Skip to main content

DETECTORES DE RAYOS-X BASADOS EN TES: OPTIMIZACION DEL PIXEL Y DESARROLLO DE ARRAYS

RTI2018-096686-B-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

AC/DC characterization of a Ti/Au TES with Au/Bi absorber for x-ray detection

  • Taralli, Emanuele
  • Pobes, Carlos
  • Khosropanah, Pourya
  • Fàbrega, Lourdes
  • Camón, Agustín
  • Gottardi, Luciano
  • Nagayoshi, Kenichiro
  • Ridder, M.
  • Bruijn, Marcel
  • Gao, J. R.
Transition-edge sensors (TESs) are used as very sensitive thermometers in microcalorimeters aimed at detection of different wavelengths. In particular, for soft X-ray astrophysics, science goals require very high-resolution microcalorimeters which can be achieved with TESs coupled to suitable absorbers. For many applications, there is also need for a high number of pixels which typically requires multiplexing in the readout stage. Frequency-domain multiplexing (FDM) is a common scheme and is the baseline proposed for the ATHENA mission. FDM requires biasing the TES in AC at MHz frequencies. Recently, there has been reported degradation in performances under AC with respect to DC bias. In order to assess the performances of TESs to be used with FDM, it is thus of great interest to compare the performances of the same device both under AC bias and DC bias. This requires two different measurement set-ups with different processes for making the characterization. We report in this work the preliminary results of a single-pixel characterization performed on a TiAu TES under AC and afterwards under DC bias in different facilities. Extraction of dynamical parameters and noise performances are compared in both cases as a first stage for further AC/DC comparison of these devices., This work is partly funded by European Space Agency (ESA) and coordinated with other European efforts under ESA CTP contract ITT AO/1-7947/14/NL/BW. It has also received funding from the European Union’s Horizon 2020 Programme under the AHEAD (Activities for the High-Energy Astrophysics Domain) project with grant agreement number 654215. CSIC work is financed by the Spanish Ministerio de Ciencia, Innovación y Universidades-MICINN (projects ESP2016-76683-C3-2-R and RTI2018-096686-B-C22). Personnel from ICMAB acknowledge financial support from MINECO, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Temperature and current sensitivities of bare Mo/Au transition-edge sensors

  • Fàbrega, Lourdes
  • Camón, Agustín
  • Štrichovanec, Pavel
  • Pobes, Carlos
  • Bolea, Juan
  • Mas Martin, Manel
We study the logarithmic transition sensitivities to temperature and current, α and β, of bare Mo/Au TES sensors without any normal metal structure, with and without relevant weak link effects. Both parameters display a smooth dependence with bias. We analyze them as a function of bias, bath temperature and TES size. We observe relevant differences in the behavior of α and β as the aspect ratio increases., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Financial support from the Spanish Ministerio de Ciencia e Innovación MICINN, through Project RTI2018-096686-B-C22 and FPI contract (MM), is acknowledged. Personnel from ICMAB acknowledge also MICINN for support through the Severo Ochoa Program for Centers of Excellence (Project FUNFUTURE, CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Neural network assisted design of plasmonic nanostructures on superconducting transition-edge-sensors for single photon detectors

  • Rodrigo, Sergio G.
  • Pobes, Carlos
  • Sánchez Casi, Marta
  • Martín-Moreno, Luis
  • Camón, Agustín
Transition edge sensors (TESs) are extremely sensitive thermometers made of superconducting materials operating at their transition temperature, where small variations in temperature give rise to a measurable increase in electrical resistance. Coupled to suitable absorbers, they are used as radiation detectors with very good energy resolution in several experiments. Particularly interesting are the applications that TESs may bring to single photon detection in the visible and infrared regimes. In this work, we propose a method to enhance absorption efficiency at these wavelengths. The operation principle exploits the generation of highly absorbing plasmons on the metallic surface. Following this approach, we report nanostructures featuring theoretical values of absorption reaching 98%, at the telecom design frequency (λ = 1550 nm). The optimization process takes into account the TES requirements in terms of heat capacity, critical temperature and energy resolution leading to a promising design for an operating device. Neural networks were first trained and then used as solvers of the optical properties of the nanostructures. The neural network topology takes the geometrical parameters, the properties of materials and the wavelength of light as input, predicting the absorption spectrum at single wavelength as output. The incorporation of the material properties and the dependence with frequency was crucial to reduce the number of required spectra for training. The results are almost indistinguishable from those calculated with a commonly used numerical method in computational electromagnetism, the finite-difference time-domain algorithm, but up to 106 times faster than the numerical simulation., Ministerio de Ciencia, Innovación y Universidades (MAT2017-88358-C3 (MCIN/AEI/10.13039/501100011033/FEDER), PID2020-Q1115221GB-C41 (MCIN/AEI/10.13039/501100011033), RTI2018-096686-B-C22 (MCIN/AEI/10.13039/501100011033/FEDER))., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Temperature and Current Sensitivities of Bare Mo/Au Transition-Edge Sensors

  • Fàbrega, Lourdes
  • Camón, Agustín
  • Strichovanec, Pavel
  • Pobes, Carlos
  • Bolea, Juan
  • Mas, Manel
We study the logarithmic transition sensitivities to temperature and current, α and β, of bare Mo/Au TES sensors without any normal metal structure, with and without relevant weak link effects. Both parameters display a smooth dependence with bias. We analyze them as a function of bias, bath temperature and TES size. We observe relevant differences in the behavior of α and β as the aspect ratio increases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Neural network assisted design of plasmonic nanostructures on superconducting transition-edge-sensors for single photon detectors; 35472873

  • Gutiérrez Rodrigo, S.
  • Pobes Aranda, C.
  • Sánchez Casi, M.
  • Martín-Moreno, L.
  • Camón Lasheras, A.
Transition edge sensors (TESs) are extremely sensitive thermometers made of superconducting materials operating at their transition temperature, where small variations in temperature give rise to a measurable increase in electrical resistance. Coupled to suitable absorbers, they are used as radiation detectors with very good energy resolution in several experiments. Particularly interesting are the applications that TESs may bring to single photon detection in the visible and infrared regimes. In this work, we propose a method to enhance absorption efficiency at these wavelengths. The operation principle exploits the generation of highly absorbing plasmons on the metallic surface. Following this approach, we report nanostructures featuring theoretical values of absorption reaching 98%, at the telecom design frequency (¿ = 1550 nm). The optimization process takes into account the TES requirements in terms of heat capacity, critical temperature and energy resolution leading to a promising design for an operating device. Neural networks were first trained and then used as solvers of the optical properties of the nanostructures. The neural network topology takes the geometrical parameters, the properties of materials and the wavelength of light as input, predicting the absorption spectrum at single wavelength as output. The incorporation of the material properties and the dependence with frequency was crucial to reduce the number of required spectra for training. The results are almost indistinguishable from those calculated with a commonly used numerical method in computational electromagnetism, the finite-difference time-domain algorithm, but up to 106 times faster than the numerical simulation. © 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement Journal © 2022