Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

PointerVol: a laser pointer for swept volumetric displays

  • Fernández Ortega, Unai Javier
  • Sarasate Azcona, Iosune
  • Ezcurdia Aguirre, Íñigo Fermín
  • López-Amo Ocón, Manuel
  • Fernández Fernández, Iván
  • Marzo Pérez, Asier
A laser pointer is a commonly used device that does not require communication with the display system or modifications on the applications, the presenter can just take a pointer and start using it. When a laser pointer is used on a volumetric display, a line rather than a point appears, making it not suitable for pointing at 3D locations. PointerVol is a modified laser pointer that allows users to point to 3D positions inside a swept volumetric display. We propose two PointerVol implementations based on timing and distance measurements, we evaluate the pointing performance using them. Finally, we present other features such as multi-user pointing, line patterns and a multi-finger wearable. PointerVol is a simple device that can help to popularize volumetric displays, or at least to make them more usable for presentations with true-3D content., This research was funded by the EU Horizon 2020 research and innovation programme under grant agreement No 101017746 TOUCHLESS, and by the European Research Consortium under grant agreement No 101042702 Intevol-ERC2021-STG
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

LeviPrint: contactless additive manufacturing using acoustic levitation with position and orientation control of elongated parts

  • Ezcurdia Aguirre, Íñigo Fermín
  • Morales González, Rafael
  • Marzo Pérez, Asier
LeviPrint assembles small objects in a contactless way using ultrasonic phased-arrays and optimization algorithms. We explore a set of methods that enables 6 Degrees-of-Freedom (DoF) control of elongated bodies. We then evaluate different ultrasonic arrangements to optimize the manipulation of these bodies. The combination of arrangements and optimization algorithms allow us to levitate, orientate and assemble complex objects. These techniques and arrangements can be leveraged for the microfabrication of electromechanical components and in-vivo additive manufacturing. We highlight the reduction of cross-contamination and the capability to manufacture inside closed containers from the outside., This research was funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101017746, TOUCHLESS
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Using low-frequency sound to create non-contact sensations on and In the body

  • Hassan, Waseem
  • Marzo Pérez, Asier
  • Hornbæk, Kasper
This paper proposes a method for generating non-contact sensations using low-frequency sound waves without requiring user instrumentation. This method leverages the fundamental acoustic response of a confined space to produce predictable pressure spatial distributions at low frequencies, called modes. These modes can be used to produce sensations either throughout the body, in localized areas of the body, or within the body. We first validate the location and strength of the modes simulated by acoustic modeling. Next, a perceptual study is conducted to show how different frequencies produce qualitatively different sensations across and within the participants' bodies. The low-frequency sound offers a new way of delivering non-contact sensations throughout the body. The results indicate a high accuracy for predicting sensations at specific body locations., This work is funded by the European Union's Horizon 2020 research and innovation programme [grant number 101017746, TOUCH-LESS].
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

SparkTouch: contactless haptic spatial patterns on the palm and fingertip using electric sparks

  • Donkov Bogdanov, Stefan
  • Bouzbib, Elodie Lyath
  • Aldea Esnaola, Mikel
  • Irisarri Erviti, Josu
  • Elizondo Martínez, Sonia
  • Ezcurdia Aguirre, Íñigo Fermín
  • Marzo Pérez, Asier
Contactless haptic technologies deliver tactile feedback remotely, eliminating the need for direct skin contact and reducing setup time. However, current technologies have relatively weak intensity or coarse perception resolution. This paper proposes SparkTouch, an approach exploring the use of electric arcs for delivering contactless spatio-temporal patterns in the palm and fingertip. We first quantified the perceptibility of electric sparks as a function of frequency and hand location. We then conducted a spatio-temporal pattern recognition study (n = 30), where we measured user's discrimination accuracy for sparks moving along the palm and fingertip for 14 patterns, including lines and shapes of different directions. Results show that (1) accuracy is similar to other contactless methods, (2) discrimination between lines or shapes is over 85 %, and (3) their direction can be detected. This study is the first to investigate contactless spatio-temporal haptic patterns on the fingertip; and we demonstrate (4) an equivalent recognition accuracy between fingertip and palm, making electric arcs a promising technology for mid-air haptics on the fingertip. Altogether, SparkTouch paves the way for future fine contactless haptics, with envisioned scenarios such as contactless mid-air interaction with public kiosks or keypads., This research was funded by the EU Horizon 2020 research and innovation programme under grant agreement No 101017746 TOUCHLESS, and by the European Research Consortium under grant agreement No 101042702 Intevol- ERC2021-STG.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Heartbeat resonance: inducing non-contact heartbeat sensations in the chest

  • Hassan, Waseem
  • Da, Liyue
  • Elizondo Martínez, Sonia
  • Hornbæk, Kasper
Perceiving and altering the sensation of internal physiological states, such as heartbeats, is key for biofeedback and interoception. Yet, wearable devices used for this purpose can feel intrusive and typically fail to deliver stimuli aligned with the heart's location in the chest. To address this, we introduce Heartbeat Resonance, which uses low-frequency sound waves to create non-contact haptic sensations in the chest cavity, mimicking heartbeats. We conduct two experiments to evaluate the system's effectiveness. The first experiment shows that the system created realistic heartbeat sensations in the chest, with 78.05 Hz being the most effective frequency. In the second experiment, we evaluate the effects of entrainment by simulating faster and slower heart rates. Participants perceived the intended changes and reported high confidence in their perceptions for +15% and -30% heart rates. This system offers a non-intrusive solution for biofeedback while creating new possibilities for immersive VR environments., This work is funded by the European Union's Horizon 2020 research and innovation programme [grant number 101017746, TOUCHLESS].
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

TipTrap: a co-located direct manipulation technique for acoustically levitated content

  • Jankauskis, Eimontas
  • Elizondo Martínez, Sonia
  • Montano Murillo, Roberto
  • Marzo Pérez, Asier
  • Martinez Plasencia, Diego
Acoustic levitation has emerged as a promising approach for mid-air displays, by using multiple levitated particles as 3D voxels, cloth and thread props, or high-speed tracer particles, under the promise of creating 3D displays that users can see, hear and feel with their bare eyes, ears and hands. However, interaction with this mid-air content always occurred at a distance, since external objects in the display volume (e.g. user’s hands) can disturb the acoustic fields and make the particles fall. This paper proposes TipTrap, a co-located direct manipulation technique for acoustically levitated particles. TipTrap leverages the reflection of ultrasound on the users’ skin and employs a closed-loop system to create functional acoustic traps 2.1 mm below the fingertips, and addresses its 3 basic stages: selection, manipulation and deselection. We use Finite-Differences Time Domain (FDTD) simulations to explain the principles enabling TipTrap, and explore how finger reflections and user strategies influence the quality of the traps (e.g. approaching direction, orientation and tracking errors), and use these results to design our technique. We then implement the technique, characterizing its performance with a robotic hand setup and finish with an exploration of the ability of TipTrap to manipulate different types of levitated content., This research was funded by the EU Horizon 2020 research and innovation programme under grant agreement No 101017746 TOUCHLESS, the AHRC UK-China Research-Industry Creative Partnerships (AH/T01136X/2) and EPSRC and Ultraleap Prosperity Fund (EP/V037846/1).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Comparing a mid-air two-hand pinching point-and-click technique with mouse, keyboard and touchfree

  • Lafuente Duque, Melchor
  • Elizondo Martínez, Sonia
  • Fernández Ortega, Unai Javier
  • Marzo Pérez, Asier
Some of our daily activities are performed by interacting with public touchscreens, such as food kiosks, bank tellers and newsstands. Nonetheless, the physical contact with these screens that are used by different people may be considered unhygienic. To avoid contact, some screens already integrate one-hand contactless interaction technologies, i.e. Leap Motion Controller, though they may lead to arm fatigue and slow performance. We present LeapPointer, a mid-Air two-hand pinching point-And-click technique. Specifically, this technique relies on a Leap Motion device to track both hands, and proposes a new software tool that allows bimanual selection through pointing and pinching gestures. A user study was performed to compare LeapPointer with two other techniques: The common mouse/keyboard and the current UltraLeap's TouchFree technique. Task completion time and accuracy as well as subjective data were gathered. The analysis of these data suggested that LeapPointer is significantly faster than the other touchless technique although less accurate. Self-reported fatigue was less with LeapPointer than with TouchFree., This research was funded by the EU Horizon 2020 research and innovation programme under grant agreement No 101017746 TOUCHLESS, and by the European Research Consortium under grant agreement No 101042702 Intevol-ERC2021-STG.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Smarterial – Smart matter optomagnetic

  • Irisarri Erviti, Josu
  • Marzo Pérez, Asier
  • Galarreta Rodríguez, Itziar
Smart materials, also known as programmable materials, are a combination of different components that have the capability to change shape, move around and adapt to numerous situations by applying an external controllable field. Previous works have used optically guided matter or magnetically actuated materials, but similarly to soft robots, they are limited in spatial resolution or strength. Here we propose combining a low temperature thermoplastic polymer Polycaprolactone (PCL) with ferromagnetic powder particles (Fe). Focused light can heat this compound at specific locations and make it malleable. These heated spots can be actuated by external magnetic fields. Once the material cools down, this process can be repeated, or reversed. The compound can be actuated contact-less in the form of 3D slabs, 2D sheets, and 1D filaments. We show applications for reversible tactile displays and manipulation of objects. The laboratory team has characterised the density, weight, magnetic attraction, magnetic force, phase change, thermal and electrical conductivity and heat difusión (spread point test) for smart ferromagnetic compounds of different mixture proportions. The main advantages of this smart matter optomagnetic are the high spatial resolution of light and the strong force of magnetic attraction whilst mechanical properties of polymers are practically conserved. Due to the low temperature required and the possibility to use infrared or electromagnetic induction to heat the compound, the smart material can be used in air, water, or inside biological tissue. Eventually, Smart materials will enrich collaborative movements, such as grab and hold, and more complex ones, as reshaping and reassembling., This research was funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101017746, TOUCHLESS.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Mental workload of guiding devices: directional pulling forces, vibrotactile stimuli and audio cues

  • Donkov Bogdanov, Stefan
  • Elizondo Martínez, Sonia
  • Ezcurdia Aguirre, Íñigo Fermín
  • Sarasate Azcona, Iosune
  • Marzo Pérez, Asier
Asymmetric vibrations are known to produce a pulling sensation when stimulating the human hand. This effect has been exploited as a means of guidance. We conducted a user study to compare asymmetric vibrations, simple vibration, and sound cues for guidance in terms of task completion time and mental workload. Mental workload was evaluated (N=22) using the dual-task paradigm with a Stroop test and arithmetic operations test as secondary tasks. Audio cues improved significantly the task completion time for baseline and stroop tasks compared to the other methods. No significant differences were found for the reaction time for the guiding task. The use of audio cues was evaluated as the less mentally demanding guiding method on the NASA-TLX questionnaire., This research was funded by the EU Horizon 2020 research and innovation programme under grant agreement No 101017746 TOUCHLESS, and by the European Research Consortium under grant agreement No 101042702 Intevol-ERC2021-STG.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Mid-air contactless haptics to augment VR experiences

  • Ezcurdia Aguirre, Íñigo Fermín
  • Fernández Ortega, Unai Javier
  • Olaz Moratinos, Xabier
  • Marzo Pérez, Asier
We present four technologies to deliver contactless haptic stimuli for enriching Virtual Reality (VR) experiences. The technologies are electrostatic piloerection, focused light-induced heat, electric plasma, and ultrasound; the user does not require to wear or touch any device. We describe the working principle behind each technology and how these technologies can provide new exciting sensations in VR experiences. Additionally, we showcase a VR demo experience gathering all four remote haptic stimuli along a circuit for the users to experiment with these new sensations., This research was funded by the EU Horizon 2020 research and innovation programme No 101017746 TOUCHLESS, by the European Research Consortium No 101042702 Intevol-ERC2021-STG, and by Gobierno de Navarra Fondo Europeo de Desarrollo Regional GymTar 0011-1365-2022-000085.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

LeviPrint: contactless fabrication using full acoustic trapping of elongated parts

  • Ezcurdia Aguirre, Íñigo Fermín
  • Morales González, Rafael
  • Andrade, Marco A.B.
  • Marzo Pérez, Asier
LeviPrint is a system for assembling objects in a contactless manner using acoustic levitation. We explore a set of optimum acoustic fields that enables full trapping in position and orientation of elongated objects such as sticks. We then evaluate the capabilities of different ultrasonic levitators to dynamically manipulate these elongated objects. The combination of novel optimization algorithms and levitators enable the manipulation of sticks, beads and droplets to fabricate complex objects. A system prototype composed of a robot arm and a levitator is tested for different fabrication processes. We highlight the reduction of cross-contamination and the capability of building on top of objects from different angles as well as inside closed spaces. We hope that this technique inspires novel fabrication techniques and that reaches fields such as microfabrication of electromechanical components or even in-vivo additive manufacturing., This research was funded by the EU Horizon 2020 research and innovation programme under grant agreement No 101017746 TOUCHLESS.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Comparison of experiment and simulation of ultrasonic mid-air haptic forces

  • Morales González, Rafael
  • Georgiou, Orestis
  • Marzo Pérez, Asier
  • Frier, William
Ultrasound mid-air haptics is an emerging technology with many applications in human-computer interactions. Despite great advances in related hardware and software, physics models that predict the resulting forces on a surface (e.g., someone's hand) are either too simple (inaccurate) or too complex (computationally expensive). In this paper, we show that simple models are not sufficient when predicting the force on an experimental setup involving two prototype devices and a precision scale. Specifically, we demonstrate that our experimental measurements cannot be accurately predicted using a linear acoustic model., This project has received funding from the EU Horizon 2020 research and innovation programme under grant agreement number 101017746.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

LevPet: a magnetic levitating spherical pet with affective reactions

  • Sorbet Molina, Josune
  • Elizondo Martínez, Sonia
  • Iriarte Cárdenas, Naroa
  • Ortiz Nicolás, Amalia
  • Marzo Pérez, Asier
LevPet combines affective computing and magnetic levitation to create an artificial levitating pet with affective responses and novel ways of moving to express emotions. Our interactive pet can recognise the user's emotional status using computer vision, and respond to it with a low-level empathy system based on mirroring behaviour. For example, if you approach it with a happy face, the pet will greet you and move in a nimble way. A repulsive magnetic levitator is attached to a mechanical stage controlled by a computer system. On top of it, there is the pet playground, where a house, a ping-pong ball,a xylophone and other accessories are placed. Two cameras allow to capture the user's face and the objects placed on the playground, so that the pet can interact with them. LevPet is an exploration of how to communicate internal state with only a levitating sphere; it is a platform for experimentation and an interactive demo that brings together an outer-worldly levitating metallic sphere with familiar things like emotions and a playground made of traditional items., This research was funded by the EU Horizon 2020 research and innovation programme under grant agreement No 101017746 TOUCHLESS.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

PhantomFields: fast time and spatial multiplexation of acoustic fields for generation of superresolution patterns

