Skip to main content

APLICANDO MXENOS COMO CATALIZADORES DEFINITIVOS PARA LA PRODUCCION DE COMBUSTIBLES SOLARES

PID2021-126071OB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphitic Carbon Nitride as Visible-Light Photocatalyst Boosting Ozonation in Wastewater Treatment

  • Dhakshinamoorthy, Amarajothi
  • López-Francés, Antón
  • Navalón, Sergio
  • García Gómez, Hermenegildo
Light can boost ozone efficiency in advanced oxidation processes (AOPs), either by direct ozone photolysis with UV light or by using a photocatalyst that can be excited with UV-Vis or solar light. The present review summarizes literature data on the combination of ozone and the g-CN photocatalyst for the degradation of probe molecules in water, including oxalic, p-hydroxybenzoic and oxamic acids as well as ciprofloxacin and parabens. g-CN is a metal-free visible-light photocatalyst based on abundant elements that establishes a synergistic effect with ozone, the efficiency of the combination of the photocatalysis and ozonation being higher than the sum of the two treatments independently. Available data indicate that this synergy derives from the higher efficiency in the generation of hydroxyl radicals due to the efficient electron quenching by O of photogenerated conduction band electrons in the g-CN photocatalyst. Given the wide use of ozonizers in water treatment, it is proposed that their implementation with g-CN photocatalysis could also boost ozone efficiency in the AOPs of real waste waters., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and PIDS2021-126071OB-C21) and Generalitat Valenciana (Prometeo 2021-038) is gratefully acknowledged. S.N. thanks financial support by Agència Valenciana de la Innovació (AVI, INNEST/2020/111) project and Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

  • Navalón, Sergio
  • Dhakshinamoorthy, Amarajothi
  • Álvaro Rodríguez, Mercedes
  • Ferrer, B.
  • García Gómez, Hermenegildo
Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application., S.N. is gracious for the financial support from Grant PID2021- 123856OB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe. The MOF2H2 project receives funding from the European Union Horizon Europe research and innovation programme under Grant Agreement N°101084131. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement N°101022649. A.D. thanks the Universitat Politècnica de València for financial assistance through Maria Zambrano. H.G. is thankful for financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa) and the Generalitat Valenciana (Prometeo2021-038). H.G. is also gracious for the financial support from Grant PID2021-126071OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal–Organic Frameworks as Electrocatalysts

  • Peng, Yong
  • Sanati, Soheila
  • Morsali, Ali
  • García Gómez, Hermenegildo
Transition metal complexes are well-known homogeneous electrocatalysts. In this regard, metal–organic frameworks (MOFs) can be considered as an ensemble of transition metal complexes ordered in a periodic arrangement. In addition, MOFs have several additional positive structural features that make them suitable for electrocatalysis, including large surface area, high porosity, and high content of accessible transition metal with exchangeable coordination positions. The present review describes the current state in the use of MOFs as electrocatalysts, both as host of electroactive guests and their direct electrocatalytic activity, particularly in the case of bimetallic MOFs. The field of MOF-derived materials is purposely not covered, focusing on the direct use of MOFs or its composites as electrocatalysts. Special attention has been paid to present strategies to overcome their poor electrical conductivity and limited stability., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and PDI2021-126071-OB-C21), Generalitat Valenciana (Prometeo 2021-038) and Tarbiat Modares University is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Recent Advances in the Use of Covalent Organic Frameworks as Heterogenous Photocatalysts in Organic Synthesis

  • López Mangano, Alberto
  • Dalirian, Saba
  • Reza Oveisi, Ali
  • Mas-Ballesté, Rubén
  • Dhakshinamoorthy, Amarajothi
  • Alemán, José
  • García Gómez, Hermenegildo
  • Luque, Rafael
Organic photochemistry is intensely developed in the 1980s, in which the nature of excited electronic states and the energy and electron transfer processes are thoroughly studied and finally well-understood. This knowledge from molecular organic photochemistry can be transferred to the design of covalent organic frameworks (COFs) as active visible-light photocatalysts. COFs constitute a new class of crystalline porous materials with substantial application potentials. Featured with outstanding structural tunability, large porosity, high surface area, excellent stability, and unique photoelectronic properties, COFs are studied as potential candidates in various research areas (e.g., photocatalysis). This review aims to provide the state-of-the-art insights into the design of COF photocatalysts (pristine, functionalized, and hybrid COFs) for organic transformations. The catalytic reaction mechanism of COF-based photocatalysts and the influence of dimensionality and crystallinity on heterogenous photocatalysis performance are also discussed, followed by perspectives and prospects on the main challenges and opportunities in future research of COFs and COF-based photocatalysts., A.L.-M. and S.D. contributed equally to this work (both co-authors are the first author). The authors acknowledge financial support from the Iran Science Elites Federation (ISEF) and the University of Zabol (grant number: IR-UOZ-GR-9381). This work was supported by RUDN University strategic academic leadership program (R.L.). Financial support was provided by the Spanish Government (PID2021-122299NB-100), “Comunidad de Madrid” for European Structural Funds (S2018/NMT-4367) and proyectos sinergicos I+D (Y2020/NMT-6469). H.G. acknowledges financial support received from various funding agencies (PDI-2021-0126071-OB-CO21, Prometeo 2021-038 and CEX-2021-001230-S). A.D. thanks the Spanish Ministry of Science and Education for a Maria Zambrano contract. A.L.-M. thanks UAM for a FPI-UAM predoctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal organic framework composites for reduction of CO2

