Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Bond and tensile behaviour of textile reinforced mortars with traditional and alternative matrices

  • Escobar, Kevin Isaac
  • Murcia Delso, Juan
  • Oller Ibars, Eva
Reinforced and prestressed concrete structures frequently need to be repaired and strengthened during their service life due to corrosion deterioration and other pathologies. Composite materials, such as textile reinforced mortar (TRM), have emerged as a promising solution for restoring or improving the load bearing capacity of structural concrete. Previous studies have demonstrated that the effectiveness of this strengthening technique relies mostly on the bond between the textile and the matrix as well as on the bonded length to the substrate. The research presented in this paper aims to evaluate the efficiency of bond characteristics as well as the mechanical properties of various TRM systems. Carbon and basalt textiles were investigated along with conventional cement mortar and alternative mortars with short glass or synthetic fibres. To examine the bond behaviour of each system, a single lap shear test configuration was used. Tensile testing was carried out using a clevis grip or a clamping configuration. The tension and bond properties obtained from the tests are analysed and compared, and recommendations are presented regarding the bond and tensile test setups., The study presented in this paper was developed in the scope of research project PID2021-123701OB-C21 funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033/) and the European Regional Development Funds (ERDF) as well as research project TED2021-130272B-C21 funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) and the European Union NextGenerationEU/ PRTR. The first author would like to acknowledge the FI SDUR scholarship program for their invaluable support. The authors would also like to acknowledge the dedicated LATEM laboratory staff of the UPC, whose expertise and assistance were important throughout the experimental campaign. Additionally, the authors would like to thank Mapei and their employees, for their courtesy supplying required materials and giving technical assistance when needed., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Mechanical characterization of hemp textile reinforced mortars for structural strengthening applications

  • Escobar, Kevin Isaac
  • Oller Ibars, Eva
  • Murcia Delso, Juan
  • Fernández Carrasco, Lucía
© <2025> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The use of natural fibres in textile reinforced mortar (TRM) has gained interest because of their environmental benefits, low cost, and ability to reduce construction ecological footprint. This study evaluates the mechanical properties of hemp-based TRM systems for flexural strengthening of reinforced concrete (RC) structures. TRM composites made of different types of mortars and textile reinforcement ratios were tested experimentally. Uniaxial tests with clevis grip and single-lap shear tests were conducted to determine the tensile strength and bond behaviour of the hemp-based TRM systems. The analysis of results was aided by digital image correlation (DIC). The results from tensile tests show that the textile reinforcement ratio and the mortar type influence cracking behaviour. Composites with 1¿% of reinforcement ratio and ordinary Portland cement (OPC) mortar exhibited the highest capacity, with 845¿MPa of tensile strength and 2.1¿% of maximum strain. In bond tests, mortar debonding at the matrix-textile interface was the primary failure mode with exploitation ratios ranging from 50.5¿% to 78.3¿%. Composites with calcium sulfoaluminate (CSAC) mortar showed variable responses, with TRM debonding at shorter lengths and matrix-interface failure at longer lengths. Effective bond lengths for the different series were in a range of 109¿mm to 125¿mm. Additionally, flexural tests with a three-point bending configuration were performed on beams strengthened with TRM using hemp and carbon textiles. Concrete crushing with partial TRM debonding was the failure mode of the strengthened beams. Controlling the debonding is critical to enhance the efficiency of TRM and fully activate the textile., This research was conducted under projects PID2021-123701OB-C21, financed by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033/) and the European Regional Development Funds (ERDF), as well as TED2021-130272B-C21, supported by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) and the European Union NextGenerationEU/PRTR initiative. The first author gratefully acknowledges the FI SDUR scholarship program for its invaluable support. The authors also express their gratitude to the LATEM laboratory team at UPC, whose expertise and assistance were active during the experimental work. Lastly, the authors wish to thank Mapei company and its staff for generously providing carbon textiles and epoxy resin used in this study., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Stochastic model for the mechanical properties degradation of corroded reinforcement bars

