Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Passive-aggressive for on-line learning in statistical machine translation

  • Martínez Gómez, Pascual
  • Sanchis Trilles, Germán
  • Casacuberta Nolla, Francisco|||0000-0002-8497-5598
New variations on the application of the passive-aggressive algorithm to statistical machine translation are developed and compared to previously existing approaches. In online adaptation, the system needs to adapt to real-world changing scenarios, where training and tuning only take place when the system is set-up for the first time. Post-edit information, as described by a given quality measure, is used as valuable feedback within the passive-aggressive framework, adapting the statistical models on-line. First, by modifying the translation model parameters, and alternatively, by adapting the scaling factors present in stateof- the-art SMT systems. Experimental results show improvements in translation quality by allowing the system to learn on a sentence-by-sentence basis., This paper is based upon work supported by the EC (FEDER/FSE) and the Spanish MICINN under projects MIPRCV “Consolider Ingenio 2010” (CSD2007-00018) and iTrans2 (TIN2009-14511). Also supported by the Spanish MITyC under the erudito.com (TSI-020110-2009-439) project, by the Generalitat Valenciana under grant Prometeo/2009/014 and scholarship GV/2010/067 and by the UPV under grant 20091027.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Multimodal interactive transcription of ancient text images

  • Romero Gómez, Verónica
  • Sánchez Peiró, Joan Andreu|||0000-0003-0423-2020
  • Toselli, Alejandro Héctor|||0000-0001-6955-9249
  • Vidal, Enrique|||0000-0003-4579-5196
The amount of digitized legacy documents has been rising dramatically over the last years due mainly to the increasing number of on-line digital libraries publishing this kind of documents. On one hand, the vast majority of these documents remain waiting to be transcribed into a textual electronic format (such as ASCII or PDF) that would provide historians and other researchers new ways of indexing, consulting and querying these documents. On the other hand, in some cases, adequate transcriptions of the handwritten text images are already available. This drives an increasing need to align images and transcriptions in order to make it more comfortable the consulting of these documents. In this work two systems are presented to deal with these issues. The first one aims at transcribing these documents using a interactive-predictive approach, which integrates user corrective-feedback actions in the proper recognition process. The second one presents an alignment method based on the Viterbi algorithm to find mappings between word images of a given handwritten document and their respective (ASCII) words on its given transcription., Work supported by the Spanish Government (MICINN and “Plan E”) under the MITTRAL (TIN2009-14633-C03-01) research project and under the research programme Consolider Ingenio 2010: MIPRCV (CSD2007- 00018) and the Generalitat Valenciana under gran Prometeo/2009/14.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Active learning for dialogue act labelling

  • Ghigi, Fabrizio
  • Tamarit Ballester, Vicent
  • Benedí Ruiz, José Miguel
  • Martínez-Hinarejos, Carlos-D.|||0000-0002-6139-2891
Active learning is a useful technique that allows for a considerably reduction of the amount of data we need to manually label in order to reach a good performance of a statistical model. In order to apply active learning to a particular task we need to previously define an effective selection criteria, that picks out the most informative samples at each iteration of active learning process. This is still an open problem that we are going to face in this work, in the task of dialogue annotation at dialogue act level. We present two different criteria, weighted number of hypothesis and entropy, that we have applied to the Sample Selection Algorithm for the task of dialogue act labelling, that retrieved appreciably improvements in our experimental approach. © 2011 Springer-Verlag., Work supported by the EC (FEDER/FSE) and the Spanish MEC/MICINN under the MIPRCV “Consolider Ingenio 2010” program (CSD2007-00018), MITTRAL (TIN2009-14633-C03-01) projects and the FPI scholarship (BES-2009-028965). Also supported by the Generalitat Valenciana under grant Prometeo/2009/014 and GV/2010/067
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

The Contribution of Nonlinear Methods in the Understanding of Atrial Fibrillation

