Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Tools development for the recycling of lignocellulosic biomass in yeast

  • Del Cerro, Carlos
  • Gómez-Álvarez, Helena
  • Salvachúa, Davinia
  • Camarero, Susana
  • Díaz, Eduardo
1 p.-2 fig., Syngas fermentation is a bioconversion technology of syngas/waste gas components to produce lowcarbon molecules. This technology is currently undergoing an intensive research and development phase.Acetogens (Clostridium, Eubacterium, Moorella) have been shown to ferment single carbon gases such as CO and CO2 plus H2 into chemicals (mainly acetate, ethanol, lactate or 2,3-BDO)through the acetyl-CoA pathway (Wood–Ljungdahl pathway). M. thermoacetica has great potential as microbial production platforms using syngas, because it has high growth and metabolism rates and low microbial contamination rates due to their high growth temperature. Here we describe a strategy for the gas fermentation using M. thermoacetica and a pressurized gas fermenter aimed to improve the overall reaction rate as well as the global yield of the process for the production of acetate. In a second fermentation stage, we investigated the use of acetate as main carbon source for the production of triacylglycerides (TAGs) using the oleaginous yeast Yarrowia lipolytica. This microorganism can accumulate in the form of lipid bodies, lipids of up to 60% wt/wt of their biomass. Fermentation conditions were studied at laboratory level to determine the most important parameters influencing lipid accumulation (pH, DO, C/N ratio) as well as alternative carbon sources to increase the yield of lipid production. For this purpose, not only batch and fed-batch fermentation processes but also continuous fermentations with cell recycle, fed with a diluted acetate solution,were carried out at lab scale using bench scale bioreactors of 1.5 L. The overall results showed that acetate produced from syngas can be used as promising, low-cost carbon source for growth and lipid production in Y. lipolytica, which can be further processed to obtain sustainable biofuels., This project is supported by a fellowship from the Fundación General CSIC ́s ComFuturo programme which has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101034263"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Aplicación de redes neuronales para generación de imágenes tomográficas de muros de mampostería.

  • Ortega Heras, Javier
  • Aparicio Secanellas, Sofía
  • González Hernández, Margarita
  • Anaya Velayos, José Javier
15º Congreso Nacional Ensayos No Destructivos y 2º Congreso Ibérico de Ensayos No Destructivos. 19-21 junio 2024, Valladolid (España). 10 páginas, 8 figuras, 1 tabla., Caracterizar estructuras de albañilería es una tarea compleja limitada por la necesidad de usar técnicas no invasivas para conservar el material histórico. Las técnicas actuales de prospección no destructiva que permiten investigar el interior de la albañilería histórica proporcionan una evaluación cualitativa, difícil de interpretar y requieren mucho tiempo tanto a nivel operacional como en el procesado. Por ese motivo, estas técnicas no son ampliamente utilizadas entre los profesionales en el campo de la conservación. El objetivo del artículo es explorar métodos que mejoren nuestra capacidad de producir imágenes del interior de elementos de albañilería. El enfoque es reconstruir la estructura interna de la albañilería utilizando datos de propagación de ondas acústicas. La imagen tomográfica es particularmente útil para investigar la morfología interna de elementos de albañilería. Sin embargo, los resultados son mapas de velocidad o atenuación complejos de interpretar. El artículo estudia la viabilidad de utilizar algoritmos avanzados, como las redes neuronales profundas, para mapear límites internos, detectar y clasificar defectos dentro de los elementos de albañilería directamente a partir de datos acústicos, como alternativa a la tomografía clásica (p.ej. métodos algebraicos). La aplicación de redes neuronales para generar imágenes tomográficas es un área de investigación insuficientemente explorada, especialmente para medios altamente dispersivos, como la albañilería. Entrenar modelos de aprendizaje profundo requiere grandes conjuntos de datos. Dada la dificultad para obtener datos experimentales, el artículo explora el uso de simulaciones numéricas para generar el conjunto de datos. Las simulaciones se calibraron con datos experimentales de inspecciones sónicas. Después, se desarrolló un generador aleatorio de secciones de albañilería de piedra en 2D, representativas de paredes de albañilería de piedra irregulares con dos hojas y núcleo interno. Se generaron un total de 100 secciones. Los resultados se utilizaron para entrenar algoritmos de aprendizaje profundo. El modelo entrenado es capaz de generar imágenes tomográficas de las secciones transversales. Los resultados se compararon con imágenes tomográficas generadas con algoritmos iterativos tradicionales. A pesar de los errores en la reconstrucción, el modelo mejora la interpretación de las imágenes, identificando claramente el tamaño y la ubicación del núcleo interno de mortero dentro de la sección transversal., La publicación es parte del proyecto PID2022-140071OB-C21, financiado por MCIN/AEI/10.13039/501100011033/FEDER, UE. También es apoyado por el programa de la Fundación General CSIC, ComFuturo, financiado por el programa de investigación e innovación de la Unión Europea Horizon 2020 Marie Skłodowska-Curie No. 101034263., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Sistema Automatizado de Tomografía Ultrasónica para la Inspección No Destructiva de Maquetas en Materiales de Mampostería y su Aplicación en la Conservación del Patrimonio

