fenton process. To this end, the degradation of the ionic liquid p-xylene-bis(n-pyridinium bromide) was performed, and the main parameters that influence this process were also evaluated. DPV allowed monitoring the evolution of Fe(III) reduction as redox probe, enabling to examine the degradation of ionic liquid and the effect of the potential as well as main intermediates formed throughout the process. By using DPV tool, application of sequential current intensities along the electro-Fenton process was evaluated as alternative to reduce the energy consumption keeping the same efficiency. Based on the profile of the voltammetric curves and the determination of hydroxyl radicals, currents of 50 and 600 mA were chosen for testing a bi-electrical current system. Thus, a current of 600 mA was applied for 30 min followed by 50 mA for 60 min (600, 50), and vice versa (50, 600). Both trials achieved a total organic carbon (TOC) abatement around 60%, being the system (600, 50) less energy consuming (0.24 kWh g−1 TOC) than the other system (50, 600) (5.90 kWh g−1 TOC). Furthermore, chromatographic analyses of inorganic ions allowed validating the attained results. Finally, the feasibility of this bi-electrical current process to a real matrix was successfully carried out, achieving the same TOC abatement when working with synthetic solution. This fact demonstrated the potential of the bi-electrical current electro-Fenton system and its suitability for more complex matrix, as well as the potential of DPV technique to deeply study the electro-Fenton process., Ministerio de Economía y Competitividad | Ref. CTM2017- 87326-R, Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED431D 2017/06
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Screen-printed electrodes-based technology: environmental application to real time monitoring of phenolic degradation by phytoremediation with horseradish roots

  • González Costas, Javier Marcos
  • Gómez Fernández, Siria
  • García Sánchez, Josefa
  • González Romero, Elisa
The following is a description of a simple strategy for monitoring phenolic pollutants from highly-contaminated water samples. These phenolic compounds are removed from tap water using horseradish roots (Raphanus sativus) that contain peroxidase as catalyst and H2O2 to generate hydroxyl radicals. The later (•OH) acts on the aromatic structure, causing them to degrade to non-toxic by-products. The tool used to follow up the evolution of the process is based on screen-printed carbon electrodes (SPCEs) as electrochemical sensor for simultaneous detection of hydroquinone (Epa at 0.047 V), m-cresol (Epa at 0.506 V) and 4-nitrophenol (Epa at 0.696 V) by differential pulse voltammetry (DPV). This electroanalytical methodology enables close monitoring of the situation and rapid sensor response time. Furthermore, this direct methodology works for opaque and heterogeneous samples, as tap water with chopped horseradish roots, without any treatment of samples previously to the analysis. For better knowledge of the electrodic-transfer process, the electrochemical behavior of these phenolic compounds by cyclic voltammetry (CV) is also included. This simple methodology shows a low detection limit (below to 5 μM) and an excellent selectivity (peak potential separation between them up to 200 mV or greater) in a linear range of three orders of concentration (from 1–5 μM to 1 mM) for all of the analytes studied. The DPV responses of the phenolic compounds during the phytoremediation process are simultaneously monitored by this direct, cheap, reproducible (RSD < 2.3%) and rapid DPV-SPCE electroanalytical methodology. Portable device as electrochemical sensor with this optimized and validated technology can be applied for decentralized analysis, on-site assays and rapid screening purposes. The use of the horseradish roots achieves the total elimination of phenolic pollutants in concentrations 1000 times higher than the legal limits in less than 1 h., Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED431623 2017/11
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Heterogeneous Electro-Fenton-like designs for the disposal of 2-phenylphenol from water

