Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A low-cost open-cavity moisture content sensor for flour-based matrices in the 5-6.8 GHz range

  • Quemada Mayoral, Carlos
  • Ederra Urzainqui, Íñigo
  • Gonzalo García, Ramón
  • Iriarte Galarregui, Juan Carlos
This study presents the design, implementation and experimental validation of a low-cost and non-destructive water content monitoring sensor for thin corn tortilla samples, intended as a first prototype for potential integration into food production lines. The sensor operates in the 5-6.8 GHz frequency range, with moisture estimation performed at the sensor resonance frequency. This sensor, consisting of an open horn-shaped resonant cavity, represents a first prototype that could potentially be integrated into existing production lines for these food products, highlighting its potential for future industrial implementation. The development of an efficient and thorough design flow, which combines an accurate theoretical calculation of the complex permittivity of the samples with electromagnetic simulations, has allowed the design of a humidity sensor whose simulation model estimates water content in corn tortilla samples with a root mean square error (RMSE) below 0.8 % with respect to the measurements. From the results obtained with this sensor, two moisture estimation models are developed: a simulation-derived regression model, validated using experimental measurements (RMSE < 0.8 %), and a purely experimental regression model. The simulation-derived model achieves a coefficient of determination (R2) of 0.99, while the experimental model yields an R2 of 0.91 and an RMSE below 0.4 %. Due to its easy implementation, low cost, excellent correlation and reduced estimation errors, this prototype constitutes the first step towards the design of a non-destructive and cost-effective moisture sensor at microwave frequencies to be applied in food production lines., The authors of this paper acknowledge the Spanish State Research Agency for funding this research under the PID2023-146064OB-C31 and TED2021-130364B-I00 projects.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Portable and low-cost radar sensor for moisture content estimation of flour-based matrices in the 76-81 GHz millimeter-wave range

  • Quemada Mayoral, Carlos
  • Sada Allo, Maider
  • Beruete Díaz, Miguel
  • Angós Iturgaiz, Ignacio
  • Ederra Urzainqui, Íñigo
  • Gonzalo García, Ramón
  • Iriarte Galarregui, Juan Carlos
This article presents the first study of food moisture content (MC) estimation using a portable, cost-effective, and low-power millimeter-wave sensor operating in the 76–81-GHz automotive radar band. Recent advances in fully integrated, off-the-shelf radar transceivers enable the development of compact and affordable sensing solutions suitable for in-line food inspection. The proposed approach estimates the MC of flourbased matrices by correlating the electromagnetic attenuation losses introduced by the sample in a round-trip configuration with gravimetrically determined water content. Experimental validation was carried out on 40 corn tortilla samples covering moisture concentrations between 30 % and 40.4 %. Two regression approaches were evaluated. While a linear model provided a coefficient of determination (R2) of 0.943, residual analysis revealed systematic deviations. To address this limitation, a logarithmic calibration model was implemented and validated using leave-one-out cross-validation (LOOCV), achieving R2 = 0.971, a root mean square error of cross-validation (RMSECV) of 0.857 %, and negligible bias. The logarithmic model reduced the prediction error by 32 % compared to the linear approach and eliminated structural residual trends. These results demonstrate that millimeter-wave, frequency-modulated continuous-wave (FMCW) radar technology enables accurate, real-time, and noncontact MC estimation, paving the way for fully portable and industrially deployable in-line food sensing systems., This work was supported in part by the Spanish State Research Agency under Project PID2023-146064OB-C31 and Project TED2021-130364B-I00 and in part by the Open access funding provided by Universidad Publica de Navarra.