Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico antes de ser publicado, versión del autor (Preprint)

Fine particle flow pattern and region delimitation in fountain confined conical spouted beds

  • Tellabide Vecina, Mikel
  • Estiati Larrea, Idoia
  • Achutegui Narbona, Aitor
  • Altzibar Manterola, Haritz
  • Aguado Zárraga, Roberto
  • Olazar Aurrecoechea, Martin
[ES] Se ha utilizado una nueva técnica boroscópica junto con la monitorización de señales de fluctuación de presión (distribución espectral de potencia, PSD) para el seguimiento de partículas finas y caracterizar la dinámica del flujo sólido en lechos cónicos de fuente confinada. Se han obtenido perfiles de velocidad de partículas radiales y axiales para diferentes configuraciones, y se han delineado las interfases spout-zona anular y núcleo-periferia de la fuente. Las velocidades descendentes de las partículas en la zona anular alcanzan su máximo en posiciones intermedias en esta zona, mientras que las velocidades ascendentes en las zonas diluidas (spout y núcleo de la fuente) alcanzan su máximo en el eje o cerca de esta posición. Entre las diferentes configuraciones analizadas en este trabajo, el sistema sin tubo central muestra las mayores velocidades verticales de las partículas en casi todas las diferentes posiciones radiales y axiales. La evolución del tamaño del spout a lo largo del lecho depende de la configuración utilizada, pero todas difieren de las comúnmente reportadas en la literatura. De este modo, el spout se expande desde el fondo del lecho hasta la superficie, sin ningún cuello en un nivel intermedio del lecho. Además, la forma de la sección transversal del spout se ha delineado en los sistemas con tubo central de aberturas, y se observa una expansión significativa del spout debido a la filtración de aire desde el spout hacia la zona anular a través de las aberturas del tubo. Finalmente, se han comparado los diámetros promedio de los spout de los sistemas sin tubo y con tubos centrales de aberturas con los predichos por las correlaciones bibliográficas. Los propuestos por San José et al. y Volpicelli et al. proporcionan el mejor ajuste para las configuraciones sin tubo y con tubo central de aberturas, siendo sus errores relativos de 9,83% y 8,88%, respectivamente., [EN] A novel borescopic technique together with the monitoring of pressure fluctuation signals (power spectral distribution, PSD) has been used to track fine particles and characterize solid flow dynamics in fountain confined conical spouted beds. Radial and axial particle velocity profiles have been obtained for different configurations, and spout-annulus and fountain core-periphery interfaces have been delineated. The downward particle velocities in the annulus peak at intermediate positions in this zone, whereas the upward velocities in the dilute zones (spout and fountain core) peak at the axis or close to this position. Among the different configurations analysed in this work, the system without draft tube shows the greatest vertical particle velocities in almost all the different radial and axial positions. The evolution of the spout size along the bed depends on the configuration used, but all of them differ from those commonly reported in the literature. Thus, the spout expands from the bed bottom to the surface, without any neck at an intermediate bed level. Furthermore, the cross-sectional spout shape has been delineated in the systems with open-sided draft tube, and significant spout expansion is observed due to air percolation from the spout into the annulus through the opened faces. Finally, the average spout diameters of the systems without draft tube and with open-sided draft tubes have been compared with those predicted by literature correlations. Those proposed by San José et al. and Volpicelli et al. provide the best fit for the configurations without draft tube and with open-sided draft tube, with their relative errors being 9.83% and 8.88%, respectively, Este trabajo ha recibido financiación del Ministerio de Economía y Competitividad de España (CTQ2016-75535-R (AEI/FEDER, UE)) y de Ciencia e Innovación (PID2019-107357RB-I00 (AEI/FEDER, UE)), y de la Comisión Europea ( HORIZON H2020- MSCA RISE-2018.Nº de contrato: 823745). M. Tellabide agradece al Ministerio de Educación, Cultura y Deporte de España su beca de doctorado (FPU14/05814). I. Estiati agradece a la Universidad del País Vasco su beca de posgrado (ESPDOC18/14). A. Atxutegi agradece su beca de doctorado de la Universidad del País Vasco UPV/EHU (PFI15-2017).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico antes de ser publicado, versión del autor (Preprint)

Minimum spouting velocity of fine particles in fountain confined conical spouted beds

