Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced electrochemical hydrogenation of benzaldehyde to benzyl alcohol on Pd@Ni-MOF by modifying the adsorption configuration

  • Gong, Li
  • Zhang, Chao Yue
  • Li, Junshan
  • Montaña-Mora, Guillem
  • Botifoll, Marc
  • Guo, Tiezhu
  • Arbiol, Jordi
  • Zhou, Jin Yuan
  • Kallio, Tanja
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
Electrocatalytic hydrogenation (ECH) approaches under ambient temperature and pressure offer significant potential advantages over thermal hydrogenation processes but require highly active and efficient hydrogenation electrocatalysts. The performance of such hydrogenation electrocatalysts strongly depends not only on the active phase but also on the architecture and surface chemistry of the support material. Herein, Pd nanoparticles supported on a nickel metal-organic framework (MOF), Ni-MOF-74, are prepared, and their activity toward the ECH of benzaldehyde (BZH) in a 3 M acetate (pH 5.2) aqueous electrolyte is explored. An outstanding ECH rate up to 283 μmol cm-2 h-1 with a Faradaic efficiency (FE) of 76% is reached. Besides, higher FEs of up to 96% are achieved using a step-function voltage. Materials Studio and density functional theory calculations show these outstanding performances to be associated with the Ni-MOF support that promotes H-bond formation, facilitates water desorption, and induces favorable tilted BZH adsorption on the surface of the Pd nanoparticles. In this configuration, BZH is bonded to the Pd surface by the carbonyl group rather than through the aromatic ring, thus reducing the energy barriers of the elemental reaction steps and increasing the overall reaction efficiency., L.G. and C.Y.Z. thank the China Scholarship Council for the scholarship support. This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). This work was supported by the Innovation Fund for Small and Medium-Sized Enterprises in Gansu Province (no. 22CX3JA006) and Lanzhou Talent Innovation and Entrepreneurship Project (no. 2022-2-81) and partially by the Fundamental Research Funds for the Central Universities (grant nos. lzujbky-2021-it33). The authors greatly acknowledge the support of the Supercomputing Center of Lanzhou University, China. J.L. is grateful for the project supported by the Natural Science Foundation of Sichuan Province (2022NSFSC1229). The authors also greatly thank for the generous help from Liming Deng and Professor Dr. Shengjie Peng (College of Materials Science and Technology Nanjing University of Aeronautics and Astronautics Nanjing 210016, China). The project on which these results are based has received funding from the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement no. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIÓ). The authors acknowledge funding from Generalitat de Catalunya 2021SGR00457 and 2021SGR01581. ICN2 acknowledges funding from project PID2020-116093RB-C43, funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (grant no. CEX2021-001214-S). ICN2 and IREC are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autónoma de Barcelona Materials Science PhD program. M.B. acknowledges support from SUR Generalitat de Catalunya and the EU Social Fund; project ref 2020 FI 00103., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Semiconductor nanosheets for electrocatalytic self-coupling of benzaldehyde to hydrobenzoin

  • Gong, Li
  • Zhang, Chao Yue
  • Mu, Xiao
  • Han, Xu
  • Li, Junshan
  • Arbiol, Jordi
  • Zhou, Jin Yuan
  • Kallio, Tanja
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
The electrochemical reduction of biomass-derived feedstocks provides a sustainable platform for the synthesis of a wide range of chemical commodities and biofuels. Despite their interest, the optimization of reaction conditions, the screening of electrode materials, and the mechanistic understanding of these processes lag well behind other chemical routes. Here, we focus on the electrochemical self-coupling of benzaldehyde (BZH) to hydrobenzoin (HDB) using semiconductor electrocatalysts with nanosheet morphologies. By testing several semiconductor materials, a correlation is observed between their band gap and the electrochemical potential necessary to maximize selectivity towards HDB in alkaline medium, which we associate with the charge accumulation at the semiconductor surface. N-type CuInS2 provides the highest conversion rate at 0.3 mmol cm−2h−1 with a selectivity of 98.5 % at −1.3 V vs. Hg/HgO. Additional density functional theory calculations demonstrate a lower kinetic energy barrier at the CuInS2 surface compared with graphitic carbon, proving its catalytic role in the self-coupling reaction of BZH., L. Gong and C.Y. Zhang thank the China Scholarship Council for the scholarship support. The authors greatly acknowledge the computational simulation support from the Supercomputing Center of Lanzhou University, China. J. Li is grateful for the project funded by the Natural Science Foundation of Sichuan Province (No. 2022NSFSC1229) and the China Postdoctoral Science Foundation (No.2023MD734228). The project on which these results are based has received funding from the European Union's Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIO). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. This research is part of the CSIC program for the Spanish Recovery, Transformation, and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN /AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

