Skip to main content

SENSORES DE FIBRA OPTICA BASADOS EN MATERIALES NANOESTRUCTURADOS

TEC2010-17805

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Volatile organic compounds optical fiber sensor based on lossy mode resonances

  • Elosúa, César
  • Arregui, Francisco J.
  • Ruiz-Zamarreno, Carlos
  • Bariáin, Cándido
  • Luquin, Asunción
  • Laguna, Mariano
  • Matías, Ignacio R.
An optical fiber sensor to monitor volatile organic compounds (VOCs) has been developed. The sensing material used is the organometallic [Au2Ag2(C6F5)4(NH3)2]n: its optical properties show reversible changes in presence of organic vapors. The main idea consists of using the sensing features of this material to prepare a sensor based on wavelength modulation: specifically, it meets the conditions required to induce lossy mode resonances (LMRs). The sensor works in transmission configuration, depositing the sensing compound along a segment of a plastic cladding silica (PCS) fiber where the cladding was previously removed. The method followed to deposit the sensing coating is the Layer by Layer (LbL), which allows the LMR spectral location to be tuned by means of controlling the sensing coating thickness. A spectral shift to blue is observed when the device is in presence of different organic solvents: actually, it shows a linear relation between the LMR spectral shift and the vapor concentration with a sensitivity of 0.131 nm ppm−1 from 0 to 250 ppm (v/v) of methanol. In this range, the total spectral shift is around 30 nm. The cross sensitivity to relative humidity is very low (a maximum shift of 1 nm from 40 to 60% R.H.) and negligible in the case of temperature between 20°C and 60°C., The authors would like to acknowledge the financial support from the Spanish Ministerio de Educación y Ciencia through project TEC2010-17805., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Electrospun nanofiber mats for evanescent optical fiber sensors

  • Urrutia Azcona, Aitor
  • Goicoechea Fernández, Javier
  • Rivero Fuente, Pedro J.
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
In this work, a study about the optical response of electrospun nanofiber (ENF) coatings for their use in evanescent optical fiber sensors is presented. Several types of ENF mats composed of poly(acrylic acid) (PAA) were developed with different ENF diameters and densities. These ENF mats were deposited onto an optical fiber core in order to fabricate humidity evanescent optical fiber sensors. The devices were exposed to relative humidity (RH) variations from 30% RH to 95%RH. The transfer functions of the devices (transmitted optical power versus relative humidity) presented two well-differenced behaviors depending on the ENF diameter and the ENF mat density. The devices with lower ENF diameters and higher mat density showed an increase in the transmitted optical power when RH increased. On the contrary, the devices with higher ENF diameters and lower mat density showed a decrease in the transmitted optical power when RH increased. In addition to this, sensors with thinner ENF overlays, showed a higher sensitivity. In order to study the response time of these devices, the ENFs sensors were submitted to human breathing cycles and presented a response time around 340 ms (exhalation). In spite of the high RH conditions of this experiment, the devices showed a recovery time around 210 ms and a negligible hysteresis or drift with respect to the initial condition (inhalation)., This work was supported in part by the Spanish Ministry of Education and Science CICYT-FEDER TEC2010-17805 Research Grant, and a UPNA pre-doctoral research grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Experimental demonstration of lossy mode resonance generation for transverse-magnetic and transverse-electric polarizations

  • Ruiz Zamarreño, Carlos
  • Zubiate Orzanco, Pablo
  • Sagüés García, Mikel
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
This Letter, presents the fabrication of lossy mode resonance (LMR) devices based on titanium dioxide (TiO2)/ poly(sodium 4-styrenesulfonate) (PSS) coatings deposited on side-polished D-shaped optical fibers. TiO2 thin films have been obtained by means of the layer-by-layer (LbL) self-assembly technique. LbL enables us to produce smooth and homogeneous coatings on the polished side of the fiber. This permits us to couple light from the waveguide to the TiO2-coating/external medium region at specific wavelength ranges. The generation of LMRs depends on the coating thickness, so that thicker coatings can produce more resonances. LMRs are sensitive to the external medium refractive index, which allows its utilization as refractometers. The characteristic D-shaped architecture of the devices employed in this Letter enables us to distinguish TE and TM polarizations, which had not been possible before with regular optical fibers due to their cylindrical symmetry. The results presented here show for the first time the experimental demonstration of the generation of LMRs produced by both TM and TE polarizations. More specifically, for these TiO2/PSS thin films, the TM and TM modes of the LMRs show a wavelength shift of 226 nm for the first-order LMR and 56 nm for the second-order LMR., This work was supported by the Spanish Ministry of Science and Innovation TEC2010-17805.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