  • Benedetti Leonelli, Franco
  • Duarte Gómez, Noemí
  • Bairán García, Jesús Miguel
Corrosion is a main threat for the long-term safety of reinforced concrete structures. Its effects can severely compromise the mechanical properties of steel rebar, but proper estimation of residual properties is challenging due to the complex nature and damaged morphology of the corrosion processes and its inherent uncertainty. This work develops a stochastic approach for the prediction of rebar's material properties decay based on Gaussian Process Regression (GPR) techniques and a comprehensive collection of experimental and natural corrosion test results. The studied mechanical properties degradation are the yield stress, ultimate stress, and ultimate strain. Proposed models are trained and validated using existing data of rebars' decay, providing both a suitable prediction of mean trends and confident uncertainty quantification for different corrosion conditions and scenarios. Findings suggest that corrosion effects are mechanism dependent and that chloride induced corrosion effects represent the most severe natural and artificial degradation, particularly on embedded bar tests. Besides, GPR models developed are well-calibrated and highly precise for predicting stress decay but reflect the large scatter of ultimate strain. Finally, it is found that existing deterministic models tend to underestimate the observed mechanical properties decay., The authors appreciate the support provided by ANID through Becas Chile 2024 Folio 72240052. This study was developed within the scope of research projects PID2021-123701OB-C21, funded by MCIN/AEI/10.13039/501100011033 and European Regional Development Funds (ERDF) “A way to make Europe”, and TED2021-130272B-C21 funded by MCIN/AEI/10.13039/501100011033 “European Union NextGenerationEU/PRTR”., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Influence of wall thickness on the seismic performance of thin-walled precast UHPC hollow piers

  • Wang, Xu
  • Liu, Zhao
  • Bairán García, Jesús Miguel
  • Li, Wenshan
Conventional precast piers made of normal concrete (NC) typically feature a solid section, which may hinder hoisting and transportation during construction. Given the superior properties of ultra-high-performance concrete (UHPC), replacing the NC solid section with a UHPC hollow section presents a viable alternative. However, the seismic performance of thin-walled piers will be different from the solid piers. Current research on the seismic performance of hollow piers primarily focuses on cast-in-place (CIP) piers made of normal concrete, which generally have thick walls and a hollow ratio <0.4. The exceptional mechanical properties and fluidity of UHPC make it feasible to reduce wall thickness in hollow piers. Nevertheless, studies specifically investigating the seismic performance of UHPC hollow piers remain limited. This study presents an experimental investigation of four precast piers with varying wall thicknesses—three made of UHPC and one made of NC as a reference. Quasi-static tests were conducted and the hysteretic responses, energy dissipation, residual displacement, and curvature distribution were discussed. Finally, a refined numerical model was developed on OpenSees platform to accurately replicate the hysteretic and skeleton curves of each specimen. Parametric and time-history analyses were conducted under six strong near-fault ground motions. The results revealed that wall thickness had a limited effect on the strength and residual displacement of UHPC hollow piers, but significantly influenced cumulative energy dissipation and stiffness degradation. The UHPC pier with a hollow ratio of 0.36 exhibited the best strength and displacement responses among all specimens., This research is supported by the National Key Research and Development Program of China (No. 2019YFE0119800), the China Scholarship Council (CSC), during a research stay of the first author in the Universitat Politècnica de Catalunya. The third author acknowledges the support of research projects TED2021-130272B-C21 funded by MCIN/550 AEI/10.13039/501100011033 “European Union Next Generation EU/PRTR” and PID2021-123701OB-C21, funded by MCIN/AEI/10.13039/501100011033 and European Regional Development Funds (ERDF) “A way to make Europe”., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Model for the assessment of rectangular reinforced concrete columns with limited confinement details

  • Benedetti Leonelli, Franco
  • Bairán García, Jesús Miguel
Existing reinforced concrete structures often feature non-seismic or sub-standard transverse reinforcement, typically with poorly anchored 90° hooks. These details limit stirrup and crosstie confinement, leading to premature strength loss or failure. While common in existing structures and sometimes in new designs, accurately accounting for them is vital for determining the confinement degree, which impacts ductility and ultimate capacity. This work proposes a mechanistic approach for assessing reinforced concrete columns with such limitations. It first develops an analysis-oriented model for predicting the confinement pressure loss in poorly anchored reinforcement, based on static equilibrium and kinematic rules. Secondly, it presents a scheme for a limited confinement constitutive function, considering premature loss, restricted capacity, and section configuration, by adapting existing models. Validation against lateral load tests shows good accuracy in predicting failure points, with less than 10% difference in lateral load capacity and displacement at failure compared to experimental results., This work was developed with the financial support of Fundacion ´ Carolina through Becas de Doctorado 2023 grant as well as from ANID through Becas Chile 2024 Folio 72240052. In addition, projects PID2021–123701OB-C21, funded by MCIN/ AEI/10.13039/ 501100011033 and European Regional Development Funds (ERDF) “A way to make Europe”, and TED2021–130272B-C21 funded by MCIN/ AEI/10.13039/501100011033 “European Union NextGenerationEU/ PRTR” also contribute to the research., Peer Reviewed, Postprint (published version)