Skip to main content

CUANTIFICACION Y MODELIZACION DEL TRANSPORTE DE RADON EN SUELOS. VALORACION DE SU RIESGO POTENCIAL Y USO COMO TRAZADOR GEOQUIMICO NATURAL

RTI2018-099052-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Temperature-Induced Explosive Behaviour and Thermo-Chemical Damage on Pyrite-Bearing Limestones: Causes and Mechanisms

  • Martínez Ibáñez, Víctor|||0000-0003-4445-2896
  • Hidalgo Signes, Carlos|||0000-0001-6354-4994
  • Garrido De La Torre, Mª Elvira|||0000-0001-7804-3922
  • Benavente, D.
  • Tomás, R.
[EN] In this investigation, two different varieties of 'Prada' limestones were studied: a dark grey texture, bearing quartz, clay minerals, organic matter and pyrites, and a light grey texture with little or no presence of such components. We have observed two effects of different intensity when heating the dark texture from 400 degrees C: (1) the explosion of certain samples and (2) greater thermal damage than in the light grey texture. Chemical and mineralogical composition, texture, microstructure, and physical properties (i.e. colour, open porosity, P and S-wave velocity) have been evaluated at temperatures of 105, 300, 400, and 500 degrees C in order to identify differences between textures. The violence of the explosive events was clear and cannot be confounded with ordinary splitting and cracking on thermally treated rocks: exploded samples underwent a total loss of integrity, displacing and overturning the surrounding samples, and embedding fragments in the walls of the furnace, whose impacts were clearly heard in the laboratory. Thermogravimetric results allowed the identification of a process of oxidation of pyrites releasing SO2 from 400 degrees C. This process jointly with the presence of microfissures in the dark texture, would cause a dramatic increase in pore pressure, leading to a rapid growth and coalescence of microcracks that leads to a process of catastrophic decay in rock integrity. In addition to the explosive events, average ultrasound velocities and open porosity showed a greater variation in the dark grey texture from 400 degrees C. That result also points towards a significant contribution of oxidation of pyrites on the thermo-chemical damage of the rock, among other factors such as the pre-existence of microfissures and the thermal expansion coefficient mismatch between minerals. Implications in underground infrastructure and mining engineering works are critical, as the explosive potential of pyrite-bearing limestones bears risk for mass fracturing and dramatic strength decay from 400 degrees C. Moreover, SO2 released has harmful effects on health of people and the potential to form acid compounds that corrode materials, shortening their durability and increasing maintenance costs., The authors wish to acknowledge Dr Julio Company Rodriguez from the Universitat Politecnica de Valencia and Professor Juan Carlos Canaveras from the University of Alicante, for their valuable help on mineralogical and petrographic description of the rock, respectively, in addition, Mr. Manuel Angel Morilla Rubio from the Universitat Politecnica de Valencia for his support on laboratory tests. Also Kreum SA, Ayesa SA, Infraestructures de la Generalitat de Catalunya, S.A.U., and the Lleida regional roads authority (Servei Territorial de Carreteres de Lleida, Generalitat de Catalunya) for providing rock samples. This work was supported by the Spanish Government [Grant number RTI2018-099052-B-I00] and by the Department of Geological and Geotechnical Engineering, Universitat Politecnica de Valencia.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insights on Climate-Driven Fluctuations of Cave 222Rn and CO2Concentrations Using Statistical and Wavelet Analyses

  • Pla, Concepción
  • Fernández-Cortés, Ángel
  • Cuezva, Soledad
  • Galiana-Merino, Juan Jose
  • Cañaveras, Juan Carlos
  • Sánchez-Moral, Sergio
  • Benavente, David
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited., Understanding the fluctuations in cave air concentrations and their climatic control is substantial not only to preserve the quality of indoor atmospheres but also to avoid the risk related to the presence of hazardous substances. In this study, we investigated the most influential factors affecting 222Rn and CO2 concentrations, the nature of their dynamics, and their coupling with climatic variations. For this purpose, we combined a set of mathematical methods that included a statistical and wavelet analysis of a 6-year time series in Rull Cave (Spain). Generally, the 222Rn and CO2 dynamic in cave air showed similar patterns. However, the obtained results show that these gases have a different frequency response. Thus, the annual component of 222Rn and CO2 is controlled by the relationship between external and internal temperatures. At low frequencies, both gases are affected by the same variables when the cave atmosphere reaches a minimum concentration. However, when the cave atmosphere is isolated from the outdoors, 222Rn and CO2 behave differently and disturbance caused by the visitors is evidenced in terms of the CO2 concentration; the latter observation was confirmed by the wavelet analysis at high frequencies. In contrast, the 222Rn concentration shows important variations following rainfall, which was weakly identified in the CO2 concentration., This research was funded by the Spanish Ministry of Science, Innovation and Universities (projects CGL2016-78318-C2-1-R, CGL2016-78318-C2-2-R, and RTI2018-099052-B-I00) and the University of Alicante (project GRE17-12).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparative analysis of water condensate porosity using mercuryintrusion porosimetry and nitrogen and water adsorption techniquesin porous building stones

  • Benavente, David
  • Such-Basañez, I.
  • Fernández-Cortés, Ángel
  • Pla, C.
  • Cazorla-Amorós, D.
  • Cañaveras, Juan Carlos
  • Sánchez-Moral, Sergio
Condensate porosity in porous materials has a significant influence on comfort, energy consumption, and material’s strength and durability. The variation of the moisture content of the material for a given variation of relative humidity describes the moisture storage capacity and has to be determined experimentally through the water sorption isotherm. However, the characterisation of sorption isotherm is very time-consuming, mostly for high relative humidity conditions, which may cause experimental errors and reproducibility problems., This paper aims to estimate experimental water condensate porosity using mercury intrusion porosimetry and nitrogen adsorption technique considering pores smaller than 0.1 μm for a wide range of porous sedimentary rock types with different petrographic characteristics. Particularly for nitrogen adsorption characterisation, we interpolated the pore volume using BJH method applied to the desorption branch. In the water adsorption test, condensate porosity is obtained with the maximum adsorbed water at RH = 100%., The ratio between water condensate porosity and total porosity in the studied porous stones is important and varies from 2 to 38%. Nitrogen adsorption technique provides the best estimation of condensate porosity (R2 = 0.979) and an effective estimation of water condensate porosity. The correlation between condensate porosity using MIP is moderate (R2 = 0.892) and presents a wider dispersion for all the range of condensate porosity. A mathematical expression that fits the shape and curvature of the water isotherm was also analysed in terms of pore structure. These studies are scarce for porous stones and our results provide valuable information for these widely used construction and building material., This work was supported by the Spanish Ministry of Science, Innovation and Universities [grant number RTI2018-099052-B-I00] and Regional Governments of Comunidad Valenciana (Spain) [grant number AICO/2020/175] and Madrid (Spain) [Top Heritage, grant number S2018/NMT-4372]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Global models for 222Rn and CO2 concentrations in the Cave of Altamira