  • Elizondo Martínez, Sonia
  • Goñi Carnicero, Jaime
  • Galar Idoate, Mikel
  • Marzo Pérez, Asier
Ultrasonic fields generated by phased arrays can be tailored to obtain a custom pattern of acoustic radiation forces. These force fields can pattern particles as well as be felt by the human hand, enabling applications for bioprinting and contactless haptic devices. The forcé fields can be switched orders of magnitude faster than the reaction time of the particles that it pushes or the human mechanoreceptors of touch. Therefore, a quick multiplexation in time or in space of different acoustic fields will be perceived as the average field. In this paper, we optimise the non-linear problem of decomposing a target force field into several multiplexed acoustic fields. We create averaged fields, PhantomFields, that cannot be created by a regular (unique) emission of an acoustic field. We improve accuracy by time multiplexation and spatial multiplexation, i.e. quick rotation of the emitters. These processes improve the resolution and strength of the obtained fields without the requirement of new hardware, opening up applications in haptic devices and 3D printing., This project has received funding from the EU Horizon 2020 research and innovation programme under grant agreement No 101017746.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

TOUCHLESS: demonstrations of contactless haptics for affective touch

  • Chew, Sean
  • Dalsgaard, Tor-Salve
  • Maunsbach, Martin
  • Bergström, Joanna
  • Seifi, Hasti
  • Hornbæk, Kasper
  • Irisarri Erviti, Josu
  • Ezcurdia Aguirre, Íñigo Fermín
  • Iriarte Cárdenas, Naroa
  • Marzo Pérez, Asier
  • Frier, William
  • Georgiou, Orestis
  • Sheremetieva, Anna
  • Kwarciak, Kamil
  • Stroiński, Maciej
  • Hemmerling, Daria
  • Maksymenko, Mykola
  • Cataldo, Antonio
  • Obrist, Marianna
  • Haggard, Patrick
  • Subramanian, Sriram
A set of demonstrators of contactless haptic principles is described in this work. The technologies are based on electrostatic piloerection, chemical compounds and ultrasound. Additionally, applications related to affective touch are presented, ranging from storytelling to biosignal transfer, accompanied with a simple application to edit dynamic tactile patterns in an easy way. The demonstrators are the result of the Touchless project, which is a H2020 european collaborative project that integrates 3 universities and 3 companies. These demostrators are contactless haptic experiences and thus facilitate the come-and-interact paradigm, where users can approach the demo booth and directly experience the applications without having to wear devices, making the experience fast and hygienic., Funded by EU Horizon 2020 research and innovation programme grant agreement No 101017746 TOUCHLESS.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

FlexiVol: a volumetric display with an elastic diffuser to enable reach-through interaction

  • Bouzbib, Elodie Lyath
  • Sarasate Azcona, Iosune
  • Fernández Ortega, Unai Javier
  • Fernández, Suárez, Iván
  • López-Amo Ocón, Manuel
  • Ezcurdia Aguirre, Íñigo Fermín
  • Marzo Pérez, Asier
Volumetric displays render true 3D graphics without forcing users to wear headsets or glasses. However, the optical diffusers that volumetric displays employ are rigid and thus do not allow for direct interaction. FlexiVol employs elastic diffusers to allow users to reach inside the display volume to have direct interaction with true 3D content. We explored various diffuser materials in terms of visual and mechanical properties. We correct the distortions of the volumetric graphics projected on elastic oscillating diffusers and propose a design space for FlexiVol, enabling various gestures and actions through direct interaction techniques. A user study suggests that selection, docking and tracing tasks can be performed faster and more precisely using direct interaction when compared to indirect interaction with a 3D mouse. Finally, applications such as a virtual pet or landscape edition highlight the advantages of a volumetric display that supports direct interaction.s)., This research was funded by the EU Horizon 2020 research and innovation programme under grant agreement No 101017746 TOUCHLESS, and by the European Research Consortium under grant agreement No 101042702 Intevol-ERC2021-STG.