Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Electrostatic interaction between SARS-CoV-2 and charged surfaces: Spike protein evolution changed the game

  • Domingo, Marc
  • Guzmán, Horacio
  • Kanduc, Matej
  • Faraudo, Jordi
Previous works show a key role of electrostatics for the SARS-CoV-2 virus in aspects such as virus-cell interactions or virus inactivation by ionic surfactants. Electrostatic interactions depend strongly on the variant since the charge of the Spike protein (responsible for virus - environment interactions) evolved across the variants from the highly negative Wild Type (WT) to the highly positive Omicron variant. The distribution of the charge also evolved from diffuse to highly localized. These facts suggest that SARS-CoV-2 should interact strongly with charged surfaces in a way that changed during the virus evolution. This question is studied here by computing the electrostatic interaction between WT, Delta and Omicron Spike proteins with charged surfaces using a new method (based on Debye-Huckel theory) that provides efficiently general results as a function of the surface charge density σ. We found that the interaction of the WT and Delta variant spikes with charged surfaces is dominated by repulsive image forces proportional to σ2 originated at the protein/water interface. On the contrary, the Omicron variant shows a distinct behaviour, being strongly attracted to negatively charged surfaces and repelled from positively charged ones. Therefore, the SARS-CoV-2 virus has evolved from being repelled by charged surfaces to being efficiently adsorbing to negatively charged ones., This work was supported by Grant No. PID2021-124297NB-C33 funded by MICIU/AEI/ 10.13039/501100011033, the “Severo Ochoa” Grant No. CEX2023-001263-S for Centers of Excellence awarded to ICMAB, and the FPI under Grant No. PRE2020-093689 awarded to M.D.We also thank the Government of Catalonia (AGAUR) under Grant No. 2021SGR01519. H.V.G. acknowledges financial support from the Maria Zambrano Grant No. CA6/RSUE/2022- 00108 and Ramon y Cajal grant No. RYC2022-038082-I. M.K. acknowledges financial support from the Slovenian Research and Innovation Agency ARIS (contracts P1-0055 and J1-4382). We thank the CESGA supercomputing center for computer time and technical support at the Finisterrae supercomputer. We thank Dr. Fiona L. Kearns (UCSD) for discussions regarding the spike protein structures. M.D. is enrolled in the Material Sciences Ph.D. program of the Universitat Aut`onoma de Barcelona., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Giant Photocaloric Effects across a Vast Temperature Range in Ferroelectric Perovskites

  • Rurali, Riccardo
  • Escorihuela Sayalero, Carlos
  • Tamarit, Josep Lluís
  • Íñiguez, Jorge
  • Cazorla, Claudio
Solid-state cooling presents an energy-efficient and environmentally friendly alternative to traditional refrigeration technologies that rely on thermodynamic cycles involving greenhouse gases. However, conventional caloric effects face several challenges that impede their practical application in refrigeration devices. First, operational temperature conditions must align closely with zero-field phase-transition points; otherwise, the required driving fields become excessively large. However, phase transitions occur infrequently near room temperature. Additionally, caloric effects typically exhibit strong temperature dependence and are sizable only within relatively narrow temperature ranges. In this Letter, we employ first-principles simulation methods to demonstrate that light-driven phase transitions in polar oxide perovskites have the potential to overcome such limitations. Specifically, for the prototypical ferroelectric KNbO_{3} we illustrate the existence of giant "photocaloric" effects induced by light absorption (ΔS_{PC}∼100  J K^{-1} kg^{-1} and ΔT_{PC}∼10  K) across a vast temperature range of several hundred Kelvin, encompassing room temperature. These findings are expected to be generalizable to other materials exhibiting similar polar behavior., We acknowledge financial support by the Spanish Ministry of Science under the Grants No. PID2020–119777 GB-I00, No. TED2021-130265BC22, No. PID2020–112975 GB-I00, No. RYC2018024947-I and by the Generalitat de Catalunya under the Grants No. 2021SGR-00343 and No. 2021SGR-01519. This work is part of the Severo Ochoa Excellence Programme (CEX2023-001263-S). Computational support was provided by the Red Española de Supercomputación under the Grants No. FI-2023-2-0004, No. FI-2023-30043, and No. FI-2024-1-0005. This work is part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI/10.13039/ 501100011033. Work at LIST was supported by the Luxembourg National Research Fund through Grant No. C21/MS/15799044/FERRODYNAMICS., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unidirectional magnetoresistance goes perpendicular

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Los sabios ciegos y los materiales avanzados