  • Alcaraz Martínez, Raúl
  • Rieta, J J|||0000-0002-3364-6380
This work was supported by the projects TEC2010–20633 from the Spanish Ministry of Science and Innovation and PPII11–0194–8121 and PII1C09–0036–3237 from Junta de Comunidades de Castilla-La Mancha.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Experimental investigation of Ethane and Propane injection under sub- and super-critical conditions

  • Vallee, Nathalie
  • Ribert, Guillaume
  • Blaisot, Jean-Bernard
  • Lisiecki, Denis
[EN] Studying a fluid flow under high-pressure conditions through reliable experiments is still nowadays a challenge. When the chamber pressure exceeds the critical pressure of working fluids the supercritical state of matter is reached and the distinction between gas and liquid becomes blurred. For such special conditions, experimental data are scarce and need to be consolidated. Indeed, the modification of the local refractive index induced by density gradient needs to be analyzed with appropriate image-based technique. In the present study, the REFINE test bench (Real-gas Effect on Fluid Injection: a Numerical and Experimental study) has been designed at CORIA Lab to study the non-reactive injection of Ethane and Propane into Nitrogen under sub- and supercritical conditions. The ambient gas pressure can be raised up to 6 MPa and warmed up to 573 K to scan sub- and trans-critical injections. The chamber is equipped with two perpendicular optical axes allowing simultaneously different optical diagnostics. Experimental data are collected from shadowgraph and diffused backlight illumination techniques. Quantitative measurements of jet spreading angle and breakup length are compared to results coming from literature exhibiting multiple flows topologies., This work was funded by the ANR (Agence Nationale de la Recherche) research project REFINE (Real-gas Effects on Fluid Injection: a Numerical and Experimental study), Grant No. ANR-13-BS09-0007.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Language identification for interactive handwriting transcription of multilingual documents

  • Del Agua Teba, Miguel Angel
  • Serrano Martinez Santos, Nicolas
  • Juan, Alfons|||0000-0002-9984-4072
An effective approach to handwriting transcription of (old) documents is to follow a sequential, line-by-line transcription of the whole document, in which a continuously retrained system interacts with the user. In the case of multilingual documents, however, a minor yet important issue for this interactive approach is to first identify the language of the current text line image to be transcribed. In this paper, we propose a probabilistic framework and three techniques for this purpose. Empirical results are reported on an entire 764-page multilingual document for which previous empirical tests were limited to its first 180 pages, written only in Spanish. © 2011 Springer-Verlag., Work supported by the EC (FEDER, FSE), the Spanish Government (MICINN, MITyC, “Plan E”, under grants MIPRCV “Consolider Ingenio 2010”, MITTRAL TIN2009- 14633-C03-01 and FPU AP2007-02867), the Generalitat Valenciana (grant Prometeo/2009/014 and ACOMP/2010/051) and the UPV (grant 20080033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Microwave and ultrasounds together – a challenge

