Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Liquid CO2 Injection For Geological Storage In Deep Saline Aquifers

  • Rötting, Tobias
  • Carrera, Jesús
  • Vilarrasa, Víctor
  • Silva, Orlando
  • Olivella, Sebastià
Póster presentado en la 7th Trondheim Conference on CO2 Capture, Transport and Storage, celebrada en Trondheim (Noruega) del 4 al 6 de junio de 2013., It is usually assumed that CO2 for geological storage should be injected in supercritical (SC) state (i.e. p>7.382 MPa and T>31.04 ºC) to avoid thermal stresses or phase changes in the injection tubing or in the formation. Injecting CO2 in liquid phase would be desirable because its density is much larger than that of either gaseous or supercritical CO2. Since most of the wellhead pressure is required for overcoming buoyancy forces in the wellbore, increasing density in the wellbore translates into a parallel reduction of the required wellhead pressure. Yet, most projects contemplate injection in either SC or gaseous phase because of concerns about (1) phase changes in the wellbore, or (2) thermal stresses in the reservoir caused by the injection of CO2 much colder than the reservoir. We perform numerical simulations to analyze the thermodynamic evolution of CO2 and the thermo-hydro-mechanical response of the formation and the caprock to liquid CO2 injection. We find that injecting CO2 in liquid state is energetically more efficient than in SC state because liquid CO2 is denser than SC CO2, leading to a lower overpressure not only at the wellhead, but also in the reservoir because a smaller fluid volume is displaced. Cold CO2 injection cools down the formation around the injection well. Further away, CO2 equilibrates thermally with the medium in an abrupt front. A slight temperature increase occurs in the SC CO2 region that is due to the exothermal dissolution of CO2 into the brine. The liquid CO2 region close to the injection well advances far behind the SC CO2 interface. While the SC CO2 region is dominated by gravity override, the liquid CO2 region displays a steeper front because viscous forces dominate (liquid CO2 is not only denser, but also more viscous than SC CO2). The temperature decrease close to the injection well induces a stress reduction due to thermal contraction of the media. This can lead to shear slip of pre-existing fractures in the aquifer for large temperature contrasts in stiff rocks, which could enhance injectivity. In contrast, the mobilized friction angle in the seals is not increased when injecting liquid CO2 and it is even reduced in stress regimes where the maximum principal stress is the vertical. We conclude that injecting CO2 in liquid state rather than SC is favourable for several reasons: (1) this injection strategy is energetically advantageous, (2) no transformation operation or only low energy consumption conditioning operations are necessary, (3) a smaller compression work at the wellhead is necessary because of the smaller compressibility of liquid CO2, (4) since liquid CO2 is denser than SC CO2, liquid CO2 injection induces a lower overpressure also at within the aquifer because a smaller amount of fluid is displaced and (5) the caprock mechanical stability is improved., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A Dissolved CO2 injection system to reduce geological and capture requeriments of CCS

  • Carrera, Jesús
  • Silva, Orlando
  • Pool, María
  • Rötting, Tobias
Póster presentado en la 7th Trondheim Conference on CO2 Capture, Transport and Storage, celebrada en Trondheim (Noruega) del 4 al 6 de junio de 2013., The two worst technological hurdles for industrial deployment of CO2 storage in deep saline aquifers are the high cost of capture and geological uncertainties. The latter refer to the need for a deep, high porosity, reasonably permeable and extensive salt water layer, capped by an equally extensive very low permeability layer in a tectonically stable region. Here, we propose an alternative storage approach to alleviate these concerns that consists of extracting brine from the storage formation and then re-injecting it together with CO2 so that they mix at depth in the well and this CO2-saturated brine flows into the storage formation. Geomechanical stability and caprock integrity are favoured because pressure build-up is reduced due to pumping. In fact, a caprock is not required because CO2 rich brine is denser than native brine and will tend to sink in the aquifer, which eliminates the risk of buoyant escape of CO2 because. Moreover, the concept does not require CO2 to be pure. In fact, theoretically, it can be used directly for flue gas without capture. While this would imply a huge increase in compression costs, the design incorporates a system to recover the pressure of the low solubility components that return to the wellhead. This, together with the thermal energy obtained from the extracted brine, ensures a high energy efficiency. The only drawback of the system is its modest use of pore space (some 2-3 %, in the case of pure CO2, depending on heterogeneity, temperature and salinity). The method is particularly favorable when the aquifer dips, because locating the extraction well upslope can ensure a very long operation without CO2 ever breaking through into the extraction well. We describe the system in detail and present variable density flow 3D numerical simulations to evaluate the parameters which play a major role in the degree of success and efficiency of this storage strategy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Characterization of transport parameters during limestone dissolution experiments