An antibacterial submicron fiber mat with in situ synthesized silver nanoparticles

  • Rivero Fuente, Pedro J.
  • Urrutia Azcona, Aitor
  • Goicoechea Fernández, Javier
  • Rodríguez, Yoany
  • Corres Sanz, Jesús María
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
This work presents an alternative approachfor fabricating electrospun submicron highly hydrophilicfiber mats loaded with silver nanoparticles. These fiber matsshow a high efficient antibacterial behavior, very attractivefor applications like wound healing and skin regenerationprocesses. The fabrication method is divided in two steps.First, poly(acrylic acid) (PAA) and b-cyclodextrin (b-CD)submicron fibers were electrospun and further stabilizedusing a thermal treatment, yielding stable hydrogel-likefibers with diameters ranging from 100 nm up to severalmicrons. In the second step, silver ions were loaded into thefibers and then reduced to silver nanoparticles in-situ. Theelectrospinning parameters were adjusted to achieve thedesired properties of the fiber mat (density, size) and after-wards, the characteristics of the silver nanoparticles(amount, size, aggregation) were tuned by controlling thesilver ion loading mechanism. Highly biocide surfaces wereachieved showing more than 99.99% of killing efficiency.The two-step process improves the reproducibility and tun-ability of the fiber mats. To our knowledge, this is the firsttime that stable hydrogel fibers with a highly biocide behav-ior have been fabricated using electrospinning., Spanish Ministry of Educationand Science, CICYT-FEDER TEC2010-17805, Fuentes DutorFoundation research grant (COIINA).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A comparative study of two different approaches for the incorporation of silver nanoparticles into layer-by-layer films

  • Rivero Fuente, Pedro J.
  • Goicoechea Fernández, Javier
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
UPNa. Departamento de Ingeniería Eléctrica y Electrónica. Laboratorio de Dispositivos Ópticos Nanoestructurados, In this work, a comparative study about the incorporation of silver nanoparticles (AgNPs) into thin films is presented using two alternative methods, the in situ synthesis process and the layer-by-layer embedding deposition technique. The influence of several parameters such as color of the films, thickness evolution, thermal post-treatment, or distribution of the AgNPs along the coatings has been studied. Thermal post-treatment was used to induce the formation of hydrogel-like AgNPs-loaded thin films. Cross-sectional transmission electron microscopy micrographs, atomic force microscopy images, and UV-vis spectra reveal significant differences in the size and distribution of the AgNPs into the films as well as the maximal absorbance and wavelength position of the localized surface plasmon resonance absorption bands before and after thermal post-treatment. This work contributes for, This work was supported by the Spanish Ministry of Economy and Competitiveness through TEC2010-17805 Research Project, Innocampus Program and Public University of Navarra (UPNA) research grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Development of a low mobility IEEE 802.15.4 compliant VANET system for urban environments

  • Nazábal Urriza, Juan Antonio
  • Falcone Lanas, Francisco
  • Fernández Valdivielso, Carlos
  • Matías Maestro, Ignacio
The use of Vehicular Ad-Hoc Networks (VANETs) is growing nowadays and it includes both roadside-to-vehicle communication (RVC) and inter-vehicle communication (IVC). The purpose of VANETs is to exchange useful information between vehicles and the roadside infrastructures for making an intelligent use of them. There are several possible applications for this technology like: emergency warning system for vehicles, cooperative adaptive cruise control or collision avoidance, among others. The objective of this work is to develop a VANET prototype system for urban environments using IEEE 802.15.4 compliant devices. Simulation-based values of the estimated signal strength and radio link quality values are obtained and compared with measurements in outdoor conditions to validate an implemented VANET system. The results confirm the possibility of implementing low cost vehicular communication networks operating at moderate vehicular speeds., This work has been supported by following projects Ref. IIM010566. RI1 from the Government of Navarre, Industry Department and the Ministry of Economy and Competitiveness of Spain through project TEC2010-17805.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Humidity sensor based on silver nanopartlcles embedded in a polymeric coating

