Skip to main content

PROCESOS QUIMICOS AVANZADOS PARA LA CONVERSION DE RESIDUOS EN GAS NATURAL SINTETICO

RTI2018-095575-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental investigation on sorption enhanced gasification (SEG) of biomass in a fluidized bed reactor for producing a tailored syngas

  • Martínez Berges, Isabel
  • Kulakova, Viktoria
  • Grasa Adiego, Gemma
  • Murillo Villuendas, Ramón
6 Figuras.- 3 Tablas, Synthetic fuel production from renewable energy sources like biomass is gaining importance driven by the ambitious targets for reducing greenhouse gas emissions worldwide. Sorption enhanced gasification (SEG) proposes carrying out the gasification of biomass in the presence of a CO2 sorbent, which allows producing a syngas with a suitable composition for a subsequent synthetic fuel production step. This study aims at analysing the effect of different operating parameters (e.g. steam-to-carbon (S/C) ratio, CO2 sorption capacity and sorbent-to-biomass ratio) in the syngas composition and char conversion obtained in a 30 kWth bubbling fluidized bed gasifier, using grape seeds as feedstock. The importance of reducing the formation of higher hydrocarbons through a high steam-to-carbon ratio and using a CO2 sorbent with high sorption capacity is assessed. C3-C4 and unsaturated C2 hydrocarbons contents below 1%vol. (in dry and N2 free basis) can be achieved when working with S/C ratios of 1.5 at gasification temperatures from 700 to 740 °C. Varying the amount of the CO2 separated in the gasifier (by modifying the temperature or the CO2 sorption capacity of the sorbent) the content of H2, CO and CO2 in the syngas produced can be greatly modified, resulting in a module M = (H2-CO2)/(CO + CO2) that ranges from 1.2 to almost 3., This work has been carried out as part of the European Commission Horizon 2020 Framework Programme project FLEDGED (Grant agreement No. 727600) and the project WASYNG (No. RTI2018-095575-B-I00) funded by the Spanish Ministry of Science, Innovation and Universities. Authors thank also the Regional Aragon Government (DGA) for the economic support under the research groups' support programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailored syngas production from residual biomass gasification for the production of synthetic biofuels, Producción de gas de síntesis a partir de gasificación de biomasa de origen residual adecuado para la producción de biocombustibles sintéticos

  • Martínez Berges, Isabel
  • Grasa Adiego, Gemma
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • Murillo Villuendas, Ramón
6 Figuras.- 1 Tabla, [EN] Synthetic fuel production from renewable energy sources like biomass is gaining importance driven by the ambitious targets for reducing greenhouse gas emissions worldwide. Sorption enhanced gasification (SEG) proposes carrying out the gasification of biomass in the presence of a CO2sorbent, which allows producing a syngas with a suitable composition for a subsequent synthetic fuel production step. The Environmental Research Group of ICB-CSIC is involved in the assessment of this enhanced gasification process focused on residual biomass as a feedstock, analysing the influence of the main operating parameters (i.e. temperature, steam excess, residence time, ...) in the different products obtained (gas, solids and tar). This work has been initiated in the framework of the EU H2020 Programme project FLEDGED [1] and it is going to be continued throughout the recently assigned WASYNG project, funded by the Spanish Ministry of Science, Innovation and Universities. In this work, some of the results obtained for one of the feedstocks studied are presented., [ES] La producción de biocombustibles sintéticos a partir de energías renovables como la biomasa constituye una de las principales soluciones para conseguir reducir de forma notable las emisiones de gases de efecto invernadero a nivel mundial. En concreto, la gasificación indirecta de biomasa con vapor en presencia de un sorbente de CO2 permite producir un gas de síntesis con la composición adecuada para un proceso posterior de síntesis de un biocombustible. El grupo de Investigaciones Medioambientales del ICB-CSIC se encuentra investigando este proceso de gasificación aplicado a biomasas de origen residual, estudiando la influencia de las principales variables de operación (tales como la temperatura, exceso de vapor, tiempo de residencia...) en los principales productos del proceso (gas, sólidos y alquitranes). Esta investigación ha comenzado en el marco del proyecto Europeo FLEDGED del programa H2020 [1] y continuará en el marco del recién asignado proyecto WASYING, financiado por el Ministerio de Ciencia, Innovación y Universidades. En este trabajo se muestran algunos de los resultados obtenidos para una de las biomasas analizadas hasta el momento., This work has been carried out as part of the European Commission Horizon 2020 Framework Programme project FLEDGED (Grant agreement No. 727600) and the project WASYNG (No. RTI2018-095575-B-I00) funded by the Spanish Ministry of Science, Innovation and Universities. Authors thank also the Regional Aragon Government (DGA) for the economic support under the research groups’ support program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CO2 gasification of char derived from waste tire pyrolysis: Kinetic models comparison

  • Betancur, Mariluz
  • Arenas, Cindy Natalia
  • Martínez Ángel, Juan Daniel
  • Navarro López, María Victoria
  • Murillo Villuendas, Ramón
7 Figures, 6 tables.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work studies the gasification of char derived from waste tire pyrolysis (pCB) by using a thermogravimetric analyzer under CO2/N2 atmospheres (20/80, 25/85 and 30/70 vol%) at different temperatures (825 °C, 850 °C, 875 °C, 900 °C and 925 °C). The main goal is the assessment of three different kinetic models for predicting not only the conversion (X) versus time (t) curve, but also the reaction rate (dX/dt) versus conversion (X) one, with high accuracy. At this respect, the Changing Grain Size Model (CGSM), the Random Pore Model (RPM) and a new model based on the RPM named the Hybrid Modified Random Pore Model (HMRPM) were used. The three models were fitted and the kinetic parameters such as the apparent kinetic constant (Ki(T,pj)), the reaction order (n), the activation energy (Ea) and the pre-exponential factor (A) were determined. The results suggest that the HMRPM is the model with better fitting because its ability to reproduce both conversion (X) and reaction rate (dX/dt); and hence, it is reliable to be integrated in both particle and reactor models, i.e. when the process is being designed and scaled-up. A drastically decrease in the reaction rate at the first stage of conversion (<20%) suggests a possible effect of volatile matter and inorganic compounds contained into the pCB. The n, Ea and A were found to be 0.543, 147.27 kJ/mol and 4.547 × 105 s−1, respectively., This work has been carried out as part of the project WASYNG (No. RTI2018-095575-BI00) funded by the Spanish Ministry of Science, Innovation and Universities and the Regional Aragon Government (DGA) for the economic support under the research groups' support program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimised production of tailored syngas from municipal solid waste (MSW) by sorption-enhanced gasification

  • Martínez Berges, Isabel
  • Grasa Adiego, Gemma
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • Murillo Villuendas, Ramón
8 figures, 5 tables, Sorption-enhanced gasification (SEG) is a promising indirect gasification route for the production of synthetic fuels since it allows the H2, CO and CO2 content of the resulting syngas to be adjusted. This SEG process has been successfully demonstrated at pilot scale for lignocellulosic biomass and other agricultural and forest waste products, mainly focusing on H2-rich gas production. Within this work, the potential application of the SEG process to a material derived from municipal solid waste (MSW) as feedstock is experimentally demonstrated in a 30 kWth bubbling fluidised-bed (BFB) gasifier. The influence of the sorbent-to-biomass ratio, steam excess and gasification temperature has been carefully analysed in order to understand their effect on SEG performance. Moreover, main conditions able to affect the resulting syngas composition, specifically in terms of H2, CO and CO2 content, have been indicated. Gasification temperature turned out to be the variable that most influenced syngas composition due to the limiting mechanisms associated with the carbonation of the CaO used as bed material. This operating variable also determined biomass conversion, together with solids residence time in the gasifier, resulting in a wide variation of fixed carbon conversion under the studied conditions. Finally, tar yield and composition were evaluated as a function of temperature and the sorbent-to-biomass ratio used, resulting in tar contents as low as 7 g/Nm3 (dry gas), consisting mainly of 1-ring aromatic compounds., This work has been supported by the European Commission (FLEDGED project, grant agreement No. 727600); the Spanish Ministry of Science and Innovation, the State Research Agency and the European Founds for Regional Development (No. RTI2018-095575-B-I00, MCI/AEI/FEDER, UE); and the Regional Aragon Government (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of process operating conditions in the sorption-enhanced gasification of the organic fraction of municipal solid waste (Msw)

  • Ordóñez Millán, Carlos
  • Martínez Berges, Isabel
  • Grasa Adiego, Gemma
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • Murillo Villuendas, Ramón
9 figures, 1 table.-- Talk delivered at the 29th European Biomass Conference and Exhibition, EUBCE 2021, Virtual, Online, 26 April 2021 - 29 April 2021., The effect of main operational conditions for the Sorption Enhanced Gasification procees (SEG) on gas quality and tars has been evaluated in a 30 kW bubbling fluidized bed reactor using the organic fraction of municipal solid waste (MSW) as feedstock. The process has been proved to be flexible, and gasification temperature appears to be the variable that mostly affected the M-module in the syn-gas produced and also the presence of light hydrocarbons and tar yield. The steam-to-biomass (S/C) ratio does not influence the permanent gas composition (i.e. the M-module), but affects the content of light hydrocarbons in the syngas as well as tar yield. The sorbent-to- biomass (CaO/C) ratio influences mainly the C3-C4 hydrocarbons content and the tar yield (due to the catalytic effect of CaO towards tar cracking)., This work has been supported by the European Commission (FLEDGED project, grant agreement No. 727600); the Spanish Ministry of Science and Innovation, the State Research Agency and the European Founds for Regional Development (No. RTI2018-095575-B-I00, MCI/AEI/FEDER, UE); and the Regional Aragon Government (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sorption-enhanced gasification (SEG) of agroforestry residues: Influence of feedstock and main operating variables on product gas quality

  • Martínez Berges, Isabel
  • Callén Romero, M. Soledad
  • Grasa Adiego, Gemma
  • López Sebastián, José Manuel
  • Murillo Villuendas, Ramón
8 figures, 5 tables., Sorption-enhanced gasification (SEG) is a promising route for the conversion of biomass into synthetic fuels. There are important aspects regarding syngas quality (e.g. tar composition and/or gaseous contaminants such as H2S) that may influence the scaling-up of the process and should be assessed. Experiments were performed in a 30 kWth bubbling fluidised gasifier to evaluate the effect of the feedstock used, temperature, sorbent-to-biomass (S/B) ratio and/or steam excess on such quality aspects. Larger amounts of tars were found for straw, which corresponded to highly stable tars (benzene, toluene, naphthalene and phenanthrene). Temperature, S/B ratio and steam excess favoured tar decomposition, causing the contribution of PAHs to total tar to increase. PAHs and phenol contents were found to be related to and dependant on the temperature and S/B ratio. Elutriated CaO particles reacted with the H2S formed until equilibrium conditions were reached, leading to syngas H2S contents of between 15 and 85 ppm. Sulphur in the syngas represented no more than 15% of the total sulphur introduced into the reactor, whereas 65–85% ended up as CaS with the partially converted sorbent particles leaving the reactor., Authors acknowledge the financial support given by the Spanish Ministry of Science and Innovation, the State Research Agency and the European Funds for Regional Development (No. RTI2018-095575-B-I00, MCI/AEI/FEDER, UE), as well as the Regional Aragon Government (DGA) under the research groups' support programme and the research project LMP178_18. Isabel Martínez thanks also the Spanish Ministry of Science and Innovation for her Ramón y Cajal contract (RYC2019-026929-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sorption-enhanced CO and CO2 methanation (SEM) for the production of high purity methane

  • Gómez Alonso, Laura
  • Martínez Berges, Isabel
  • Navarro López, María Victoria
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
14 figures, 4 tables., Sorption-enhanced methanation (SEM) is one of the solutions proposed for the production of high quality synthetic natural gas (SNG) under mild conditions of temperature and pressure. In this novel process, the methanation reaction is performed in the presence of an adsorbent that retains the water produced as by-product. The SEM potential of a Rh-based catalyst and a zeolite 5A adsorbent has been demonstrated for both CO and CO2 hydrogenation. Pure CH4 production was possible operating at 275 °C and atmospheric pressure under sorption-enhanced CO2 methanation conditions for space velocities of up to 514 mlCO2/gcat/h. For sorption-enhanced CO methanation, CH4 purities of 86 vol% were achieved under the same operating conditions but at lower space velocity (440 mlCO/gcat/h). Finally, SEM/regeneration cycles were performed for a feed gas containing CO and CO2, achieving stable performance throughout the cycles and a constant CH4 purity of about 60 vol% for the operating conditions chosen., Authors acknowledge the project RTI2018-095575-B-I00 funded by MCIN/AEI/10.13039/501100011033/ and "ERDF A way of making Europe" and the Regional Government of Aragon (DGA) under the research groups support programme. Laura Gómez also thanks the DGA for her pre-doctoral fellowship. Isabel Martínez thanks the grant RYC2019-026929-I funded by MCIN/AEI/10.13039/501100011033 and "ESF Investing in your future"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Principal component analysis and partial least square regression models to understand sorption-enhanced biomass gasification

  • Callén Romero, M. Soledad
  • Martínez Berges, Isabel
  • Grasa Adiego, Gemma
  • López Sebastián, José Manuel
  • Murillo Villuendas, Ramón
5 figures, 5 tables.-- Supplementary information available., Gasification represents a potential technology for the conversion of biomass into usable energy. The influence of the main gasification parameters, i.e. the type of biomass used and its composition, as well as the composition of the outlet gas, were studied by a multivariate statistical analysis based on principal component analysis (PCA) and partial least square (PLS) regression models in order to identify the main correlations between them and to the contents of methane, ethylene and tar in the outlet gas. In this work, the experimental data used as input for the multivariate statistical analysis came from a TRL-4 gasification plant running under sorption enhanced conditions, i.e. using steam as the gasifying agent and CaO as the bed material. The composition of the biomass feed played an important role in the quality of the outlet gas composition. In fact, biomasses with high ash and sulphur contents (municipal solid waste) increased ethylene content, while those with high-volatile matter content and fixed C content (wood pellets, straw pellets and grape seeds) mainly increased CO and CO2 formation. By increasing the gasification bed temperature and the CaO/C ratio, it was possible to reduce the methane and the collected tar contents in the outlet gas. Other light hydrocarbons could also be reduced by controlling the Treactor and TFB. Methane, ethylene and tar contents were modelled, cross-validated and tested with a new set of samples by PLS obtaining results with an average overall error between 8 and 26%. The statistically significant variables to predict methane and ethylene content were positively associated to the thermal input and negatively to the CaO/C ratio. The biomass composition was also remarkable for both variables, as mentioned in the PCA analysis. As far as the tar content, which is undesirable in all gasification processes, the decrease in the tar content was favoured by high bed temperature, low thermal input and biomass with high-volatile matter content. In order to produce an outlet gas with adequate quality (e.g. low tar content), a compromise should be found to balance average bed temperature, sorbent-to-mass ratio, and ultimate and proximate analyses of the biomass feed., This work was supported by the Spanish Ministry of Science and Innovation, the State Research Agency and the European Funds for Regional Development (No. RTI2018-095575-B-I00, MCI/AEI/FEDER, UE) and the Regional Aragon Government (DGA) under the research groups’ support programme and the research project LMP178_18. I. Martínez thanks the grant RYC2019-026929-I funded by MCIN/AEI/10.13039/501100011033 and EI FSE Invierte en tu futuro., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Performance study of a methanation process for a syngas obtained from a sorption enhanced gasification process

  • Gómez Alonso, Laura
  • Grasa Adiego, Gemma
  • Martínez Berges, Isabel
  • Murillo Villuendas, Ramón
7 figures, 6 tables., Synthetic Natural Gas (SNG) produced from renewable sources constitutes a solution for the transition to net-zero emissions for natural gas relying sectors. From the different biomass-to-SNG routes, the gasification of biomass to produce a syngas that is further converted into SNG has a large potential in a near future. In this work, the methanation process under quasi commercial conditions was demonstrated for a syngas generated from biomass gasification. The influence of process variables like pressure, steam/CO ratio and syngas composition (i.e. content of CO2, CH4 and light hydrocarbons) were analyzed to evaluate the maximum CH4 purity achieved in a commonly used two-step methanation process. Moreover, the need of adding green H2 produced from renewable sources was studied to adjust the H2/CO/CO2 ratio for methanation. A product gas with 78 %vol. CH4 was produced using a commercial Ni-based catalyst, being the conversion of CO2 the limiting factor towards the fulfilment of a higher CH4 content (only 37 % of CO2 conversion was reached in the second methanation reactor at 270 °C, 4 bar and 2140 h−1 of gas space velocity). Alternative operating conditions and/or intensified process schemes stand as the most promising alternatives for the conversion of syngas into high purity SNG., Authors thank the project RTI2018-095575-BI00 funded by MCIN/AEI/10.13039/501100011033/ and “ERDF A way of making Europe” and Diputación General de Aragón (DGA) through the project INV01 B2 of the R + D projects focused on the RIS3 priority lines (2018-2020 projects). Laura Gómez also acknowledges DGA for the pre-doctoral fellowship. Isabel Martínez thanks the grant RYC2019-026929-I funded by MCIN/AEI/10.13039/501100011033 and EI “ESF Investing in your future.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pyrolysis of tea and coffee wastes: effect of physicochemical properties on kinetic and thermodynamic characteristics

