Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Evaluating directive-based programming models on Wave Propagation Kernels

  • Rodriguez, Samuel
  • Farré, Pau|||0000-0002-5705-8620
  • Rosas, Claudia|||0000-0002-7814-0359
  • Hanzich, Mauricio
HPC systems have become mandatory to tackle the ever-increasing challenges imposed by new exploration areas around the world. The requirement for more HPC resources depends on the complexity of the area under exploration, yet the larger the HPC system, the more the energy consumption involved. Reduction of overall power consumption in HPC facilities, lead technologies vendors to introduce many-core devices and heterogeneous computing to the supercomputers, thus, forcing exploration codes to be ported to such new architectures. As the Oil & Gas industry has more than 30 years of legacy code, the effort to adapt it could be huge. To this extent, several programming models emerged, e.g. high-level directive-based programming models, such as OpenMP, OpenACC, and OmpSs rely on specifying to the compiler the parallelism directives to release users from manually decomposing and processing the parallel regions. The results show that it is possible to obtain a parallel code for current heterogeneous HPC architectures investing a few hours or days. The obtained speedup is at least an order of magnitude w.r.t. a sequential code. However, we provide parallelism inside a single computational node, and a wider study for evaluating the costs of porting and parallelizing across computational nodes is pending., Authors thank Repsol for the permission to publish the present research, carried out at the Repsol-BSC Research Center. This work has received funding from the European Union’s Horizon 2020 Programme (2014-2020) and from the Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement n.◦ 689772., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Strategies to Improve the Performance of a Geophysics Model for Different Manycore Systems

  • Serpa, Matheus S.
  • Cruz, Eduardo H.M.
  • Diener, Matthias
  • Krause, Arthur M.
  • Navaux, Philippe O.A.
  • Farrés, Albert
  • Rosas, Claudia|||0000-0002-7814-0359
  • Hanzich, Mauricio
  • Panetta, Jairo
Many software mechanisms for geophysics exploration in Oil & Gas industries are based on wave propagation simulation. To perform such simulations, state-of-art HPC architectures are employed, generating results faster and with more accuracy at each generation. The software must evolve to support the new features of each design to keep performance scaling. Furthermore, it is important to understand the impact of each change applied to the software, in order to improve the performance as most as possible. In this paper, we propose several optimization strategies for a wave propagation model for five architectures: Intel Haswell, Intel Knights Corner, Intel Knights Landing, NVIDIA Kepler and NVIDIA Maxwell. We focus on improving the cache memory usage, vectorization, and locality in the memory hierarchy. We analyze the hardware impact of the optimizations, providing insights of how each strategy can improve the performance. The results show that NVIDIA Maxwell improves over Intel Haswell, Intel Knights Corner, Intel Knights Landing and NVIDIA Kepler performance by up to 17.9x., This research received funding from the EU H2020 Programme and from MCTI/RNP-Brazil under the HPC4E project, grant n.o 689772. It was also supported by Intel under the Modern Code Project, and Petrobras., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Edge-based parallel framework for the simulation of 3d CSEM surveys

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Leveraging Cloud Heterogeneity for Cost-Efficient Execution of Parallel Applications

  • Roloff, Eduardo
  • Diener, Matthias
  • Diaz Carreño, Emmanuell
  • Gaspary, Luciano Paschoal
  • Navaux, Philippe O.A.
Public cloud providers offer a wide range of instance types, with different processing and interconnection speeds, as well as varying prices. Furthermore, the tasks of many parallel applications show different computational demands due to load imbalance. These differences can be exploited for improving the cost efficiency of parallel applications in many cloud environments by matching application requirements to instance types. In this paper, we introduce the concept of heterogeneous cloud systems consisting of different instance types to leverage the different computational demands of large parallel applications for improved cost efficiency. We present a mechanism that automatically suggests a suitable combination of instances based on a characterization of the application and the instance types. With such a heterogeneous cloud, we are able to improve cost efficiency significantly for a variety of MPI-based applications, while maintaining a similar performance., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Three-Dimensional CSEM Modelling on Unstructured Tetrahedral Meshes Using Edge Finite Elements