  • Martín Jiménez, Daniel
La nanotecnología posibilita la creación de nuevos materiales funcionales que son aplicados en los campos de las comunicaciones, la energía y la salud. Para tener una comprensión más precisa de las propiedades de estos materiales avanzados, es necesario emplear diversas metodologías que permitan caracterizarlos de forma integral. El proyecto InCAEM tiene como objetivo crear una plataforma única en España para una caracterización avanzada multitécnica y correlativa de materiales, con radiación sincrotrón, métodos computacionales, microscopías electrónicas y de sondas de barrido dentro de las instalaciones del sincrotrón ALBA. Esta plataforma estará disponible para cualquier usuario en 2026 a través de propuestas enviadas a la oficina de usuarios de ALBA., Martín Jiménez agradece a la Prof. Carmen Ocal por su ayuda desde su regreso a España en 2023 y su incorporación en la plataforma de microscopia de sonda local del proyecto InCAEM, a la Dr. Esther Barrena por las sugerencias para la mejora de una versión preliminar de este artículo y a Ana Belén Martínez Bonillo y Lucia Aballe por una revisión final. El autor también agradece la financiación al programa HORIZON-MSCA-PF de la Comisión Europea mediante el proyecto TORNADE (Grant Agreement No. 101106103) y al proyecto InCAEM (In-situ Correlative Facility for Advanced Energy Materials) financiado dentro del Programa de Fondos Complementarios de Materiales Avanzados (Next Generation EU PRTR-C17.I1) en el marco del Plan de Recuperación, Transformación y Resiliencia (PRTR) del gobierno de España y la Generalitat de Catalunya., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

WorMe: A user-oriented software for Caenorhabditis elegans length determination

  • Llobet Lladó, Josep
  • Garriga Alonso, Núria
  • Muñoz Juan, Amanda
  • Laromaine, Anna
Caenorhabditis elegans is a widely used animal model for biomedicl research. The lenght of this nematode is commonly used to asses its evelopment and its health. Typically, measurements are performed manually; however, software has been developed to automate this process. Most of these tools are designed for stereomicroscope images, and none work reliably for compound microscopy images. Here we present WorMe, a user-friendly software that measures C.elegans length in compound microscopy images. The program is versatile in handling various image types and can be analyse multiple images collectively. Funthermore, the user can accept of discard the detected objects, separate joined worms, correct erroneous measurements, and manually add new worms. The length results are presented in a spreadsheet file, with earch measurement linked to its image. Graphic data can also be exported., The work has been supported partially with RTI2018-096273B-I00, PID2024-1576370B-I00 (BACTIVE), PDC2023-145826-I00 (BIOCCHIP), funded by MCIN/AEI//10.13039/501100011033/FEDER “Una manera de hacer Europa”; the “Severo Ochoa” Programme for Centres of Excellence, in R&D CEX2019-000917-S (FUNFUTURE), CEX2023-001263-S (MATRANS42); the Generalitat de Catalunya (2021SGR00446 Grant), and European Union’s Horizon Europe research and innovation program under grant agreement No 101057527 (NextGEM). AL participates in CSIC-Conexion Nanomedicina del CSIC, EPNOE network, and Red Nanocare 2.0, Grant RED2022-134560-T funded by MCIN/AEI/10.13039/501100011033, JLL acknowledges ayudas JAE ICU, Consejo Superior de Investigaciones Científicas (CSIC), JAEICU-21-ICMAB01 (2021) in the framework of the Master of Bioinformatics and Biostatistics (UOC, 2021), NGA acknowledges ayudas JAEIntro, Consejo Superior de Investigaciones Científicas (CSIC), JAEINT-24-01745, (2024), AMJ acknowledges the Ph.D. scholarship (FPU18/05190)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of Quinoxaline Units in Random Terpolymers on Enhancing Indoor Organic Photovoltaics: Lowering HOMO Level and Improving Miscibility