  • Ramonet Marques, Fernando
  • Ortega Heras, Javier
  • Aparicio Secanellas, Sofía
  • Anaya Velayos, José Javier
I Jornadas de Jóvenes Investigadores del ITEFI, 20 noviembre 2024, Madrid., La tomografía ultrasónica es una técnica no destructiva que permite obtener información detallada sobre el estado interno de materiales compuestos, como la mampostería, frecuentemente empleada en estructuras patrimoniales. Sin embargo, el análisis de las ondas acústicas en estos materiales es complejo debido a su heterogeneidad, lo que demanda sistemas de inspección precisos y automatizados. Este trabajo presenta el desarrollo de un sistema automatizado de tomografía ultrasónica diseñado para realizar pruebas experimentales en maquetas de materiales compuestos. A través de un sistema mecánico, electrónico y de software integrado, el sistema permite un control preciso sobre la emisión, recepción y análisis de ondas ultrasónicas en maquetas 3D impresas de materiales compuestos. El objetivo es facilitar la adquisición de datos experimentales con alta resolución y confiabilidad para estudios posteriores de interpretación y análisis estructural. Este sistema automatizado de tomografía ultrasónica se compone de tres módulos integrados principales: un sistema mecánico, un sistema electrónico y un módulo de software personalizado., La publicación es parte del proyecto PID2022-140071OB-C21, financiado por MCIN/AEI/10.13039/501100011033/FEDER, UE. También es apoyado por el programa de la Fundación General CSIC, ComFuturo, financiado por el programa de investigación e innovación de la Unión Europea Horizon 2020 Marie Skłodowska-Curie No. 101034263, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

CatVolc: A Comprehensive Database of Geochemical and Geochronological Data from the Catalan Volcanic Zone, Spain

  • Geyer, Adelina
  • Miranda-Muruzábal, Martin
  • Aulinas, Meritxell
  • Albert, Helena
  • Vila, Miquel
  • Fus, Micheo
  • Bolós, Xavier
  • Pedrazzi, Dario
  • Gisbert, Guillem
  • Planagumà, Llorenç
Trabajo presentado en IAVCEI Scientific Assembly, celebrada en Ginebra (Suiza) del 29 de junio al 04 de julio de 2025., The Catalan Volcanic Zone (CVZ) in northeastern Spain is an intraplate alkaline volcanic region linked to the Western Mediterranean's opening and the European Rift System's development. Volcanic activity began in L’Empordà (>12–8 Ma), progressed to La Selva (7.9–1.7 Ma), and culminated in the Garrotxa Volcanic Field (<0.7–0.01 Ma). Despite centuries of research, key aspects remain unclear, including the evolution of magma plumbing systems, ascent mechanisms, and a detailed chronology of volcanism. Addressing these gaps requires consolidated geochemical, petrological, and geochronological data, which have remained scattered and unintegrated. This study presents the CatVolc (Catalan Volcanism) database, unifying existing geochemical and geochronological data for volcanic materials in the CVZ. The database includes analyses of 405 rock samples (296 juvenile magmatic rocks, 109 xenoliths), dating data from 57 rocks, 4 paleosols, and 1 sediment sample. Each entry provides information on sampling sites, lithology, whole-rock compositions, isotopic ratios, mineral chemistry, and radiometric/thermoluminescence dating. Preliminary analyses of CatVolc reveal critical knowledge gaps and suggest future research directions. The database is essential for understanding magmatic systems and volcanic activity in the CVZ, particularly in the Garrotxa Volcanic Field, aiding volcanic hazard assessment and improving insights into potential future eruptions. This work has been developed under the financial support of the Institut Cartogràfic i Geològic de Catalunya, the Parc Natural de la Zona Volcànica de La Garrotxa, the Fundación General CSIC's ComFuturo programme and the Marie Skłodowska-Curie grant agreement No. 101034263, the collaboration grant 2021 COLAB 00367 funded by the MEFP, and the grant PID2022-139047NA-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”., This work has been developed under the financial support of the Institut Cartogràfic i Geològic de Catalunya (ICGC). HA is a Serra Húnter Lecturer Professor. XB is supported by the Fundación General CSIC‘s ComFuturo programme and the Marie Skłodowska-Curie grant agreement No. 101034263. MMM is grateful for his collaboration grant with the Department of Mineralogy, Petrology and Applied Geology of the University of Barcelona (2021 COLAB 00367) funded by the MEFP. This research has been partially funded by the grant PID2022-139047NA-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This study is part of the research activities of the Applied Volcanology Team (Geo3BCN-CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Understanding acoustic wave propagation through heterogeneous materials: numerical and experimental investigations at different scales

  • Ortega Heras, Javier
  • Ramonet Marques, Fernando
  • Aparicio Secanellas, Sofía
  • González Hernández, Margarita
  • Anaya Velayos, José Javier
Proceedings of the 14th International Conference on Structural Analysis of Historical Constructions (SAHC 2025) Lausanne, Switzerland, September 15-17, 2025 5 páginas, 5 figuras, Acoustic techniques have proven to provide essential information on the subsurface conditions of heritage structures and materials, e.g., masonry. They are fully nondestructive methods based on the emission of acoustic (ultra- sonic or sonic) waves that can penetrate through the material. The waves charac- teristics, such as velocity, can be used to image the interior of the construction elements. These images provide a qualitative assessment of the inner state of conservation of the surveyed element and can help to detect possible defects, e.g., voids or weak areas, that are not visible from the exterior. Nevertheless, the in- terpretation of such images is difficult, particularly for heterogeneous composite materials like masonry. The paper presents examples of recent investigations aimed to obtain a better understanding of the complex acoustic wave propagation phenomenon in ma- sonry elements. The phenomenon has been studied numerically and experimen- tally, at different scales. Experimental research is based on automated inspection systems, which increase speed of inspection and reduce error associated with manual measurements, while ensuring repeatability. The scale of the experi- mental work presented ranges from small scale 3D printed specimens to full scale laboratory specimens and on-site campaigns on real case studies. The research lines presented can help to overcome common limitations encoun- tered when processing acoustic data, aiming to improve our ability to interpret the results. The main objective is to use acoustic wave propagation data to pre- cisely detect, position and measure inner defects, as well as to reconstruct the masonry microstructure., The research presented is funded by the MeDeAH project PID2022-140071OB-C21, funded by MCIN/AEI/10.13039/501100011033/FEDER, EU and a fellowship from the Fundación General CSIC´s ComFuturo programme which has received funding from the European Union's Horizon 2020 research and innovation programme under the Ma- rie Skłodowska-Curie grant agreement No. 101034263, Peer reviewed