  • Sáez, M.
  • Mangiarotti, S.
  • Cuezva, Soledad
  • Fernández-Cortés, Ángel
  • Molero, B.
  • Sánchez-Moral, Sergio
  • Benavente, David
The purpose of this paper is to model numerically the dynamics of CO and Rn in cave atmospheres, particularly in the noteworthy Cave of Altamira (Spain). We aim to get a better understanding of the nature of these dynamics and their couplings with climatic controls, more specifically the soil water content, which role in the said dynamics poses some questions. For the first time, we apply the global modeling technique in the field of cave microclimate and atmospheric composition. The global modeling technique is a methodology based on the theory of nonlinear systems and designed to extract mathematical models directly from observational time series. We were able to extract four global models from our data. These models represent a step forward from the existent conceptual ones. They also show that CO and Rn dynamics can be approximated by low-dimensional, deterministic systems, which can be chaotic or, at least, close to chaos; this has decisive methodological consequences for future research. Moreover, the global modeling technique was used for the first time in a non-autonomous formulation; this enabled the possibility of studying the influence of the external forcing (soil water content) on the gas concentration in different scenarios., This research was supported by the Spanish Government (grant numbers RTI2018-099052-B-I00 and PID2019-110603RB-I00) and the Regional Government of Comunidad Valenciana, Spain (grant number AICO/2020/175). SM received financial support from the French programs Les Enveloppes Fluides et l’Environnement (CNRS-INSU) and Programme National de Télédétection Spatiale (CNRS). A post-doctoral research fellowship was awarded to S. Cuezva by the University of Almería (Hipatia Programme). A research grant for a doctoral stay was awarded to M. Sáez by the University of Alicante., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of subterranean microbiota in the carbon cycle and greenhouse gas dynamics

  • Martín-Pozas, Tamara
  • Cuezva, Soledad
  • Fernández-Cortés, Ángel
  • Cañaveras, Juan Carlos
  • Benavente, David
  • Jurado, Valme
  • Sáiz-Jiménez, Cesáreo
  • Janssens, Ivan
  • Seijas, Naomí
  • Sánchez-Moral, Sergio
Subterranean ecosystems play an active role in the global carbon cycle, yet only a few studies using indirect methods have focused on the role of the cave microbiota in this critical cycle. Here we present pioneering research based on in situ real-time monitoring of CO2 and CH4 diffusive fluxes and concurrent δ13C geochemical tracing in caves, combined with 16S microbiome analysis. Our findings show that cave sediments are promoting continuous CH4 consumption from cave atmosphere, resulting in a significant removal of 65% to 90%. This research reveals the most effective taxa and metabolic pathways in consumption and uptake of greenhouse gases. Methanotrophic bacteria were the most effective group involved in CH4 consumption, namely within the families Methylomonaceae, Methylomirabilaceae and Methylacidiphilaceae. In addition, Crossiella and Nitrosococcaceae wb1-P19 could be one of the main responsible of CO2 uptake, which occurs via the Calvin-Benson-Bassham cycle and reversible hydration of CO2. Thus, syntrophic relationships exist between Crossiella and nitrifying bacteria that capture CO2, consume inorganic N produced by heterotrophic ammonification in the surface of sediments, and induce moonmilk formation. Moonmilk is found as the most evolved phase of the microbial processes in cave sediments that fixes CO2 as calcite and intensifies CH4 oxidation. From an ecological perspective, cave sediments act qualitatively as soils, providing fundamental ecosystem services (e.g. nutrient cycling and carbon sequestration) with direct influence on greenhouse gas emissions., This work was supported by the Spanish Ministry of Science, Innovation through project PID2019-110603RB-I00, MCIN/AEI/FEDER UE/10.13039/501100011033 and with collaboration of projects RTI2018-099052-B-I00 and PID2020-114978GB-I00. This research has also received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 844535 — MIFLUKE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Prokaryotic communities inhabiting a high-radon subterranean ecosystem (Castañar Cave, Spain): Environmental and substrate-driven controls

