Skip to main content

NANOCOMPOSITES MAGNETICOS PARA APLICACIONES EN ENERGIA Y SENSORES

MAT2015-65295-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 1
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Flexible, multifunctional nanoribbon arrays of palladium nanoparticles for transparent conduction and hydrogen detection

  • Sánchez, E.H.
  • Normile, P.S.
  • De Toro, J.A.
  • Caballero, Rubén
  • Canales-Vázquez, Jesús
  • Rebollar, Esther
  • Castillejo, Marta
  • Colino, J.M.
A novel combination of nanostructuring techniques is undertaken to obtain a multifunctional material system consisting of planar arrays of nanoribbons of Pd nanoparticles (NPs) on polyethylene terephthalate (PET) substrates. The first stage was to prepare a laser-induced periodic surface structure (LIPSS) on the PET substrate, which electron microscopy revealed to be a large area, high coherence nanoripple pattern with spacing of (204 ± 1) nm and amplitude of (46 ± 9) nm. The second stage comprised NP (diameter 5 nm) deposition by orientating the nanostructured substrate to a Pd NP beam from a sputter gas phase aggregation source such that the substrate was partially shadowed by the ripple pattern (the incident angle with respect to the normal of the PET substrate was varied between 60 and 75°). This resulted in the formation of an array of NP ribbons (thickness ∼ 20 nm) on the ripple ridges, the mean ribbon width depending on the deposition incidence angle, thus confirming the shadowing effect. These planar arrays were studied as candidates for both flexible, transparent conductors and hydrogen sensors. Analysis of optical transmittance indicates that a mean inter-ribbon gap of above 100 nm is required in order to improve the average transmittance beyond 80%. Four-probe electrical resistance measurements show these nanoribbon arrays to be electrically anisotropic structures whose sheet resistance is understood to be governed by the contact resistance between NPs. An additional functionality is proven for the fabricated substrates: reversible detection of hydrogen at a partial pressure above ∼60 ppm, with good electrical sensitivity in the dilute (α-hydride) regime., Peer Reviewed