Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

BIRD. BCAM's Institutional Repository Data
Publication Contribución de congreso (ConferenceOutput)

LBM-HPC - An open-source tool for fluid simulations. Case study: Unified parallel C (UPC-PGAS)

  • Valero-Lara, P.
  • Jansson, J.
The main motivation of this work is the evaluation of the Unified Parallel C (UPC) model, for Boltzmann-fluid simulations. UPC is one of the current models in the so-called Partitioned Global Address Space paradigm. This paradigm attempts to increase the simplicity of codes and achieve a better efficiency and scalability. Two different UPC-based implementations, explicit and implicit, are presented and evaluated. We compare the fundamental features of our UPC implementations with other parallel programming model, MPI-OpenMP. In particular each of the major steps of any LBM code, i.e., Boundary Conditions, Communication, and LBM solver, are analyzed.
BIRD. BCAM's Institutional Repository Data
Publication Contribución de congreso (ConferenceOutput)

A Non-uniform Staggered Cartesian Grid approach for Lattice-Boltzmann method

  • Valero-Lara, P.
  • Jansson, J.
We propose a numerical approach based on the Lattice-Boltzmann method (LBM) for dealing with mesh refinement of Non-uniform Staggered Cartesian Grid. We explain, in detail, the strategy for mapping LBM over such geometries. The main benefit of this approach, compared to others, consists of solving all fluid units only once per time-step, and also reducing considerably the complexity of the communication and memory management between different refined levels. Also, it exhibits a better matching for parallel processors. To validate our method, we analyze several standard test scenarios, reaching satisfactory results with respect to other stateof-the-art methods. The performance evaluation proves that our approach not only exhibits a simpler and efficient scheme for dealing with mesh refinement, but also fast resolution, even in those scenarios where our approach needs to use a higher number of fluid units.
BIRD. BCAM's Institutional Repository Data
Publication Contribución de congreso (ConferenceOutput)

ICCS 2017 Workshop on Agent-Based Simulations, Adaptive Algorithms and Solvers

  • Byrski, A.
  • Paszynski, M.
  • Schaefer, R.
  • Calo, V.M.
  • Pardo, D.
This workshop seeks to integrate results from different domains of computer science, computational science, and mathematics. We welcome simulation papers, either hard simulations using finite element or finite difference methods, or soft simulations by means of evolutionary computations, and related methods. The workshop focuses on simulations performed by using (a) agent-oriented systems; or (b) adaptive algorithms. Simulations performed by other kind of systems are also welcome. An agent-oriented system seems are attractive tools useful for numerous domains of applications. Adaptive algorithms significantly decrease on the computational cost by investing computational resources when needed by the problem.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

3D Simulations of Deep Directional Electromagnetic Tools in High-angle and Horizontal Wells

  • Puzyrev, Vladimir
  • Torres-Verdin, Carlos
The first author acknowledges the RISE Horizon 2020 European Project GEAGAM (644202) for the travel support and the Repsol-BSC Research Center for funding. All numerical tests were performed on the MareNostrum supercomputer of the Barcelona Supercomputing Center. We also acknowledge the University of Texas at Austin’s Research Consortium on Formation Evaluation., A new generation of deep directional electromagnetic imaging tools is being adopted by the industry to enhance the efficiency of well placement, reduce drilling risk and increase production potential. Schlumberger's GeoSphere reservoir service has been reported to reveal fluid-contact details and successfully map sand bodies more than 30 m from the wellbore. In this paper we employ 3D forward simulations for modeling-based interpretation of deep directional electromagnetic responses and present the results of independent feasibility studies. Optimal configurations for several induction frequencies are determined for various application conditions. This modeling algorithm will serve as a basis for a new inversion-based interpretation workflow.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Edge-elements for geophysical electromagnetic problems: a new implementation challenge

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • de la Puente, Josep
  • Puzyrev, Vladimir
  • Cela, José M.
Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Edge-based parallel framework for the simulation of 3d CSEM surveys

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Three-Dimensional CSEM Modelling on Unstructured Tetrahedral Meshes Using Edge Finite Elements