  • Liu, Kuan-Guan
  • Bigdeli, Fahime
  • Panjehpour, Akram
  • Morsali, Ali
  • Dhakshinamoorthy, Amarajothi
  • García Gómez, Hermenegildo
Global warming due to greenhouse gases is a major current environmental threat. In today's world those applicable technologies which convert CO into valuable and environmentally friendly fuels and chemicals are of great importance. Thanks to functional sites or guests embedded in the structure, metal organic frameworks (MOFs) show a superb potential for such a conversion that is even further enhanced in MOF composites. The present review discusses the use of MOF composites, with an emphasis on their constituent components, as catalysts for CO reduction, converting it into various value-added and environmentally friendly chemicals such as saturated and unsaturated hydrocarbons, carboxylic acids and carboxylates, and carbon monoxide. The present review covers four major approaches for CO reduction, including electroreduction, photoreduction, photoelectroreduction, and hydrogenation. All reports on the design and development of appropriate MOF composites to be used in the above-mentioned CO reductions have been considered. Finally, the future outlook on the use of MOF composites in CO reduction is provided, giving some ideas for further design highly efficient MOF composites capable of converting CO to value-added products., The authors gratefully acknowledge from Tarbiat Modares University and the support received from the Niroo Research Institute (NRI) under the contract number 99/50420/152. This work was supported by the National Natural Science Foundation of China (Grant No. 92161106), the Natural Science Foundation of Ningxia (Grant No. 2022AAC05017), and the Foundation of State Key Laboratory of Physical Chemistry of Solid Surfaces (Grant No. 202013). Financial support by the Spanish Ministry of Science and Innovation (PDI-2021-0126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021-038) is gratefully acknowledged. This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (Graphica MFA/2022/023. The Institute is a Center of Excellence Severo Ochoa (CEX-2021-001230-S). A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Challenges and opportunities for N-hydroxyphthalimide supported over heterogeneous solids for aerobic oxidations

  • Caruso, Manfredi
  • Navalón, Sergio
  • Cametti, Massimo
  • Dhakshinamoorthy, Amarajothi
  • Punta, Carlo
  • García Gómez, Hermenegildo
Organocatalysis, in combination with, or as an alternative to the use of metals, is attracting increasing interest as a sustainable route to promote selective transformations. In this context, N-hydroxyphthalimide (NHPI) has found ample application as an effective organocatalyst capable to promote the aerobic oxidation of a wide range of organic substrates, including saturated and unsaturated hydrocarbons, alcohols, amines and sulphides among others. However, most of these transformations required the use of NHPI dissolved in solution, with consequent limits in the scale-up of the process. Leaving aside the reviews of NHPI as organocatalyst in homogeneous phase, the present review describes the strategies reported to support or anchor NHPI on a wide range of insoluble solids, thus converting this homogeneous organocatalyst into a heterogeneous system, with the consequent advantages related to the ease of separation and recovery of the catalyst from the reaction medium, its recyclability and the possibility to develop continuous flow reactions. After a brief introductory section, a detailed description of the catalytic mechanism is here presented, also providing a comparison between NHPI and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical, and by highlighting the main challenges associated to NHPI heterogenization. The critical description of the heterogeneous solutions is organized according to the nature of the support, focusing on metal–organic frameworks (MOFs), organic polymers, carbon-based materials, and inorganic supports, while the growing use of NHPI-containing photocatalysts is presented separately. In the final section, we outline the main achievements on the use of NHPI heterogeneous catalysis and provide our views for future developments in the area., S.N. is gracious for the financial support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe. A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). H.G. is thankful for financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa Financial support by Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033) and the Generalitat Valenciana (Prometeo2021-038). H.G. is also gracious for the financial support from Grant PID2021-126071OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Defects and Disorder in Covalent Organic Frameworks for Advanced Applications

  • Daliran, Saba
  • Blanco, Matías
  • Dhakshinamoorthy, Amarajothi
  • Oveisi, Ali Reza
  • Alemán, José
  • García Gómez, Hermenegildo
Crystalline porous organic polymers (CPPs) or covalent organic frameworks (COFs), are composed by light elements linked by covalent bonds. Despite the remarkable progress attained, there are still bottlenecks limiting further development, some of them related to the presence of defects during their synthesis as well as in-depth understanding of structure of active centers and/or details of the reaction mechanism. Indeed, very often the proposed structures are far from reality because defects and disorders have not been considered. The present review provides an illustrative overview of “defects and disorder in COFs”. These defects include those not only generated during the synthesis and manipulation of COFs, but also lack of crystallinity, stacking disorder and network vacancies. The review starts giving general remarks on organic COFs and their synthetic methods, followed by different methods to play and manage defects, how to minimize them or how to take advantage of them to gain new properties and applications. Selected characterization techniques to quantify defective structures and active sites in COFs are also presented. Finally, the challenges and future opportunities in the field have been summarized in the last section., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). The University of Zabol is acknowledged for financial support (Grant numbers: IR-UOZ-GR-9381). A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). Authors also thank the Lorestan University for the grant support. Financial support was provided by the Spanish Government (PID2021-122299NB-I00, TED2021-130470B-I00, TED2021-129999B-C32), “Comunidad de Madrid”, European Structural Funds (S2018/NMT-4367), proyectos sinérgicos I+D (Y2020/NMT6469) and Comunidad Autónoma de Madrid (SI1/PJI/2019–00237)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Probing Defects in Covalent Organic Frameworks

  • Daliran, Saba
  • Oveisi, Ali Reza
  • Dhakshinamoorthy, Amarajothi
  • García Gómez, Hermenegildo
Defects in covalent organic frameworks (COFs) play a pivotal role in determining their properties and performance, significantly influencing interactions with adsorbates, guest molecules, and substrates as well as affecting charge carrier dynamics and light absorption characteristics. The present review focuses on the diverse array of techniques employed for characterizing and quantifying defects in COFs, addressing a critical need in the field of materials science. As will be discussed in this review, there are basically two types of defects referring either to missing organic moieties leaving free binding groups in the material or structural imperfections resulting in lower crystallinity, grain boundary defects, and incomplete stacking. The review summarizes an in-depth analysis of state-of-the-art characterization techniques, elucidating their specific strengths and limitations for each defect type. Key techniques examined in this review include powder X-ray diffraction (PXRD), infrared spectroscopy (IR), thermogravimetric analysis (TGA), nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), scanning transmission electron microscopy (STEM), scanning tunneling microscope (STM), high resolution transmission electron microcoe (HRTEM), gas adsorption, acid-base titration, advanced electron microscopy methods, and computational calculations. We critically assess the capability of each technique to provide qualitative and quantitative information about COF defects, offering insights into their complementary nature and potential for synergistic use. The last section summarizes the main concepts of the review and provides perspectives for future development to overcome the existing challenges., A.R.O. extend his acknowledgment to the University of Zabol (grant number: IR-UOZ-GR-9381) and Iran National Science Foundation (INSF) for providing funding under grant number 4025637. S.D. also thanks the support from the Lorestan University (LU). A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Molten Salt Derived MXenes: Synthesis and Applications

  • Kruger, Dawid Daniël
  • García Gómez, Hermenegildo
  • Primo, Ana
About one decade after the first report on MXenes, these 2D early transition metal carbides or nitrides have become among the best-performing materials in electrode applications related to electrical energy storage devices and power-to-fuels conversion. MXenes are obtained by a top-down approach starting from the appropriate 3D MAX phase that undergoes etching of the A-site metal. Initial etching procedures are based on the use of concentrated HF or the in situ generation of this highly corrosive and poisonous reagent. Etching of the MAX phase is one of the major hurdles limiting the progress of the field. The present review summarizes an alternative, universal, and easily scalable etching procedure based on treating the MAX precursor with a Lewis acid molten salt. The review starts with presenting the current state of the art of the molten salt etching procedure to obtain or modify MXene, followed by a summary of the applications of these MXene samples. The aim of the review is to show the versatility and advantages of molten salt etching in terms of general applicability, control of the surface terminal groups, and uniform deposition of metal nanoparticles, among other features of the procedure., This work was financially support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1).