  • Rivero Fuente, Pedro J.
  • Urrutia Azcona, Aitor
  • Goicoechea Fernández, Javier
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
In this work, it is presented a novel optical fiber humidity sensor based on silver nanoparticle-loaded polymeric coatings built onto an optical fiber core. The polymeric film was fabricated using the Layer-by-Layer assembly technique. The silver nanoparticles (Ag NPs) were characterized using transmission electron microscopy (TEM and UV-VIS spectroscopy. A Localized Surface Plasmon Resonance (LSPR) attenuation band is observed when the thickness of the coating increases, and showed a very good sensitivity to Relative Humidity (RH) variations, suitable for high performance applications such as human breathing monitoring., This work was supported in part by the Spanish Ministry of Education and Science CICYT FEDER TEC2010-17805 Research Grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Effect of both protective and reducing agents in the synthesis of multicolor silver nanoparticles

  • Rivero Fuente, Pedro J.
  • Goicoechea Fernández, Javier
  • Urrutia Azcona, Aitor
  • Arregui San Martín, Francisco Javier
UPNa. Departamento de Ingeniería Eléctrica y Electrónica. Laboratorio de Dispositivos Ópticos Nanoestructurados, In this paper, the influence of variable molar ratios between reducing and loading agents (1:100, 1:50, 1:20, 1:10, 1:5, 1:2, 1:1, 2:1) and between protective and loading agents (0.3:1, 0.75:1, 1.5:1, 3:1, 7.5:1, 30:1, 75:1) in the synthesis of silver nanoparticles by chemical reduction has been evaluated to obtain multicolor nanoparticles with a high stability in time. The protective agent poly(acrylic acid, sodium salt) (PAA) and reducing agent dimethylaminoborane (DMAB) play a key role in the formation of the resultant color. Evolution of the optical absorption bands of the silver nanoparticles as a function of PAA and DMAB molar ratios made it possible to confirm the presence of silver nanoparticles or clusters with a specific shape. The results reveal that a wide range of colors (violet, blue, green, brown, yellow, red, orange), sizes (from nanometer to micrometer), and shapes (cubic, rod, triangle, hexagonal, spherical) can be perfectly tuned by means of a fine control of the PAA and DMAB molar concentrations., This work was supported in part by the Spanish Ministry of Education and Science CICYT FEDER TEC2010-17805 research grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Fiber-optic biosensor based on lossy mode resonances

  • Socorro Leránoz, Abián Bentor
  • Corres Sanz, Jesús María
  • Del Villar, Ignacio
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
Acceso cerrado a este documento. No se encuentra disponible para la consulta pública. Depositado en Academica-e para cumplir con los requisitos de evaluación y acreditación académica del autor/a (sexenios, acreditaciones, etc.)., In this work, a novel fiber-optic immunoglobulin G biosensor based on lossy mode resonances is proposed. This physical phenomenon is obtained by depositing a PAH/PSS layer-by-layer thin-film on a cladding removed optical fiber. A reflective configuration is used to track the generation and response of the electromagnetic resonance in the different phases of the process. According to the results, wavelength displacements of 10 nm are visualized when detecting immunoglobulins with a response time of 12 min for a 50 μg/ml concentration.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Tapered single-mode optical fiber pH sensor based on lossy mode resonances generated by a polymeric thin-film

  • Socorro Leránoz, Abián Bentor
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
Lossy mode resonances can be generated with certain polymeric nanostructures, such as those obtained with a multilayered assembly of poly(allylamine hydrochloride) and poly (acrylic acid). This coating is adsorbed by the electrostatic self assembly technique onto a tapered single-mode optical fiber, in order to evaluate its performance when detecting pH. According to the results reported in this work, the high sensitivity given by a tapering process in a single-mode optical fiber is increased by the effect of this kind of electromagnetic resonances. Particularly, in a pH range from 4.0 to 6.0 the overall wavelength shift of this sensor reaches 200 nm and the transmission at the resonance wavelengths can fall down to -50 dB. These data provide results which can be taken into account to detect pH with high accuracy., This work was supported by a Pre-Doctoral Research Grant of the Public University of Navarra and by the Spanish Economy and Competitivity Ministry-FEDER TEC2010-17805.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Spectral width reduction in lossy mode resonance-based sensors by means of tapered optical fibre structures