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • de la Puente, Josep
  • Cela, Jose M.
The last decade has been a period of rapid growth for electromagnetic methods (EM) in geophysics, mostly because of their industrial adoption. In particular, the marine controlled-source electromagnetic method (CSEM) has become an important technique for reducing ambiguities in data interpretation in hydrocarbon exploration. In order to be able to predict the EM signature of a given geological structure, modelling tools provide us with synthetic results which we can then compare to real data. On the other hand and among the modelling methods for EM based upon 3D unstructured meshes, the Nédélec Edge Finite Element Method (EFEM) offers a good trade-off between accuracy and number of degrees of freedom, i.e. size of the problem. Furthermore, its divergence-free basis is very well suited for solving Maxwell’s equation. On top of that, we present the numerical formulation and results of 3D CSEM modelling using the Parallel Edge-based Tool for Geophysical Electromagnetic Modelling (PETGEM) on unstructured tetrahedral meshes. We validated our experiments against quasi-analytical results in canonical models., Authors of this work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie-Sklodowska Curie grant agreement No. 644202. The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No. 689772. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACyT). Numerical tests in this work were performed on the MareNostrum supercomputer of the Barcelona Supercomputing Center - Centro Nacional de Supercomputación (www.bsc.es)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Parallel and numerical issues of the edge finite element method for 3D controlled-source electromagnetic surveys

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • de la Puente Álvarez, Josep
  • Puzyrev, Vladimir
  • Cela Espín, José M.|||0000-0002-0122-1468
This paper deals with the most relevant parallel and numerical issues that arise when applying the Edge Element Method in the solution of electromagnetic problems in exploration geophysics. In this sense, in recent years the application of land and marine controlled-source electromagnetic (CSEM) surveys has gained tremendous interest among the offshore exploration community. This method is especially significant in detecting hydrocarbon in shallow/deep waters. On the other hand, in Finite Element Methods for solving electromagnetic field problems, the use of Edge Elements has become very popular. In fact, Edge Elements are often said to be a cure to many difficulties that are encountered (particularly eliminating spurious solutions) and are claimed to yield accurate results. CSEM, linear vectorial edge basis functions and its implementation on unstructured tetrahedral meshes are discussed. The use of it’s kind of discretisation enables the representation of complex geological structures and allows local refinement in order to improve the solution’s accuracy. A parallel shared memory approach is proposed to meet the high computational cost of EM modeling. Performance results and an convergence study are presented in order to validate our numerical method., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 644202. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACYT)., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 644202. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACYT)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Improving edge finite element assembly for geophysical electromagnetic modelling on shared-memory architectures

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • de la Puente, Josep
  • Cela, Jose M.
This work presents a set of node-level optimizations to perform the assembly of edge finite element matrices that arise in 3D geophysical electromagnetic modelling on shared-memory architectures. Firstly, we describe the traditional and sequential assembly approach. Secondly, we depict our vectorized and shared-memory strategy which does not require any low level instructions because it is based on an interpreted programming language, namely, Python. As a result, we obtained a simple parallel-vectorized algorithm whose runtime performance is considerably better than sequential version. The set of optimizations have been included to the work-flow of the Parallel Edge-based Tool for Geophysical Electromagnetic Modelling (PETGEM) which is developed as open-source at the Barcelona Supercomputing Center. Finally, we present numerical results for a set of tests in order to illustrate the performance of our strategy., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 644202. The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No. 689772. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACYT). All numerical tests were performed on the MareNostrum supercomputer of the Barcelona Supercomputing Center - Centro Nacional de Supercomputación (www.bsc.es)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Assessment of edge-based finite element technique for geophysical electromagnetic problems: efficiency, accuracy and reliability

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • de la Puente, Josep
  • Puzyrev, Vladimir
  • Cela, José M.
In Finite Element Methods for solving electromagnetic field problems, the use of Edge Elements has become very popular. In fact, Edge Elements are often said to be a cure to many difficulties that are encountered (particularly eliminating spurious solutions) and are claimed to yield accurate results [9, 16, 17]. We will shortly describe the mathematical formulation of linear edge elements and we go through the particular issues related to the implementation of these elements in order to solve geophysical electromagnetic problems. In particular, we describe a simple, flexible and parallel Fortran 90 implementation for Edge Elements. The code is based on an abstract data structure, which allows to use different kinds of solvers with little effort. The result is an implementation that allows users to specify Edge-based Finite Element variational forms of H(curl). Finally, we also show the performance of the code in terms of efficiency, accuracy and reliability, which will shape our future line of work in order to solve more complex problems., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Edge-based electric field formulation in 3D CSEM simulations: A parallel approach

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • de la Puente Álvarez, Josep
  • Puzyrev, Vladimir
  • Cela Espín, José M.|||0000-0002-0122-1468
This paper presents a parallel computing scheme for the data computation that arise when applying one of the most popular electromagnetic methods in exploration geophysics, namely, controlled-source electromagnetic (CSEM). The computational approach is based on linear edge finite element method in 3D isotropic domains. The total electromagnetic field is decomposed into primary and secondary electromagnetic field. The primary field is calculated analytically using an horizontal layered-earth model and the secondary field is discretized by linear edge finite element method. We pre-calculated the primary field through of an embarrassingly-parallel framework in order to exploit the parallelism and the advantages of geometric flexibility. The numerical-computational formulation presented here is able to work with three different orientations for the dipole or excitation source. Our code is implemented on unstructured tetrahedral meshes because are able to represent complex geological structures and they allow local refinement in order to improve the solution’s accuracy. The code’s performance is studied through a test of scalability., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 644202. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACYT)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Mimetic Operators for Seismic Exploration

  • de la Puente, Josep
  • Rojas, Otilio
  • Ferrer, Miguel
  • Kormann, Jean
Mimetic operators are a kind of discrete operators which, on staggered grids, can accomplish "mimetic" properties analogous to their continuous counterparts. Furthermore, they can attain identical convergence order everywhere in the domain, including at or near the domain's boundaries in non-periodic problems. This property makes mimetic finite difference (MFD) operators attractive whenever high-contrast interfaces or physical boundary conditions are present in our models. In the seismic case, the strongest boundary condition is the interface between Earth and air, the so-called free surface. This surface is typically represented as a traction-free boundary condition and, although it is of critical importance for achieving accurate results, due to its vicinity to the sources and receivers, it is still a problem for current FD implementations. Despite efforts in the past, few FD schemes have attained convergence of order beyond two in results involving the free surface. Here we summarize the properties of mimetic operators applied to the elastic wave equation, as well as the changes required in order to incorporate into current explicit staggered grid codes the mimetic approach of the free-surface condition., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 644602. The research leading to these results has received funding from the European Union’s Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No 689772., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

3D Elastic Full Waveform Inversion - On Land Study case

  • Kormann, Jean
  • Marti, David
  • Rodríguez, Juan E.
  • Marzan, Ignacio
  • Gutiérrez, Natalia|||0000-0001-7921-7322
  • Ferrer, Miguel
  • Hanzich, Mauricio
  • de la Puente, Josep
  • Carbonell, Ramon
  • Cela, Jose M.
  • Fernández, S.
Full Waveform Inversion is one of the most advanced processing methods that is recently reaching a mature state after years of solving theoretical and technical issues such as the non-uniqueness of the solution and harnessing the huge computational power required by realistic scenarios. In this work, we present the application of this method to a 3D on-land dataset acquired to characterize the shallow subsurface. The current study explores the possibility to apply elastic isotropic Full Waveform Inversion using only the vertical component of the recorded seismograms. One of the main challenges in this case study remains the costly 3D modeling that includes topography and free surface effects. Nevertheless, the resulting models provide a higher resolution of the subsurface structures than starting models, and show a good correlation with the available borehole measurements., The authors thank Repsol for the permission to publish the present research and for funding through the Aurora project. J. Kormann also thankfully acknowledges the Spanish Supercomputing Network (RES) through grant FI-2014-2-0009. Funding support for the data acquisition and access to the available geophysical data was provided by ENRESA. The GFZ Instrument Pool provided the instrumentation for the data acquisition. This project was partially funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 644602., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Edge-elements for geophysical electromagnetic problems: a new implementation challenge

Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

3D Simulations of Deep Directional Electromagnetic Tools in High-angle and Horizontal Wells

  • Puzyrev, Vladimir
  • Torres-Verdin, Carlos
The first author acknowledges the RISE Horizon 2020 European Project GEAGAM (644202) for the travel support and the Repsol-BSC Research Center for funding. All numerical tests were performed on the MareNostrum supercomputer of the Barcelona Supercomputing Center. We also acknowledge the University of Texas at Austin’s Research Consortium on Formation Evaluation., A new generation of deep directional electromagnetic imaging tools is being adopted by the industry to enhance the efficiency of well placement, reduce drilling risk and increase production potential. Schlumberger's GeoSphere reservoir service has been reported to reveal fluid-contact details and successfully map sand bodies more than 30 m from the wellbore. In this paper we employ 3D forward simulations for modeling-based interpretation of deep directional electromagnetic responses and present the results of independent feasibility studies. Optimal configurations for several induction frequencies are determined for various application conditions. This modeling algorithm will serve as a basis for a new inversion-based interpretation workflow., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Three-Dimensional CSEM Modelling on Unstructured Tetrahedral Meshes Using Edge Finite Elements

  • Castillo Reyes, Octavio
  • de la Puente, Josep
  • Cela, Jose M.
The last decade has been a period of rapid growth for electromagnetic methods (EM) in geophysics, mostly because of their industrial adoption. In particular, the marine controlled-source electromagnetic method (CSEM) has become an important technique for reducing ambiguities in data interpretation in hydrocarbon exploration. In order to be able to predict the EM signature of a given geological structure, modelling tools provide us with synthetic results which we can then compare to real data. On the other hand and among the modelling methods for EM based upon 3D unstructured meshes, the Nédélec Edge Finite Element Method (EFEM) offers a good trade-off between accuracy and number of degrees of freedom, i.e. size of the problem. Furthermore, its divergence-free basis is very well suited for solving Maxwell’s equation. On top of that, we present the numerical formulation and results of 3D CSEM modelling using the Parallel Edge-based Tool for Geophysical Electromagnetic Modelling (PETGEM) on unstructured tetrahedral meshes. We validated our experiments against quasi-analytical results in canonical models., Authors of this work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie-Sklodowska Curie grant agreement No. 644202. The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No. 689772. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACyT). Numerical tests in this work were performed on the MareNostrum supercomputer of the Barcelona Supercomputing Center - Centro Nacional de Supercomputación (www.bsc.es)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Assessment of edge-based finite element technique for geophysical electromagnetic problems: efficiency, accuracy and reliability

  • Castillo Reyes, Octavio
  • de la Puente, Josep
  • Puzyrev, Vladimir
  • Cela, José M.
In Finite Element Methods for solving electromagnetic field problems, the use of Edge Elements has become very popular. In fact, Edge Elements are often said to be a cure to many difficulties that are encountered (particularly eliminating spurious solutions) and are claimed to yield accurate results [9, 16, 17]. We will shortly describe the mathematical formulation of linear edge elements and we go through the particular issues related to the implementation of these elements in order to solve geophysical electromagnetic problems. In particular, we describe a simple, flexible and parallel Fortran 90 implementation for Edge Elements. The code is based on an abstract data structure, which allows to use different kinds of solvers with little effort. The result is an implementation that allows users to specify Edge-based Finite Element variational forms of H(curl). Finally, we also show the performance of the code in terms of efficiency, accuracy and reliability, which will shape our future line of work in order to solve more complex problems., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

3D Elastic Full Waveform Inversion - On Land Study case

  • Kormann, Jean
  • Marti, David
  • Rodríguez, Juan E.
  • Marzan, Ignacio
  • Gutiérrez, Natalia
  • Ferrer, Miguel
  • Hanzich, Mauricio
  • de la Puente, Josep
  • Carbonell, Ramon
  • Cela, Jose M.
  • Fernández, S.
Full Waveform Inversion is one of the most advanced processing methods that is recently reaching a mature state after years of solving theoretical and technical issues such as the non-uniqueness of the solution and harnessing the huge computational power required by realistic scenarios. In this work, we present the application of this method to a 3D on-land dataset acquired to characterize the shallow subsurface. The current study explores the possibility to apply elastic isotropic Full Waveform Inversion using only the vertical component of the recorded seismograms. One of the main challenges in this case study remains the costly 3D modeling that includes topography and free surface effects. Nevertheless, the resulting models provide a higher resolution of the subsurface structures than starting models, and show a good correlation with the available borehole measurements., The authors thank Repsol for the permission to publish the present research and for funding through the Aurora project. J. Kormann also thankfully acknowledges the Spanish Supercomputing Network (RES) through grant FI-2014-2-0009. Funding support for the data acquisition and access to the available geophysical data was provided by ENRESA. The GFZ Instrument Pool provided the instrumentation for the data acquisition. This project was partially funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 644602., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Mimetic Operators for Seismic Exploration

  • de la Puente, Josep
  • Rojas, Otilio
  • Ferrer, Miguel
  • Kormann, Jean
Mimetic operators are a kind of discrete operators which, on staggered grids, can accomplish "mimetic" properties analogous to their continuous counterparts. Furthermore, they can attain identical convergence order everywhere in the domain, including at or near the domain's boundaries in non-periodic problems. This property makes mimetic finite difference (MFD) operators attractive whenever high-contrast interfaces or physical boundary conditions are present in our models. In the seismic case, the strongest boundary condition is the interface between Earth and air, the so-called free surface. This surface is typically represented as a traction-free boundary condition and, although it is of critical importance for achieving accurate results, due to its vicinity to the sources and receivers, it is still a problem for current FD implementations. Despite efforts in the past, few FD schemes have attained convergence of order beyond two in results involving the free surface. Here we summarize the properties of mimetic operators applied to the elastic wave equation, as well as the changes required in order to incorporate into current explicit staggered grid codes the mimetic approach of the free-surface condition., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 644602. The research leading to these results has received funding from the European Union’s Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No 689772., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Parallel and numerical issues of the edge finite element method for 3D controlled-source electromagnetic surveys

  • Castillo Reyes, Octavio
  • de la Puente Álvarez, Josep
  • Puzyrev, Vladimir
  • Cela Espín, José M.
This paper deals with the most relevant parallel and numerical issues that arise when applying the Edge Element Method in the solution of electromagnetic problems in exploration geophysics. In this sense, in recent years the application of land and marine controlled-source electromagnetic (CSEM) surveys has gained tremendous interest among the offshore exploration community. This method is especially significant in detecting hydrocarbon in shallow/deep waters. On the other hand, in Finite Element Methods for solving electromagnetic field problems, the use of Edge Elements has become very popular. In fact, Edge Elements are often said to be a cure to many difficulties that are encountered (particularly eliminating spurious solutions) and are claimed to yield accurate results. CSEM, linear vectorial edge basis functions and its implementation on unstructured tetrahedral meshes are discussed. The use of it’s kind of discretisation enables the representation of complex geological structures and allows local refinement in order to improve the solution’s accuracy. A parallel shared memory approach is proposed to meet the high computational cost of EM modeling. Performance results and an convergence study are presented in order to validate our numerical method., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 644202. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACYT)., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 644202. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACYT)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Improving edge finite element assembly for geophysical electromagnetic modelling on shared-memory architectures

  • Castillo Reyes, Octavio
  • de la Puente, Josep
  • Cela, Jose M.
This work presents a set of node-level optimizations to perform the assembly of edge finite element matrices that arise in 3D geophysical electromagnetic modelling on shared-memory architectures. Firstly, we describe the traditional and sequential assembly approach. Secondly, we depict our vectorized and shared-memory strategy which does not require any low level instructions because it is based on an interpreted programming language, namely, Python. As a result, we obtained a simple parallel-vectorized algorithm whose runtime performance is considerably better than sequential version. The set of optimizations have been included to the work-flow of the Parallel Edge-based Tool for Geophysical Electromagnetic Modelling (PETGEM) which is developed as open-source at the Barcelona Supercomputing Center. Finally, we present numerical results for a set of tests in order to illustrate the performance of our strategy., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 644202. The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No. 689772. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACYT). All numerical tests were performed on the MareNostrum supercomputer of the Barcelona Supercomputing Center - Centro Nacional de Supercomputación (www.bsc.es)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Edge-based electric field formulation in 3D CSEM simulations: A parallel approach

  • Castillo Reyes, Octavio
  • de la Puente Álvarez, Josep
  • Puzyrev, Vladimir
  • Cela Espín, José M.
This paper presents a parallel computing scheme for the data computation that arise when applying one of the most popular electromagnetic methods in exploration geophysics, namely, controlled-source electromagnetic (CSEM). The computational approach is based on linear edge finite element method in 3D isotropic domains. The total electromagnetic field is decomposed into primary and secondary electromagnetic field. The primary field is calculated analytically using an horizontal layered-earth model and the secondary field is discretized by linear edge finite element method. We pre-calculated the primary field through of an embarrassingly-parallel framework in order to exploit the parallelism and the advantages of geometric flexibility. The numerical-computational formulation presented here is able to work with three different orientations for the dipole or excitation source. Our code is implemented on unstructured tetrahedral meshes because are able to represent complex geological structures and they allow local refinement in order to improve the solution’s accuracy. The code’s performance is studied through a test of scalability., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 644202. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACYT)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Edge-based parallel framework for the simulation of 3d CSEM surveys