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • de la Puente, Josep
  • Cela, Jose M.
The last decade has been a period of rapid growth for electromagnetic methods (EM) in geophysics, mostly because of their industrial adoption. In particular, the marine controlled-source electromagnetic method (CSEM) has become an important technique for reducing ambiguities in data interpretation in hydrocarbon exploration. In order to be able to predict the EM signature of a given geological structure, modelling tools provide us with synthetic results which we can then compare to real data. On the other hand and among the modelling methods for EM based upon 3D unstructured meshes, the Nédélec Edge Finite Element Method (EFEM) offers a good trade-off between accuracy and number of degrees of freedom, i.e. size of the problem. Furthermore, its divergence-free basis is very well suited for solving Maxwell’s equation. On top of that, we present the numerical formulation and results of 3D CSEM modelling using the Parallel Edge-based Tool for Geophysical Electromagnetic Modelling (PETGEM) on unstructured tetrahedral meshes. We validated our experiments against quasi-analytical results in canonical models., Authors of this work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie-Sklodowska Curie grant agreement No. 644202. The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No. 689772. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACyT). Numerical tests in this work were performed on the MareNostrum supercomputer of the Barcelona Supercomputing Center - Centro Nacional de Supercomputación (www.bsc.es)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Applying future Exascale HPC methodologies in the energy sector

  • Camata, José J.
  • Cela, José M.
  • Costa, Danilo
  • Coutinho, Alvaro LGA
  • Fernández-Galisteo, Daniel
  • Jiménez, Carmen
  • Kourdioumov, Vadim
  • Mattoso, Marta
  • Mayo-García, Rafael
  • Miras, Thomas
  • Moríñigo, José A.
  • Navarro, Jose
  • Oliveira, Daniel de
  • Rodríguez-Pascual, Manuel
  • Silva, Vítor
  • Souza, Renan
  • Valduriez, Patrick
The appliance of new exascale HPC techniques to energy industry simulations is absolutely needed nowadays. In this sense, the common procedure is to customize these techniques to the specific energy sector they are of interest in order to go beyond the state-of-the-art in the required HPC exascale simulations. With this aim, the HPC4E project is developing new exascale methodologies to three different energy sources that are the present and the future of energy: wind energy production and design, efficient combustion systems for biomass-derived fuels (biogas), and exploration geophysics for hydrocarbon reservoirs. In this work, the general exascale advances proposed as part of HPC4E and its outcome to specific results in different domains are presented., The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) under the HPC4E Project (www.hpc4e.eu), grant agreement n° 689772, the Spanish Ministry of Economy and Competitiveness under the CODEC2 project (TIN2015-63562-R), and from the Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP). Computer time on Endeavour cluster is provided by the Intel Corporation, which enabled us to obtain the presented experimental results in uncertainty quantification in seismic imaging.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Optimizing Fully Anisotropic Elastic Propagation on 2nd Generation Intel Xeon Phi Processors

  • Farres, Albert
  • Duran, A.
  • Rosas, Claudia|||0000-0002-7814-0359
  • Hanzich, Mauricio
  • Yount, C.
  • Fernandez, S.
This work shows several optimization strategies evaluated and applied to an elastic wave propagation engine, based on a Fully Staggered Grid, running on the latest Intel Xeon Phi processors, the second generation of the product (code-named Knights Landing). Our fully optimized code shows a speed-up of about 4x when compared with the same algorithm optimized for the previous generation processor., Authors also thank Repsol for the permission to publish the present research, carried out at the Repsol-BSC Research Center. This work has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from the Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement n.◦ 689772. * Other brands and names are the property of their respective owners., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Improving edge finite element assembly for geophysical electromagnetic modelling on shared-memory architectures