  • Fernández Sanromán, Antía
  • Martínez Treinta, Rocío
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
The hunt for efficient and environmentally friendly degradation processes has positioned the heterogeneous advanced oxidation processes as an alternative more interesting and economical rather than homogenous processes. Hence, the current study lies in investigating the efficiency of different heterogeneous catalysts using transition metals in order to prevent the generation of iron sludge and to extend the catalogue of possible catalysts to be used in advanced oxidation processes. In this study, nickel and zinc were tested and the ability for radical-generation degradation capacity of both ions as homogeneous was evaluated in the electro-Fenton-like degradation of 2-phenylphenol. In both cases, the degradation profiles followed a first-order kinetic model with the highest degradation rate for nickel (1 mM) with 2-phenylphenol removal level of 90.12% and a total organic reduction near 70% in 2 h. To synthesise the heterogeneous nickel catalyst, this transition metal was fixed on perlite by hydrothermal treatment and in a biochar or carbon nanofibers by adsorption. From the removal results using the three synthesized catalysts, it is concluded that the best catalysts were obtained by inclusion of nickel on biochar or nanofibers achieving in both with removal around 80% before 1 h. Thus, to synthetize a nickel electrocatalyst, nickel doped nanofibers were included on carbon felt. To do this, the amount of carbon black, nickel nanofibers and polytetrafluoroethylene to add on the carbon felt was optimized by Taguchi design. The obtained results revealed that under the optimised conditions, a near-complete removal was achieved after 2 h with high stability of the nickel electrocatalyst that open the applicability of this heterogeneous system to operate in flow systems., Ministerio de Ciencia e Innovación | Ref. PDC2021-121394-I00, Ministerio de Ciencia e Innovación | Ref. CTM 2017-87326-R, Xunta de Galicia | Ref. ED431C 2021-43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Pd–Au heteropentamers: selective growth of Au on Pd tetrahedral nanoparticles with enhanced electrocatalytic activity

  • Zheng , Guangchao
  • Carbó Argibay, Enrique
  • González Romero, Elisa
  • Pastoriza Santos, Isabel
  • Pérez Juste, Jorge
We developed a seed-mediated approach for the selective growth of Au-on-Pd 6 tetrahedral nanoparticles giving rise to Pd−Au heteropentamers. The size of the Au domains in the 7 heterostructures could be finely tuned from 4 to 8 nm. High-resolution transmission electron 8 microscopy characterization demonstrated that the heteromers are single crystalline indicating an 9 epitaxial growth of Au on Pd. The modification of screen-printed carbon electrodes with Pd−Au 10 heteromers shows an improved electrocatalytic activity., Xunta de Galicia | Ref. GRC ED431C 2016-048, Xunta de Galicia | Ref. ReGaLIs ED431623 2017/11, Ministerio de Economía, Industria y Competitividad | Ref. MAT2016-77809-R, Ministerio de Economía y Competitividad | Ref. CTM2017- 87326-R, Agencia Estatal de Investigación | Ref. RED2018-102412-T, Unión Europea-FEDER (Interreg V-A—España-Portugal) | Ref. 0245_IBEROS_1_E
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Electro-reversible adsorption as a versatile tool for the removal of diclofenac from wastewater

  • Puga Pazo, Antón
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, In this study, adsorption of a non-steroidal anti-inflammatory drug such as Diclofenac (DCF) on a commercial carbonaceous aerogel honeycomb monolith (NANOLIT®-NQ40) was ascertained. Based on, the overall design of an adsorption treatment should include a feasible regeneration process for the spent adsorbent. In this work, the adsorption/desorption process was ameliorated by coupling of electrochemical technology (anodic/cathodic polarisation). It was determined that the anodic polarisation enhanced the DCF removal and it was related with the applied voltage and the disposition of the electrodes into the bulk solution. Anodic polarisation at optimal conditions (voltage 0.9 V, electrodes gap 2.5 cm and electrolyte concentration higher than 1 mM) provoked an enhancement (around 30%) in the DCF adsorption rate. The spent aerogel regeneration method for the adsorbed or electro-adsorbed DCF was investigated and cathodic polarisation proved to be a viable regeneration alternative attaining the total regeneration of aerogel. The electro-desorption mechanism seemed to be linked to the generation of repulsive intermolecular forces in the aerogel surface. Finally, the sequential electro-adsorption/electro-desorption process was performed in successive cycles. The results confirmed the feasibility of this strategy, maintaining the efficiency with no structural changes in the monolith after several cycles being the electro-reversible adsorption of pollutants on aerogel a promising technology for the removal of pharmaceuticals from wastewater., Agencia Estatal de Investigación | Ref. CTM 2017-87326-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Tesis doctoral (DoctoralThesis)