  • Martín-Pozas, Tamara
  • Cuezva, Soledad
  • Fernández-Cortés, Ángel
  • Benavente, David
  • Sáiz-Jiménez, Cesáreo
  • Sánchez Moral, Sergio
14 pagínas.- 7 figuras.- 88 referencias.- Supplementary data associated with this article can be found in the online version at doi:10.1016/j.micres.2023.127511, Castañar Cave (Caceres, Spain) is a unique show cave known for its high natural radiation levels. This study presents a comprehensive analysis of its prokaryotic diversity, specifically focusing on investigating the influence of environmental conditions and substrate characteristics on the prokaryotic community structure in the cave sediments. Additionally, the research aims to evaluate the potential impact of human activities on the cave ecosystem. The identification of distinct bioclimatic zones within the cave was made possible through a combination of environmental and microbial monitoring (ATP assays). The results reveal sediment texture as a significant factor, notably affecting the structure, diversity, and phylogenetic variability of the microbial community, including both Bacteria and Archaea. The proportion of clay minerals in sediments plays a crucial role in regulating moisture levels and nutrient availability. These substrate properties collectively exert a significant selective pressure on the structure of prokaryotic communities within cave sediments. The molecular approach shows that heterotrophic bacteria, including those with chitinolytic enzymes, primarily inhabit the cave. Furthermore, chemoautotrophic nitrifiers such as the archaea Nitrososphaeria and the genus Nitrospira, as well as methanotrophic bacteria from the phyla Methylomirabilota, Pseudomonadota, and Verrucomicrobiota, are also present. Remarkably, despite being a show cave, the cave microbiota displays minimal impacts from human activities and the surface ecosystem. Prokaryotic populations exhibit stability in the innermost areas, while the tourist trail area experiences slightly higher biomass increases due to visitor traffic. This suggests that conservation efforts have successfully limited the entry of external nutrients into the innermost cave areas. Additionally, the results suggest that integrating biomarkers like ATP into environmental monitoring can significantly enhance the methods used to study the negative impacts of tourism on cave ecosystems., This research was supported by the Spanish Ministry of Science and Innovation through project PID2019-110603RB-I00 and the collaboration of projects RTI2018-099052-B-I00 and PID2020-114978GB-I00, MCIN/AEI/FEDER/UE/10.13039/501100011033. This is a contribution from CSIC Interdisciplinary Thematic Platform Open Heritage: Research and Society (PTI-PAIS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improving uniaxial compressive strength estimation of carbonate sedimentary rocks by combining minimally invasive and non-destructive techniques

  • Benavente, David
  • Fort González, Rafael
  • Gomez-Heras, Miguel
Uniaxial compressive strength (UCS) is the most used parameter to measure rock strength. However, restrictions in sampling large volume of material, the need of very large set of results and onsite characterisation of UCS non-destructively are requirements in many scientific and engineering investigations. The estimation of UCS from a single non-destructive or minimally invasive technique (NDT) may result incomplete because each NDT is sensitive to different compositional and textural factors. This paper combines open porosity, P-wave velocity, Leeb hardness and micro-drilling resistance force to estimate USC for a wide range of carbonate sedimentary rock types with different petrographic characteristics. Results reveal that mineralogical composition significatively affects micro-drilling resistance force profiles and P-wave velocity values, especially for quartz-bearing rocks. In addition, texture controls substantially the reproducibility of tests sensible to rock surface properties, such as Leeb hardness and micro-drilling resistance force. Fifteen simple and multiple expressions for UCS are fitted. Linear expressions have shown better coefficients of determination (R2) than non-linear equations because of the linearity shown by individual parameters. Curve fitting improves as the number of petrophysical parameters increase in the multiple linear regression analysis. The best correlation is found when the equation incorporates all the mechanical parameters obtained non-destructively as well as open porosity (R2 = 0.910). Leeb hardness is always the most significant variable of the fitted regressions and its addition into multiple linear equations causes an increase of R2. Open porosity also improves R2 whereas drilling force and P-wave velocity have a lower statistical weight in the expressions. The UCS estimation from all NDT, without considering open porosity, shows a good correlation (R2 = 0.899), which presents the advantage that they can be obtained non-destructively with portable equipment and can provide a numerous set of results at relatively low cost., This work was supported by the Spanish Government [grant number D. Benavente et al. International Journal of Rock Mechanics and Mining Sciences 147 (2021) 1049158 RTI2018-099052-B-I00] and Regional Government of Madrid (Spain) [Top Heritage, grant number S2018/NMT-4372]., Peer reviewed