Skip to main content

SISTEMAS Y TECNICAS RADAR MULTIPLATAFORMA PARA LA MONITORIZACION CONTINUA DE LA TIERRA

TIN2014-55413-C2-1-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Micrometric deformation imaging at W-Band with GBSAR

  • Martínez, Arturo
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Lort Cuenca, Marc
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
The paper presents the experimental evaluation of 94 GHz CW-FM Radar that can be configured as a Ground Based SAR (Synthetic Aperture Radar) for high resolution imaging and deformation control. This system has been designed to obtain and analyze data of deformations on different types of bodies, being able to detect range changes of the order of micrometers. After indoor testing and validation measurements, several experimental results obtained in different scenarios are presented. Finally the possibility of using the system for remote contact-less patient monitoring is analyzed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Impact of wind-induced scatterers motion on GB-SAR imaging

  • Lort Cuenca, Marc
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • López Martínez, Carlos|||0000-0002-1366-9446
  • Fabregas Canovas, Francisco Javier|||0000-0002-7654-9695
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Ground-based synthetic aperture radar (GB-SAR) sensors represent a cost-effective solution for change detection and ground displacement assessment of small-scale areas in real-time early warning applications. GB-SAR systems based on stepped linear frequency modulated continuous wave signals have led to several improvements such as a significant reduction of the acquisition time. Nevertheless, the acquisition time is still long enough to force a degradation of the quality of the reconstructed images because of possible short-term variable reflectivity of the scenario. This reduction of the quality may degrade the differential interferometric detection process. In scenarios where interesting targets are surrounded by vegetation, this is normally related to atmospheric conditions, in particular, the wind. The present paper characterizes the effect of the short-term variable reflectivity in the GB-SAR image reconstruction and evaluates its equivalent blurring effect, the decorrelation introduced in the SAR images, and the degradation of the extracted parameters. In order to validate the results, the study assesses different GB-SAR images obtained with the RISKSAR-X sensor, which has been developed by the Universitat Politècnica de Catalunya., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Higher order statistics for texture analysis and physical interpretation of polarimetric SAR data

  • Deng, Xinping
  • López Martínez, Carlos|||0000-0002-1366-9446
The logarithmic cumulants (log-cumulants for short) of the second and third orders are widely used in the statistical analysis of polarimetric synthetic aperture radar (PolSAR) data. However, both the product model and the finite mixture model may produce the same values of these statistics, which means that the use of these log-cumulants is not enough to determine the statistical model of the data. In this letter, it is demonstrated that the log-cumulants of higher orders can help to distinguish the concept of texture from that of mixture, providing a physical insight into the data statistics. A tool called log-cumulant cube, which helps to visualize this difference, is proposed by considering texture distributions from the Pearson's family. Results on both simulated and real SAR data show that the use of higher order statistics is useful when it comes to the texture analysis of PolSAR data., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Assessment of 3-D printing technologies for millimeter-wave reflectors

  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Blanch Boris, Sebastián|||0000-0002-8757-583X
  • Vidal, Neus
  • Lopez-Villegas, Jose Maria
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Three different 3D printing technologies: Stereolithography (SLA), Fused Deposition Modeling (FDM) and HP Multi Jet Fusion Technology (MJF) are compared to build a parabolic reflector operating at 100 GHz. Fabrication tolerance and surface roughness before and after metallization are accurately measured. The performance of the reflectors is measured in the near field and its performance is compared against an optical grade reflector. In this way the performance of the final product is thoroughly assessed, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Collimated beam FMCW radar for vital sign patient monitoring

  • Prat, Arnau
  • Blanch Boris, Sebastián|||0000-0002-8757-583X
  • Aguasca Solé, Alberto|||0000-0003-2079-4322
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Broquetas Ibars, Antoni|||0000-0001-9801-9145
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Patient monitoring of vital signals such as breathing rhythm and heart beat rate can be done remotely by the use of a radar system. This approach is advantageous since it does not require any contact with the patient. Obviously contactless monitoring results in a more comfortable situation for the patient, and in occasions it is almost mandatory as in the case of heavy burnt or newborn patients. Moreover, additional information such movement patterns are also available. A 120 GHz FMCW radar is described with special focus on the design, construction and testing of a specific reflector antenna for the system. The system is based on a commercial radar chipset that includes its own antennas. The challenge has been to design the optimum reflector and to build it and test it in a cost effective way. The reflector has been 3D printed and a near-field testing technique has been implemented to assess its performance. The results show that the system is able to measure the vital signs at distances beyond one meter.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Micrometric deformation imaging at W-Band with GBSAR