  • Luquot, Linda
  • Rötting, Tobias
  • Casalinuovo, Diosenia
  • Carrera, Jesús
Póster presentado en la European Geosciences Union General Assembly, celebrada en Viena del 7 al 12 de abril de 2013., CO2 sequestration in deep geological formation is considered an option to reduce CO2 emissions in the atmosphere. After injection the CO2 will slowly dissolve into the pore water producing low pH fluids with a high capacity for dissolving carbonates. Limestone rock dissolution induces geometrical parameters changes such as porosity, pore size distribution, or tortuosity which may consequently modify transport properties (permeability, diffusion coefficient). Characterizing these changes is essential for modelling flow and CO2 transport during and after the CO2 injection. Indeed, these changes can affect the storage capacity and injectivity of the formation. Very few published studies evaluate the transport properties changes (porosity, permeability, pore size distribution, diffusion coefficient) due to fluid-rock interactions. Here we report experimental results from the injection of acidic fluid into limestone core samples of 25.4 mm diameter, 12.5 mm length. Experiments were realized at room temperature. Before and after each acidic rock attack, we measure the sample porosity, the diffusion coefficient and the pore size distribution. During percolation experiments, the permeability changes are recorded and chemical samples taken to evaluate calcite dissolution. Several dissolution-characterization cycles are performed on each sample in order to study the evolution and relation of the different parameters. These experiments show that far from the well injection site (i.e. intermediate pH solution (4-5)), dissolution processes are characterized by slow mass transfers. We measure a permeability decrease during the different experiments. Nevertheless, we observed a porosity increase in the sample inlet with higher pore diameters. In the opposite, we measured smaller pore sizes near the core sample outlets. These results indicate that some fine particles move from the sample inlet towards the outlet. Due to the low fluid acidity, these fine particles are not dissolved inside the samples and are transported inside. Consequently, these particles can locally clog the porous space and decrease the permeability. Such processes can decrease the CO2 storage capacity and pore volume accessibility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Experimental study of the hydrogeochemical properties of the Hontomin cap rock under CO2 supercritical conditions

  • Cama, Jordi
  • Soler, Josep M.
  • Dávila, Gabriela
  • Luquot, Linda
Póster presentado en la European Geosciences Union General Assembly, celebrada en Viena del 7 al 12 de abril de 2013., The main cap rock for CO2 injection at the PDT Hontomin site (Spain) is a marly shale made up of calcite (56 %), quartz (21%), illite (17%) clinochlore (3%) and others (albite, gypsum, anhydrite, pyrite) ( 3%). Contact with CO2-rich acid brines may induce the dissolution of these minerals. Since the brine contains sulfate, gypsum (or anhydrite at depth) may precipitate, which may coat the surface of the dissolving calcite grains and cause their passivation. These mineral reactions will also induce changes in porosity and permeability. Percolation laboratory experiments with Hontomin shale rock cores under controlled pCO2 (8 MPa) are being performed to quantify these processes. In mechanically fractured cores (7.5 mm in diameter and 18 mm in length), two synthetic brines (a sulfatefree solution and a version of the Hontomin formation brine (sulfate solution)) were injected into the rock at constant flow rates (0.2, 1 and 60 mL/h) under CO2 supercritical conditions (pCO2 = 8 MPa and T = 60 C). As the pH of the injecting brines in equilibrium with a pCO2 of 8 MPa is acidic ( 3), it was observed that in the case of the sulfate-free brine experiments, the main processes that yield variation in the hydrodynamic behavior of the fractured rock was the dissolution of calcite, Si-bearing minerals, clinochlore and pyrite. In the sulfate-rich brine experiments, the dissolution of calcite and Si-bearing minerals also occurred, together with gypsum precipitation in the experiments run at low flow rates. As a result, initial fracture permeability tends (i) to stabilize or increase when the cap rock interacts with the sulfate-free brine and (ii) to decrease as the rock interacts with the sulfate-rich brine. The interpretation (reactive transport modeling) of the changes in mineralogy and solution composition, together with the analysis of the changes in physical properties (porosity and permeability), will provide valuable information (e.g., kinetic parameters such as mineral surface area) required in the performance assessment of a CO2 sequestration plant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A fractal model to describe the evolution of multiphase hydraulic properties during mineral dissolution

  • Rötting, Tobias
  • Guarracino, Luis
  • Carrera, Jesús
  • Luquot, Linda
  • Casalinuovo, Diosenia
Póster presentado en la European Geosciences Union General Assembly, celebrada en Viena del 7 al 12 de abril de 2013., In this study we present a physically-based theoretical model for describing the temporal evolution of porosity, saturated and relative permeability, water content relation and diffusion coefficient during rock dissolution by reactive fluids. These processes play an important role in many vadose zone and multiphase flow processes, such as the geological storage of carbon dioxide, enhanced oil or gas recovery, flow and transport in unsaturated soil, geothermal systems, etc. The derivation of the model is based on the assumption that the porosity of the rock can be represented by a group of parallel capillary tubes with a fractal cumulative size distribution. Using this fractal description and known physical properties we obtain analytical expressions that depend only on the minimum and maximum pore radii, the size of the representative elemental volume and the fractal dimensions of porosity and tortuosity, but do not need any other fitting parameters. By assuming periodic fluctuations in the radius of the pores, it is possible to represent hysteresis in the water content relation and in the relative permeability function. Finally, assuming a constant dissolution reaction it is possible to derive closed-form analytical expressions for porosity, water content relation, saturated and relative permeability and diffusion that depend explicitly on time. The temporal evolution predicted by the proposed model is compared with laboratory data obtained on calcite and dolomite rocks., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

CO2 injection along a pipeline with transient approach

  • Bezos, Víctor
  • Carrera, Jesús
  • Slooten, Luit Jan
  • Silva, Orlando
  • Bear, Jacob
  • Kitro-Belinkov, Myra
Póster presentado en la European Geosciences Union General Assembly, celebrada en Viena del 7 al 12 de abril de 2013., CO2 geological sequestration involves several processes. One of the more relevant of these processes is the CO2 injection along a pipeline, because it links the capture and transport of CO2 with its deep geological storage. The knowledge of the CO2 behavior within injection and monitoring wells is essential for designing efficient CO2 storage strategies. In particular, a thorough modeling and simulation of CO2 flow through the injection pipe is required to define operational protocols and to design the surface CO2 conditioning facilities. Much work has been performed on modeling the steady state multiphase flow in wellbores during CO2 injection. However, relevant problems, including the displacement of the initial brine in the injection well, or the upwards flow of CO2 during a push-pull test, require the modeling of transient conditions, which is the goal of the present work. Here, we present the governing equations and preliminary results for the modeling of dynamic non isothermal CO2 flow through an injection well, including displacement of the initial brine. The model considers continuity, momentum and energy equations, together with equations of state and some thermodynamic relations. These equations are solved using the simulation framework “Proost”, which implements the finite element method. The code is verified by comparison with a steady-state solver for a range of surface injection conditions. The results obtained show pressure, velocity and temperature evolution, which allows quantifying the phase changes that gradually experiment the CO2 through the injection pipe. We find the surface pressure required initially is much higher than steady-state because heat exchange with the formation reduces significantly the density of CO2 at the borehole., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Characterization of transport parameters during limestone dissolution experiments

  • Luquot, Linda
  • Rötting, Tobias
  • Casalinuovo, Diosenia
  • Carrera, Jesús
Póster presentado en la American Geophysical Union Fall Meeting, celebrada en San Francisco del 3 al 7 de diciembre de 2012., CO2 sequestration in deep geological formation is considered an option to reduce CO2 emissions in the atmosphere. After injection the CO2 will slowly dissolve into the pore water producing low pH fluids with a high capacity for dissolving carbonates. Limestone rock dissolution induces geometrical parameters changes such as porosity, pore size distribution, or tortuosity which may consequently modify transport properties (permeability, diffusion coefficient). Characterizing these changes is essential for modelling flow and CO2 transport during and after the CO2 injection. Indeed, these changes can affect the storage capacity and injectivity of the formation. Very few published studies evaluate the transport properties changes (porosity, permeability, pore size distribution, diffusion coefficient) due to fluid-rock interactions. Here we report experimental results from the injection of acidic fluid into limestone core samples of 25.4 mm diameter, 12.5 mm length. Experiments were realized at room temperature. Before and after each acidic rock attack, we measure the sample porosity, the diffusion coefficient and the pore size distribution. During percolation experiments, the permeability changes are recorded and chemical samples taken to evaluate calcite dissolution. Several dissolution-characterization cycles are performed on each sample in order to study the evolution and relation of the different parameters. These experiments show that far from the well injection site (i.e. intermediate pH solution (4-5)), dissolution processes are characterized by slow mass transfers. We measure a permeability decrease during the different experiments. Nevertheless, we observed a porosity increase in the sample inlet with higher pore diameters. In the opposite, we measured smaller pore sizes near the core sample outlets. These results indicate that some fine particles move from the sample inlet towards the outlet. Due to the low fluid acidity, these fine particles are not dissolved inside the samples and are transported inside. Consequently, these particles can locally clog the porous space and decrease the permeability. Such processes can decrease the CO2 storage capacity and pore volume accessibility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Intermittent Properties of Flow in Porous Media

  • Di Anna, Pietro
  • Le Borgne, Tanguy
  • Dentz, Marco
  • Tartakovsky, Alexandre M.
  • Bolster, Diogo
  • Davy, Philippe
Póster presentado en la American Geophysical Union Fall Meeting, celebrada en San Francisco del 3 al 7 de diciembre de 2012., From numerical simulations of pore-scale flow in porous media, we demonstrate the existence of an intermittent-like behaviour of Lagrangian velocities similar to the one observed in turbulent flows. This phenomenon, characterized by non-Gaussian distributions of Lagrangian velocity increments and long-range correlation of Lagrangian accelerations, is at the origin at the breakdown of the classical upscaled models. For transport in porous media this is manifested by anomalous scaling of the temporal evolution of the characteristic dispersion length, called anomalous dispersion. Long range correlation is related to the existence of stagnation zones and localized high velocity channels. While for turbulence, intermittency of Lagrangian velocities can be represented by multifractal random walk, for porous media we show that the dynamical picture is different and that this process is well captured by a correlated continuous time random walk., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Joint evolution of hydraulic transport parameters during limestone dissolution