  • Choi, Huijeong
  • Lee, Gyeong Min
  • Kang, Junmo
  • Saeed, Muhammad Ahsan
  • Ham, Gayoung
  • Ahn, Hyungju
  • Hwang, Jun Ho
  • Lee, Dongchan
  • Cho, Shinuk
  • Lee, Eunji
  • Cha, Hyojung
  • Shim, Jae Won
  • Kim, BongSoo
The rapid growth in demand for the Internet of Things (IoT) has increased the need for power sources capable of harvesting energy from indoor light sources. Indoor organic photovoltaics (IOPVs) have emerged as promising candidates due to their ability to effectively harness indoor light. However, efficient polymer donors tailored for indoor conditions remain rare, as most high-performance photoactive materials have been developed primarily for outdoor environments. Here, a series of PM6-derived terpolymers, PB2FQxn (n = 5, 10, 15, and 20) is presented, incorporating a quinoxaline-based electron-accepting monomer 2,3-bis(5-(2-ethylhexyl)-4-fluorothiophen-2-yl)-6,7-difluoroquinoxaline (B2FQx) as a third component. Introducing the B2FQx monomeric unit into the polymer backbone enables favorable fine-tuning of the optical, electrochemical, and molecular packing properties. In particular, when blended with L8-BO, PB2FQx15-based devices achieve remarkable power conversion efficiencies exceeding 30% under both light-emitting diode (LED) 1000 lx and fluorescent lamp (FL) 1000 lx illumination. This impressive performance is attributed to the deep-lying highest occupied molecular orbital (HOMO) energy level of PB2FQx15 and its optimal miscibility with L8-BO. Overall, it is demonstrated that the design of terpolymers incorporating the combination of two electron-accepting units paves the way to enhance the photovoltaic properties of IOPVs., H.C. and G.M.L. contributed equally to this work. This work was supported by the National R&D Program through the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (RS-2022-NR070314, RS-2023-NR077279, RS-2025-00512708, and RS-2023-00213920). Experiments at PLS-II 9A U-SAXS and 6D UNIST-PAL Beamlines were supported in part by UNIST UCRF and Pohang Accelerator Laboratory., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solid-State Oxide-Ion Synaptic Transistor for Neuromorphic Computing

  • Langner, Philipp
  • Chiabrera, Francesco
  • Alayo, Nerea
  • Nizet, Paul
  • Morrone, Luigi
  • Bozal-Ginesta, Carlota
  • Morata, Alex
  • Tarancón, Albert
Neuromorphic hardware facilitates rapid and energy-efficient training and operation of neural network models for artificial intelligence. However, existing analog in-memory computing devices, like memristors, continue to face significant challenges that impede their commercialization. These challenges include high variability due to their stochastic nature. Microfabricated electrochemical synapses offer a promising approach by functioning as an analog programmable resistor based on deterministic ion-insertion mechanisms. Here, an all-solid-state oxide-ion synaptic transistor is developed, employing Bi2V0.9Cu0.1O5.35 as a superior oxide-ion conductor electrolyte and La0.5Sr0.5FeO3-δ as a variable-resistance channel able to efficiently operate at temperatures compatible with conventional electronics. This transistor exhibits essential synaptic behaviors such as long- and short-term potentiation, paired-pulse facilitation, and post-tetanic potentiation, mimicking fundamental properties of biological neural networks. Key criteria for efficient neuromorphic computing are satisfied, including excellent linear and symmetric synaptic plasticity, low energy consumption per programming pulse, and high endurance with minimal cycle-to-cycle variation. Integrated into an artificial neural network (ANN) simulation for handwritten digit recognition, the presented synaptic transistor achieved a 96% accuracy on the Modified National Institute of Standards and Technology (MNIST) dataset, illustrating the effective implementation of the device in ANNs. These findings demonstrate the potential of oxide-ion based synaptic transistors for effective implementation in analog neuromorphic computing based on iontronics., This project received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101066321 (TRANSIONICS) and under the Marie Skłodowska-Curie Actions Postdoctoral Fellowship grant (101107093). The authors acknowledge support from the Generalitat de Catalunya (2021-SGR-00750, NANOEN). C.B.G. acknowledges funding from a Marie Skłodowska Curie Actions Postdoctoral Fellowship grant (101064374)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silica-coated gold nanorods conjugated with CRANAD to improve the detection of soluble β-amyloid species via a surface-enhanced fluorescence effect