  • Castillo Reyes, Octavio|||0000-0003-4271-5015
  • de la Puente, Josep
  • Cela, Jose M.
This work presents a set of node-level optimizations to perform the assembly of edge finite element matrices that arise in 3D geophysical electromagnetic modelling on shared-memory architectures. Firstly, we describe the traditional and sequential assembly approach. Secondly, we depict our vectorized and shared-memory strategy which does not require any low level instructions because it is based on an interpreted programming language, namely, Python. As a result, we obtained a simple parallel-vectorized algorithm whose runtime performance is considerably better than sequential version. The set of optimizations have been included to the work-flow of the Parallel Edge-based Tool for Geophysical Electromagnetic Modelling (PETGEM) which is developed as open-source at the Barcelona Supercomputing Center. Finally, we present numerical results for a set of tests in order to illustrate the performance of our strategy., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 644202. The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No. 689772. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACYT). All numerical tests were performed on the MareNostrum supercomputer of the Barcelona Supercomputing Center - Centro Nacional de Supercomputación (www.bsc.es)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Enhancing Energy Production with Exascale HPC Methods

  • Camata, José J.
  • Cela, José M.
  • Costa, Danilo
  • Coutinho, Alvaro LGA
  • Fernández-Galisteo, Daniel
  • Jiménez, Carmen
  • Kourdioumov, Vadim
  • Mattoso, Marta
  • Mayo-García, Rafael
  • Miras, Thomas
  • Moríñigo, José A.
  • Navarro, Jorge
  • Navaux, Philippe O.A.
  • Oliveira, Daniel de
  • Rodríguez-Pascual, Manuel
  • Silva, Vítor
  • Souza, Renan
  • Valduriez, Patrick
High Performance Computing (HPC) resources have become the key actor for achieving more ambitious challenges in many disciplines. In this step beyond, an explosion on the available parallelism and the use of special purpose processors are crucial. With such a goal, the HPC4E project applies new exascale HPC techniques to energy industry simulations, customizing them if necessary, and going beyond the state-of-the-art in the required HPC exascale simulations for different energy sources. In this paper, a general overview of these methods is presented as well as some specific preliminary results., The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) under the HPC4E Project (www.hpc4e.eu), grant agreement n° 689772, the Spanish Ministry of Economy and Competitiveness under the CODEC2 project (TIN2015-63562-R), and from the Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP). Computer time on Endeavour cluster is provided by the Intel Corporation, which enabled us to obtain the presented experimental results in uncertainty quantification in seismic imaging
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Radiation-Induced Error Criticality in Modern HPC Parallel Accelerators

  • Oliveira, Daniel
  • Pilla, Laercio
  • Hanzich, Mauricio
  • Fratin, Vinicius
  • Fernandes, Fernando
  • Lunardi, Caio
  • Cela, Jose M.
  • Navaux, Philippe
  • Carro, Luigi
  • Rech, Paolo
In this paper, we evaluate the error criticality of radiation-induced errors on modern High-Performance Computing (HPC) accelerators (Intel Xeon Phi and NVIDIA K40) through a dedicated set of metrics. We show that, as long as imprecise computing is concerned, the simple mismatch detection is not sufficient to evaluate and compare the radiation sensitivity of HPC devices and algorithms. Our analysis quantifies and qualifies radiation effects on applications’ output correlating the number of corrupted elements with their spatial locality. Also, we provide the mean relative error (dataset-wise) to evaluate radiation-induced error magnitude. We apply the selected metrics to experimental results obtained in various radiation test campaigns for a total of more than 400 hours of beam time per device. The amount of data we gathered allows us to evaluate the error criticality of a representative set of algorithms from HPC suites. Additionally, based on the characteristics of the tested algorithms, we draw generic reliability conclusions for broader classes of codes. We show that arithmetic operations are less critical for the K40, while Xeon Phi is more reliable when executing particles interactions solved through Finite Difference Methods. Finally, iterative stencil operations seem the most reliable on both architectures., This work was supported by the STIC-AmSud/CAPES scientific cooperation program under the EnergySFE research project grant 99999.007556/2015-02, EU H2020 Programme, and MCTI/RNP-Brazil under the HPC4E Project, grant agreement n° 689772. Tested K40 boards were donated thanks to Steve Keckler, Timothy Tsai, and Siva Hari from NVIDIA.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Study of the Wall Thermal Condition Effect in a Lean-Premixed Downscaled Can Combustor Using Large-Eddy Simulation

