Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Articulatory adjustments in initial voiced stops in Spanish, French and English

  • Solé, Maria-Josep|||0000-0002-2752-8767
This work reports cross-language differences in the voicing of initial voiced stops, and in the use of active maneuvers to achieve closure voicing, using multiparametric aerodynamic data. Oral pressure, oral and nasal flow, and acoustic data were obtained for utterance-initial /b d p t m/ for 10 speakers of Spanish, 6 speakers of French and 5 speakers of English. Voiced stops were classified as fully voiced or devoiced, and by shape of the oral pressure pulse (implosivized, other cavity enlarging maneuver) and/or occurrence of nasal flow (prenasalized) or oral flow (spirantized) during the stop phase in an attempt to relate aerodynamic data and actual glottal vibration to vocal-tract gestures and maneuvers to facilitate voicing. Maneuvers that favor the initiation (and sustaining) of voicing are then related to (i) language-specific differences in the use of glottal vibration during the constriction as a cue to voicing, (ii) place of articulation, and (iii) speaker dependent variation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Continuous long-term (2016-2021) monitoring of the surface deformations in the Upper Silesian Coal Basin, Poland

  • Ilieva, Maya
  • Balak, Patryk
  • Bogusławski, Paweł
  • Polanin, Piotr
  • Gruchlik, Piotr
  • Kowalski, Andrzej
  • Tondaś, Damian
  • Stasch, Krzysztof
  • Tymków, Przemysław
[EN] The Upper Silesian Coal Basin (USCB), located in Southern Poland, is one of the biggest coal deposits in Europe. It is continuously exploited since 18 century and it is one of the main industrial factors in the regional economy. As a result this is also the second populated region in Poland with 4.5 million inhabitants in the administrative province of Silesia. The extensive extractions of the underground coal resources in USCB trigger significant terrain changes leading to subsidence exceeding 1.5 m per year in some areas. Within the frames of two consecutive phases of the Polish contribution to the European Plate Observing System (EPOS) initiative, namely EPOS-PL and EPOS-PL+, a long-term monitoring over the area of USCB is performed using the advantages of the Differential Synthetic Aperture Radar (DInSAR) technology. C-band radar images acquired by the European Space Agency’s Sentinel-1 mission comprising the period between the years of 2016 and 2021 are processed to delineate the range and amplitude of the deformation zones for chosen test sites. The Sentinel-1 constellation provides imagery with revisit time of 6 days, higher than the classical techniques. The standard approach include measurements like levelling, performed 2 to 6 times per year over chosen lines, or measurements with Global Navigation Satellite System (GNSS), while the DInSAR approach gives wider in space and time coverage. The long period of observations gives the opportunity to assess the surface behavior due to the coal underground extractions and to construct more precisely the model of deformations., The presented investigation is part of the projects EPOS-PL (POIR.04.02.00-14-A003/16) and EPOS-PL+ (POIR.04.02.00-00-C005/19-00), European Plate Observing System, funded by the Operational Programme Smart Growth 2014–2020, Priority IV: Increasing the research potential, Action 4.2: Development of modern research infrastructure of the science sector and co-financed from European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

The tools related to mathematics teachers’ pedagogical reasoning: critical review

  • Yang, Kai-Lin
  • Tambunan, Siska
[EN] Shulman (1987) introduced pedagogical reasoning in his model of pedagogical reasoning and action, refers to the phases of activities involving comprehension, transformation, instruction, evaluation, and reflection. The present study aims at a critical review on the tools for investigating the phases of pedagogical reasoning and action for mathematics teachers. Based on a focused search in the database Scopus, 13 articles were reviewed. Findings showed three categories included mathematical tasks, teaching materials and videos. We further classified each category and connected it with Shulman’s phases of pedagogical reasoning. Mathematical tasks are classified as pure mathematical tasks and mathematical pedagogical tasks which can be connected to comprehension and transformation phases. Teaching materials are classified into three sub-categories, including materials in planning session, in implementation session, and after implementation which can be connected to comprehension and transformation, instruction, and evaluation and reflection phases, respectively. Lastly, videos are classified into three subcategories including video of self-teaching, others teaching, and movie which connected to evaluation and reflection phases. Two findings are highlighted including (1) the correspondence between the tools for pedagogical reasoning and Shulman’s phases of pedagogical reasoning and (2) the features of each sub-category of the tools related to pedagogical reasoning., This research was funded by the Ministry of Science and Technology (MOST), Taiwan, R.O.C., under the grant number MOST 107-2511-H-003 -004 -MY3.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Kalman filter for integration of GNSS and InSAR data applied for monitoring of mining deformations

  • Tondaś, Damian
  • Rohm, Witold
  • Ilieva, Maya
  • Kapłon, Jan
[EN] Ground deformation monitoring can be performed using different measurement methods, e.g., leveling, gravimetry, photogrammetry, laser scanning, satellite navigation systems, Synthetic Aperture Radar (SAR), and others. In the presented study we introduced an original methodology of integration of the Differential Satellite Interferometric SAR (DInSAR) and Global Navigation Satellite Systems (GNSS) data using Kalman filter. However, technical problems related to invalid GNSS receivers functioning and noisy DInSAR results have a great impact on calculations provided only in the forward Kalman filter mode. To reduce the impact of unexpected discontinuity of observations, a backward Kalman filter was also introduced. The applied algorithm was tested in the Upper Silesian coal mining region in Poland. The paper presents the methodology of DInSAR and GNSS integration appropriate for small-scale and non-linear motions. The verification procedure of the obtained results was performed using an external data source – GNSS campaign measurements. The overall RMS errors reached 18, 16, and 42 mm for the Kalman forward, and 19, 17, and 44 mm for the Kalman backward approaches in North, East, and Up directions, respectively., This study was started in 2016 in the frames of the EPOS-PL project POIR.04.02.00-14-A003/16, and continued in 2021-2022 within the EPOS-PL+ project POIR.04.02.00-00-C005/19-00, that were funded by the Operational Program Smart Growth 2014–2020, Priority IV: Increasing research potential, Action 4.2: Development of modern research infrastructure in the science sector. The presented investigation was accomplished as part of a scientific internship at Delft University of Technology (TU Delft), Netherlands, conducted within the GATHERS project, funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 857612. The authors would like to express their gratitude to Freek van Leijen and Hans van der Marel from TU Delft for the valuable guidance and discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Evaluación de un sistema DASH para el streaming de vídeo 3D

  • Guzmán-Castillo, Paola Fernanda|||0000-0002-1887-8562
  • Arce Vila, Pau|||0000-0001-5726-9228
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
[ES] La distribución de contenidos multimedia, y en particular el streaming de vídeo, domina actualmente el tráfico global de Internet y su importancia será incluso mayor en el futuro. Miles de títulos se agregan mensualmente a los principales proveedores de servicios, como Netflix, YouTube y Amazon. Y de la mano del consumo de contenidos de alta definición que se convierte en la principal tendencia, se puede observar nuevamente un incremento en el consumo de contenidos 3D. Esto ha hecho que las temáticas relacionadas con la producción de contenidos, codificación, transmisión, Calidad de Servicio y Calidad de Experiencia percibida por los usuarios de los sistemas de distribución de vídeo 3D sean un tema de investigación con numerosas contribuciones en los últimos años. Es importante tener en cuenta que en un sistema de distribución de vídeo degradaciones debidas a la producción y la codificación, así como los errores de transmisión, puede degradar la calidad del vídeo recibida y percibida por el usuario. Por tanto, como parte de este trabajo se ha realizado en primer lugar una comparación del rendimiento de los estándares de codificación de vídeo más populares H.264, H.265 y sus correspondientes extensiones para vídeo 3D. Por otra parte, se ha realizado una evaluación experimental de la calidad del vídeo recibida en un escenario HTTP de streaming adaptativo (DASH) de vídeo 3D., Este artículo se enmarca en el Proyecto PROMETEOII/2014/003 financiado por la Generalitat Valenciana y el Proyecto “Desarrollo de Nueva Plataforma de Entretenimiento Multimedia para Entornos Náuticos” (CDTI IDI -20170348).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Severity of Failures in Spur Gearboxes by Vibration Signal Analysis

  • Perez-Torres, Antonio
  • Sanchez, Rene-Vinicio
  • Barceló-Cerdá, Susana|||0000-0001-5110-6698
[EN] Gearboxes are a fundamental component in the operation of rotating machinery due to their efficiency in power transmission. Therefore, determining the severity level of a failure at an early stage not only avoids machine downtime but also unexpected maintenance activities. This chapter presents a methodology to determine the severity level of different failures in spur gearboxes by analysing the vibration signal, for which a data mining process is carried out using artificial intelligence (AI) techniques. The condition indicators (CIs) in the time, frequency, and time-frequency domains extract the vibration signal features. The CIs from all three domains are merged into a single database (DB), the dimensionality is reduced through a principal component analysis (PCA), and the main factors are used to determine the failure severity level through random forest (RF) and k-nearest neighbour (KNN) classification models, and factorial analysis of variance (ANOVA) tests are performed. Excellent results were obtained in classification accuracy and the area under the curve (AUC) of the receiver operating characteristic (ROC)., This work was sponsored by the Universidad Politécnica Salesiana through the research project entitled “Evaluación de la severidad de fallos en engranajes rectos y helicoidales mediante señales de vibración, corriente y emisión acústica” No. 013-003-2019-2105-22 of the (GIDTEC) “Grupo de Investigación y Desarrollo en Tecnologías Industriales”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Protein Nanomechanics ¿ as Studied by AFM Single-Molecule Force Spectroscopy

  • Carrión-Vázquez, Mariano Sixto
  • Oberhauser, A. F.
  • Díez, Héctor
  • Hervás, Rubén
  • Oroz, Javier
  • Fernandez, Jesus
  • Martínez-Martín, David
We are in debt to J. Clarke, H. Li, F. Ritort, and S. García-Manyes for their critical reading of the manuscript. We thank J.M. Fernández, j. Clarke, and F. Ritort for kindly sending preprints of their current works. We also thank the members of the M.C. -V. laboratory for helpful discussions and comments on the manuscript.this work was supported by grants from the former Spanish Ministry of Science and Tecnnology (BIO2003-08004), the Consejería de Educación of the Madrid Community (GR/SAL/0836/2004) and the Institutional RED CIEN (G03/06) to M.C. -V. and from the National Institutes of Health (DK067443) and the John Sealy Memorial endowment fund for biomedical Research to A.F.O. We apologize to many of our colleagues for omitting or only indirectly citing their work. Owing to the limitations of space, some important contributions to the main points of our review have not been cited and some review articles, rather than the primary sources, have sometimes been preferred as references. While this chapter was in proof several papers have been published reporting important facts for this field. Thus the surprising Hookean behaviour of ankyrin (lee et al. 2006) as well as the mechanical refolding of ankyrin repeats (lee et al. 2006) and RNase H (Cecconi et al. 20059; the later study has been done with optical tweezers and found RNase H to be a three-state folding protein; also a recent publication has reported a higher mechanical stability for DHFR (around 130pN), although at a higher loading rate than previously used (Wilcox et al. 2005); this study has also brought additional evidence supporting the dependence of mitochondrial unfolding on the local structure adjacent to the targetting sequence, similar to th findings from AFM unfolding. Finally, another study suggests that the mechanism for mitochondrial unfolding may be somehow different from those involved in AFM and chemical techniques (Sato et al. 2005)