  • Oyarzún, María Paz
  • Cabrera, Pablo
  • Parra Muñoz, Nicole
  • López Monsalves, Valentina
  • Riveros, Ana Luisa
  • Celis, Freddy
  • Gimeno Muñoz, Raquel
  • González Campo, Arántzazu
  • Aliaga Alcalde, Núria
  • Soler, Mónica
  • Kogan, Marcelo J.
Alzheimer's disease (AD), one of the most common neurodegenerative disorders among the elderly, poses significant challenges due to limited therapeutic options and diagnostic complexity. The soluble and insoluble forms of β-amyloid (Aβ) peptide serve as disease biomarkers present in the early stages of the disease, highlighting the importance of developing detection methodologies. We designed a nanosystem utilizing silica-coated plasmonic nanoparticles linked to a CRANAD probe (AuNRs@SiO2-CR2), which shows an improved fluorescence signal for the detection of Aβ through a surface enhancement effect. Our study identified an optimal thickness of the silica layer that results in enhanced fluorescence intensity. Furthermore, we observed a notable preferential detection towards the more toxic soluble Aβ species. In comparison to the free CRANAD, we achieved an approximately 800-fold increase in fluorescence signal, hence facilitating an improvement of the sensitivity for the detection of the Aβ aggregates. The designed nanomaterials will enhance the detection of soluble Aβ aggregates, which is crucial for the early diagnosis of Alzheimer´s disease., M. Oyarzun acknowledges financial support from ANID Postdoctoral Project 3180651 and P. Cabrera acknowledges financial support from ANID National PhD Scholarship 21200617. N. Parra acknowledges financial support from ANID Postdoctoral Project 3200610 and Fondecyt Iniciación N° 11240966. M. Soler and N. Parra acknowledge the Project Anillo ANID/ACT210059. M. Soler acknowledges Project ANID Fondecyt 1201962. M. Soler and M. Kogan recognize Project ANID Fondecyt 1211482, MK recognizes Project Fondecyt 1251140 and Projects Fondap 15130011 and 1523A0008. N. Aliaga-Alcalde and A. González-Campo thank the project PID2023-151929NB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. The CSIC authors acknowledge the financial support from the Spanish Ministry of Science, through the ‘‘Severo Ochoa’’ Programme for Centres of Excellence (MATRANS42, CEX2023–001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Abinit 2025: New capabilities for the predictive modeling of solids and nanomaterials

  • Verstraete, Matthieu J.
  • Abreu, Joao
  • Allemand, Guillaume E.
  • Amadon, Bernard
  • Antonius, Gabriel
  • Azizi, Maryam
  • Baguet, Lucas
  • Barat, Clémentine
  • Bastogne, Louis
  • Béjaud, Romuald
  • Beuken, Jean-Michel
  • Bieder, Jordan
  • Blanchet, Augustin
  • Bottin, Francois
  • Bouchet, Johann
  • Bouquiaux, Julien
  • Bousquet, Eric
  • Boust, James
  • Brieuc, Fabien
  • Brousseau-Couture, Véronique
  • Brouwer, Nils
  • Bruneval, Fabien
  • Castellano, Aloïs
  • Castiel, Emmanuel
  • Charraud, Jean-Baptiste
  • Clérouin, Jean
  • Côté, Michel
  • Duval, Clément
  • Gallo, Alejandro
  • Gendron, Frederic
  • Geneste, Gregory
  • Ghosez, Philippe
  • Giantomassi, Matteo
  • Gingras, Olivier
  • Gómez-Ortiz, Fernando
  • Gonze, Xavier
  • Goudreault, Félix Antoine
  • Grüneis, Andreas
  • Gupta, Raveena
  • Guster, Bogdan
  • Hamann, Donald R
  • He, Xu
  • Hellman, Olle
  • Holzwarth, Natalie
  • Jollet, Francois
  • Kestener, Pierre
  • Lygatsika, Ioanna-Maria
  • Nadeau, Olivier
  • MacEnulty, Lórien
  • Marazzi, Enrico
  • Mignolet, Maxime
  • O'Regan, David D
  • Outerovitch, Robinson
  • Paillard, Charles
  • Petretto, Guido
  • Poncé, Samuel
  • Ricci, Francesco
  • Rignanese, Gian-Marco
  • Rodriguez-Mayorga, Mauricio
  • Romero, Aldo H
  • Rostami, Samare
  • Royo, Miquel
  • Sarraute, Marc
  • Sasani, Alireza
  • Soubiran, François
  • Stengel, Massimiliano
  • Tantardini, Christian
  • Torrent, Marc
  • Trinquet, Victor
  • Vasilchenko, Vasilii
  • Waroquiers, David
  • Zabalo, Asier
  • Zadoks, Austin
  • Zhang, Huazhang
  • Zwanziger, Josef
Abinit is a widely used scientific software package implementing density functional theory and many related functionalities for excited states and response properties. This paper presents the novel features and capabilities, both technical and scientific, which have been implemented over the past 5 years. This evolution occurred in the context of evolving hardware platforms, high-throughput calculation campaigns, and the growing use of machine learning to predict properties based on databases of first-principle results. We present new methodologies for ground states with constrained charge, spin, or temperature; for density functional perturbation theory extensions to flexoelectricity and polarons; and for excited states in many-body frameworks including GW, dynamical mean field theory, and coupled cluster. Technical advances have extended Abinit high-performance execution to graphical processing units and intensive parallelism. Second-principles methods build effective models on top of first-principle results to scale up in length and time scales. Finally, workflows have been developed in different community frameworks to automate Abinit calculations and enable users to simulate hundreds or thousands of materials in controlled and reproducible conditions., This work was supported by many funding agencies and grants. We acknowledge support from the Fonds de la Recherche Scientifique (FRS-FNRS Belgium) through the PdR under Grant No. T.0103.19 - ALPS. This work was an outcome of the Shapeable 2D magnetoelectronics by design project (SHAPEme, EOS Project No. 560400077525) that received funding from the FWO and FRS-FNRS under the Belgian Excellence of Science (EOS) program. This work was supported by the Communauté française de Belgique through the SURFASCOPE project (Grant No. ARC 19/24-102). S.P. is a Research Associate of the Fonds de la Recherche Scientifique - FNRS. This work was supported by the Fonds de la Recherche Scientifique - FNRS under Grant Nos. T.0183.23 (PDR) and T.W011.23 (PDR-WEAVE). This publication was supported by the Walloon Region in the strategic axe FRFS-WEL-T. The Flatiron Institute is a division of the Simons Foundation. L.M. and D.D.O.’R. acknowledge the support from Trinity College, Dublin, through its Provost’s Ph.D. Project Awards and School of Physics. F.G.-O. acknowledges financial support from MSCA-PF under Grant No. 101148906 funded by the European Union and the Fonds de la Recherche Scientifique (FNRS) through the FNRS-CR under Grant No. 1.B.227.25F. M.R.-M., M.T., and F.B. acknowledge the Cross-Disciplinary Program on Numerical Simulation of the French Alternative Energies and Atomic Energy Commission (CEA) for funding the ABIDM project. This work was supported by the European Union’s Horizon 2020 research and innovation program under grant Agreement No. 964931 (TSAR) and by F.R.S.-FNRS Belgium under PDR Grant Nos. T.0107.20 (PROMOSPAN) and T.0128.25 (TOPOTEX). This work was supported by the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 951786 (NOMAD CoE). The authors acknowledge extensive access to computing time for testing and scaling on the following platforms: the Consortium d’Equipements de Calcul Intensif (CECI funded by FRS-FNRS Belgium Grant No. 2.5020.11); the Lucia Tier-1 of the Fédération Wallonie-Bruxelles (Walloon Region grant Agreement No. 1117545). F.R. acknowledges support for funding from the BEWARE scheme of the Wallonia-Brussels Federation under the European Commission's Marie Curie-Skłodowska Action (COFUND 847587). M.S. and M.R. acknowledge support by the Spanish MCIN/AEI/10.13039/501100011033 through Grant No. PID2023-152710NB-I00 and a Severo Ochoa Excellence award to ICMAB, Grant No. CEX2023-001263-S, as well as by the Generalitat de Catalunya through Grant No. 2021 SGR 01519. Support for the West Virginia group came from West Virginia High Education Policy Commission under the call Research Challenge Grand Program 2022, Award No. RCG 23-007., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bio-Inspired Toluene Oxidation Electrocatalysis by a Carbon-Nanotube-Supported Dicopper(II, II) Complex