  • Martínez, Arturo
  • Aguasca Solé, Alberto
  • Lort Cuenca, Marc
  • Broquetas Ibars, Antoni
The paper presents the experimental evaluation of 94 GHz CW-FM Radar that can be configured as a Ground Based SAR (Synthetic Aperture Radar) for high resolution imaging and deformation control. This system has been designed to obtain and analyze data of deformations on different types of bodies, being able to detect range changes of the order of micrometers. After indoor testing and validation measurements, several experimental results obtained in different scenarios are presented. Finally the possibility of using the system for remote contact-less patient monitoring is analyzed., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Impact of wind-induced scatterers motion on GB-SAR imaging

  • Lort Cuenca, Marc
  • Aguasca Solé, Alberto
  • López Martínez, Carlos
  • Fabregas Canovas, Francisco Javier
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Ground-based synthetic aperture radar (GB-SAR) sensors represent a cost-effective solution for change detection and ground displacement assessment of small-scale areas in real-time early warning applications. GB-SAR systems based on stepped linear frequency modulated continuous wave signals have led to several improvements such as a significant reduction of the acquisition time. Nevertheless, the acquisition time is still long enough to force a degradation of the quality of the reconstructed images because of possible short-term variable reflectivity of the scenario. This reduction of the quality may degrade the differential interferometric detection process. In scenarios where interesting targets are surrounded by vegetation, this is normally related to atmospheric conditions, in particular, the wind. The present paper characterizes the effect of the short-term variable reflectivity in the GB-SAR image reconstruction and evaluates its equivalent blurring effect, the decorrelation introduced in the SAR images, and the degradation of the extracted parameters. In order to validate the results, the study assesses different GB-SAR images obtained with the RISKSAR-X sensor, which has been developed by the Universitat Politècnica de Catalunya., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Collimated beam FMCW radar for vital sign patient monitoring

  • Prat, Arnau
  • Blanch Boris, Sebastián
  • Aguasca Solé, Alberto
  • Romeu Robert, Jordi
  • Broquetas Ibars, Antoni
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Patient monitoring of vital signals such as breathing rhythm and heart beat rate can be done remotely by the use of a radar system. This approach is advantageous since it does not require any contact with the patient. Obviously contactless monitoring results in a more comfortable situation for the patient, and in occasions it is almost mandatory as in the case of heavy burnt or newborn patients. Moreover, additional information such movement patterns are also available. A 120 GHz FMCW radar is described with special focus on the design, construction and testing of a specific reflector antenna for the system. The system is based on a commercial radar chipset that includes its own antennas. The challenge has been to design the optimum reflector and to build it and test it in a cost effective way. The reflector has been 3D printed and a near-field testing technique has been implemented to assess its performance. The results show that the system is able to measure the vital signs at distances beyond one meter., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Higher order statistics for texture analysis and physical interpretation of polarimetric SAR data

  • Deng, Xinping
  • López Martínez, Carlos
The logarithmic cumulants (log-cumulants for short) of the second and third orders are widely used in the statistical analysis of polarimetric synthetic aperture radar (PolSAR) data. However, both the product model and the finite mixture model may produce the same values of these statistics, which means that the use of these log-cumulants is not enough to determine the statistical model of the data. In this letter, it is demonstrated that the log-cumulants of higher orders can help to distinguish the concept of texture from that of mixture, providing a physical insight into the data statistics. A tool called log-cumulant cube, which helps to visualize this difference, is proposed by considering texture distributions from the Pearson's family. Results on both simulated and real SAR data show that the use of higher order statistics is useful when it comes to the texture analysis of PolSAR data., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Assessment of 3-D printing technologies for millimeter-wave reflectors

  • Romeu Robert, Jordi
  • Blanch Boris, Sebastián
  • Vidal, Neus
  • Lopez-Villegas, Jose Maria
  • Aguasca Solé, Alberto
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Three different 3D printing technologies: Stereolithography (SLA), Fused Deposition Modeling (FDM) and HP Multi Jet Fusion Technology (MJF) are compared to build a parabolic reflector operating at 100 GHz. Fabrication tolerance and surface roughness before and after metallization are accurately measured. The performance of the reflectors is measured in the near field and its performance is compared against an optical grade reflector. In this way the performance of the final product is thoroughly assessed, Peer Reviewed, Postprint (published version)