Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Comparison based sorting for systems with multiple GPUs

  • Tanasic, Ivan
  • Vilanova, Lluís
  • Jorda, Marc
  • Cabezas, Javier
  • Gelado Fernandez, Isaac
  • Navarro, Nacho|||0000-0003-3637-4568
  • Hwu, Wen-mei W.
As a basic building block of many applications, sorting algorithms that efficiently run on modern machines are key for the performance of these applications. With the recent shift to using GPUs for general purpose compuing, researches have proposed several sorting algorithms for single-GPU systems. However, some workstations and HPC systems have multiple GPUs, and applications running on them are designed to use all available GPUs in the system. In this paper we present a high performance multi-GPU merge sort algorithm that solves the problem of sorting data distributed across several GPUs. Our merge sort algorithm first sorts the data on each GPU using an existing single-GPU sorting algorithm. Then, a series of merge steps produce a globally sorted array distributed across all the GPUs in the system. This merge phase is enabled by a novel pivot selection algorithm that ensures that merge steps always distribute data evenly among all GPUs. We also present the implementation of our sorting algorithm in CUDA, as well as a novel inter-GPU communication technique that enables this pivot selection algorithm. Experimental results show that an efficient implementation of our algorithm achieves a speed up of 1.9x when running on two GPUs and 3.3x when running on four GPUs, compared to sorting on a single GPU. At the same time, it is able to sort two and four times more records, compared to sorting on one GPU., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

The Mont-Blanc prototype: an alternative approach for HPC systems

  • Rajovic, Nikola
  • Rico, Alejandro
  • Mantovani, Filippo|||0000-0003-3559-4825
  • Ruiz, Daniel
  • Vlarrubi, Josep O.
  • Gomez, Constantino
  • Backes, Luna
  • Nieto, Diego
  • Servat, Harald
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Adeniyi-Jones, Chris
  • Derradji, Said
  • Gloaguen, Hervé
  • Lanucara, Piero
  • Sanna, Nico
  • Mehaut, Jean-François
  • Pouget, Kevin
  • Videau, Brice
  • Boyer, Eric
  • Allalen, Momme
  • Auweter, Axel
  • Brayford, David
  • Tafani, Daniele
  • Weinberg, Volker
  • Brömmel, Dirk
  • Halver, René
  • Meinke, Jan H.
  • Beivide Palacio, Ramon
  • Benito, Mariano
  • Vallejo, Enrique
  • Valero Cortés, Mateo|||0000-0003-2917-2482
  • Ramirez, Alex
High-performance computing (HPC) is recognized as one of the pillars for further progress in science, industry, medicine, and education. Current HPC systems are being developed to overcome emerging architectural challenges in order to reach Exascale level of performance, projected for the year 2020. The much larger embedded and mobile market allows for rapid development of intellectual property (IP) blocks and provides more flexibility in designing an application specific system-on-chip (SoC), in turn providing the possibility in balancing performance, energy-efficiency, and cost. In the Mont-Blanc project, we advocate for HPC systems being built from such commodity IP blocks, currently used in embedded and mobile SoCs. As a first demonstrator of such an approach, we present the Mont-Blanc prototype; the first HPC system built with commodity SoCs, memories, and network interface cards (NICs) from the embedded and mobile domain, and off-the-shelf HPC networking, storage, cooling, and integration solutions. We present the system’s architecture and evaluate both performance and energy efficiency. Further, we compare the system’s abilities against a production level supercomputer. At the end, we discuss parallel scalability and estimate the maximum scalability point of this approach across a set of applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Computational Fluid and Particle Dynamics Simulations for Respiratory System: Runtime Optimization on an Arm Cluster

  • Garcia-Gasulla, Marta
  • Josep-Fabrego, Marc
  • Eguzkitza, Beatriz|||0000-0002-3302-6667
  • Mantovani, Filippo|||0000-0003-3559-4825
Computational fluid and particle dynamics simulations (CFPD) are of paramount importance for studying and improving drug effectiveness. Computational requirements of CFPD codes involves high-performance computing (HPC) resources. For these reasons we introduce and evaluate in this paper system software techniques for improving performance and tolerate load imbalance on a state-of-the-art production CFPD code. We demonstrate benefits of these techniques on both Intel- and Arm-based HPC clusters showing the importance of using mechanisms applied at runtime to improve the performance independently of the underlying architecture. We run a real CFPD simulation of particle tracking on the human respiratory system, showing performance improvements of up to 2X, keeping the computational resources constant., This work is partially supported by the Spanish Government (SEV-2015-0493), by the Spanish Ministry of Science and Technology project (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), and by the European Mont-Blanc projects (288777, 610402 and 671697)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Filling the gap between education and industry: evidence-based methods for introducing undergraduate students to HPC