  • Vinatoru, Mircea
[EN] The literature related to microwave and ultrasound working simultaneously is rather infrequent. The reason is obvious: microwave irradiation is of electromagnetic origin while ultrasound is a mechanical vibration energy. Moreover, the optimal settings for ultrasound propagation throughout a reaction media do not coincide with the conditions required for application of microwaves. Therefore, the challenge is to find a way to best combination of these sources of energy into one apparatus to allow researchers to take advantage of the features of each technology. The oldest paper describing such a combination – microwave and ultrasound is having just 20 years [1] and describe an apparatus which uses a probe system delivering ultrasound through decalin to a vessel holding the reagents dipped in the MW cavity (fig. 1a). Another possibility using a normal MW oven is described by Peng [2] (fig.1b), but this setup is having radiation leakage problems and needs a proper protection. Ragaini et all proposed another type of setup [3] (fig. 1c), not easy to reproduce, but describing calibration and parameters which show an additive increase of thermal energy delivered when MW and US works simultaneous. Insert here uploaded pictures Figure 1. Some MW-US simultaneous setups Few years ago, Cravotto and Cintas [4], disccussed for the first time the potential of using MW and US in sequential or tandem setups. Their paper discuss all possible setups for using mostly glass probe for devlivery of ultrasonic energy or classical setup (fig. 1a). Slowly the concept gain popularity and the paper of Lionelly and Mason [5] prompts to the potential industrial applications, naming the combination of microwave with ultrasound a hybrid technology. The challenge in using this “hybrid technology” is to find a vesatile and reproducible apparatus able to deliver both microwave and ultrasound at a full controlable parameters. In our laboratory we have and use the setup like in the fig. 1a, but the ultrasonic energy is delivered by an ultrasonic cleaning device attached to microwave device (SAIREM Miniflow 200SS). To achieve the above mentioned outcome launched a project to build a device which could work with MW and US in tandem (as Cravotto mentioned [4]) using an US device able to deliver more than a single ultrasonic frequency at a full controlled power. It is our believe that such a device could significantly contribute to MW-US tandem equipment development. Based on our expertise and potential proposed interaction of US with reagents [6] we will investigate the influence (if any) of ultrasound upon MW field. In this paper we will present the earlier results of “Tandem Microwave Ultrasound” energy influence on chemical reagents. References 1. Lagha, A., et al., Analusis, 1999. 27(5): p. 452-457. 2. Peng, Y. and G. Song, Green Chemistry, 2001. 3(6): p. 302-304. 3. Ragaini, V., et al., Ultrasonics Sonochemistry, 2012. 19(4): p. 872-876. 4. Cravotto, G. and P. Cintas, Chemistry - A European Journal, 2007. 13(7): p. 1902-1909. 5. Leonelli, C. and T.J. Mason, Chemical Engineering and Processing: Process Intensification, 2010. 49(9): p. 885-900. 6. Vinatoru, M. and T.J. Mason, Ultrasonics Sonochemistry, 2018., The authors acknowledge the financial support received from the Competitiveness Operational Programme 2014-2020, Action 1.1.4: Attracting high-level personnel from abroad in order to enhance the RD capacity, project: P_37_471, „Ultrasonic/Microwave Nonconventional Techniques as new tools for nonchemical and chemical processes”, financed by contract: 47/05.09.2016
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Indicadores de comportamiento de la competencia de innovación en el ámbito académico y en el profesional: revisión de la literatura

  • Aznar-Mas, Lourdes E.|||0000-0001-7224-722X
  • Pérez Peñalver, María José|||0000-0003-0403-1405
  • González-Ladrón-de-Guevara, Fernando|||0000-0002-2617-1559
  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Montero Fleta, Maria Begoña
[EN] Companies pay more and more attention to the innovation competence of their employees. Innovation is understood as either the introduction of something such as a product, service, process or method, completely new, or the improvement of something that already exists. This paper presents the work performed by the research group IEMA-UPV so as to improve the INCODE barometer (from their previous European project “Innovation Competencies Development”), to be used by both companies and universities. This barometer has been adopted and will be refined in the framework of their new European project FINCODA (“Framework for Innovation Competencies Development and Assessment”) as a tool to measure and assess the behavioral indicators of the innovation competence, which are being identified through a systematic literature review. As a part of the research being performed, this paper also introduces the new model established by the FINCODA project. In this model, the innovation competence is presented as a cluster with three dimensions: creativity, critical thinking and the third one, intrapreneurship, which includes three sub-dimensions (initiative, teamwork and networking)., [ES] Las empresas valoran cada vez más la competencia de innovación de sus empleados, entendiendo por innovación la introducción de algo (producto, servicio, proceso o método) completamente nuevo o también la mejora de algo que ya existe. Este trabajo presenta el trabajo realizado por el grupo de investigación IEMA-UPV para la mejora del barómetro INCODE (de su proyecto europeo anterior “Innovation Competencies Development”), y la utilización de este tanto en la empresa como en la universidad. Este barómetro ha sido adoptado y será mejorado en el marco de su nuevo proyecto europeo FINCODA (“Framework for Innovation Competencies Development and Assessment”) como instrumento para medir y evaluar los indicadores del comportamiento de la competencia de innovación, que están siendo identificados como resultado de una revisión sistemática de la literatura. Como parte de la investigación que se está realizando, en este trabajo se presenta, asimismo, el nuevo modelo establecido por el proyecto FINCODA, en el que la competencia de innovación se muestra como un conjunto en el que se encuentran integradas tres dimensiones: creatividad, pensamiento crítico y una tercera, intraemprendedurismo, que incluye tres sub-dimensiones (iniciativa, trabajo en equipo y trabajo en red)., Este trabajo ha sido financiado con el Proyecto Erasmus+ Project FINCODA, Framework for Innovation Competences Development and Assessment_554493-EPP-1-2014-1-FIEPPKA2-KA (The European Commission support for the production of this publication does not constitute an endorsement of the contents which reflects the views only of the authors, and the Commission cannot be held responsible for any use which may be made of the information contained therein) y el Proyecto PIME 2015-2016 A/09_Evaluación de los indicadores del comportamiento innovador en el alumno universitario, de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Explicit length modelling for statistical machine translation

  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Andrés Ferrer, Jesús
Explicit length modelling has been previously explored in statistical pattern recognition with successful results. In this paper, two length models along with two parameter estimation methods for statistical machine translation (SMT) are presented. More precisely, we incorporate explicit length modelling in a state-of-the-art log-linear SMT system as an additional feature function in order to prove the contribution of length information. Finally, promising experimental results are reported on a reference SMT task. © 2011 Springer-Verlag., Work supported by the EC (FEDER/FSE) and the Spanish MEC/MICINN under the MIPRCV “Consolider Ingenio 2010” program (CSD2007-00018) and iTrans2 (TIN2009-14511) projects. Also supported by the Spanish MITyC under the erudito.com (TSI-020110-2009-439) project and by the Generalitat Valenciana under grant Prometeo/2009/014 and GV/2010/067, and by the “Vicerrectorado de Investigaci´on de la UPV” under grant 20091027.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Optimization of microwave assisted delignification of wood residues by surface response methodology

  • Trifan, Adrian
  • Calinescu, Ioan
  • Vinatoru, Mircea
  • Gavrila, Adina
[EN] Efficient processing of vegetal biomass is a great challenge to current research studies. This work is focused on improving the yield of enzymatic hydrolysis of wood residues by removal of lignin using a alkaline wash assisted by microwave heating. The treatments were carried out for one hour in a pressurized microwave reactor (Synthwave-Milestone). The performance of the treatments was assessed by monitoring the concentration of lignin (determined by UV absorbance at 320 nm against a calibration curve). Each experiment was carried out in duplicate. The treatment conditions were established according to an experimental matrix constructed (in Design Expert 11) after the careful selection of the most important factors that affect the lignin removal from wood residue: concentration of NaOH solution, liquid to solid ratio and temperature. A central composite design was constructed with the independent factors mentioned above. ANOVA indicated adequate fitting of the model (correlation coefficient R2=0.95). The exploration of the experimental space (figure 1) with the fitted model indicates the dominant effect of temperature as independent factor. Optimization of experimental conditions within the experimental space was carried according to the following criteria: minimization of temperature, liquid to solid ratio and NaOH concentration and maximization of the response variable, the lignin concentration. The optimal solution (141 mg lignin / g dry wood residue) proposed by the model for these optimization criteria indicates a point in the region determined by the following coordinates: 0.4M NaOH, 1070C and a ratio of liquid to solid equal to 50., The authors acknowledge the financial support received from the Competitiveness Operational Programme 2014 - 2020, Action 1.1.4: Attracting high-level personnel from abroad in order to enhance the RD capacity, ID project: P_37_471, MY SMIS 105145, Ultrasonic/Microwave nonconventional techniques as new tools for nonchemical and chemical processes, financed by contract: 47/05.09.2016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Character-level interaction in multimodal computer-assisted transcription of text images