  • Mira Martínez, Daniel
  • Vázquez, Mariano|||0000-0002-2526-6708
  • Houzeaux, Guillaume|||0000-0002-2592-1426
  • Gövert, Simon
  • Kok, Jim W.B.
  • Mahiques, E.I.
  • Panek, Lukasz
The primary purpose of this study is to evaluate the ability of LES, with a turbulent combustion model based on steady flamelets, to predict the flame stabilization mechanisms in an industrial can combustor at full load conditions. The test case corresponds to the downscaled Siemens can combustor tested in the high pressure rig at the DLR. The effects of the wall temperature on the prediction capabilities of the codes is investigated by imposing several heat transfer conditions at the pilot and chamber walls. The codes used for this work are Alya and OpenFOAM, which are well established CFD codes in the fluid mechanics community. Prior to the simulation, results for 1-D laminar flames at the operating conditions of the combustor are compared with the detailed solutions. Subsequently, results from both codes at the mid-plane are compared against the experimental data available. Acceptable results are obtained for the axial velocity, while discrepancies are more evident for the mixture fraction and the temperature, particularly with Alya. However, both codes showed that the heat losses influence the size and length of the pilot and main flame., The research leading to these results has received funding through the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme (FP7, 2007-2013) under the grant agreement No. FP7-290042 for the project COPA-GT and the European Union’s Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project, grant agreement No. 689772. The authors thankfully acknowledge the computer resources, technical expertise and assistance provided by the Red Española de Supercomputación (RES)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Mimetic Operators for Seismic Exploration

  • de la Puente, Josep
  • Rojas, Otilio
  • Ferrer, Miguel
  • Kormann, Jean
Mimetic operators are a kind of discrete operators which, on staggered grids, can accomplish "mimetic" properties analogous to their continuous counterparts. Furthermore, they can attain identical convergence order everywhere in the domain, including at or near the domain's boundaries in non-periodic problems. This property makes mimetic finite difference (MFD) operators attractive whenever high-contrast interfaces or physical boundary conditions are present in our models. In the seismic case, the strongest boundary condition is the interface between Earth and air, the so-called free surface. This surface is typically represented as a traction-free boundary condition and, although it is of critical importance for achieving accurate results, due to its vicinity to the sources and receivers, it is still a problem for current FD implementations. Despite efforts in the past, few FD schemes have attained convergence of order beyond two in results involving the free surface. Here we summarize the properties of mimetic operators applied to the elastic wave equation, as well as the changes required in order to incorporate into current explicit staggered grid codes the mimetic approach of the free-surface condition., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 644602. The research leading to these results has received funding from the European Union’s Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No 689772., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Fostering Collaboration in Energy Research and Technological Developments applying new exascale HPC techniques

  • Cela, Jose M.
  • Coutinho, Alvaro L.G.A.
  • Navaux, Philippe O.A.
  • Mayo-García, Rafael
During the last years, High Performance Computing (HPC) resources have undergone a dramatic transformation, with an explosion on the available parallelism and the use of special purpose processors. There are international initiatives focusing on redesigning hardware and software in order to achieve the Exaflop capability. With this aim, the HPC4E project is applying the new exascale HPC techniques to energy industry simulations, customizing them if necessary, and going beyond the state-of-the-art in the required HPC exascale simulations for different energy sources that are the present and the future of energy: wind energy production and design, efficient combustion systems for biomass-derived fuels (biogas), and exploration geophysics for hydrocarbon reservoirs. HPC4E joins efforts of several institutions settled in Brazil and Europe., The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement n° 689772.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Performance Evaluation of Multiple Cloud Data Centers Allocations for HPC

