Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

How the spatial resolution can affect the quality of mosaics and assessment of optimum number of tie points necessary to obtain good quality images

  • Gómez-Candón, David
  • Labbé, Sylvain
  • Jurado-Expósito, Montserrat
  • Peña Barragán, José Manuel
  • Rabatel, Gilles
  • López Granados, Francisca
Ponencia presentada en la First International Workshop On Robotics And Associated High Technologies And Equipment For Agriculture, celebrado en Montpellier (Francia) el 9 de septiembre de 2011., Orthorectification and mosaicing are two important steps in the design of input application strategies for precision agriculture. Images with low spatial resolution and big georreferencing errors are not useful to obtain good quality maps. In this paper we tried to compare the usefulness between two different pieces of software for orthorectificacion and mosaicing of remote images. Furthermore, we studied the spatial resolution requirements and minimum number of tie points/GCPs needed to obtain good quality orthomosaics. These orthomosaics have to be ready to be used to detect weeds in crops and to obtain high precision prescription maps., The research leading to these results has received funding from the European Union’s Seventh Framework Programme [FP7/2007-2013] under Grant Agreement nº 245986., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Application of the Dempster-Shafer theory to classify monocot and dicot weeds based on geometric shape descriptors

  • Herrera Caro, Pedro Javier
  • Dorado, José
  • Ribeiro Seijas, Ángela
An important objective in weed management is the discrimination between monocots and dicots, because these two types of weeds can be controlled more appropriately by specific herbicides. Monocot and dicot weeds differ in morphological characteristics such as the shape of leaves and stems. For this reason, the regions¿ structure belonging to weed classes plays a key role in the proposed discrimination process. Thus six geometric shaped descriptors were used as attributes to describe each isolated region in an image. Based on these attributes, this work established a strategy where the decision was taken by a classifier adapted from the Dempster-Shafer theory. Outdoor field images, taken under varying conditions of lighting, were used to test the proposal performance. This methodology based on distinguishing two types of weeds can be extrapolated to any situation where monocots and dicots are present, e.g. to discriminate between maize, a monocot crop, and dicot weeds., This research was partly financed by the Spanish Ministry of Economy and Competition (AGL2011-30442-C02-02 project) and by the 7th Framework Programme of the European Union under the Grand Agreement CP-IP245986-2 (RHEA project). Research of Dr. Herrera was supported by the JAE-Doc Program, financed by the Spanish National Research Council (CSIC) and the European Social Fund (ESF)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Discriminación entre tipos de malas hierbas: monocotiledóneas y dicotiledóneas, Discrimination between types of weeds: monocots and dicots

  • Herrera Caro, Pedro Javier
  • Dorado, José
  • Ribeiro Seijas, Ángela
Póster divulgativo de la actividad realizada en el proyecto RHEA del Séptimo Programa Marco de la Unión Europea (NMP2-LA-2010-245986) http://www.rhea-project.eu/, An important objective in weed management is the discrimination between grasses (monocots) and broadleaf weeds (dicots), since these two weed groups can be appropriately controlled by specific herbicides. In fact, efficiency is higher if site-specific treatments with selective herbicides for each type of infestation are applied instead of using a single broadcast herbicide on the whole surface. A novel approach of discrimination between monocot and dicot weeds uses outdoor field images under varying conditions of lighting obtained from a conventional camera, which are characterized by the combination of the seven Hu moments and a set of fuzzy decision-making methods. The proposed combined strategy works properly when the weeds present an early stage of growth, which coincides with the right timing for herbicide application., Funded by the European Union’s Seventh Framework Programme (NMP2-LA-2010-245986)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Real-time image processing for crop/weed discrimination in wide-row crops

  • Bengochea-Guevara, José M.
  • Burgos Artizzu, Xavier P.
  • Ribeiro Seijas, Ángela
Accurate information about a crop is needed to apply a precision treatment to it as well as to perform other agricultural tasks. To achieve site-specific management of weeds, the first and most important step is the location and density estimation of weeds. In this context, the development of computer vision methods for real-time weed detection can be highly useful in the construction of fully automatic devices for weed control. This paper presents a visual method that discriminates between crop rows and weeds in wide-row crops, working in real time with the images acquired from a conventional camera on board a tractor and under uncontrolled lighting and movement conditions., This project has received funding from the European Union’s Seventh Framework Programme for research, technological development and demonstration under grant agreement no 245986, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Effective supervision of a tractor fleet