First-Principles Nanocapacitor Simulations of the Optical Dielectric Constant in Water Ice

  • Mannino, Anthony
  • Arvelos, Graciele M.
  • Kaushik, Kedarsh
  • Artacho, Emilio
  • Ordejón, Pablo
  • Rocha, Alexandre R.
  • Pedroza, Luana S.
  • Fernández Serra, Mariví
We introduce a combined density functional theory and nonequilibrium Green's function framework to compute the capacitance of nanocapacitors and directly extract the dielectric response of a subnanometer dielectric under bias. We identify that at the nanoscale conventional capacitance evaluations based on stored charge per unit voltage suffer from an ill-posed partitioning of electrode and dielectric charge. This partitioning directly impacts the geometric definition of capacitance through the capacitor width, which in turn makes the evaluation of dielectric response uncertain. This ambiguous separation further induces spurious interfacial polarizability when analyzed via maximally localized Wannier functions. Focusing on crystalline ice, we develop a robust charge-separation protocol that yields unique capacitance-derived polarizability and dielectric constants, unequivocally demonstrating that confinement alters neither ice's intrinsic electronic response nor its insensitivity to proton order. Our results lay the groundwork for rigorous interpretation of capacitor measurements in low-dimensional dielectric materials., M. F.-S. and A. M. were funded by the National Science Foundation Award No. DMR-2427902. A. M. thanks the Institute for Advanced Computational Science (IACS) at Stony Brook University (SBU) for support through a graduate fellowship. The authors would like to thank Stony Brook Research Computing and Cyberinfrastructure and IACS at SBU for access to the high-performance SeaWulf computing system, funded by the National Science Foundation (Awards No. 1531492 and No. 2215987) and matching funds from the Empire State Development’s Division of Science, Technology and Innovation (NYSTAR) program (Contract No. C210148). L. S. P., G. M. A., and A. R. R. would like to acknowledge financial support from Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP Grants No. 2017/10292-0, No. 2020/16593-4, and No. 2023/09820-2), Conselho Nacional de Pesquisa (CNPq), and CAPES. Some Calculations were carried out at CENAPAD-SP and at the Santos Dumont High performance facilities of Laboratorio Nacional de Computação Científica (LNCC), Brazil. E. A. was supported by the European Commission Horizon MSCA-SE Project MAMBA (Grant No. 101131245), the Spanish MCIN/AEI/10.13039/501100011033 (Grant No. PID2022-139776NB-C65), a María de Maeztu award to Nanogune (Grant No. CEX2020-001038-M), the United Kingdom’s EPSRC (Grant No. EP/V062654/1), and the Basque Ikur HPC program, through a 2023 Cotutelage grant. P. O. was supported by the Spanish MCIN/AEI/10.13039/501100011033 (Grants No. PID2022-139776NB-C62 and No. PCI2022-134972-2) and by a Severo Ochoa award to ICN2 (Grant No. CEX2021-001214-S) and the EU-H2020 MaX “Materials Design at the Exascale” CoE (Grant No. 101093374)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2020-001038-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Real-Time Out-of-Equilibrium Quantum Dynamics in Disordered Materials