  • Martín-Albo Simón, Daniel
  • Romero Gómez, Verónica
  • Toselli, Alejandro Héctor|||0000-0001-6955-9249
  • Vidal, Enrique|||0000-0003-4579-5196
To date, automatic handwriting text recognition systems are far from being perfect and heavy human intervention is often required to check and correct the results of such systems. As an alternative, an interactive framework that integrates the human knowledge into the transcription process has been presented in previous works. In this work, multimodal interaction at character-level is studied. Until now, multimodal interaction had been studied only at whole-word level. However, character-level pen-stroke interactions may lead to more ergonomic and friendly interfaces. Empirical tests show that this approach can save significant amounts of user effort with respect to both fully manual transcription and non-interactive post-editing correction., Work supported by the Spanish Government (MICINN and “Plan E”) under the MITTRAL (TIN2009-14633-C03-01) research project and under the research programme Consolider Ingenio 2010: MIPRCV (CSD2007-00018), and by the Generalitat Valenciana under grant Prometeo/2009/014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Partial least squares for word confidence estimation in machine translation

  • González Rubio, Jesús
  • Navarro Cerdan, José Ramón|||0000-0002-6692-5941
  • Casacuberta Nolla, Francisco|||0000-0002-8497-5598
We present a new technique to estimate the reliability of the words in automatically generated translations. Our approach addresses confidence estimation as a classification problem where a confidence score is to be predicted from a feature vector that represents each translated word. We describe a new set of prediction features designed to capture context information, and propose a model based on partial least squares to perform the classification. Good empirical results are reported in a large-domain news translation task., Work supported by the European Union Seventh Framework Program (FP7/2007-2013) under the CasMaCat project (grants agreement no 287576), by Spanish MICINN under TIASA (TIN2009-14205-C04-02) project, and by the Generalitat Valenciana under grant ALMPR (Prometeo/2009/014).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Online learning via dynamic reranking for Computer Assisted Translation

  • Martínez Gómez, Pascual
  • Sanchis Trilles, Germán
  • Casacuberta Nolla, Francisco|||0000-0002-8497-5598
New techniques for online adaptation in computer assisted translation are explored and compared to previously existing approaches. Under the online adaptation paradigm, the translation system needs to adapt itself to real-world changing scenarios, where training and tuning may only take place once, when the system is set-up for the first time. For this purpose, post-edit information, as described by a given quality measure, is used as valuable feedback within a dynamic reranking algorithm. Two possible approaches are presented and evaluated. The first one relies on the well-known perceptron algorithm, whereas the second one is a novel approach using the Ridge regression in order to compute the optimum scaling factors within a state-of-the-art SMT system. Experimental results show that such algorithms are able to improve translation quality by learning from the errors produced by the system on a sentence-by-sentence basis., This paper is based upon work supported by the EC (FEDER/FSE) and the Spanish MICINN under projects MIPRCV “Consolider Ingenio 2010” (CSD2007-00018) and iTrans2 (TIN2009-14511). Also supported by the Spanish MITyC under the erudito.com (TSI-020110-2009-439) project, by the Generalitat Valenciana under grant Prometeo/2009/014 and scholarship GV/2010/067 and by the UPV under grant 20091027
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

An Image-Based Measure for Evaluation of Mathematical Expression Recognition

  • Álvaro Muñoz, Francisco
  • Benedí Ruiz, José Miguel
  • Sánchez Peiró, Joan Andreu|||0000-0003-0423-2020
Mathematical expression recognition is an active research field that is related to document image analysis and typesetting. In this study, we present a novel global performance evaluation measure for mathematical expression recognition based on image matching. Using an image representation for evaluation tries to overcome the representation ambiguity as human beings do. The results of a recent competition were used to perform several experiments in order to analyze the benefits and drawbacks of this measure., This work was partially supported by the Spanish MEC under the STraDA research project (TIN2012-37475-C02-01), the MITTRAL (TIN2009-14633-C03-01) project, the FPU grant (AP2009-4363), by the Generalitat Valenciana under the grant Prometeo/2009/014, and through the EU 7th Framework Programme grant tranScriptorium (Ref: 600707)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Improving the minimum description length inference of phrase-based translation models