  • Ben Abdallah, Asma
  • Ben Hassen Trabelsi, Aïda
  • Navarro López, María Victoria
  • Veses Roda, Alberto
  • García Martínez, Tomás
  • Mihoubi, Daoued
8 figures.-- Supplementary information available., Physicochemical properties, kinetic pyrolysis and thermodynamic study of spent green tea, pure spent coffee grounds, spent coffee grounds blended with 50% torrefied barley and coffee husk were experimentally investigated using thermogravimetric analysis under an inert atmosphere to evaluate their thermochemical application. Five isoconversional methods were applied to determine effective activation energy (Ea) of the pyrolysis processes. All methods showed good agreement by determining fluctuating Ea values (150–500 kJ mol−1). Complex Ea profiles with conversion were divided into four stages corresponding to thermal degradation of main biomass constituents (extractives, hemicellulose, cellulose and lignin), indicating that extractives decomposition was the least demanding reaction while lignin decomposition was the most demanding. The kinetic process was verified by reconstruction according to the Friedman parameters. The thermodynamic parameters were evaluated to determine the energy demand and efficiency throughout the process. The values obtained for physicochemical properties such as volatile matter (> 68%) and higher heating value (> 17 MJ kg−1), average Ea (223–319 kJ mol−1) and significant energy efficiency implied that these types of biomass waste have significant reactivity and consequently the highest potential for the production of bioenergy and a range of high-value chemicals and materials., This work was supported and funded by the Ministry of Higher Education and Scientific Research (MESRST) in Tunisia through the Project “Thermochemical and biochemical conversion of solid waste” under a Contract between the MESRST and the Research and Technology Centre of Energy (Program contract 2019-2022). The financial support for this work also was given by the Spanish Ministry of Science and Innovation, the State Research Agency and the European Funds for Regional Development (No. RTI2018-095575-B-I00, MCI/AEI/FEDER, UE), as well as the Regional Government of Aragon (DGA) under the research groups support programme. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gasification kinetics of chars from diverse residues under suitable conditions for the Sorption Enhanced Gasification process

  • Grasa Adiego, Gemma
  • Martínez Berges, Isabel
  • Murillo Villuendas, Ramón
5 figures, 5 tables., Gasification kinetics for six chars from residual origin have been determined in a relatively low temperature range, low CO2 and high H2O partial pressures, typical from Sorption Enhanced Gasification (SEG) processes. In general, models based on the Random Pore Model (RPM) are the best fitting experimental results, but ash composition (in terms of alkali and alkaline earth metals) was crucial for the selection of the reaction model to be applied. Char conversion from biogenic waste with ash content higher than 30 % wt. was modelled with RPM model, but reaction rate for chars with the highest K/Si ratio was better described with modified versions of the RPM capable of predicting maximum reaction rates at high char conversion. For chars with similar ash content and composition, textural properties determined the pre-exponential factor and the activation energy for the gasification reaction (with both CO2 and H2O), while identical fitting parameters for the semi-empirical model were capable of predicting char conversion with time., This work was supported by the Spanish Ministry of Science and Innovation, the State Research Agency and the European Funds for Regional Development (No. RTI2018-095575-B-I00, MCI/AEI/FEDER, UE). The authors also acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness (PTI + TransEner TRE2021-03-005) and from the Spanish Ministry of Science and Innovation (TED2021-131768B–I00, no:236027). Isabel Martínez thanks the grant RYC2019-026929-I funded by MCIN/AEI/10.13039/501100011033 and AEI “ESF Investing in your future”., Peer reviewed