Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Enhanced Thermoelectric Performance in Sputtered Epitaxial Fe2VAl Thin Films via Crystal Orientation Selection

  • Conca, André
  • Domínguez-Vázquez, José María
  • Caballero-Calero, Olga
  • Cebollada, Alfonso
  • Martín-González, Marisol
Resumen del trabajo presentado en el 2024 MRS Spring Meeting, celebrado en Seattle (Estados Unidos), del 22 al 26 de abril de 2024 y de forma virtual del 7 al 9 de mayo de 2024, Heusler intermetallic compounds present a wide variety of compositions that fulfill the requirement of avoiding toxic or scarce elements. The Fe<sub>2</sub>VAl family of Heusler alloys shows a large potential and versatility for thermoelectric thin films with tunable properties via doping with additional elements such as Ti, Ta, Si, W, and others [1-3]. The doping allows the fabrication of p- and n-type alloys in the same family, which simplifies future thermoelectric device fabrication. While the undoped alloy Fe<sub>2</sub>VAl is a p-type material, the introduction of W, Si, or Ta results in a n-type one. P-type alloys are obtained with Ti and Zr, both with an increase in Seebeck values compared to the undoped case. The addition of these materials can also be performed in an off-stoichiometric manner [4,5].<br/>Sputter deposition is a well-established, inexpensive, and very versatile technique for the fabrication of a wide variety of material systems. The chemical composition can be highly controlled by the simultaneous use of several magnetrons with different elements (codeposition) to achieve the desired film content or doping concentration, which is needed to optimize the thermoelectric properties [6].<br/>From a fundamental point of view, the possibility to explore the influence of crystal orientation on thermoelectric performance is very appealing, offering a perfect scope for experiment versus theory comparison. In this sense, physical vapor deposition techniques are excellent tools for obtaining thin films with desired orientations through the use of adequate substrates in terms of crystal symmetry and lattice match. In this contribution, we present results on Fe<sub>2</sub>VAl thin films fabricated by magnetron dc sputtering. Two different sample series have been prepared with varying deposition temperatures (RT-950°C) and with two different substrates and, consequently, two crystalline orientations owing to the different epitaxial relations. Films grown on MgO (100) are (100)-oriented, while Al<sub>2</sub>O<sub>3</sub> (11-20) substrates induce a (110) orientation. In both cases, the (111) diffraction peak Fe<sub>2</sub>VAl corresponding to the L21 fully ordered phase can be observed in asymmetric configuration diffraction measurements.<br/>The results of the characterization of the thin films with X-Ray Diffraction and SEM imaging are shown, proving epitaxial growth for both series. The electric conductivity, Seebeck parameter, and power factor are reported. We observe a large difference in the thermoelectric performance depending on the growth orientation of the films.<br/>With these results, we prove the large potential of sputtering to produce high-quality Fe<sub>2</sub>VAl films ready for further desired compositional variation and tuned doping via codeposition., Financial support by the Ministerio de Ciencia e Innovación with the ThermHeus (TED2021-131746B-I00) project and the ERC Advanced Grant POWERbyU (ERC-2021-ADG-101052603) is acknowledged. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Thermoelectric efficiency of sputtered epitaxial Fe2VAI (100) and (110) thin films

  • Domínguez-Vázquez, José María
  • Lohani, Ketan
  • Caballero-Calero, Olga
  • Cebollada, Alfonso
  • Martín-González, Marisol
Resumen del trabajo presentado en la 40th International and 20th European Thermoelectric Conference (ICT/ECT 2024), celebrada en Cracovia (Polonia), del 30 de junio al 4 de julio de 2024, Fe2VAl is a family of full Heusler alloys that has attracted considerable interest due to its large potential and tunable thermoelectric properties via doping with elements such as W, Ti, or Si [1-2], or self-substitution with Fe, V, or Al [3]. Doping allows the alloy to alternate between p and n types, paving the way toward device fabrication and, in specific cases, resulting in a significant increase in thermoelectric performance [4]. Magnetron sputtering is a highly convenient technique for the fabrication of semiconducting thin films, owing to its versatility of materials, cost-effectiveness, and industry-friendly characteristics. In a codeposition configuration, the composition of the synthesized materials can be easily tuned to optimize material concentration for thermoelectric applications [5]. Besides doping, other parameters like crystal orientation may influence their thermoelectric properties, for example, via changes in electronic structure or grain morphology and size. Therefore, depositing monocrystalline thin films with different crystal orientations using adequate substrates is of great interest. In this work, we present experimental results of Fe2VAl thin films grown by magnetron sputtering from a Fe2VAl target at temperatures ranging from RT to 950ºC, on Al2O3 (1 1 -2 0), and on MgO (1 0 0) substrates, exhibiting different epitaxial relations and, therefore, different crystalline orientations ((1 1 0) and (1 0 0) respectively). In both series, for growth temperatures exceeding 850ºC, the (1 1 1) diffraction peak is observed, confirming the attainment of the L21 fully ordered phase while the disordered B2 phase is obtained at lower temperatures. The film’s structural characterization shows, for both series, epitaxial growth and a change in phase and morphology when higher deposition temperatures are used. Electrical conductivity, charge carrier concentration, Seebeck coefficient, and power factor were measured, observing a significant enhancement in thermoelectric performance for films with L21 phase with respect to those with B2 phase, with differences as a function of crystalline orientation that might be attributed to differences in the granular structure., Financial support by the Ministerio de Ciencia e Innovación with the ThermHeus (TED2021- 131746B-I00) project and the ERC Advanced Grant POWERbyU (ERC-2021-ADG-101052603) are acknowledged. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and the EU (FEDER, FSE).