  • Socorro Leránoz, Abián Bentor
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
This contribution pursues the goal of achieving an optical fibre-based platform to detect anti-gliadin antibodies (AGAs), in order to early diagnose celiac disease. To this purpose, the generation of lossy mode resonances (LMRs) in several evanescent field optical structures was studied both theoretically and experimentally. LMRs were obtained by adsorbing a polymeric thin-film onto the optical structures using the layer-by-layer assembly technique. The LMR shape depends on the geometry of the optical structure and its attenuation was controlled just by tuning the length of the device. The best performance was obtained with tapered single-mode optical fibres, which provided more than a 50% reduction in the spectral width of the LMR by using a shorter device. This improvement was successfully applied to detect anti-gliadin antibodies (AGAs) in 5 ppm concentration, what can be used to diagnose celiac disease, and shows the potential of this technology to address biosensing applications., This work was supported by a Pre-doctoral Research Grant of the Public University of Navarra and by the Spanish Economy and Competitiveness Ministry FEDER TEC2010-17805.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A fiber optic ammonia sensor using a universal pH indicator

  • Rodríguez Rodríguez, Adolfo Josué
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
  • Cruz, René
  • May Arrioja, Daniel A.
A universal pH indicator is used to fabricate a fiber optic ammonia sensor. The advantage of this pH indicator is that it exhibits sensitivity to ammonia over a broad wavelength range. This provides a differential response, with a valley around 500 nm and a peak around 650 nm, which allows us to perform ratiometric measurements. The ratiometric measurements provide not only an enhanced signal, but can also eliminate any external disturbance due to humidity or temperature fluctuations. In addition, the indicator is embedded in a hydrophobic and gas permeable polyurethane film named Tecoflex®. The film provides additional advantages to the sensor, such as operation in dry environments, efficient transport of the element to be measured to the sensitive area of the sensor, and prevent leakage or detachment of the indicator. The combination of the universal pH indicator and Tecoflex® film provides a reliable and robust fiber optic ammonia sensor., We appreciate the support from the Consejo Nacional de Ciencia y Tecnología (CONACyT) under contract CB-2010/157866. This work was also supported by the Spanish Economy and Competitivity Ministry-FEDER TEC2010-17805.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Influence of waist length in lossy mode resonances generated with coated tapered single mode optical fibers

  • Socorro Leránoz, Abián Bentor
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
  • Arregui San Martín, Francisco Javier
  • Matías Maestro, Ignacio
In this work, the generation of electromagnetic resonances due to the deposition of a nanocoating on a tapered single-mode optical fiber is analyzed. The layer-by-layer technique is used to control the thickness of the nanocoating. According to the results that have been obtained, the depth of the resonance depends on the length of the waist region. Variations in the transmitted optical power of 40 dB are observed in just a few layers. This can be considered in the fabrication of both highly sensitive resonance-based sensors and optical filters., This work has been supported by a Public University of Navarre FPI grant and by the TEC2010-17805 MIC subprogram.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Comparative study of layer-by-layer deposition techniques for poly(sodium phosphate) and poly (allylamine hydrochloride)

  • Elosúa Aguado, César
  • López Torres, Diego
  • Hernáez Sáenz de Zaitigui, Miguel
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
UPNa. Departamento de Ingeniería Eléctrica y Electrónica. Laboratorio de Dispositivos Ópticos Nanoestructurados, An inorganic short chain polymer, poly(sodium phosphate), PSP, together with poly(allylamine hydrochloride), PAH, is used to fabricate layer-by-layer (LbL) films. The thickness, roughness, contact angle, and optical transmittance of these films are studied depending on three parameters: the precursor solution concentrations (10−3 and 10−4 M), the number of bilayers deposited (20, 40, 60, 80, and 100 bilayers), and the specific technique used for the LbL fabrication (dipping or spraying). In most cases of this experimental study, the roughness of the nanofilms increases with the number of bilayers. This contradicts the basic observations made in standard LbL assemblies where the roughness decreases for thicker coatings. In fact, a wide range of thickness and roughness was achieved by means of adjusting the three parameters mentioned above. For instance, a roughness of 1.23 or 205 nm root mean square was measured for 100 bilayer coatings. Contact angles close to 0 were observed. Moreover, high optical transmittance is also reported, above 90%, for 80 bilayer films fabricated with the 10−4 M solutions. Therefore, these multilayer structures can be used to obtain transparent superhydrophilic surfaces., This work was supported by the Spanish Economy and Competitiveness Ministry-FEDER TEC2010-17805.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Multicolor layer-by-layer films using weak polyelectrolyte assisted synthesis of silver nanoparticles