  • Gonzalez Rubio, Jesus
  • Casacuberta Nolla, Francisco|||0000-0002-8497-5598
We study the application of minimum description length (MDL) inference to estimate pattern recognition models for machine translation. MDL is a theoretically-sound approach whose empirical results are however below those of the state-of-the-art pipeline of training heuristics. We identify potential limitations of current MDL procedures and provide a practical approach to overcome them. Empirical results support the soundness of the proposed approach., Work supported by the EU 7th Framework Programme (FP7/2007–2013) under the CasMaCat project (grant agreement no 287576), by Spanish MICINN under grant TIN2012-31723, and by the Generalitat Valenciana under grant ALMPR (Prometeo/2009/014).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Integrating the goal and business process perspectives in information system analysis

  • Ruiz Carmona, Luz Marcela
  • Costal, Dolors
  • España Cubillo, Sergio
  • Franch, Xavier
  • Pastor López, Oscar|||0000-0002-1320-8471
There are several motivations to promote investment and scientific effort in the integration of intentional and operational perspectives: organisa- tional reengineering, continuous improvement of business processes, alignment among complementary analysis perspectives, information traceability, etc. In this paper we propose the integration of two modelling languages that support the creation of goal and business process models: the i* goal-oriented modelling method and Communication Analysis, a communication-oriented business process modelling method. We describe the methodological integration of the two modelling methods with the aim of fulfilling several criteria: i) to rely on appropriate theories; ii) to provide abstract and concrete syntaxes; iii) to provide scenarios of application; and iv) to develop tool support. We provide guidelines for using the two modelling methods in a top-down analysis scenario. We also present an illustrative case that demonstrates the feasibility of the approach., This work has been supported by the Spanish MICINN PROS-Req (TIN2010-19130-C02-01, TIN2010-19130-C02-02); the Generalitat Valenciana ORCA (PROMETEO/2009/015); the FPI-UPV pre-doctoral grant; the European Commission FP7 Project CaaS (611351); and the ERDF structural funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Indios y franciscanos en la construcción de la Alta California

  • Bernabéu Albert, Salvador
  • Ortega Soto, Martha
La ocupación de las costas pacíficas de Norteamérica fue un deseo de la Corona española desde los primeros viajes de exploración en el siglo XVI. Los monarcas españoles financiaron y enviaron un gran número de expediciones al Noroeste, que pueden agruparse en dos etapas. La primera comenzaría con los viajes organizados por Hernán Cortés y terminaría con las expediciones marítimas de Sebastián Vizcaíno (1532-1603). Este último fijó un punto mítico en la costa para iniciar la colonización y servir de refugio al galeón de Manila: el puerto de Monterrey; además de alabar las excelentes condiciones de otro fondeadero situado más al sur que bautizó como puerto de San Diego. Tras un largo paréntesis, en el que las actividades españolas se concentraron en el Golfo de California o Mar de Cortés, la llegada del visitador general de Nueva España, José de Gálvez, relanzó nuevamente las empresas marítimas y colonizadoras, que tendrían su canto de cisne con el viaje del teniente de fragata Juan Bautista Matute al norte de San Francisco (1767-1793), Este trabajo se enmarca en el Proyecto de Excelencia "El Pacífico Hispano: imágenes, conocimiento y poder" (P09-HUM-5392), aprobado y financiado por la Junta de Andalucía para el cuatrienio 2010-2013, Peer reviewed
Docta Complutense
Publication Capítulo o parte de un libro (BookPart)