  • Rötting, Tobias
  • Casalinuovo, Diosenia
  • Carrera, Jesús
Póster presentado en la European Geosciences Union General Assembly, celebrada en Viena del 22 al 27 de abril de 2012., CO2-brine-rock chemical reactions change the transport parameters (saturated and relative permeability of the wetting and non-wetting fluid, porosity, diffusion coefficient, pore size distribution) of reservoir rocks for geological CO2 storage by dissolution and precipitation processes that modify the pore space geometry. These changes can affect the storage capacity and injectivity of the formation. The knowledge of these transport parameters and how they evolve in time is also vital also for accurate modelling of CO2 storage and multi-phase flow simulations. Most published studies for reservoir rocks concentrate on the changes of porosity and saturated liquid permeability, but hardly any data is available on the other parameters, and even less on their evolution during interaction with CO2. In the present laboratory experiments the joint evolution of all relevant transport parameters of sedimentary reservoir rocks upon reaction with CO2 is being investigated. After determination of initial saturated and relative permeability of the wetting and non-wetting fluid, porosity, diffusion coefficient, and pore size distribution, the rock sample is attacked by permeation with dissolved CO2. After partial dissolution, the suite of transport parameters is measured again. Several dissolution-characterization cycles are performed on each sample in order to study the evolution and interaction of the different parameters. Moreover, the modulus of elasticity and the electrical resistivity of the samples are measured before and after the different dissolution stages in order to evaluate the changes in geophysical properties., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Three-dimensional Scalar Mixing in Porous Media - Flow Heterogeneity and Mixing Enhancement

  • Koch, J.
  • Nowak, W.
  • Barros, Felipe P. J. de
  • Dentz, Marco
Póster presentado en la European Geosciences Union General Assembly, celebrada en Viena del 22 al 27 de abril de 2012., This work addresses the dissipation of gradients, dilution and mixing of passive scalars in three-dimensional heterogeneous porous media. It is well known that spatial heterogeneity of hydraulic conductivity causes a significant increase of mixing and dilution. Irregular flow patterns force spreading of the contaminant plume, leading to erratic spatial distributions of concentrations. Contrasts in the medium permeability may cause flow focusing, which distorts the shape of a solute cloud and increases contact surface with the surrounding fluid. For two-dimensional problems, this has been studied and analyzed extensively. In recent work, we showed how specific hydrodynamic features of a two dimensional Darcian flow, e.g. shear and normal strain stresses, can be linked directly to the increase of mixing and dilution of a passive scalar. The flow topology in three-dimensional domains, however, may differ from that in two-dimensional flows. In three-dimensional domains, flow trajectories may twist and wrap. This might re-shuffle the initial spatial structure and thus generate even more contact surface with the surrounding fluid. In general, kinematical mechanisms such as shear and normal strain deformations gain an additional dimension to work on. Through numerical simulations, we illustrate how these mechanisms are also among the key drivers for enhanced mixing in three-dimensional porous media. We raise the question under what circumstances and to which extents the additional degrees of freedom in the hydrodynamic mechanisms can further enhance mixing and dilution in spatially heterogeneous problems. In this numerical study, we quantify metrics of the mixing behavior for a scalar plume emitted from a continuous source. Within a stochastic framework, we show how several hydrodynamic features impact the pre-defined mixing metrics., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Multiscale modeling of porosity, permeability, diffusivity and reactive surface changes during dissolution

  • Sadhukhan, S.
  • Gouze, Philippe
  • Dentz, Marco
  • Dutta, T.
Póster presentado en la European Geosciences Union General Assembly, celebrada en Viena del 22 al 27 de abril de 2012., Meshed models in which equations are solved assuming that constant effective macroscopic properties can be defined in each cells are essential tools for predicting reservoir properties changes triggered by mineral dissolution (or precipitation) due to CO2 injection. However, the parameterization of the dissolution–precipitation problem and their feedback effects on the flow field are still challenging. The problem arises from the mismatch between the scales at which averaged parameters and parameters relationships (such as the porosity-permeability heuristic relation) are defined and the scale at which chemical reactions occur according to the pore scale fluid concentration and flow heterogeneities and modify the pore network geometry. Here, we investigate the links between the dissolution mechanisms that control the porosity changes and the related changes of the effective macroscopic value of the reactive surface area, permeability and diffusivity (or diffusional tortuosity) by means of numerical modeling at pore scale. The porous structure (pore space and mineral matrix) is spatially discretized in voxels. It is issued from either numerical generation or from processed X-ray microtomography images. Flow, reactant transport and matrix dissolution is modeled by solving iteratively the Stokes equation with no-slip boundary condition at the rock-pore interface and the advection-diffusion equation using Time Domain Random Walk (TDRW). In the examples presented here, the reaction is a first order kinetic dissolution reaction which allows a simple parameterization of the problem using the average Peclet and the Damkohler numbers characterizing the local diffusion-to-advection and the reaction-toadvection characteristic times. Depending on these parameters that are related to the reactant concentration, the reaction kinetic and the macroscopic pressure drop across the domain, effective relations between the porosity, permeability and diffusivity are obtained, showing a large range of behavior that can be directly compared to those obtained from laboratory scale experiments. The results emphasize the large influence of the initial heterogeneity. In the case of heterogeneous dissolution, i.e. when mass transfer localization occurs and heterogeneity is created by the dissolution itself (for example for high Da values) the effective parameters are scale dependent and cannot be used directly in macroscale models., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Anomalous kinetics of reactive front in Porous Media

  • De Anna, Pietro
  • Tartakovsky, Alexandre M.
  • Le Borgne, Tanguy
  • Dentz, Marco
Póster presentado en la European Geosciences Union General Assembly, celebrada en Viena del 22 al 27 de abril de 2012., Natural flow fields in porous media display a complex spatio-temporal organization due to heterogeneous geological structures at different scales. This multiscale disorder implies anomalous transport properties (e.g. Berkowitz et al. RG 2006). Here, we show that it also implies anomalous mixing and reaction kinetics. This effect arises from pore scale, non Gaussian and correlated, velocity distributions. We consider a reactive front, where a component A displaces a component B that saturates initially the porous domain. The reactive component C is produced at the front located at interface between the A and B domains. We investigate the effective kinetics for the mixing limited bimolecular reaction A+B ! C in a 2D porous medium. The system is studied numerically via the SPH method. While Fickian diffusion predicts a scaling of the cumulative mass of C as t0:5 (e.g. Gramling et al. 2002), we observe that the temporal evolution of the cumulative mass of reaction product does not follow this classical law. Two temporal regimes are identified. At early times the invading solute is organized in fingers of high velocity. Reactions are fast and the mass product grows as t2. At late times reactions slow down but still grow faster than Fickian case. We discuss the different scaling regimes arising depending on the dominant process that governs mixing. In order to upscale these processes, we analyze the Lagrangian velocity properties, which are characterized by the non Gaussian distributions and long range temporal correlation. The main origin of these properties is the existence of very low velocity regions where solute particles can remain trapped for a long time and the channeling of flow in localized high velocity regions, which created finger-like structures in the concentration field., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Modeling dolomite - brine interaction in the context of geological CO2 sequestration

  • Dávila, Gabriela
  • García Rios, María
  • Soler, Josep M.
  • Cama, Jordi
Póster presentado en la European Geosciences Union General Assembly, celebrada en Viena del 22 al 27 de abril de 2012., The repository rocks for CO2 injection at the Hontomín test site in northern Spain are dominantly limestones and dolostones. Contact with CO2-rich acid brines will induce the dissolution of carbonate minerals. Since the brine contains sulfate, gypsum (or anhydrite at depth) will precipitate, which may coat the surface of the dissolving carbonate grains and cause their passivation. These mineral reactions will also induce changes in porosity and permeability. Laboratory column experiments under controlled pCO2 (initially up to 10 bar) will be performed to quantify these processes. Results were already obtained for experiments under atmospheric pCO2. Numerical modeling of the experiments has been performed using the CrunchFlow reactive transport code. These are one-dimensional simulations of the geochemical evolution of columns filled with dolomite grains (size 1-2 mm) that react with synthetic brines. pCO2 ranges from atmospheric up to 10 bar, at room temperature. Model and experimental results show that at under normal laboratory conditions (atmospheric pCO2) dissolution of dolomite and precipitation of calcite and gypsum are taking place, yielding a considerable increase in porosity at the beginning of the column. Simulations considering supercritical pCO2 and 70 C predict a more significant dissolution of dolomite and a large increase in porosity along the whole column. Dedolomitization (mole per mole replacement of dolomite by calcite) is a negligible process in these experiments. Comparison between experimental and simulated results will allow obtainment of proper kinetic parameters and quantification of changes in the initial mineralogy. Simulations will also be applied to predict variations in rock porosity that might occur under repository conditions., This research was funded by FUNDACIÓN CIUDAD DE LA ENERGÍA (CIUDEN). G.D. is financially supported by a JAE (Junta de Ampliación de Estudios) grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Experimental and modeling study of the hydrogeochemical properties of the Hontomin main reservoir rock under CO2 subcritical conditions

  • Cama, Jordi
  • García Rios, María
  • Soler, Josep M.
  • Dávila, Gabriela
Ponencia presentada en la European Geosciences Union General Assembly, celebrada en Viena del 22 al 27 de abril de 2012., The main reservoir rock for CO2 injection at the PDT Hontomin site (Spain) is a vuggy limestone made up of calcite ( 97 %) and dolomite ( 1%). Contact with CO2-rich acid brines will induce the dissolution of carbonate minerals. Since the brine contains sulfate, gypsum (or anhydrite at depth) will precipitate, which may coat the surface of the dissolving carbonate grains and cause their passivation. These mineral reactions will also induce changes in porosity and permeability. Two types of laboratory experiments under controlled pCO2 (initially up to 40 bar) are being performed to quantify these processes: columns filled with crushed carbonate grains of calcite or dolomite (size of 1-2 mm) and Hontomin limestone rock cores. Under subcritical pCO2 the experimental results of the column experiments indicate that calcite/dolomite dissolution and gypsum precipitation are the dominant processes involved. Dedolomitization (mole per mole replacement of dolomite by calcite) is a negligible process in these experiments. In a core plug test, a synthetic version of the Hontomin formation brine was injected into the rock (35.15 mm in diameter and 66 mm in length). A constant hydraulic gradient of 0.5 MPa between both ends of the core (4 – 3.5 MPa) was used. Confining lateral and axial pressure was 10 MPa. Temperature was 40 C. As the pH of the injecting brine in equilibrium with a PCO2 of 4 MPa is acidic ( 3), it was observed that the main process that yields variation in the hydrodynamic behavior of the rock was the dissolution of mineral carbonates, yielding an increase in the flow rate and initial permeability. The interpretation (reactive transport modeling) of the changes in mineralogy and solution composition, together with the analysis of the changes in physical properties (porosity and permeability), will provide valuable information (e.g., kinetic parameters such as mineral surface area) required in the performance assessment of a CO2 sequestration plant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Mixing-induced dissolution in unstable reactive flow

  • Hidalgo, Juan J.
  • Cabeza, Y.
  • Dentz, Marco
  • Carrera, Jesús
Ponencia presentado en la American Geophysical Union Fall Meeting, celebrada en San Francisco del 9 al 13 de diciembre de 2013., The evolution of porosity in carbonate reservoirs during CO2 injection, and the wormhole formation in karst aquifers can be attributed to fast equilibrium reactions, which are characterized by large Damköhler numbers. Under these conditions the reaction rate is mixing-controlled, and can be quantified in terms of the mixing rate of the conservative components of the chemical system [De Simoni et al. (2005), Water. Resour. Res.]. Here, we study the calcite dissolution during the convective-driven mixing of CO2 in a carbonate aquifer. We derive an analytical expression for the speciation contribution to the reaction rate which is valid under a wide range of reservoir conditions (pH<8.3). This allows us to analyze systematically the impact of conservative mixing mechanisms on the dynamics of the complex reactive flow system. We explore the evolution of the porosity and the permeability by means of numerical simulations of a CO2 stationary layer dissolving into brine using an analogue-fluid system with a non-monotonic density-concentration curve [Neufeld et al. (2010), Geophys. Res. Lett.; Backhaus, et al. (2011), Phys. Rev. Lett.; Hidalgo et al. (2013), Adv. Water Resour.]. Our findings show how the developed porosity patterns depend on the fingering instabilities caused by the convective-driven dissolution of the CO2, the movement of the receding CO2-brine interface, and the properties of the chemical system., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Hydrogeological characterization of the Heletz Sands reservoir, Heletz (Israel) as a preliminary step towards CO2 injection experiments

  • Bensabat, Jacob
  • Carrera, Jesús
  • Brauchler, Ralf
Bensabat, Jacob et al., Ponencia presentada en la European Geosciences Union General Assembly, celebrada en Viena del 7 al 12 de abril de 2013., One the major components of the EU-FP7 funded MUSTANG project is to conduct a highly controlled se- ries of CO 2 injection experiments, aimed at determining field values of key CO 2 trapping mechanisms such as dissolution and residual trapping and to establish a comprehensive and consistent dataset for model validation. Prior to injecting CO 2 there is a need to achieve a sufficient degree of hydrogeological characterization of the reservoir. In what follows we present a sequence of hydrologic tests to be conducted at Heletz and their expected contribution to the understanding relevant hydrogeology. These include: 1) Chemical characterization of the formation fluid; 2) Flowing Fluid Electrical Conductivity log, aimed at determining the vertical variability of the reservoir permeability in the near well vicinity; 3) Water pulse and pumping tests, aimed at determining the reservoir scale hydraulic properties; 4) Thermal test, aimed at determining the value of the heat transfer coefficient from the reservoir to the borehole fluid, which is responsible for the heating of injected fluid in the borehole; 5) two-well injection and pumping of water and tracers test, in order to determine the impact of heterogeneity on the hydraulic parameters and to identify preferential flow paths in the reservoir. This paper presents the design and planning of the experiments, the results obtained in field and a preliminary interpretation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A Multi-Continuum Approach to Large Scale Two-Phase Flow in Heterogeneous Media

  • Dentz, Marco
  • Neuweiler, Insa
  • Silva, Orlando
  • Saaltink, Maarten W.
  • Carrera, Jesús
Ponencia presentada en la 9th European Fluid Mechanics Conference, celebrada en Roma del 9 al 13 de sepriembre de 2012., Spatial heterogeneities impact on the large scale dynamics of two-phase flow in geological media. Unlike for flow in a homogeneous medium, the saturation front is roughened by spa- tial variability in permeability. The impact on the saturation distribution can be measured by a macroscopic dispersion coefficient. For high permeability contrasts, additional inter- faces can be created behind the saturation front due to fluid trapping in low permeability zones. This type of trapping phenomena are well known from passive solute transport in heterogeneous media and in general leads to non-local dynamic equations for the macro- scopic process description. For two-phase flow, the contrast in typical mass transfer time scales on the macroscopic support scale leads to local non-equilibrium, in the sense that the local saturation state cannot be characterized by a single macroscopic value. We approach the quantification of these phenomena using a multicontinuum approach that represents the heterogeneous medium by a primary mobile continuum, in which flow is viscosity dominated and a suite of secondary continua, in which capillary flow is dominant. The mobile and im- mobile continua are connected by continuity in capillary pressure at the material interfaces. Using homogenization theory, we derive a non-local two-phase flow equation for the satu- ration in the mobile continuum that captures non-equilibrium effect in the macroscale flow dynamics., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Mixing and Reaction in Heterogeneous Media

  • Dentz, Marco
Ponencia presentada en la XIX International Conference on Computational Methods in Water Resources (CMWR 2012), celebrad del 17 al 21 de junio de 2012 en la Universidad de Illinois., Observed chemical transport and reaction behaviors in heterogeneous media are quantita - tively and qualitatively different from the ones expected for equivalent homogeneous media. Spatial fluctuations in the physical and chemical medium properties can lead to early of late solute arrivals, forward and back tails of spatial solute distribution and enhanced spread - ing. Mass transfer over the complex heterogeneity - induced interface interfaces acts on both mixing and reaction. It leads to local non- equilibrium, which can enhance mixing and mixing - induced chemical reactions. Rates of heterogeneous reactions may be smaller than expected because of mass transfer limitations. Characterization and quantification of these phenomena on the large scale rely on support volumes that are in general not well - mixed. Incomplete mixing limits the applicability of classical approaches that rely on well mixed support volumes. It also limits the applicability of approaches that describe only the evo - lution of the mean concentration because the quantification of mixing as well as chemical reactions in general requires information of concentration variability on the support scale. This presentation wants to give a brief account on approaches to quantify heterogeneity - induced mixing and reactive transport., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Persistence of incomplete mixing in heterogeneous porous media

  • Leborgne, Tanguy
  • Dentz, Marco
  • Davy, Philippe
  • Bolster, Diogo
  • Carrera, Jesús
Ponencia presentada en la XIX International Conference on Computational Methods in Water Resources (CMWR 2012), celebrad del 17 al 21 de junio de 2012 en la Universidad de Illinois., Local full mixing is often a key assumption that is needed in dispersion and reactive transport models. Complete mixing implies a loss of memory of Lagrangian velocities alon g particle trajectories. Thus, reaching this state is the main condition for Fickian dispersion. The existence of a locally fully mixed scale, which we call here mixing scale, is also required for defining the concept of local concentration and thus for us ing the mass action law for chemical reactions at local scale. The existence of this scale of homogenization can be assumed by invoking diffusive mixing. In this case, the mixing scale is identified to the characteristic diffusion scale. Yet, in heterogene ous velocity fields, where shear may act at all scales, the definition of the scale where elements are fully mixed is not obvious. E xperimental observations of anomalous dispersion and chemical kinetics in heterogeneous porous media suggest that incomplet e mixing at different scales may be at the root of these non classical behaviors. In order to investigate this we define a l ocal mixing scale as the largest volume which can be considered as fully mixed and propose a method for estimating it from particle separation statistics (Le Borgne et al., Phys Rev. E, 2011). In homogeneous media, local mixing is ensured by diffusion and the mixing scale grows like the square root of time. In heterogeneous velocity fields, the growth of hom ogenized areas is limited by the shear action of the velocity field. Hence, for strong heterogeneities, we find that the mixing scale grows subdiffusively, implying the persistence of incomplete mixing over long time scales. As the latter implies a significant correlation of Lagran gian velocities, we show that this subdiffusive scaling of mixing is related to a superdiffusive scaling of plume dispersion. Using different examples, we discuss how the analysis of the dynamics of local mixing can be used for understanding global dispersion and chemical kinetics laws., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Upscaling of transport in correlated non Gaussian velocity fields: consequences for modeling mixing and reactions in porous media

  • De Anna, Pietro
  • Leborgne, Tanguy
  • Tartakovsky, Alexandre M.
  • Dentz, Marco
  • Bolster, Diogo
Ponencia presentada en la XIX International Conference on Computational Methods in Water Resources (CMWR 2012), celebrad del 17 al 21 de junio de 2012 en la Universidad de Illinois., Natural flow fields in porous media display a complex spatio - temporal organization due to heterogeneous geological struc tures at different scales. This multiscale disorder implies anomalous dispersion, mixing and reaction kinetics (Berkowitz et al. RG 2006, Tartakovsky PRE 2010). In this context, classical continuum models based on Fickian mixing may misrepresent reactive t ransport. Using two dimensional pore scale SPH numerical simulations of flow and transport, we demonstrate the non Gaussian nature and the long range temporal correlation of the Lagrangian velocity field. The main origin of these properties is the existenc e of very low velocity regions where solute particles can remain trapped for a long time. Another source of strong correlation is the channeling of flow in localized high velocity regions. Thus, this result questions the applicability of classical Langevin approaches f or modeling mixing and reaction kinetics. In order to define an effective upscaled model, we adopt a upscaled model that takes into account the statistical properties of the pore scale Lagrangian velocity field. Analyzing the pore scale statistical properties of the flow, we show the spatial Markovian, and temporal non Markovian, nature of the Lagrangian velocity field. Therefore, an upscaled model can be defined as a correlated Continuous Time Random Walk (Le Borgne et al. PRL 2008) in two dimension. This account for both non Gaussian velocity distribution and long range temporal correlation property. The key feature of this model is the definition of a transition probability density for Lagrangian velocities across a characteristic correlation distance. We quantify this transition probability density from pore scale simulations and use it in the effective random walk model. In this framework, we discuss the ability of this effective model to represent correctly dispersion, mixing and reaction kinetics., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Mixing-induced dissolution in fingering reactive flow

  • Hidalgo, Juan J.
  • Cabeza, Yoar
  • Dentz, Marco
  • Carrera, Jesús
Ponencia presentada en la European Geosciences Union General Assembly, celebrada en Viena del 27 de abril al 2 de mayo de 2014., The evolution of porosity in carbonate reservoirs during CO2 injection, and the wormhole formation in karst aquifers can be attributed to fast equilibrium reactions, which are characterized by large Damköhler numbers. Under these conditions the reaction rate is mixing-controlled, and can be quantified in terms of the mixing rate of the conservative components of the chemical system [De Simoni et al. (2005), Water. Resour. Res.]. Here, we study the calcite dissolution during the convective-driven mixing of CO2 in a carbonate saline aquifer. The CO2-brine mixture is denser than the two initial fluids, leading to a Rayleigh-Bénard-type instability known as convective mixing, which greatly accelerates CO2 dissolution. The dissolution front can display a stable or fingering shape depending on the relation of the governing forces. We explore the feedback between fluid instabilites, porosity evolution, and permeability changes by means of numerical simulations of a CO2 stationary layer dissolving into brine using an analogue-fluid system with a nonmonotonic density-concentration curve [Neufeld et al. (2010), Geophys. Res. Lett.; Backhaus, et al. (2011), Phys. Rev. Lett.; Hidalgo et al. (2013), Adv. Water Resour.]. We derive an analytical expresion for the speciation contribution to the reaction rate which is valid under a wide range of reservoir conditions (pH< 8:3). This allows us to analyze systematically the impact of conservative mixing mechanisms on the dynamics of the complex reactive flow system. Our findings show how the developed porosity patterns depend on the fingering instabilities caused by the convective-driven dissolution of the CO2, the movement of the receding CO2-brine interface, and the properties of the chemical system., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Evolution of dissolution patterns by mixing corrosion in karst systems

  • Cabeza, Yoar
  • Hidalgo, Juan J.
  • Dentz, Marco
  • Carrera, Jesús
Póster presentado en la European Geosciences Union General Assembly, celebrada en Viena del 27 de abril al 2 de mayo de 2014., Conduit enlargement in a karst system is usually assumed to be controlled by non-linear kinetics that allow aggressive water to penetrate along fractures (Gabrovšek and Dreybrodt, 2000, Water. Resour. Res.). However, other mechanism known as mixing corrosion may be decisive for the geometry of the resulting dissolution patterns, at least at depth. Mixing corrosion is caused by the renovation of the dissolution capacity that happens when two waters saturated with respect to calcite but with different CO2 partial pressure mix. In this case, the reaction rate is mixing-controlled and can be quantified in terms of the mixing proportion of the conservative components of the chemical system (De Simoni et al. 2005, Water. Resour. Res.). Therefore, the porosity creation governed by the reaction rate will depend on the chemical differences between the end members and by the degree of mixing. The aim of this work is to study the evolution of the porosity and permeability within a carbonate matrix by mixing-driven dissolution under different diffusion regimes. The speciation of the chemical system is calculated using CHEPROO. Flow and transport are modeled using an ad hoc code that accounts for feedback between reactions, porosity creation and permeability changes. The effects of the initial porosity field, water chemistry and the resulting geometry of the dissolution patterns are explored for different scenarios., Peer reviewed