  • Canonico, Luis M.
  • Roche, Stephan
  • Cummings, Aron W.
We report a linear-scaling numerical method for exploring nonequilibrium electron dynamics in systems of arbitrary complexity. Based on the Chebyshev expansion of the time evolution of the single-particle density matrix, the method gives access to nonperturbative excitation and relaxation phenomena in models of disordered materials with sizes on the experimental scale. After validating the method by applying it to saturable optical absorption in clean graphene, we uncover that disorder can enhance absorption in graphene and that the interplay between light, anisotropy, and disorder in nanoporous graphene might be appealing for sensing applications. Beyond the optical properties of graphenelike materials, the method can be applied to a wide range of large-area materials and systems with arbitrary descriptions of defects and disorder., L. M. C. acknowledges funding from the Ministerio de Ciencia e Innovación de España under Grants No. PID2019–106684 GB-I00/AEI/10.13039/501100011033, No. FJC2021-047300-I, financed by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU/Plan de Recuperación, Transformación y Resiliencia.” L. M. C. and A. W. C. acknowledge funding from the U.S. Army Research Office under Grant No. W911NF-21-1-0004. We acknowledge funding from Ministerio de Ciencia e Innovación under Grant No. PID2019–106684 GB-I00 financed by MCIN/AEI/10.13039/501100011033 and Grant No. PID2022-138283NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU.” ICN2 is funded by the CERCA Programme/Generalitat de Catalunya, 2021 SGR 00997 and supported by the Severo Ochoa Centres of Excellence programme, Grant No. CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Is complete reconstruction of zigzag graphene edge possible? Kinetics of formation and annihilation of residual topological defects

  • Polynskaya, Yulia G.
  • Lebedeva, Irina
  • Knizhnik, Andrey A.
  • Popov, Andrey M.
  • Vyrko, Sergey A.
  • Poklonski, Nikolai A.
In Press., The raw data required to reproduce these findings and kinetic model are available to download from https://doi.org/10.5281/zenodo.18700786 and https://doi.org/10.5281/zenodo.18755409, respectively., Ab initio calculations are performed to investigate the reconstruction of zigzag graphene edges beyond the initial nucleation of a 57 pair and growth of reconstructed edge domains composed of 57 pairs. We calculate the energetic profiles for the final steps of domain coalescence, which result in the formation of residual topological defects serving as domain boundaries. The energy barriers for these steps range from 0.8 to 1.6 eV, indicating that they do not limit the rate of the overall reconstruction process. 7557 defect with neighboring pentagons is found to be energetically unfavourable and prone to the inclusion of a hexagon pair between the pentagons. Possible atomistic pathways for diffusion of the residual defects are proposed and analyzed, with calculated barriers ranging from 1.3 to 2.2 eV. The most mobile defect is identified as a hexagon separating two domains with the same 57 pair orientation (57657). Among defects separating domains with different orientations, those with proximal pentagons (7557 and 75657) exhibit significantly higher mobility than those with adjacent heptagons (5775 and 57675). Furthermore, defects containing a hexagon between domains (57675 and 75657) are found to be less mobile than their counterparts (5775 and 7557). Based on these results and kinetic modeling, we predict the temperature-dependent lifetimes of residual defects prior to their annihilation. Our results demonstrate that complete reconstruction of the zigzag edge is feasible at temperatures above 600 K. Analytical estimates are derived to explain the time and length scales governing the entire reconstruction process., Y.G.P. and A.M.P. acknowledge the support by the Russian Science Foundation grant No. 23-42-10010, https://rscf.ru/en/project/23-42-10010/. A.M.P. acknowledges the support by project FFUU-2024-0003 of the Institute of Spectroscopy of the Russian Academy of Sciences, Russia for the results described in Section 3. S.A.V. and N.A.P. acknowledge support by the Belarusian National Research Program “Convergence-2030”. IL acknowledges support from the EuroHPC JU under the MAX (Materials design at the Exascale) project (grant no. 101093374), and from the Spanish MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR through grant no. PCI2022-134972-2. ICN2 is supported by the CERCA programme (Generalitat de Catalunya) and the Severo Ochoa Centres of Excellence programme (grant no. CEX2021-001214-S), funded by MCIN/AEI/10.13039/501100011033 ., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed