Skip to main content

TECNOLOGIAS ELECTROQUIMICAS ANTE EL RETO DEL TRATAMIENTO DE ORINAS HOSPITALARIAS

PID2019-110904RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Exploring the pressurized heterogeneous electro-Fenton process and modelling the system

  • Poza Nogueiras, Verónica
  • Moratalla, Ángela
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Sáez, Cristina
  • Rodrigo, Manuel A.
In this research, a bench-scale installation was tested for the heterogeneous electro-Fenton treatment of clofibric acid. The setup consists of a pressurized flow-through electrochemical cell equipped with a catalyst fluidized-bed and aerated with a jet mixer. The novelty of the research is two-fold: the use of the pressurized-jet aerator on an electro-Fenton treatment is tested and it is one of the first studies combining pressure with heterogeneous catalysis in electro-Fenton. Moderate relative pressures, up to 2 bar, were analyzed. Initially, the electrogeneration of hydrogen peroxide was tested, showing that it is remarkably boosted by the application of pressure. Then, the elimination of clofibric acid by means of an electro-Fenton treatment was carried out at 0.12 and 0.25 A, using iron-containing alginate beads as the catalyst. Regardless of the current intensity, the increase from atmospheric pressure to 1 gauge bar boosted the elimination of the pollutant and reduced the specific energy consumption of the electrochemical cell. Specifically, at 0.25 A an abatement higher than 98% was achieved in 8 h at atmospheric pressure while only 1 h was required at 1 bar of gauge pressure. However, a further increase of the pressure to 2 bar did not report a major improvement. Moreover, the effect of pressure on the catalyst was analyzed, concluding that the integrity of the alginate beads was not compromised by pressure. In fact, the iron leaching was very similar at 0, 1 and 2 bar: around 30% after 8 h of treatment. Finally, a mathematical model was developed, using the experimental data to obtain the necessary fitting parameters, which allowed to understand better the behavior of the bench-scale reaction system., Ministerio de Ciencia, Innovación y Universidades | Ref. CTQ2017-90659-REDT, Junta de Comunidades de Castilla-La Mancha | Ref. SBPLY/17/180501/000396, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/02644, Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Agencia Estatal de Investigación | Ref. PID2019-110904RB-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Towards a more realistic heterogeneous electro-Fenton

  • Poza Nogueiras, Verónica
  • Moratalla, Ángela
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Sáez, Cristina
  • Rodrigo, Manuel Andrés
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, With the aim of bringing the heterogeneous electro-Fenton (EF) treatment one step closer to a more realistic operation, the scaling-up of that technology was evaluated. Assays were performed firstly at lab scale in a stirred-tank reactor and then at bench scale in a flow setup including a jet aerator and a microfluidic flow-through electrochemical cell. A fluidized-bed reactor was added to the bench-scale installation in order to retain the solid catalyst, iron-containing alginate beads. To the best of the authors’ knowledge, there are no precedent studies reporting a heterogeneous EF treatment in a similar bench scale-configuration. Hydrogen peroxide generation and clofibric acid removal were assessed at both scales at current intensities of 0.12 and 0.25 A. Results showed that the scaled-up treatment was more efficient and cost-effective: at bench scale 18 times more volume was treated, the mass production of hydrogen peroxide was 28 higher and the specific cost for the removal of clofibric acid was cut by more than half. The most efficient treatment turned out to be the EF performed at 0.12 A at bench scale. Those results highlighted the importance of the reactor design in the scaling-up process. Additionally, aromatic intermediates were detected by liquid chromatography-mass spectrometry (LC-MS) and a degradation route was suggested. Carboxylic acids were also measured by HPLC confirming that the pollutant is mineralizing., Ministerio de Educación, Cultura y Deporte I Ref. FPU16/02644, Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Agencia Estatal de Investigación | Ref. PID2019-110904RB-I00, Ministerio de Ciencia, Innovación y Universidades | Ref. CTQ2017-90659-REDT