  • Mantovani, Filippo|||0000-0003-3559-4825
  • Banchelli, Fabio
Educational institutions provide in most cases basic theoretical background covering several computational science topics, however High Performance Computing (HPC) and Parallel and Distributed Computing (PDC) markets require specialized technical profiles. Even the most skilled students are often not prepared to face production HPC applications of thousands of lines nor complex computational frameworks from other disciplines nor heterogeneous multinode machines accessed by hundreds of users. In this paper, we offer an educational package for filling this gap. Leveraging the 4-years experience of the Student Cluster Competition, we present our educational journey together with the lessons learned and the outcomes of our methodology. We show how, in a time span of a semester and an affordable budget, a university can implement an educational package preparing pupils for starting competitive professional careers. Our findings also highlight that 78% of the students exposed to our methods remain within the HPC high-education, research or industry., The authors of this paper and the participants in the SCC have been supported by the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects, grant agreements n. 288777, 610402 and 671697; the HPC Advisory Council; the Facultat d’Informàtica de Barcelona – Universitat Politècnica de Catalunya; Arm Ltd.; Cavium Inc.; E4 Computer Engineering. We warmly thank Luna Backes Drault for her unconditioned dedication to the SCC cause in the early days and the pizzeria 7bello in Frankfurt for always having a table and a smile for us., Si
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Implementation of the K-Means Algorithm on Heterogeneous Devices: A Use Case Based on an Industrial Dataset

  • Xu, Ying hao
  • Vidal, Miquel|||0000-0002-1973-8289
  • Arejita, Beñat
  • Diaz, Javier
  • Alvarez, Carlos
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Mantovani, Filippo|||0000-0003-3559-4825
This paper presents and analyzes a heterogeneous implementation of an industrial use case based on K-means that targets symmetric multiprocessing (SMP), GPUs and FPGAs. We present how the application can be optimized from an algorithmic point of view and how this optimization performs on two heterogeneous platforms. The presented implementation relies on the OmpSs programming model, which introduces a simplified pragma-based syntax for the communication between the main processor and the accelerators. Performance improvement can be achieved by the programmer explicitly specifying the data memory accesses or copies. As expected, the newer SMP+GPU system studied is more powerful than the older SMP+FPGA system. However the latter is enough to fulfill the requirements of our use case and we show that uses less energy when considering only the active power of the execution., This work is partially supported by the European Union H2020 project AXIOM (grant agreement n. 645496), HiPEAC (grant agreement n. 687698), and Mont-Blanc (grant agreements n. 288777, 610402 and 671697), the Spanish Government Programa Severo Ochoa (SEV-2015-0493), the Spanish Ministry of Science and Technology (TIN2015- 65316-P) and the Departament d’Innovació, Universitats i Empresa de la Generalitat de Catalunya, under project MPEXPAR: Models de Programaci´o i Entorns d’Execució Paral·lels (2014-SGR-1051)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Advanced Performance Analysis of HPC Workloads on Cavium ThunderX

  • Calore, Enrico
  • Mantovani, Filippo|||0000-0003-3559-4825
  • Ruiz, Daniel
The interest towards Arm based platforms as HPC solutions increased significantly during the last 5 years. In this paper we show that, in contrast to the early days of pioneer tests, several application performance analysis techniques can now be applied also to Arm based SoCs. To show the possibilities offered by the available tools, we provide as an example, the analysis of a Lattice Boltzmann HPC production code, highly optimized for several architectures and now ported also to Armv8. We tested it on a system based on a production silicon, Cavium CN8890 SoC. In particular, as performance analysis tools we adopt Extrae and Paraver, making use of the PAPI support, initially developed by us for the ThunderX platform, and now available also upstream. The contribution of this paper is twofold: first, we demonstrate that performance analysis tools available on standard HPC platforms, independently from the CPU providers, are nowadays available also for Arm SoCs; second, we actually optimize an HPC application for this platforms, showing similarities with other architectures., The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects [15], grant agreements n. 288777, 610402 and 671697. E.C. was partially founded by “Contributo 5 per mille assegnato all’Università degli Studi di Ferrara - dichiarazione dei redditi dell’anno 2014”. Cavium Inc. has kindly supported this research providing access to documentation and platforms.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Multi-Node Advanced Performance and Power Analysis with Paraver

  • Mantovani, Filippo|||0000-0003-3559-4825
  • Calore, Enrico
Performance analysis tools allow application developers to identify and characterize the inefficiencies that cause performance degradation in their codes. Due to the increasing interest in the High Performance Computing (HPC) community towards energy-efficiency issues, it is of paramount importance to be able to correlate performance and power figures within the same profiling and analysis tools. For this reason, we present a preliminary performance and energy-efficiency study aimed at demonstrating how a single tool can be used to collect most of the relevant metrics. Moreover we show how the same analysis techniques are applicable on different architectures, analyzing the same HPC application running on two clusters, based respectively on Intel Haswell and Arm Cortex-A57 CPUs., The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects, grant agreements n. 288777, 610402 and 671697. E.C. was partially founded by “Contributo 5 per mille assegnato all’Universit`a degli Studi di Ferrara - dichiarazione dei redditi dell’anno 2014”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Is Arm software ecosystem ready for HPC?

  • Banchelli Gracia, Fabio F.
  • Ruiz, Daniel
  • Hao Xu Lin, Ying
  • Mantovani, Filippo|||0000-0003-3559-4825
In recent years, the HPC community has increasingly grown its interest towards the Arm architecture with research projects targeting primarily the installation of Arm-based clusters. State of the art research project examples are the European Mont-Blanc, the Japanese Post-K, and the UKs GW4/EPSRC. Primarily attention is usually given to hardware platforms, and the Arm HPC community is growing as the hardware is evolving towards HPC workloads via solutions borrowed from mobile market e.g., big.LITTLE and additions such as Armv8-A Scalable Vector Extension (SVE) technology. However the availability of a mature software ecosystem and the possibility of running large and complex HPC applications plays a key role in the consolidation process of a new technology, especially in a conservative market like HPC. For this reason in this poster we present a preliminary evaluation of the Arm system software ecosystem, limited here to the Arm HPC Compiler and the Arm Performance Libraries, together with a porting and testing of three fairly complex HPC code suites: QuantumESPRESSO, WRF and FEniCS. The selection of these codes has not been totally random: they have been in fact proposed as HPC challenges during the last two editions of the Student Cluster Competition at ISC where all the authors have been involved operating an Arm-based cluster and awarded with the Fan Favorite award., The research leading to these results has received funding from the European Community's Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects [3], grant agreements n. 288777, 610402 and 671697. The authors would also like to thank E4 Computer Engineering for providing part of the hardware resources needed for the evaluation carried out in this poster as well as for greatly supporting the Student Cluster Competition team.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Energy Analysis of a 4D Variational Data Assimilation Algorithm and Evaluation on ARM-Based HPC Systems

  • Arcucci, Rossella
  • Basciano, Davide
  • Cilardo, Alessandro
  • D'Amore, Luisa
  • Mantovani, Filippo|||0000-0003-3559-4825
Driven by the emerging requirements of High Performance Computing (HPC) architectures, the main focus of this work is the interplay of computational and energetic aspects of a Four Dimensional Variational (4DVAR) Data Assimilation algorithm, based on Domain Decomposition (named DD-4DVAR). We report first results on the energy consumption of the DD-4DVAR algorithm on embedded processor and a mathematical analysis of the energy behavior of the algorithm by assuming the architectures characteristics as variable of the model. The main objective is to capture the essential operations of the algorithm exhibiting a direct relationship with the measured energy. The experimental evaluation is carried out on a set of mini-clusters made available by the Barcelona Supercomputing Center., The research has received funding from European Commission under H2020-MSCA-RISE NASDAC project (grant agreement no. 691184) FP7 Mont-Blanc and Mont-Blanc 2 (grant agreements no. 288777 and 610402), H2020-FET Mont-Blanc 3 (grant agreement 671697)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Is Arm software ecosystem ready for HPC?

  • Banchelli Gracia, Fabio F.
  • Ruiz, Daniel
  • Hao Xu Lin, Ying
  • Mantovani, Filippo
In recent years, the HPC community has increasingly grown its interest towards the Arm architecture with research projects targeting primarily the installation of Arm-based clusters. State of the art research project examples are the European Mont-Blanc, the Japanese Post-K, and the UKs GW4/EPSRC. Primarily attention is usually given to hardware platforms, and the Arm HPC community is growing as the hardware is evolving towards HPC workloads via solutions borrowed from mobile market e.g., big.LITTLE and additions such as Armv8-A Scalable Vector Extension (SVE) technology. However the availability of a mature software ecosystem and the possibility of running large and complex HPC applications plays a key role in the consolidation process of a new technology, especially in a conservative market like HPC. For this reason in this poster we present a preliminary evaluation of the Arm system software ecosystem, limited here to the Arm HPC Compiler and the Arm Performance Libraries, together with a porting and testing of three fairly complex HPC code suites: QuantumESPRESSO, WRF and FEniCS. The selection of these codes has not been totally random: they have been in fact proposed as HPC challenges during the last two editions of the Student Cluster Competition at ISC where all the authors have been involved operating an Arm-based cluster and awarded with the Fan Favorite award., The research leading to these results has received funding from the European Community's Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects [3], grant agreements n. 288777, 610402 and 671697. The authors would also like to thank E4 Computer Engineering for providing part of the hardware resources needed for the evaluation carried out in this poster as well as for greatly supporting the Student Cluster Competition team., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

The Mont-Blanc prototype: an alternative approach for HPC systems

  • Rajovic, Nikola
  • Rico, Alejandro
  • Mantovani, Filippo
  • Ruiz, Daniel
  • Vlarrubi, Josep O.
  • Gomez, Constantino
  • Backes, Luna
  • Nieto, Diego
  • Servat, Harald
  • Martorell Bofill, Xavier
  • Labarta Mancho, Jesús José
  • Ayguadé Parra, Eduard
  • Adeniyi-Jones, Chris
  • Derradji, Said
  • Gloaguen, Hervé
  • Lanucara, Piero
  • Sanna, Nico
  • Mehaut, Jean-François
  • Pouget, Kevin
  • Videau, Brice
  • Boyer, Eric
  • Allalen, Momme
  • Auweter, Axel
  • Brayford, David
  • Tafani, Daniele
  • Weinberg, Volker
  • Brömmel, Dirk
  • Halver, René
  • Meinke, Jan H.
  • Beivide Palacio, Ramon
  • Benito, Mariano
  • Vallejo, Enrique
  • Valero Cortés, Mateo
  • Ramirez, Alex
High-performance computing (HPC) is recognized as one of the pillars for further progress in science, industry, medicine, and education. Current HPC systems are being developed to overcome emerging architectural challenges in order to reach Exascale level of performance, projected for the year 2020. The much larger embedded and mobile market allows for rapid development of intellectual property (IP) blocks and provides more flexibility in designing an application specific system-on-chip (SoC), in turn providing the possibility in balancing performance, energy-efficiency, and cost. In the Mont-Blanc project, we advocate for HPC systems being built from such commodity IP blocks, currently used in embedded and mobile SoCs. As a first demonstrator of such an approach, we present the Mont-Blanc prototype; the first HPC system built with commodity SoCs, memories, and network interface cards (NICs) from the embedded and mobile domain, and off-the-shelf HPC networking, storage, cooling, and integration solutions. We present the system’s architecture and evaluate both performance and energy efficiency. Further, we compare the system’s abilities against a production level supercomputer. At the end, we discuss parallel scalability and estimate the maximum scalability point of this approach across a set of applications., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Filling the gap between education and industry: evidence-based methods for introducing undergraduate students to HPC

  • Mantovani, Filippo
  • Banchelli, Fabio
Educational institutions provide in most cases basic theoretical background covering several computational science topics, however High Performance Computing (HPC) and Parallel and Distributed Computing (PDC) markets require specialized technical profiles. Even the most skilled students are often not prepared to face production HPC applications of thousands of lines nor complex computational frameworks from other disciplines nor heterogeneous multinode machines accessed by hundreds of users. In this paper, we offer an educational package for filling this gap. Leveraging the 4-years experience of the Student Cluster Competition, we present our educational journey together with the lessons learned and the outcomes of our methodology. We show how, in a time span of a semester and an affordable budget, a university can implement an educational package preparing pupils for starting competitive professional careers. Our findings also highlight that 78% of the students exposed to our methods remain within the HPC high-education, research or industry., The authors of this paper and the participants in the SCC have been supported by the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects, grant agreements n. 288777, 610402 and 671697; the HPC Advisory Council; the Facultat d’Informàtica de Barcelona – Universitat Politècnica de Catalunya; Arm Ltd.; Cavium Inc.; E4 Computer Engineering. We warmly thank Luna Backes Drault for her unconditioned dedication to the SCC cause in the early days and the pizzeria 7bello in Frankfurt for always having a table and a smile for us., Si, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Implementation of the K-Means Algorithm on Heterogeneous Devices: A Use Case Based on an Industrial Dataset

  • Xu, Ying hao
  • Vidal, Miquel
  • Arejita, Beñat
  • Diaz, Javier
  • Alvarez, Carlos
  • Jiménez González, Daniel
  • Martorell Bofill, Xavier
  • Mantovani, Filippo
This paper presents and analyzes a heterogeneous implementation of an industrial use case based on K-means that targets symmetric multiprocessing (SMP), GPUs and FPGAs. We present how the application can be optimized from an algorithmic point of view and how this optimization performs on two heterogeneous platforms. The presented implementation relies on the OmpSs programming model, which introduces a simplified pragma-based syntax for the communication between the main processor and the accelerators. Performance improvement can be achieved by the programmer explicitly specifying the data memory accesses or copies. As expected, the newer SMP+GPU system studied is more powerful than the older SMP+FPGA system. However the latter is enough to fulfill the requirements of our use case and we show that uses less energy when considering only the active power of the execution., This work is partially supported by the European Union H2020 project AXIOM (grant agreement n. 645496), HiPEAC (grant agreement n. 687698), and Mont-Blanc (grant agreements n. 288777, 610402 and 671697), the Spanish Government Programa Severo Ochoa (SEV-2015-0493), the Spanish Ministry of Science and Technology (TIN2015- 65316-P) and the Departament d’Innovació, Universitats i Empresa de la Generalitat de Catalunya, under project MPEXPAR: Models de Programaci´o i Entorns d’Execució Paral·lels (2014-SGR-1051)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Comparison based sorting for systems with multiple GPUs

  • Tanasic, Ivan
  • Vilanova, Lluís
  • Jorda, Marc
  • Cabezas, Javier
  • Gelado Fernandez, Isaac
  • Navarro, Nacho
  • Hwu, Wen-mei W.
As a basic building block of many applications, sorting algorithms that efficiently run on modern machines are key for the performance of these applications. With the recent shift to using GPUs for general purpose compuing, researches have proposed several sorting algorithms for single-GPU systems. However, some workstations and HPC systems have multiple GPUs, and applications running on them are designed to use all available GPUs in the system. In this paper we present a high performance multi-GPU merge sort algorithm that solves the problem of sorting data distributed across several GPUs. Our merge sort algorithm first sorts the data on each GPU using an existing single-GPU sorting algorithm. Then, a series of merge steps produce a globally sorted array distributed across all the GPUs in the system. This merge phase is enabled by a novel pivot selection algorithm that ensures that merge steps always distribute data evenly among all GPUs. We also present the implementation of our sorting algorithm in CUDA, as well as a novel inter-GPU communication technique that enables this pivot selection algorithm. Experimental results show that an efficient implementation of our algorithm achieves a speed up of 1.9x when running on two GPUs and 3.3x when running on four GPUs, compared to sorting on a single GPU. At the same time, it is able to sort two and four times more records, compared to sorting on one GPU., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Multi-Node Advanced Performance and Power Analysis with Paraver

  • Mantovani, Filippo
  • Calore, Enrico
Performance analysis tools allow application developers to identify and characterize the inefficiencies that cause performance degradation in their codes. Due to the increasing interest in the High Performance Computing (HPC) community towards energy-efficiency issues, it is of paramount importance to be able to correlate performance and power figures within the same profiling and analysis tools. For this reason, we present a preliminary performance and energy-efficiency study aimed at demonstrating how a single tool can be used to collect most of the relevant metrics. Moreover we show how the same analysis techniques are applicable on different architectures, analyzing the same HPC application running on two clusters, based respectively on Intel Haswell and Arm Cortex-A57 CPUs., The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects, grant agreements n. 288777, 610402 and 671697. E.C. was partially founded by “Contributo 5 per mille assegnato all’Universit`a degli Studi di Ferrara - dichiarazione dei redditi dell’anno 2014”., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Energy Analysis of a 4D Variational Data Assimilation Algorithm and Evaluation on ARM-Based HPC Systems

  • Arcucci, Rossella
  • Basciano, Davide
  • Cilardo, Alessandro
  • D'Amore, Luisa
  • Mantovani, Filippo
Driven by the emerging requirements of High Performance Computing (HPC) architectures, the main focus of this work is the interplay of computational and energetic aspects of a Four Dimensional Variational (4DVAR) Data Assimilation algorithm, based on Domain Decomposition (named DD-4DVAR). We report first results on the energy consumption of the DD-4DVAR algorithm on embedded processor and a mathematical analysis of the energy behavior of the algorithm by assuming the architectures characteristics as variable of the model. The main objective is to capture the essential operations of the algorithm exhibiting a direct relationship with the measured energy. The experimental evaluation is carried out on a set of mini-clusters made available by the Barcelona Supercomputing Center., The research has received funding from European Commission under H2020-MSCA-RISE NASDAC project (grant agreement no. 691184) FP7 Mont-Blanc and Mont-Blanc 2 (grant agreements no. 288777 and 610402), H2020-FET Mont-Blanc 3 (grant agreement 671697)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Computational Fluid and Particle Dynamics Simulations for Respiratory System: Runtime Optimization on an Arm Cluster

  • Garcia-Gasulla, Marta
  • Josep-Fabrego, Marc
  • Eguzkitza, Beatriz
  • Mantovani, Filippo
Computational fluid and particle dynamics simulations (CFPD) are of paramount importance for studying and improving drug effectiveness. Computational requirements of CFPD codes involves high-performance computing (HPC) resources. For these reasons we introduce and evaluate in this paper system software techniques for improving performance and tolerate load imbalance on a state-of-the-art production CFPD code. We demonstrate benefits of these techniques on both Intel- and Arm-based HPC clusters showing the importance of using mechanisms applied at runtime to improve the performance independently of the underlying architecture. We run a real CFPD simulation of particle tracking on the human respiratory system, showing performance improvements of up to 2X, keeping the computational resources constant., This work is partially supported by the Spanish Government (SEV-2015-0493), by the Spanish Ministry of Science and Technology project (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), and by the European Mont-Blanc projects (288777, 610402 and 671697)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Advanced Performance Analysis of HPC Workloads on Cavium ThunderX

  • Calore, Enrico
  • Mantovani, Filippo
  • Ruiz, Daniel
The interest towards Arm based platforms as HPC solutions increased significantly during the last 5 years. In this paper we show that, in contrast to the early days of pioneer tests, several application performance analysis techniques can now be applied also to Arm based SoCs. To show the possibilities offered by the available tools, we provide as an example, the analysis of a Lattice Boltzmann HPC production code, highly optimized for several architectures and now ported also to Armv8. We tested it on a system based on a production silicon, Cavium CN8890 SoC. In particular, as performance analysis tools we adopt Extrae and Paraver, making use of the PAPI support, initially developed by us for the ThunderX platform, and now available also upstream. The contribution of this paper is twofold: first, we demonstrate that performance analysis tools available on standard HPC platforms, independently from the CPU providers, are nowadays available also for Arm SoCs; second, we actually optimize an HPC application for this platforms, showing similarities with other architectures., The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects [15], grant agreements n. 288777, 610402 and 671697. E.C. was partially founded by “Contributo 5 per mille assegnato all’Università degli Studi di Ferrara - dichiarazione dei redditi dell’anno 2014”. Cavium Inc. has kindly supported this research providing access to documentation and platforms., Postprint (author's final draft)