Techniques integration for degrading emerging pollutants and on the horizon, Integración de técnicas para degradar contaminantes emergentes y en el horizonte, Integración de técnicas para degradar contaminantes emerxentes e no horizonte

  • Arellano Pardo, María
Ionic liquids (ILs) are an alternative to conventional organic solvents and they have great potential to improve and develop new processes in Green Chemistry. This paradigmatic characteristic has contributed to the fact that ILs have overcome the laboratory scale and they are postulated as candidates for their production and use on a large scale. Thus, the first family of ILs based on imidazolium cation is already applied at the industrial level, and consequently it has been registered in the REACH regulation of chemical substances. One of the differentiating aspects of these compounds is their high thermochemical stability, which in turn can pose a high environmental risk due to their persistence and toxicity after their release into aquatic and edaphic ecosystems. Based on these considerations, the search for effective remediation methods according to the family to be treated is a priority research line within the framework of the current Community Water Directive (2000/60/EC) and, in particular, ILs have been classified as “pollutants on the horizon”. Therefore, it is necessary to advance in the development of technically and economically viable technologies that allow to degrade these liquid salts in an adequate time, with the minimum environmental and social impact. However, the lack of in-depth studies on this subject makes it necessary to present this Thesis focused on the treatment of these pollutants on the horizon. To begin with, the degradation capacity of hydroxyl or sulfate radicals will be evaluated, followed by the optimization of the chosen process. The complex nature of these pollutants makes their complete remediation by conventional technologies difficult and costly. That is why in recent years, as an alternative to reduce the overall costs of the process and to improve the overall effectiveness of the treatment, the use of electrochemical biological sequential treatments is being proposed. Thus, those ILs that are not biodegradable by conventional biological processes could be biodegraded after a short electrochemical treatment, which would be sufficient to reduce the toxicity of the source contaminants. In this context, one of the objectives of this research will be the design of hybrid strategies that combine electrochemical and biological systems for the degradation of ILs in water. However, ionic liquids are not found alone in the aqueous medium, other contaminants such as pharmaceutical compounds may appear. Therefore, its degradation will also be evaluated in this Thesis. Further, in this Thesis it is planned to develop a new tool to optimize in situ the reaction that occurs in the electrochemical process that is being carried out. In this way, differential pulse voltammetry is applied to obtain a better understanding of the reactions and processes that take place in the reaction medium, to develop a more efficient treatment for the degradation of these pollutants. This will allow solving the presence of new pollutants on the horizon of anthropogenic origin, so the benefits of this Thesis reach not only the chemical industry, but society in general, by reducing the environmental impact that could be the growing application of these solvents., Los líquidos iónicos (LIs) son una alternativa a los disolventes orgánicos convencionales y presentan un gran potencial para mejorar y desarrollar nuevos procesos en Química Verde. Esta característica paradigmática ha contribuido a que los LIs hayan superado la escala laboratorio y se postulen como candidatos para su producción y uso a gran escala. Así, la primera familia de LIs basada en el catión imidazolio ya se aplica a nivel industrial, y en consecuencia ha sido registrada en el reglamento REACH de sustancias químicas. Uno de los aspectos diferenciadores de estos compuestos hace referencia a su elevada estabilidad termoquímica, que a su vez puede suponer un gran riesgo medioambiental por su persistencia y toxicidad tras su vertido en ecosistemas acuáticos y edáficos. A tenor de estas consideraciones, la búsqueda de métodos de remediación eficaces en función de la familia a tratar es una línea de investigación prioritaria en el marco de la actual directiva comunitaria del agua (2000/60/EC) y, en concreto, los LIs ya han sido catalogados como “contaminantes en el horizonte”. Por lo tanto, es necesario avanzar en el desarrollo de tecnologías viables técnica y económicamente que permitan degradar estas sales líquidas en un tiempo adecuado, con el mínimo impacto ambiental y social. Sin embargo, la escasez de estudios en profundidad sobre esta temática hace necesario plantear la presente Tesis centrada en el tratamiento de estos contaminantes en el horizonte. Para empezar, se evaluará la capacidad de degradación de los radicales hidroxilo y los radicales sulfato, seguido de la optimización del proceso escogido. La compleja naturaleza de estos compuestos