  • Rivero Fuente, Pedro J.
  • Goicoechea Fernández, Javier
  • Urrutia Azcona, Aitor
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
UPNa. Departamento de Ingeniería Eléctrica y Electrónica. Laboratorio de Dispositivos Ópticos Nanoestructurados, In the present study, we show that silver nanoparticles (AgNPs) with different shape, aggregation state and color (violet, green, orange) have been successfully incorporated into polyelectrolyte multilayer thin films using the layerby- layer (LbL) assembly. In order to obtain colored thin films based on AgNPs is necessary to maintain the aggregation state of the nanoparticles, a non-trivial aspect in which this work is focused on. The use of Poly(acrylic acid, sodium salt) (PAA) as a protective agent of the AgNPs is the key element to preserve the aggregation state and makes possible the presence of similar aggregates (shape and size) within the LbLcolored films. This approach based on electrostatic interactions of the polymeric chains and the immobilization of AgNPs with different shape and size into the thin films opens up a new interesting perspective to fabricate multicolornanocomposites based on AgNPs., This work was supported in part by the Spanish Ministry of Economy and Competitiveness CICYT FEDER TEC2010-17805 research grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Gasohol quality control for real time applications by means of a multimode interference fiber sensor

  • Rodríguez Rodríguez, Adolfo Josué
  • Baldovino Pantaleón, Oscar
  • Cruz, René
  • Ruiz Zamarreño, Carlos
  • Matías Maestro, Ignacio
  • May Arrioja, Daniel A.
In this work we demonstrate efficient quality control of a variety of gasoline and ethanol (gasohol) blends using a multimode interference (MMI) fiber sensor. The operational principle relies on the fact that the addition of ethanol to the gasohol blend reduces the refractive index (RI) of the gasoline. Since MMI sensors are capable of detecting small RI changes, the ethanol content of the gasohol blend is easily determined by tracking the MMI peak wavelength response. Gasohol blends with ethanol contents ranging from 0% to 50% has been clearly identified using this device, which provides a linear response with a maximum sensitivity of 0.270 nm/% EtOH. The sensor can also distinguish when water incorporated in the blend has exceeded the maximum volume tolerated by the gasohol blend, which is responsible for phase separation of the ethanol and gasoline and could cause serious engine failures. Since the MMI sensor is straightforward to fabricate and does not require any special coating it is a cost effective solution for real time and in-situ monitoring of the quality of gasohol blends., The authors appreciate the support from the Consejo Nacional de Ciencia y Tecnología (CONACyT) under contract CB-2010/157866 and CB-2010/156529. This work was also supported by the Spanish Economy and Competitivity Ministry-FEDER TEC2010-17805.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Single-stage in situ synthesis of silver nanoparticles in antibacterial self-assembled overlays

  • Urrutia Azcona, Aitor
  • Rivero Fuente, Pedro J.
  • Ruete Ibarrola, Leyre
  • Goicoechea Fernández, Javier
  • Matías Maestro, Ignacio
  • Arregui San Martín, Francisco Javier
In this work, a novel single-stage process for in situ synthesis of Ag nanoparticles (NPs) using the layer-bylayer (LbL) technique is presented. The Ag NPs were formed into nanotextured coatings based on sequentially adsorbed poly(allylamine hydrochloride) (PAH) and SiO2 NPs. Such highly porous surfaces have been used in the fabrication of highly efficient ion release films for applications such as antibacterial coatings. In this approach, the amino groups of the PAH acted as reducing agent and made possible the in situ formation of the Ag NPs. This reduction reaction occurred during the LbL process as the coating was assembled, without any further step after the fabrication and stabilization of the multilayer film. Biamminesilver nitrate was used as the Ag+ ion source during the LbL process and it was successfully reduced to Ag NPs. All coatings were tested with gram-positive and gram-negative bacterial cultures of Escherichia coli, Staphylococcus aureus, and Lactobacillus delbrueckii showing an excellent antimicrobial behavior against these types of bacteria (more than 99.9% of killing efficiency in all cases)., This work was supported in part by the Spanish Ministry of Education and Science-CICYT-FEDER TEC2010-17805 Research Grant and the Fuentes Dutor Foundation research grant, managed by COIINA.