Dalí: las Ilusiones ópticas de las postales como inspiración publicitaria

  • Mayo Vega, Luis Manuel
El capítulo analiza cómo las postales kitsch con ilusiones ópticas que coleccionaba Dalí se convierten en una fuente central para su trabajo publicitario y para su método paranoico‑crítico. Examina el interés surrealista por estas postales populares, su circulación masiva y sus rasgos gráficos (ambigüedad visual, imágenes dobles, fotomontajes), y propone una tipología en la que destacan las postales tipográficas, humorísticas, eróticas y específicamente ópticas, las más cercanas al universo daliniano. A partir de ejemplos de anuncios y carteles diseñados por Dalí para marcas y revistas, el texto muestra cómo el artista traslada la lógica de la postal kitsch al lenguaje publicitario, situando la cultura de masas y el subconsciente colectivo en el centro de su reflexión estética.
Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Back to Front Architecture for Diagnosis as a Service

  • Sánchez Ramos, Carles|||0000-0003-3435-9882
  • Viñas, Miguel-Angel
  • Atens, Coen Jacobus
  • Borràs, Agnés|||0000-0002-7747-9924
  • Gil, Debora|||0000-0002-2770-4767
Software as a Service (SaaS) is a cloud computing model in which a provider hosts applications in a server that customers use via internet. Since SaaS does not require to install applications on customers' own computers, it allows the use by multiple users of highly specialized software without extra expenses for hardware acquisition or licensing. A SaaS tailored for clinical needs not only would alleviate licensing costs, but also would facilitate easy access to new methods for diagnosis assistance. This paper presents a SaaS client-server architecture for Diagnosis as a Service (DaaS). The server is based on docker technology in order to allow execution of softwares implemented in different languages with the highest portability and scalability. The client is a content management system allowing the design of websites with multimedia content and interactive visualization of results allowing user editing. We explain a usage case that uses our DaaS as crowdsourcing platform in a multicentric pilot study carried out to evaluate the clinical benefits of a software for assessment of central airway obstruction.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Capítulo o parte de un libro (BookPart)

Ecos de la Atlántida en la Isla de los Amores de Camôes: un motivo nacionalista del Renacimiento.

  • Fernández Camacho, Pamina
En este estudio revisamos el pasaje de la “Isla de los Amores” del poema Os Lusiadas de Camôes. A partir de la publicación, en 1482, de la primera traducción del Critias por Ficino, y sobre todo a partir del descubrimiento de América, la Atlántida se convirtió en uno de los temas ideológicos que fundamentaban el imperialismo español y su dominio de las tierras de ultramar (cf. Pamprolini 1947, Tord 1999) ; un tema que, como demostró Vidal-Naquet (2005), heredarían más adelante potencias y naciones emergentes para fundamentar sus reivindicaciones. Mediante un análisis del Canto X, nuesto propósito es poner de relieve claves que alertan sobre un uso, por parte del poeta, de motivos relacionados con el mito atlante tal y como había sido entendido por la literatura de la época. A partir de esto, podemos extraer conclusiones útiles para dar perspectiva a ciertas ambigüedades del poema, arrojando luz sobre el empleo del mito “redescubierto” en el siglo XVI, y la creación de estereotipos asociados a él que llegarán a oscurecer el sentido original de la ficción platónica en la época moderna.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Capítulo o parte de un libro (BookPart)

Cotas para distribuciones condicionadas bajo dependencia positiva: una aplicación

  • Sordo Díaz, Miguel Ángel
  • Suárez Llorens, Alfonso
  • Bello Espina, Alfonso José
Recientemente, Sordo, Suárez-Lloréns y Bello (2013) han obtenido cotas estocásticas para las distribuciones de los riesgos individuales de una cartera cuando estos se condicionan a que el riesgo agregado de cartera supera su valor en riesgo. Las esperanzas de estas distribuciones condicionadas pueden ser interpretadas como las contribuciones marginales al riesgo agregado. En este trabajo se ilustran estos resultados mediante una aplicación con datos reales del sector asegurador español., Miguel A. Sordo y Alfonso Suárez-Lloréns agradecen la financiación del Ministerio de Ciencia e Innovación (proyecto MTM2009-08326) y de la Consejería de Economía, Innovación y Ciencia (proyecto P09-SEJ-4739).