hace difícil y costosa su completa remediación por tecnologías convencionales. Es por ello que en los últimos años, como alternativa para reducir los costes globales del proceso y mejorar la eficacia del tratamiento, se está proponiendo el empleo de tratamientos secuenciales electroquímicos-biológicos. De ese modo, aquellos LIs que no son biodegradables por procesos biológicos convencionales, podrían ser biodegradados tras un corto tratamiento electroquímico, suficiente para reducir la toxicidad de los contaminantes de origen. En este contexto, uno de los objetivos de la investigación será el diseño de estrategias híbridas que aúnen sistemas electroquímicos y biológicos para la degradación de LIs en medios acuosos. No obstante, los líquidos iónicos no se encuentran solos en el medio acuoso, pudiendo aparecer otros contaminantes como los compuestos farmacéuticos. Por ello, en la presente Tesis también se evaluará su degradación. A mayores, en esta Tesis se planea desarrollar una nueva herramienta para optimizar in situ la reacción que ocurre en el proceso electroquímico que se está llevando a cabo. De esta forma, se aplica la voltamperometría de pulso diferencial para obtener un mejor conocimiento de las reacciones y procesos que ocurren en el medio de reacción, para desarrollar un tratamiento más eficiente para la degradación de estos contaminantes. Así, se permitirá dar solución a la presencia de nuevos contaminantes en el horizonte de origen antropogénico, por lo que los beneficios de esta Tesis alcanzan no sólo a la industria química, sino a la sociedad en general, por la reducción del impacto medioambiental que podría suponer la creciente aplicación de estos disolventes., Os líquidos iónicos (LIs) son unha alternativa ós disolventes orgánicos convencionais e presentan un gran potencial para mellorar e desenrolar novos procesos en Química Verde. Esta característica paradigmática contribuíu a que os LIs superasen a escala laboratorio e se postulen como candidatos para a súa produción e uso a gran escala. Así, a primeira familia de LIs baseada no catión imidazolio xa se aplica a nivel industrial, en consecuencia foi rexistrada na regulación REACH de sustancias químicas. Un dos aspectos distintivos destes compostos fai referencia a súa elevada estabilidade termoquímica, que á súa vez pode supoñer un gran risco medioambiental pola súa persistencia e toxicidade trala súa vertedura en ecosistemas acuáticos e do solo. Con base nestas consideracións, a procura de métodos de remoción eficaces en función da familia a tratar é unha liña de investigación prioritaria no marco da actual directiva comunitaria da auga (2000/60/EC) e, en concreto, os LIs xa foron catalogados como “contaminantes no horizonte”. Polo tanto, é necesario avanzar no desenrolo de tecnoloxías viables técnica e economicamente que permitan degradar estas sales líquidas nun tempo adecuado, co mínimo impacto ambiental e social. Sen embargo, a escaseza de estudos en profundidade sobre esta temática fai necesario propor a presente Tese centrada no tratamento destes contaminantes no horizonte. Para comezar, avaliarase a capacidade de degradación dos radicais hidroxilo e os radicais sulfato, seguido da optimización do proceso elixido. A complexa natureza destes compostos fai difícil e custosa a súa completa remoción por tecnoloxías convencionais. É por iso que nos últimos anos, como alternativa para reducir os custes globais do proceso e mellorar a eficacia do tratamento, estase propondo o emprego de tratamentos secuenciais electroquímicos biolóxicos. Dese modo, aqueles LIs que non son biodegradables por procesos biolóxicos convencionais, poderían ser biodegradados tras un corto tratamento electroquímico, suficiente para reducir a toxicidade dos contaminantes de orixe. Neste contexto, un dos obxectivos da investigación será o deseño de estratexias híbridas que combinen sistemas electroquímicos e biolóxicos para a degradación de LIs en medios acuosos. Non obstante, os líquidos iónicos non se atopan solos no medio acuoso, podendo aparecer outros contaminantes como os compostos farmacéuticos. Por elo, na presente Tese tamén se avaliará a súa degradación. A maiores, nesta Tese planéase desenvolver unha nova ferramenta para optimizar in situ a reacción que ocorre no proceso electroquímico que se está levando a cabo. Deste xeito, aplícase a voltamperometría de pulso diferencial para obter un mellor coñecemento das reaccións e procesos que ocorren no medio de reacción, para desenrolar un tratamento mais eficiente para a degradación destes contaminantes. Así, permitirase dar solución á presenza de novos contaminantes no horizonte de orixe antropoxénico, polo que os beneficios desta Tese alcanzan non só á industria química, senón á sociedade en xeral, pola redución do impacto medioambiental que podería supor a crecente aplicación destes disolventes., Ministerio de Economía y Competitividad | Ref. CTM2014-52471-R, Ministerio de Economía y Competitividad | Ref. CTM2017- 87326-R, Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED481A 2017/284
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Tesis doctoral (DoctoralThesis)

Application of biomaterials in aquatic contaminated environments, Biomateriales para su aplicación en la remediación de ambientes acuáticos contaminados, Biomateriais para a súa aplicación na remediación de ambientes acuáticos contaminados

  • Escudero Curiel, Silvia
The recovery of waste produced in various activities and allowing its return to the productive system within the goal of zero waste and as one of the maxims of the circular economy allows an improvement of both economic and environmental sustainability. These waste, both organic and inorganic, can be used for their application in environmental remediation processes. The presence of emerging pollutants in aquatic environments represents a significant problem given the pernicious effects they generate in living beings and their elimination focuses on new research for their elimination with various technologies such as adsorption and where it is required to obtain new more effective adsorbents . In this thesis project, we intend to develop new biomaterials for the treatment of aquatic environments contaminated with emerging pollutants of diverse nature. For this, it is proposed, on the one hand, to evaluate a mixture of different adsorbent biomaterials (such as agro-industrial waste) as well as the production of different carbonaceous materials obtained by various pretreatments followed by thermal treatments, which will be optimized, of these residues. The new adsorbents will be characterized and the elimination of representative compounds of contamination in polluted effluents will be investigated both individually and combined, relying on tools such as the design of experiments. The benignity of the proposed remediation strategies will be determined through toxicity analysis. The operating conditions will be optimized and the laboratory scale system will be studied both in discontinuous and continuous treatments, which will allow the simulation of the process through computer tools and facilitate its scaling., La valorización de residuos producidos en diversas actividades y que permita su retorno al sistema productivo dentro del objetivo de residuos cero y como una de las máximas de la economía circular permite una mejora de la sostenibilidad tanto económica como medioambiental. Dichos residuos, tanto orgánicos como inorgánicos, pueden ser empleados para su aplicación en procesos de remediación ambiental. La presencia de contaminantes emergentes en ambientes acuáticos representa una significativa problemática dados los efectos perniciosos que estos generan en los seres vivos y su eliminación focaliza nuevas investigaciones para su eliminación con diversas tecnologías como es la adsorción y donde se requiere la obtención de nuevos adsorbentes más eficaces. En el presente proyecto de Tesis se pretenden desarrollar nuevos biomateriales para el tratamiento de ambientes acuáticos contaminados con contaminantes emergentes de naturaleza diversa. Para ello, se propone, por una parte, evaluar una mezcla de diferentes biomateriales adsorbentes (tales como residuos agroindustriales) así como la producción de diferentes materiales carbonosos obtenidos mediante diversos pretratamientos seguidos de tratamientos térmicos, que se optimizarán, de estos residuos. Los nuevos adsorbentes se caracterizarán y se investigará la eliminación de compuestos representativos de contaminación en efluentes contaminados tanto a nivel individual como combinados apoyándose en herramientas como el diseño de experimentos. Se determinará la benignidad de las estrategias de remediación propuestas mediante análisis de toxicidad. Se optimizarán las condiciones de operación y se estudiará el sistema a escala laboratorio tanto en tratamientos en discontinuo como en continuo, lo que permitirá la simulación del proceso mediante herramientas informáticas y facilitará su escalado., A recuperación de residuos producidos en diversas actividades e permitir o seu regreso ao sistema produtivo dentro da meta de cero residuos como unha economía circular superior permite unha mellora tanto na sustentabilidade económica e ambiental. Estes residuos, tanto orgánicos como inorgánicos, pódense utilizar para a súa aplicación nos procesos de remediación ambiental. A presenza de contaminantes emerxentes en ambientes acuáticos representa un problema significativo, dado os efectos destrutivos que xeran nos organismos vivos ea súa eliminación céntrase máis investigacións para eliminación con varias tecnoloxías, como a adsorção e onde a obtención de novos adsorbentes máis eficaz require . No presente proxecto de tese pretende desenvolver novos biomateriais para o tratamento de contaminados con contaminantes de varias naturezas ambientes acuáticos emerxente. Para estes efectos, propón-se, por unha banda, para avaliar unha mestura de diferentes biomateriais adsorbentes (tales como residuos agro-industriais) ea produción de diferentes materiais carbonáceos obtidos por varios pre-tratamentos seguido tratamentos de calor a ser optimizado, destes residuos. Novos adsorbentes caracterizado e retirada de compostos representativos de contaminación contaminado tanto individualmente e efluentes combinados foron investigadas como ferramentas baseándose na concepción de experiencias. A benignidade das estratexias de remediación propostas determinaranse mediante a análise de toxicidade. as condicións de funcionamento foron optimizados eo sistema será estudada en ambos escala tratamento de lote e de laboratorio continuo, permitindo que a simulación do proceso utilizando ferramentas e facilitar o seu dimensionamento., Agencia Estatal de Investigación | Ref. CTM 2017-87326-R, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED431C 2021-43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Towards a more realistic heterogeneous electro-Fenton

  • Poza Nogueiras, Verónica
  • Moratalla, Ángela
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Sáez, Cristina
  • Rodrigo, Manuel Andrés
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, With the aim of bringing the heterogeneous electro-Fenton (EF) treatment one step closer to a more realistic operation, the scaling-up of that technology was evaluated. Assays were performed firstly at lab scale in a stirred-tank reactor and then at bench scale in a flow setup including a jet aerator and a microfluidic flow-through electrochemical cell. A fluidized-bed reactor was added to the bench-scale installation in order to retain the solid catalyst, iron-containing alginate beads. To the best of the authors’ knowledge, there are no precedent studies reporting a heterogeneous EF treatment in a similar bench scale-configuration. Hydrogen peroxide generation and clofibric acid removal were assessed at both scales at current intensities of 0.12 and 0.25 A. Results showed that the scaled-up treatment was more efficient and cost-effective: at bench scale 18 times more volume was treated, the mass production of hydrogen peroxide was 28 higher and the specific cost for the removal of clofibric acid was cut by more than half. The most efficient treatment turned out to be the EF performed at 0.12 A at bench scale. Those results highlighted the importance of the reactor design in the scaling-up process. Additionally, aromatic intermediates were detected by liquid chromatography-mass spectrometry (LC-MS) and a degradation route was suggested. Carboxylic acids were also measured by HPLC confirming that the pollutant is mineralizing., Ministerio de Educación, Cultura y Deporte I Ref. FPU16/02644, Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Agencia Estatal de Investigación | Ref. PID2019-110904RB-I00, Ministerio de Ciencia, Innovación y Universidades | Ref. CTQ2017-90659-REDT
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

ZnFe2O4-chitosan magnetic beads for the removal of chlordimeform by photo-Fenton process under UVC irradiation

  • Rezgui, Soumaya
  • Díez Sarabia, Aida Maria
  • Monser, Lotfi
  • Adhoum, Nafaa
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
A simple protocol was proposed for the preparation of magnetic chitosan beads ZnFe2O4-CS via a co-precipitation method. The use of synthesized magnetic ZnFe2O4-CS beads as catalyst for the heterogeneous photo-Fenton treatment of chlordimeform insecticide (CDM) was evaluated. The photo-Fenton experiments were carried out with different synthesized catalysts by varying the molar ratio Zn/Fe in chitosan beads, the catalyst concentration and pH. Under optimal conditions using 1 g of ZnFe2O4-CS beads with a molar ratio Zn/Fe = 0.35 and at pHinitial = 3, a real wastewater doped with 20 mg L−1 of CDM was treated and complete removal of the insecticide was achieved after 7 min with a total TOC removal after 2 h of treatment. The generated carboxylic acids and ions during the photo-Fenton process were identified and quantified. The stability of the photocatalytic activity of the best catalyst in terms of pollutant removal, ZnFe2O4-CS(0.35) beads with a molar ratio Zn/Fe equal to 0.35, was satisfactory validated by four consecutive cycles. This optimal catalyst was characterized, before and after use, by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy, X-Ray Powder Diffraction and Vibrating Sample Magnetometry analysis., Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED481B 2019/091, University of Kairouan (Tunisia) | Ref. UR16ES02, Agencia Estatal de Investigación | Ref. CTM2017-87326-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Double benefit of electrochemical techniques: treatment and electroanalysis for remediation of water polluted with organic compounds

  • Poza Nogueiras, Verónica
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
Concern about the current pollution of water environments and the inefficacy of conventional water treatments for the elimination of refractory contaminants has placed electrochemistry in the spotlight. With the objective of demonstrating the diverse applications that electrochemical techniques can have in the area of water remediation, this study is focused on the use of three different methods: (i) electro-Fenton process with heterogeneous catalyst as the treatment for the degradation of the target compounds; (ii) cyclic voltammetry for the characterization of the electrochemical system, and (iii) differential pulse voltammetry for the monitoring of the evolution of the degradation process. Four organic compounds were selected as target pollutants: the ionic liquid 1,3-Bis(2,4,6-trimethylphenyl)imidazolinium chloride, Mesitol, Mesidine and 2,5-Xylidine. Results were corroborated and complemented with chromatographic and total organic carbon (TOC) measurements. After 420 min of heterogeneous electro-Fenton treatment, almost 80% of TOC abatement was achieved for the ionic liquid and more than 90% for Mesitol, Mesidine and 2,5-Xylidine. Cyclic voltammetry studies for Mesitol and Mesidine suggested the formation of a polymeric film which remains adsorbed on the electrode surface. Finally, it was possible to conclude that the coupling of differential pulse voltammetry with the heterogeneous electro-Fenton process provides useful information about the evolution of the degradation process of pollutants in just a couple of minutes., Xunta de Galicia | Ref. ED431C 2017/47, Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/02644
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Eco-approach for pharmaceutical removal: thermochemical waste valorisation, biochar adsorption and electro-assisted regeneration

  • Escudero Curiel, Silvia
  • Acevedo Garcia, Valeria
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, In the present research, an eco-approach for the removal of pharmaceuticals from aqueous environment was developed under de principles of circular economy. Therefore, an eco-friendly adsorbent, biochar, was synthesized by the thermochemical valorisation of rice production waste. The rice bran was pyrolyzed at different temperatures (300–750°C) and a thermal post-treatment was evaluated with the aim to investigate its impact on characteristics and chemical composition of biochars. The obtained biochars were assayed for the removal of a model target pollutant, fluoxetine (FLX), and the biochar adsorption process was characterized in detail. The biochar obtained after the pyrolysis process at 500°C and autoclave post-treatment (BC500A) achieved the highest pollutant removal (92.6%). The pseudo-2nd order kinetic and Freundlich isotherm described well the process, and the primary adsorption mechanism was explained by electrostatic attractions. After that, the regeneration of this eco-friendly adsorbent was evaluated by an innovative electro-Fenton-like process using peroxymonosulfate (PMS) as oxidant agent. To our knowledge, this is the first attempt to regenerate biochar using this combined technology. The optimization of operational variables such as current intensity, PMS/FLX ratio, electrode material, and addition of enhancing agents (Fe and citric acid) were evaluated. The regeneration of spent biochar was effectively accomplished under the optimal conditions (150 mA, 75/1 PMS/FLX, and 0.15 mM citric acid). No external addition of Fe was necessary because the metal content on biochar was enough for the reaction to take place. Finally, 5 cycles of adsorption-regeneration were performed demonstrating the viability of the developed system. Accordingly, the proposed approach fits with the principles of circular economy, because the global removal of pollutant and valorisation of wastes were achieved., Agencia Española de Investigación | Ref. CTM2017-87326-R, Xunta de Galicia | Ref. ED431C 2017/47