  • Gunther, Mathis
  • Tovar, Jonathan de
  • Olivotto, Léonard
  • Miere, Alexandre
  • Philouze, Christian
  • Belle, Catherine
  • Le Goff, Alan
  • Thibon-Pourret, Aurore
A novel dicopper(II, II) complex (Cpyrene) was attached on multi-walled carbon nanotube (MWCNT) electrodes resulting in a nanohybrid electrode (MWCNT@Cpyrene) able to partially oxidize toluene to benzaldehyde and benzyl alcohol with 300 and 409 TON h-1, respectively, in 1,2-difluorobenzene. Exchanging the solvent by acetonitrile leads to the additional N-benzylacetamide formation from the C-N coupling of toluene and in situ solvent oxidation with 313 TON h-1 at room temperature., This work was supported by the French Agence Nationale de la Recherche (ANR-22-CE07-0032). The authors are grateful to ICMG UAR 2607 for the analytical facilities (NMR, ESI-MS, EPR and X-Ray diffraction). This work has been partially supported by CBH-EUR-GS (ANR-17-EURE-0003) and Labex ARCANE (ANR-11-LABX-0003-01) programs. Dr Florian Molton, Dr Julien Pérard and Rodolphe Gueret are acknowledged for EPR, ICP and HR-ESI-MS analyses, respectively. Sultan Abu A. Aeash, Antonin Caron and Paul Ferrigno are acknowledged for their assistance in synthesis. We kindly acknowledge Dr Nicolas Le Poul, Dr Marius Réglier and Dr Jalila Simaan for fruitful discussions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed