Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

Standard quasi-conformal flattening of the right and left atria

  • Nuñez-Garcia, Marta
  • Bernardino Perez, Gabriel
  • Doste Beltrán, Rubén
  • Zhao, Jichao
  • Camara, Oscar
  • Butakoff, Constantine
Two-dimensional standard representations of 3D anatomical structures are a simple and intuitive way for analysing patient information across populations and image modalities. They also allow convenient visualizations that can be included in clinical reports for a fast overview of the whole structure. While cardiac ventricles, especially the left ventricle, have an established standard representation (e.g. bull’s eye plot), the 2D depiction of the left (LA) and right atrium (RA) remains challenging due to their sub-structural complexity. Quasi-conformal flattening techniques, successfully applied to cardiac ventricles, require additional constraints in the case of the atria to correctly place the adjacent structures, i.e. the pulmonary veins, the vena cava (VC) or the appendages. Some registration-based methods exist to flatten the LA but they can be time-consuming and prone to errors if the geometries are very different. We propose a novel atrial flattening methodology where a quasi-conformal 2D map of both (left and right) atria is obtained quickly and without errors related to registration. In our approach the RA is mapped to a standard 2D map where the holes corresponding to superior and inferior VC are fixed within a disk. Similarly, the LA is divided into 5 regions which are then mapped to their analogous two-dimensional regions. We illustrate the application of the method to visualize atrial wall thickness measurements, and late gadolinium enhanced magnetic resonance data., This study was partially funded by the Spanish Ministry of Economy and Competitiveness (DPI2015-71640-R), by the “Fundació La Marató de TV3” (no 20154031) and by European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

Assessment of haemodynamic remodeling in fetal aortic coarctation using a lumped model of the circulation

  • Giménez Mínguez, Paula
  • Bijnens, Bart
  • Bernardino Perez, Gabriel
  • Lluch Álvarez, Èric
  • Soveral, Iris
  • Gómez, Olga
  • García Cañadilla, Patricia, 1985-
Comunicació presentada a: the 9th International Conference Functional Imaging and Modelling of the Heart FIMH 2017, celebrat de l'11 al 13 de juny de 2017 a Toronto, Canadà., Aortic coarctation is one of the most difficult cardiac defects to diagnose before birth, and it accounts for 8% of congenital heart diseases. Antenatal diagnosis is crucial for early treatment of the neonate and to decrease the risk of morbidity and mortality; however the fetal hemodynamic changes are not fully understood and current imaging methods are limited to accurately diagnosis this congenital defect. Objective: We propose to use a lumped model of the fetal circulation to provide insights into the hemodynamic changes in fetuses with aortic coarctation, and thus helping to improve its diagnosis. Methods: To achieve this goal a patient-specific lumped model of the fetal circulation was implemented in OpenCOR, including the modeling of different types and degrees of aortic coarctation. A parametric study of degree and type of coarctation was performed, where blood flow distribution, cerebroplacental ratio, pressure drop over the coarctation and left ventricular pressure were quantified. Results: Obvious changes in the fetal hemodynamics were observed only from 80% of coarctation, corresponding to the clinically used cutoff for pressure drop of 20 mmHg. Furthermore, the observed hemodynamic changes were different depending on the location and degree of the coarctation., This study was partially supported by the Spanish Ministry of Economy and Competitiveness (grant TIN2014-52923-R; Maria de Maeztu Units of Excellence Programme - MDM-2015-0502), FEDER and the European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

Smoothed particle hydrodynamics for electrophysiological modeling: an alternative to finite element methods

  • Lluch Álvarez, Èric
  • Doste Beltrán, Rubén
  • Giffard-Roisin, Sophie
  • This, Alexandre
  • Sermesant, Maxime
  • Camara, Oscar
  • Craene, Mathieu de
  • Morales, Hernán G.
Comunicació presentada a la 9th international conference on Functional Imaging and Modeling of the Heart (FIMH 2017), celebrada els dies 11 a 13 de juny de 2017 a Toronto, Canadà., Finite element methods (FEM) are generally used in cardiac 3D-electromechanical modeling. For FEM modeling, a step of a suitable mesh construction is required, which is non-trivial and time-consuming for complex geometries. A meshless method is proposed to avoid meshing. The smoothed particle hydrodynamics (SPH) method was used to solve an electrophysiological model on a left ventricle extracted from medical imaging straightforwardly, without any need of a complex mesh. The proposed method was compared against FEM in the same left-ventricular model. Both FEM and SPH methods provide similar solutions of the models in terms of depolarization times. Main differences were up to 10.9% at the apex. Finally, a pathological application of SPH is shown on the same ventricular geometry with an added scar on the heart wall., The work is supported by the European Union Horizon 2020 research and innovation programme under grant agreement No 642676 (CardioFunXion).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

Estimating 3D ventricular shape from 2D echocardiography: feasibility and effect of noise

  • Bernardino Perez, Gabriel
  • Butakoff, Constantine
  • Nuñez-Garcia, Marta
  • Sarvari, Sebastian Imre
  • Rodríguez-López, Mérida
  • Crispi Brillas, Fàtima
  • González Ballester, Miguel Ángel, 1973-
  • Craene, Mathieu de
  • Bijnens, Bart
Comunicació presentada a la 9th international conference on Functional Imaging and Modeling of the Heart (FIMH 2017), celebrada els dies 11 a 13 de juny de 2017 a Toronto, Canadà., Many cardiac diseases are associated with changes in ventricular shape. However, in daily practice, the heart is mostly assessed by 2D echocardiography only. While 3D techniques are available, they are rarely used. In this paper we analyze to which extent it is possible to obtain the 3D shape of a left ventricle (LV) using measurements from 2D echocardiography. First, we investigate this using synthetic datasets, and afterwards, we illustrate it in clinical 2D echocardiography measurements with corresponding 3D meshes obtained using 3D echocardiography. We demonstrate that standard measurements taken in 2D allow quantifying only the ellipsoidal shape of the ventricle, and that capturing other shape features require either additional geometrical measurements or clinical information related to shape remodelling. We show that noise in the measurements is the primary cause for poor association between the measurements and the LV shape features and that an estimated 10% level of noise on the 2D measurements limits the recoverability of shape. Finally we show that clinical variables relating to the clinical history can substitute the lack of geometric measurements, thus providing alternatives for shape assessment in daily practice., This study was partially supported by the Spanish Ministry of Economy and Competitiveness (grant TIN2014-52923-R; Maria de Maeztu Units of Excellence Programme - MDM-2015-0502), FEDER and the European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

A Monte Carlo tree search approach to learning decision trees

  • Nunes, Cecília
  • Craene, Mathieu de
  • Langet, Hélène
  • Camara, Oscar
  • Jonsson, Anders, 1973-
Comunicació presentada a: 17th IEEE International Conference on Machine Learning and Applications (ICMLA) celebrada del 17 al 20 de 2018 a Orlando, Estats Units., Decision trees (DTs) are a widely used prediction tool, owing to their interpretability. Standard learning methods follow a locally-optimal approach that trades off prediction performance for computational efficiency. Such methods can however be far from optimal, and it may pay off to spend more computational resources to increase performance. Monte Carlo tree search (MCTS) is an approach to approximate optimal choices in exponentially large search spaces. Since exploring the space of all possible DTs is computationally intractable, we propose a DT learning approach based on MCTS. To bound the branching factor of MCTS, we limit the number of decisions at each level of the search tree, and introduce mechanisms to balance exploration, DT size and the statistical significance of the predictions. To mitigate the computational cost of our method, we employ a move pruning strategy that discards some branches of the search tree, leading to improved performance. The experiments show that our approach outperformed locally optimal search in 20 out of 31 datasets, with a reduction in DT size in most of the cases., This work is supported by the European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

A Rule-Based method to model myocardial fiber orientation for simulating ventricular outflow tract arrhythmias

  • Doste Beltrán, Rubén
  • Soto-Iglesias, David
  • Bernardino Perez, Gabriel
  • Sebastián Aguilar, Rafael, 1978-
  • Giffard-Roisin, Sophie
  • Cabrera-Lozoya, Rocío
  • Sermesant, Maxime
  • Berruezo Sánchez, Antonio
  • Sánchez-Quintana, Damián
  • Camara, Oscar
Comunicació presentada a: FIMH 2017 9th International Conference, celebrada a Toronto, Canadà, de l'11 al 13 de juny de 2017., Myocardial fiber orientation determines the propagation of electrical waves in the heart and the contraction of cardiac tissue. One common approach for assigning fiber orientation to cardiac anatomi- cal models are Rule-Based Methods (RBM). However, RBM have been developed to assimilate data mostly from the Left Ventricle. In conse- quence, fiber information from RBM does not match with histological data in other areas of the heart, having a negative impact in cardiac simulations beyond the LV. In this work, we present a RBM where fiber orientation is separately modeled in each ventricle following observations from histology. This allows to create detailed fiber orientation in specific regions such as the right ventricle endocardium, the interventricular sep- tum and the outow tracts. Electrophysiological simulations including these anatomical structures were then performed, with patient-specific data of outow tract ventricular arrhythmias (OTVA) cases. A compar- ison between the obtained simulations and electro-anatomical data of these patients confirm the potential for in silico identification of the site of origin in OTVAs before the intervention., This work was partially funded by the European Union under the Horizon 2020 Programme for Research, Innovation (grant agreement No. 642676 CardioFunX- ion)
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

Personalized computational framework to study arrhythmia mechanisms on top of ECGI-detected sub-strate

  • Cluitmans, Matthijs J.M.
  • Lluch Álvarez, Èric
  • Morales, Hernán G.
  • Heijman, Jordi
  • Vaulders, Paul
Comunicació presentada a: Computing in Cardiology Conference (CinC) celebrat del 23 al 26 de setembre de 2018 a Maastricht, Països Baixos., Electrocardiographic Imaging (ECGI) can unmask electrical abnormalities that were difficult to detect using the standard 12-lead ECG. However, it is still challenging to interpret the potential arrhythmogenic consequence of electrical patterns found with ECGI. Here, we introduce a computational framework that allows personalized simulations of cardiac electrophysiology (EP) to mimic electrical substrate as detected in an individual, to study the interaction between that substrate and premature ventricular complexes (PVCs). In patient data, electrical substrate identified using ECGI shows regions of pronounced dispersion of local recovery (i.e., recovery gradients). A computational model of ventricular EP was developed and then used to mimic the recovery gradients and PVCs found in patients. We studied a variety of gradients (6-98 ms/cm) and coupling intervals of the extra stimulus (-70 to +260 ms relative to the end of local recovery), which showed that re-entry can only occur when dispersion of recovery is large (≥76 ms/cm), and the extra stimulus occurs just after local recovery ended (~+40 ms). In conclusion, this computational framework allows to identify the specific conditions under which ECGI-detected substrates and PVCs can lead to re-entry in a personalized approach., This work is supported by the European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

Characterizing patterns of response during mild stress-testing in continuous echocardiography recordings using a multiview dimensionality reduction technique

  • Nogueira, Mariana
  • Piella Fenoy, Gemma
  • Sanchez Martinez, Sergio
  • Langet, Hélène
  • Saloux, Eric
Comunicació presentada a: 9th international conference on Functional Imaging and Modeling of the Heart (FIMH 2017), celebrada de l'11 al 13 de juny de 2017 a Toronto, Canada., In this paper, we capture patterns of response to cardiac stress-testing using a multiview dimensionality reduction technique that allows the compact representation of patient response to stress, regarding multiple features over consecutive cycles, as a low-dimensional trajectory. In this low-dimensional space, patients can be compared and clustered in distinct healthy and pathological responses, and the patterns that characterize each of them can be reconstructed. Experiments were performed on (a) synthetic data simulating different types of response and (b) a real acquisition during a cold pressor test. Results show that the proposed approach allows the clustering of healthy and pathological responses, as well as the reconstruction of characteristic patterns of such responses, in terms of multiple features of interest., This work is supported by the European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Estimating 3D ventricular shape from 2D echocardiography: feasibility and effect of noise

  • Bernardino Perez, Gabriel
  • Butakoff, Constantine
  • Nuñez-Garcia, Marta
  • Sarvari, Sebastian Imre
  • Rodríguez-López, Mérida
  • Crispi Brillas, Fàtima
  • González Ballester, Miguel Ángel, 1973-
  • Craene, Mathieu de
  • Bijnens, Bart
Comunicació presentada a la 9th international conference on Functional Imaging and Modeling of the Heart (FIMH 2017), celebrada els dies 11 a 13 de juny de 2017 a Toronto, Canadà., Many cardiac diseases are associated with changes in ventricular shape. However, in daily practice, the heart is mostly assessed by 2D echocardiography only. While 3D techniques are available, they are rarely used. In this paper we analyze to which extent it is possible to obtain the 3D shape of a left ventricle (LV) using measurements from 2D echocardiography. First, we investigate this using synthetic datasets, and afterwards, we illustrate it in clinical 2D echocardiography measurements with corresponding 3D meshes obtained using 3D echocardiography. We demonstrate that standard measurements taken in 2D allow quantifying only the ellipsoidal shape of the ventricle, and that capturing other shape features require either additional geometrical measurements or clinical information related to shape remodelling. We show that noise in the measurements is the primary cause for poor association between the measurements and the LV shape features and that an estimated 10% level of noise on the 2D measurements limits the recoverability of shape. Finally we show that clinical variables relating to the clinical history can substitute the lack of geometric measurements, thus providing alternatives for shape assessment in daily practice., This study was partially supported by the Spanish Ministry of Economy and Competitiveness (grant TIN2014-52923-R; Maria de Maeztu Units of Excellence Programme - MDM-2015-0502), FEDER and the European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Assessment of haemodynamic remodeling in fetal aortic coarctation using a lumped model of the circulation

  • Giménez Mínguez, Paula
  • Bijnens, Bart
  • Bernardino Perez, Gabriel
  • Lluch Álvarez, Èric
  • Soveral, Iris
  • Gómez, Olga
  • García Cañadilla, Patricia, 1985-
Comunicació presentada a: the 9th International Conference Functional Imaging and Modelling of the Heart FIMH 2017, celebrat de l'11 al 13 de juny de 2017 a Toronto, Canadà., Aortic coarctation is one of the most difficult cardiac defects to diagnose before birth, and it accounts for 8% of congenital heart diseases. Antenatal diagnosis is crucial for early treatment of the neonate and to decrease the risk of morbidity and mortality; however the fetal hemodynamic changes are not fully understood and current imaging methods are limited to accurately diagnosis this congenital defect. Objective: We propose to use a lumped model of the fetal circulation to provide insights into the hemodynamic changes in fetuses with aortic coarctation, and thus helping to improve its diagnosis. Methods: To achieve this goal a patient-specific lumped model of the fetal circulation was implemented in OpenCOR, including the modeling of different types and degrees of aortic coarctation. A parametric study of degree and type of coarctation was performed, where blood flow distribution, cerebroplacental ratio, pressure drop over the coarctation and left ventricular pressure were quantified. Results: Obvious changes in the fetal hemodynamics were observed only from 80% of coarctation, corresponding to the clinically used cutoff for pressure drop of 20 mmHg. Furthermore, the observed hemodynamic changes were different depending on the location and degree of the coarctation., This study was partially supported by the Spanish Ministry of Economy and Competitiveness (grant TIN2014-52923-R; Maria de Maeztu Units of Excellence Programme - MDM-2015-0502), FEDER and the European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A Rule-Based method to model myocardial fiber orientation for simulating ventricular outflow tract arrhythmias

  • Doste Beltrán, Rubén
  • Soto-Iglesias, David
  • Bernardino Perez, Gabriel
  • Sebastián Aguilar, Rafael, 1978-
  • Giffard-Roisin, Sophie
  • Cabrera-Lozoya, Rocío
  • Sermesant, Maxime
  • Berruezo Sánchez, Antonio
  • Sánchez-Quintana, Damián
  • Camara, Oscar
Comunicació presentada a: FIMH 2017 9th International Conference, celebrada a Toronto, Canadà, de l'11 al 13 de juny de 2017., Myocardial fiber orientation determines the propagation of electrical waves in the heart and the contraction of cardiac tissue. One common approach for assigning fiber orientation to cardiac anatomi- cal models are Rule-Based Methods (RBM). However, RBM have been developed to assimilate data mostly from the Left Ventricle. In conse- quence, fiber information from RBM does not match with histological data in other areas of the heart, having a negative impact in cardiac simulations beyond the LV. In this work, we present a RBM where fiber orientation is separately modeled in each ventricle following observations from histology. This allows to create detailed fiber orientation in specific regions such as the right ventricle endocardium, the interventricular sep- tum and the outow tracts. Electrophysiological simulations including these anatomical structures were then performed, with patient-specific data of outow tract ventricular arrhythmias (OTVA) cases. A compar- ison between the obtained simulations and electro-anatomical data of these patients confirm the potential for in silico identification of the site of origin in OTVAs before the intervention., This work was partially funded by the European Union under the Horizon 2020 Programme for Research, Innovation (grant agreement No. 642676 CardioFunX- ion)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A Monte Carlo tree search approach to learning decision trees

  • Nunes, Cecília
  • Craene, Mathieu de
  • Langet, Hélène
  • Camara, Oscar
  • Jonsson, Anders, 1973-
Comunicació presentada a: 17th IEEE International Conference on Machine Learning and Applications (ICMLA) celebrada del 17 al 20 de 2018 a Orlando, Estats Units., Decision trees (DTs) are a widely used prediction tool, owing to their interpretability. Standard learning methods follow a locally-optimal approach that trades off prediction performance for computational efficiency. Such methods can however be far from optimal, and it may pay off to spend more computational resources to increase performance. Monte Carlo tree search (MCTS) is an approach to approximate optimal choices in exponentially large search spaces. Since exploring the space of all possible DTs is computationally intractable, we propose a DT learning approach based on MCTS. To bound the branching factor of MCTS, we limit the number of decisions at each level of the search tree, and introduce mechanisms to balance exploration, DT size and the statistical significance of the predictions. To mitigate the computational cost of our method, we employ a move pruning strategy that discards some branches of the search tree, leading to improved performance. The experiments show that our approach outperformed locally optimal search in 20 out of 31 datasets, with a reduction in DT size in most of the cases., This work is supported by the European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Standard quasi-conformal flattening of the right and left atria

  • Nuñez-Garcia, Marta
  • Bernardino Perez, Gabriel
  • Doste Beltrán, Rubén
  • Zhao, Jichao
  • Camara, Oscar
  • Butakoff, Constantine
Two-dimensional standard representations of 3D anatomical structures are a simple and intuitive way for analysing patient information across populations and image modalities. They also allow convenient visualizations that can be included in clinical reports for a fast overview of the whole structure. While cardiac ventricles, especially the left ventricle, have an established standard representation (e.g. bull’s eye plot), the 2D depiction of the left (LA) and right atrium (RA) remains challenging due to their sub-structural complexity. Quasi-conformal flattening techniques, successfully applied to cardiac ventricles, require additional constraints in the case of the atria to correctly place the adjacent structures, i.e. the pulmonary veins, the vena cava (VC) or the appendages. Some registration-based methods exist to flatten the LA but they can be time-consuming and prone to errors if the geometries are very different. We propose a novel atrial flattening methodology where a quasi-conformal 2D map of both (left and right) atria is obtained quickly and without errors related to registration. In our approach the RA is mapped to a standard 2D map where the holes corresponding to superior and inferior VC are fixed within a disk. Similarly, the LA is divided into 5 regions which are then mapped to their analogous two-dimensional regions. We illustrate the application of the method to visualize atrial wall thickness measurements, and late gadolinium enhanced magnetic resonance data., This study was partially funded by the Spanish Ministry of Economy and Competitiveness (DPI2015-71640-R), by the “Fundació La Marató de TV3” (no 20154031) and by European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Personalized computational framework to study arrhythmia mechanisms on top of ECGI-detected sub-strate

  • Cluitmans, Matthijs J.M.
  • Lluch Álvarez, Èric
  • Morales, Hernán G.
  • Heijman, Jordi
  • Vaulders, Paul
Comunicació presentada a: Computing in Cardiology Conference (CinC) celebrat del 23 al 26 de setembre de 2018 a Maastricht, Països Baixos., Electrocardiographic Imaging (ECGI) can unmask electrical abnormalities that were difficult to detect using the standard 12-lead ECG. However, it is still challenging to interpret the potential arrhythmogenic consequence of electrical patterns found with ECGI. Here, we introduce a computational framework that allows personalized simulations of cardiac electrophysiology (EP) to mimic electrical substrate as detected in an individual, to study the interaction between that substrate and premature ventricular complexes (PVCs). In patient data, electrical substrate identified using ECGI shows regions of pronounced dispersion of local recovery (i.e., recovery gradients). A computational model of ventricular EP was developed and then used to mimic the recovery gradients and PVCs found in patients. We studied a variety of gradients (6-98 ms/cm) and coupling intervals of the extra stimulus (-70 to +260 ms relative to the end of local recovery), which showed that re-entry can only occur when dispersion of recovery is large (≥76 ms/cm), and the extra stimulus occurs just after local recovery ended (~+40 ms). In conclusion, this computational framework allows to identify the specific conditions under which ECGI-detected substrates and PVCs can lead to re-entry in a personalized approach., This work is supported by the European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Characterizing patterns of response during mild stress-testing in continuous echocardiography recordings using a multiview dimensionality reduction technique

  • Nogueira, Mariana
  • Piella Fenoy, Gemma
  • Sanchez Martinez, Sergio
  • Langet, Hélène
  • Saloux, Eric
Comunicació presentada a: 9th international conference on Functional Imaging and Modeling of the Heart (FIMH 2017), celebrada de l'11 al 13 de juny de 2017 a Toronto, Canada., In this paper, we capture patterns of response to cardiac stress-testing using a multiview dimensionality reduction technique that allows the compact representation of patient response to stress, regarding multiple features over consecutive cycles, as a low-dimensional trajectory. In this low-dimensional space, patients can be compared and clustered in distinct healthy and pathological responses, and the patterns that characterize each of them can be reconstructed. Experiments were performed on (a) synthetic data simulating different types of response and (b) a real acquisition during a cold pressor test. Results show that the proposed approach allows the clustering of healthy and pathological responses, as well as the reconstruction of characteristic patterns of such responses, in terms of multiple features of interest., This work is supported by the European Union Horizon 2020 Programme for Research and Innovation, under grant agreement No. 642676 (CardioFunXion).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Smoothed particle hydrodynamics for electrophysiological modeling: an alternative to finite element methods

  • Lluch Álvarez, Èric
  • Doste Beltrán, Rubén
  • Giffard-Roisin, Sophie
  • This, Alexandre
  • Sermesant, Maxime
  • Camara, Oscar
  • Craene, Mathieu de
  • Morales, Hernán G.
Comunicació presentada a la 9th international conference on Functional Imaging and Modeling of the Heart (FIMH 2017), celebrada els dies 11 a 13 de juny de 2017 a Toronto, Canadà., Finite element methods (FEM) are generally used in cardiac 3D-electromechanical modeling. For FEM modeling, a step of a suitable mesh construction is required, which is non-trivial and time-consuming for complex geometries. A meshless method is proposed to avoid meshing. The smoothed particle hydrodynamics (SPH) method was used to solve an electrophysiological model on a left ventricle extracted from medical imaging straightforwardly, without any need of a complex mesh. The proposed method was compared against FEM in the same left-ventricular model. Both FEM and SPH methods provide similar solutions of the models in terms of depolarization times. Main differences were up to 10.9% at the apex. Finally, a pathological application of SPH is shown on the same ventricular geometry with an added scar on the heart wall., The work is supported by the European Union Horizon 2020 research and innovation programme under grant agreement No 642676 (CardioFunXion).