  • Tellabide Vecina, Mikel
  • Estiati Larrea, Idoia
  • Pablos Castro, Aitor
  • Altzibar Manterola, Haritz
  • Aguado Zárraga, Roberto
  • Olazar Aurrecoechea, Martin
[ES] Se ha desarrollado un novedoso dispositivo interno denominado confinador de la fuente, que estabiliza el sistema y permite operar con partículas finas, incluso sin ningún tipo de tubo central. Dada la estabilidad que este dispositivo confiere al sistema, se requieren velocidades mínimas de spouting menores que en los sistemas convencionales, por lo que las correlaciones de la literatura sobreestiman este parámetro hidrodinámico. Por ello, se han realizado ensayos con este novedoso dispositivo para estudiar la hidrodinámica y la influencia que tienen los factores geométricos y operativos sobre la velocidad mínima de spouting en spouted bed cónicos de fuente confinada, con y sin tubos centrales. Los lechos están formados por arena fina y partículas de aserrín. A partir de un diseño experimental se pudo comprobar que, aunque ciertos factores influyen en determinadas configuraciones, los de mayor influencia en todas las configuraciones son las propiedades del sólido, la altura del lecho estático y el diámetro de entrada del gas. Por lo tanto, se han propuesto nuevas correlaciones para predecir la velocidad mínima de spouting en cada configuración., [EN] A novel internal device called fountain confiner has been developed, which stabilizes the system and allows operating with fine particles, even without any type of draft tube. Given the stability this device confers upon the system, lower minimum spouting velocities than in conventional systems are required, and therefore the correlations in the literature overestimate this hydrodynamic parameter. Accordingly, runs have been carried out using this novel device in order to study the hydrodynamics and the influence geometric and operating factors have on the minimum spouting velocity in fountain confined conical spouted beds, with and without draft tubes. The beds are made up of fine sand and sawdust particles. Based on an experimental design, it was ascertained that, although certain factors are influential in given configurations, those of greater influence in all the configurations are the solid properties, static bed height and gas inlet diameter. Therefore, new correla- tions have been proposed for predicting the minimum spouting velocity in each configuration., Este trabajo ha recibido financiación del Ministerio de Economía y Competitividad de España (CTQ2016-75535-R y PID2019-107357RB-I00 (AEI/FEDER, UE)) y de la Comisión Europea (HORIZON H2020- MSCA RISE-2018. Contrato nº: 823745 ). M. Tellabide agradece al Ministerio de Educación, Cultura y Deporte de España su beca de doctorado (FPU14/ 05814). I. Estiati agradece a la Universidad del País Vasco su beca de posgrado (ESPDOC18/14).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Co-cracking of high-density polyethylene (HDPE) and vacuum gasoil (VGO) under refinery conditions

  • Rodríguez, Elena
  • Gutiérrez Lorenzo, Alazne
  • Palos Urrutia, Roberto
  • Vela Díaz, Francisco Javier
  • Azkoiti Elustondo, Miren Josune
  • Arandes Esteban, José María
  • Bilbao Elorriaga, Javier
The co–cracking of a 5 wt% of high–density polyethylene (HDPE) dissolved in vacuum gasoil (VGO) under conditions similar to those of the industrial fluid catalytic cracking (FCC) unit has been studied. The main goal has been to assess the effect of the co–feeding of waste plastic on attained conversion, as well as on the yield and composition of the products, given its interest for the subsequent refinery processes focused on the production of fuels. The products have been grouped in fractions: dry gas (C1-C2); liquefied petroleum gas (C3-C4), naphtha (C5-C12), light cycle oil (C13−C20), heavy cycle oil (C20+) and coke. Obtained results expose a significant synergy in the co–cracking, obtaining with the HDPE/VGO blend a higher conversion at 560 °C, together with higher yield of naphtha and concentration of light olefins. The synergy is based on the fast formation of intermediate alkylcarbenium ions at high temperature. Naphtha has been extensively characterized obtaining higher contents of n–paraffins and olefins and lower of iso–paraffins and aromatics in the cracking of the HDPE/VGO blend. This last characteristic increases the interest of the naphtha obtained in the co–cracking to be included in the gasoline pool of the refinery., This work has been carried out with financial support of the Ministry of Science, Innovation and Universities (MICINN) of the Spanish Government (grant RTI2018-096981-B-I00), the Basque Government (grant IT1218-19), the European Union’s ERDF funds and the European Commission (HORIZON H2020-MSCA RISE-2018. Contract No. 823745). The authors also acknowledge Petronor Refinery for providing the VGO and the catalyst used in this work.