  • Conesa-Muñoz, Jesús
  • Emmi, Luis Alfredo
  • González-de-Soto, Mariano
  • Ribeiro Seijas, Ángela
This paper describes a supervisor system to monitor automated agricultural vehicles. The supervision system consists of a program that gathers and analyzes, continuously and in real time, the information provided by subsystems on board the vehicles, and notifies the user when it detects a failure, such as an inappropriate working speed or the wrong valve state. To develop this system, a modular and hierarchical architecture is proposed and used. Simple low level supervisors, only able to detect easy failures in small systems, are combined to build more complex, higher level supervisors able to detect more complex problems. The system was tested with automated tractors during the execution of a real agricultural task, spraying herbicide for selective weed treatment. The system successfully supervised the task, detecting the failures that arose. According to these results, it is concluded that the system proposed is a highly useful tool to manage fleets of agricultural vehicles, The Spanish Ministry of Economy and Competitiveness and the European Union have provided full and continuing support for this research work through projects: PLAN NACIONAL - AGL2011 - 30442 - C02 – 02 (GroW) and NMP-CP-IP 245986-2 RHEA., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Integrating autonomous aerial scouting with autonomous ground actuation to reduce chemical pollution on crop soil

  • Conesa-Muñoz, Jesús
  • Valente, João
  • Cerro, Jaime del
  • Barrientos, Antonio
  • Ribeiro Seijas, Ángela
Accepted English written contributions will be published at Springer Series in Advances in Intelligent Systems and Computing, Many environmental problems cover large areas, often in rough ter-rain constrained by natural obstacles, which makes intervention difficult. New technologies, such as unmanned aerial units, may help to address this issue. Due to their suitability to access and easily cover large areas, unmanned aerial units may be used to inspect the terrain and make a first assessment of the affected areas; however, these platforms do not currently have the capability to imple-ment intervention. This paper proposes integrating autonomous aerial inspection with ground intervention to address environmental problems. Aerial units may be used to easily obtain relevant data about the environment, and ground units may use this information to perform the intervention more efficiently. Furthermore, an overall system to manage these combined missions, com-posed of aerial inspections and ground interventions performed by autonomous robots, is proposed and implemented. The approach was tested on an agricultural scenario, in which the weeds in a crop had to be killed by spraying herbicide on them. The scenario was ad-dressed using a real mixed fleet composed of drones and tractors. The drones were used to inspect the field and to detect weeds and to provide the tractors the exact coordinates to only spray the weeds. This aerial and ground mission col-laboration may save a large amount of herbicide and hence significantly reduce the environmental pollution and the treatment cost, considering the results of several research works that conclude that actual extensive crops are affected by less than a 40% of weed in the worst cases., This project was funded in part by the 7Th Framework Pro-gramme of the European Union under Grant Agreement No. 245986. The authors recognise the following RHEA beneficiaries: CSIC (Spain), CogVis (Austria), FTW (Austria), Cyberbotics (Switzerland), University of Pisa (Italy), University Complutense of Madrid (Spain), Tropical (Greece), AGROSAP (Spain), Polytechnic Uni-versity of Madrid (Spain), AirRobot (Germany), University of Florence (Italy), IRSTEA (France), CNH (Belgium), Bluebotics (Switzerland) and CM (Italy)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Detección y tratamiento preciso de malas hierbas con una flota de robots autónomos aéreos y terrestres, Detection and accurate treatment of weeds with a fleet of autonomous aerial and ground robots

  • Ribeiro Seijas, Ángela
  • Fernández-Quintanilla, César
  • Dorado, José
  • López Granados, Francisca
  • Pérez Ruiz, Manuel
  • Agüera, Juan
  • González-de-Santos, Pablo
Trabajo presentado en el XV Congreso de la Sociedad Española de Malherbologia (SEMh), celebrado en Sevilla del 19 al 22 de octubre de 2015., The RHEA project (Robot Fleets for Highly Effective Agriculture and Forestry Management) funded by the 7th EC Framework Programme focused on the design, development and assess of a new generation of automated and robotic systems for both chemical and physical management of pests including weed control. RHEA addressed the crop treatments by a reconfigurable fleet of robots composed by unmanned aerial vehicles (UAV) and unmanned ground vehicles (UGV) equipped with advanced perception systems, intelligent implement and enhanced decision-making algorithms. This paper describes important aspects of the RHEA architecture and details the trials conducted at the Experimental Farm La Poveda (Madrid) where over 97% of the weed infested areas in two wheat crops were treated by the described system., El proyecto RHEA (Robot Fleets for Highly Effective Agriculture and Forestry Management) financiado por el 7º Programa Marco de la Comisión Europea, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Using a fleet of robots for patch spraying

  • Fernández-Quintanilla, César
  • Dorado, José
  • Ribeiro Seijas, Ángela
  • López Granados, Francisca
  • Rabatel, Gilles
  • Pérez Ruiz, Manuel
  • González-de-Santos, Pablo
17th European Weed Research Society Symposium. "Weed management in changing environments", 23-26 June 2015, Montpellier, France, Advanced technologies are essential for safe and efficient weed control. Using autonomous mobile platforms (both, ground and aerial) equipped with innovative perception techniques, data processing systems and tools for actuation makes possible to control weeds site-specifically, reducing costs, environmental damages and risks for farmers. From 2011 to 2014 the RHEA Project, funded by the EU 7th Framework Programme, has been involved in the configuration of a new generation of robotic systems for both chemical and physical management of weeds. This article summarizes the RHEA fleet of robots and analyzes the results achieved on the specific case of patch spraying winter wheat crops. The project has tackled two kinds of missions: (1) an inspection mission, made by aerial units which carry the remote perception system; and (2) a treatment mission performed by ground units equipped with the spraying system. The aerial units were hex-rotor Unmanned Aerial Vehicles (UAVs or “drones”) equipped with two DP2 Merril cameras. In one of these cameras the NIR blocking filter was removed in order to turn it into a NIR camera. This solution was able to supply a high image quality (around 446 × 106 pixels) with low-price equipment. The ground mobile units (GMUs) were based on three Boomer-3050 tractors (Case New Holland) tuned to host the onboard computer, the communication equipment, the GPS (RTK) receiver and the GMU controller. Other elements integrated into the vehicles were a camera system, a laser and GPS and communication antennas. The GMUs were carrying a sprayer with a 200L water tank and a 50L herbicide tank connected to a direct injection system to directly inject the chemicals into 12 solenoid nozzles activated independently and located on a 6m boom. The whole operation of the fleet (three GMUs and aerial vehicles) was controlled from an external Base Station equipped with a Mission Manager system and communication systems. In January and May 2014 two assessment trials were conducted in the CSIC Experimental Farm located close to Madrid (Spain), using two winter wheat fields. The assessments included the evaluation of the precision of the spraying operation, of the GMUs trajectories and the fleet integration. Regarding the accuracy of spraying herbicide, over 97% of the target area (weed patches) was sprayed. Slight delays in the opening and closing of the nozzles and some border errors were observed. The trajectory followed by the ground units barely deviated from the defined route plan pointing out high accuracy, deviating from the planned route less than 7cm (i.e., mean deviation) in the two tests performed. Regarding the evaluation of the fleet integration, the results showed that all three GMUs were able to work together cooperatively following pre-defined route plans., RHEA Project, funded by the EU 7th Framework Programme, European Commission, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Comparing visible and color-infrared UAV imagery for early-season weed mapping: The case of maize a wide row crop

  • Peña, José María
  • Torres-Sánchez, Jorge
  • Castro, Ana Isabel de
  • Serrano Pérez, Angélica
  • López Granados, Francisca
Trabajo presentado en la RHEA-2014 Second International Conference on Robotics and associated High-technologies and Equipment for Agriculture and forestry (New trends in mobile robotics, perception and actuation for agriculture and forestry), celebrada en Madrid del 21 al 23 de mayo de 2014.-- Edited by Pablo Gonzalez-de-Santos and Angela Ribeiro, This investigation quantified the efficacy of visible and color-infrared images for weed mapping in a maize field by using remote images captured with an unmanned aerial vehicle at several flight altitudes (from 40 to 100 m). Results on weed discrimination were significantly affected by type of image and by type of weed (broad-leaved or grass weeds). With independence on spatial resolution (i.e., flight altitude), weed coverage was underestimated in the visible images, mostly in the parts of the field infested with grass weeds. On the contrary, analysis done with the color-infrared images was highly precise in the images captured at 40-m flight altitude, although progressively overestimated weed coverage at higher altitude., This research was partly financed by the AGL Project (Spanish Ministry of Economy and Competition and FEDER Funds, ref.: AGL2011-30442-CO2-01), the TOAS Project (EU-7th Frame Program, ref.: FP7-PEOPLE-2011-CIG-293991) and the RHEA project (EU-7th Frame Program, ref: NMP-CP-IP 245986-2). Research of Dr. de Castro and Mr. Torres-Sánchez was financed by JAEPre and FPI Programs, respectively., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Generating UAV accurate ortho-mosaicked images using a six-band multispectral camera arrangement

  • Mesas-Carrascosa, Francisco Javier
  • Torres-Sánchez, Jorge
  • Peña, José María
  • García-Ferrer, Alfonso
  • Castillejo González, Isabel L.
  • López Granados, Francisca
Trabajo presentado en la RHEA-2014 Second International Conference on Robotics and associated High-technologies and Equipment for Agriculture and forestry (New trends in mobile robotics, perception and actuation for agriculture and forestry), celebrada en Madrid del 21 al 23 de mayo de 2014.-- Edited by Pablo Gonzalez-de-Santos and Angela Ribeiro., Site-specific weed management in a very early phenological stage of crop and weed plants requires the ultra-high spatial resolution imagery provided by unmanned aerial vehicles (UAV) flying at low altitudes. These UAV images cannot cover the whole field, resulting in the need to take a sequence or series of multiple overlapped (end-lap and side-lap) images. As consequence, a large number of UAV images are acquired for each plot. These multiple overlapped images must be oriented by calculating the bundle adjustment and ortho-rectified throughout an aerial-triangulation procedure to create an accurately georeferenced ortho-mosaicked image of the entire field. As the spatial accuracy of ortho-mosaicked image is mainly dependent on camera calibration and percentage of overlapping, this paper describes the effect of flight parameters and sensor arrangement using an UAV flying at 30 m altitude and six-band multispectral camera (miniature camera array composed of a master channel and five more channels or bands) on the workflow of the mosaicking process. The objective is to develop a procedure to generate an accurate ortho-image. This procedure would be then used in multispectral UAV imagery taken on crops for weed seedling mapping. The main phases of UAV workflow were: sensor calibration, mission planning, UAV flight and processing images. Regarding the sensor calibration, six different geometric calibrations were calculated, one for each image registered corresponding to every band. Referring to mission planning, two end-lap and side-lap settings (60%-30% and 70%-40%) were considered. Calibration and image overlapping are related to the flight duration and accuracy resolving aerial-triangulation. Different aerialtriangulations were calculated for different scenarios taken into account several combinations of calibrations and the overlapping values. The spatial accuracy of the different generated ortho-mosaicked images using both overlapping values and calibration were evaluated by the ASPRS (American Society for Photogrammetry and Remote Sensing) test. The results showed that the best setting of flight to keep the spatial accuracy in the bundle adjustment was 40- 70% overlapping and using the master channel for the aero-triangulation and its own calibration parameters. Generally, high values of end-lap and side-lap improved the accuracy of block photogrammetric adjustment, although they increased the flight length and decreased the area overflow. In addition, the framework to process and mosaic the images taken by this type of sensor was defined., This research was partly financed by TOAS (ref.: PEOPLE-2011-CIG-293991, EC-7th Frame Program) and AGL2011-30442-CO2-01 (MINECO-FEDER Funds) Projects. Research of Mr. Torres-Sánchez and Dr. José M. Peña were financed by FPI Program (MINECO funds) and RHEA Project (NMP-CP-IP 245986-2, EC-7th Frame Program), respectively., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Multitemporal weed mapping using UAV imagery for early site-specific control: the case of wheat as a narrow row crop.

  • Torres-Sánchez, Jorge
  • López Granados, Francisca
  • Castro, Ana Isabel de
  • Peña, José María
Trabajo presentado en la RHEA-2014 Second International Conference on Robotics and associated High-technologies and Equipment for Agriculture and forestry (New trends in mobile robotics, perception and actuation for agriculture and forestry), celebrada en Madrid del 21 al 23 de mayo de 2014.-- Edited by Pablo Gonzalez-de-Santos and Angela Ribeiro., Obtaining weed patch maps for herbaceous crops in early season for site-specific weed control using remote sensing techniques has been a major challenge due to their spectral and appearance similarities. This is particularly problematic in the case of narrow row crops as wheat, where the weed discrimination has to be undertaken in a short time window for a timely postemergence control, and using images with better resolution than the usually provided by remote platforms such as satellite and conventional aircrafts. Nowadays, the utilization of ultra-high resolution images captured by Unmanned Aerial Vehicles (UAV) has opened the door to the generation of weeds and treatment maps. This article describes the complete workflow developed to achieve the weed patch mapping in a wheat field, as paradigm of narrow row crops. An UAV flying at different altitudes and dates was used in order to determine the best spatial resolution and wheat-weeds growth stage to successfully reach our objective. Main steps of the workflow are as follows: 1) configuration of the UAV flights to acquire a set of overlapped imagery; 2) mosaicking of these images to create a georeferenced ortho-image of the whole crop field; 3) automatic object-based image analysis (OBIA) procedure developed for generating weed patch maps. The UAV was equipped with a commercial camera which provided images in the visible range of the spectra. The vehicle was programmed to overflow automatically a wheat field naturally infested by a grass weed, and to trigger the camera at the moment required to supply images with a previously fixed overlapping between them. Then, overlapped images were mosaicked to create an accurate georeferenced orthoimage of the entire crop field. At last, the mosaicked image was analyzed using a robust and completely automatic OBIA procedure developed by our research group. The OBIA analysis algorithm combines object-based features such as spectral, position, orientation and hierarchical relationships, and consists of three consecutive phases: 1) discrimination of crop rows by application of a dynamic and auto-adaptive classification approach, 2) discrimination of weeds on the basis of their relative positions with reference to the crop rows, and 3) generation of a weed patch map in a grid structure for a further use in early sitespecific weed control. The effect of ortho-image spatial resolution (ranging from 1 cm to 3.5 cm) and wheat-weeds growth stage on the workflow performance using OBIA was studied for the different flight altitudes and dates., This research was partly financed by Projects TOAS (Marie Curie Program, ref.: FP7- PEOPLE-2011-CIG-293991, EU-7th Frame Program) and RHEA (NMP-CP-IP 245986-2, EU-7th Frame Program). Research of Mr. Torres-Sánchez, Dr. Peña- Barragán and Dr. de Castro was financed by FPI, JAEDoc and JAEPre Programs, respectively., No
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

On the acquisition of high-resolution maps with open source software and commercials off-the-shelf quad-rotors

  • Pereira Valente, Joao Ricardo
  • Guillén, Adrián
  • Manrique, Óscar
  • Arenal, Mercedes
  • Barrientos Cruz, Antonio|||0000-0003-1691-3907
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

What is the optimal stitching orientation from an aerial survey perspective?

  • Valente, Joao
  • Cerro Giner, Jaime del|||0000-0003-4893-2571
  • Barrientos Cruz, Antonio|||0000-0003-1691-3907
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Flota de vehículos aéreos para fotografía de alta resolución en aplicaciones de agricultura de precisión. Proyecto RHEA.

  • Cerro Giner, Jaime del|||0000-0003-4893-2571
  • Sanz Muñoz, David
  • Valente, João
  • Rossi, Claudio|||0000-0002-8740-2453
  • Cancar, Leandro
  • Barrientos Cruz, Antonio|||0000-0003-1691-3907
Archivo Digital UPM
Publication Contribución de congreso (ConferenceOutput)

Integrating Autonomous Aerial Scouting with Autonomous Ground Actuation to Reduce Chemical Pollution on Crop Soil

  • Conesa Muñoz, Jesús
  • Pereira Valente, Joao Ricardo
  • Cerro Giner, Jaime Del|||0000-0003-4893-2571
  • Barrientos Cruz, Antonio|||0000-0003-1691-3907
  • Ribeiro Seijas, Ángela Mª|||0000-0001-5807-8132