  • Roloff, Eduardo
  • Carreño, Emmanuell D.
  • Valverde-Sanchez, Jimmy K.M.
  • Diener, Matthias
  • Serpa, Matheus da Silva
  • Houzeaux, Guillaume|||0000-0002-2592-1426
  • Schnorr, Lucas M.
  • Maillard, Nicolas
  • Gaspary, Luciano P.
  • Navaux, Philippe
This paper evaluates the behavior of the Microsoft Azure G5 cloud instance type over multiple Data Centers. The purpose is to identify if there are major differences between them and to help the users choose the best option for their needs. Our results show that there are differences in the network level for the same instance type in different locations and inside the same location at different times. The network performance causes interference in the applications level, as we could verify in our results., This research received funding from the EU H2020 Programme and from MCTI/RNP-Brazil under the HPC4E project, grant agreement no. 689772. Experiments presented in this paper were carried out using the Grid'5000 testbed, supported by a scientific interest group hosted by Inria and including CNRS, RENATER and several Universities as well as other organizations (see https://www.grid5000.fr). Additional funding was provided by CAPES and Microsoft., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Optimizing Fully Anisotropic Elastic Propagation on 2nd Generation Intel Xeon Phi Processors

  • Farres, Albert
  • Duran, A.
  • Rosas, Claudia
  • Hanzich, Mauricio
  • Yount, C.
  • Fernandez, S.
This work shows several optimization strategies evaluated and applied to an elastic wave propagation engine, based on a Fully Staggered Grid, running on the latest Intel Xeon Phi processors, the second generation of the product (code-named Knights Landing). Our fully optimized code shows a speed-up of about 4x when compared with the same algorithm optimized for the previous generation processor., Authors also thank Repsol for the permission to publish the present research, carried out at the Repsol-BSC Research Center. This work has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from the Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement n.◦ 689772. * Other brands and names are the property of their respective owners., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Study of the Wall Thermal Condition Effect in a Lean-Premixed Downscaled Can Combustor Using Large-Eddy Simulation

  • Mira Martínez, Daniel
  • Vázquez, Mariano
  • Houzeaux, Guillaume
  • Gövert, Simon
  • Kok, Jim W.B.
  • Mahiques, E.I.
  • Panek, Lukasz
The primary purpose of this study is to evaluate the ability of LES, with a turbulent combustion model based on steady flamelets, to predict the flame stabilization mechanisms in an industrial can combustor at full load conditions. The test case corresponds to the downscaled Siemens can combustor tested in the high pressure rig at the DLR. The effects of the wall temperature on the prediction capabilities of the codes is investigated by imposing several heat transfer conditions at the pilot and chamber walls. The codes used for this work are Alya and OpenFOAM, which are well established CFD codes in the fluid mechanics community. Prior to the simulation, results for 1-D laminar flames at the operating conditions of the combustor are compared with the detailed solutions. Subsequently, results from both codes at the mid-plane are compared against the experimental data available. Acceptable results are obtained for the axial velocity, while discrepancies are more evident for the mixture fraction and the temperature, particularly with Alya. However, both codes showed that the heat losses influence the size and length of the pilot and main flame., The research leading to these results has received funding through the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme (FP7, 2007-2013) under the grant agreement No. FP7-290042 for the project COPA-GT and the European Union’s Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project, grant agreement No. 689772. The authors thankfully acknowledge the computer resources, technical expertise and assistance provided by the Red Española de Supercomputación (RES)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Three-Dimensional CSEM Modelling on Unstructured Tetrahedral Meshes Using Edge Finite Elements

  • Castillo Reyes, Octavio
  • de la Puente, Josep
  • Cela, Jose M.
The last decade has been a period of rapid growth for electromagnetic methods (EM) in geophysics, mostly because of their industrial adoption. In particular, the marine controlled-source electromagnetic method (CSEM) has become an important technique for reducing ambiguities in data interpretation in hydrocarbon exploration. In order to be able to predict the EM signature of a given geological structure, modelling tools provide us with synthetic results which we can then compare to real data. On the other hand and among the modelling methods for EM based upon 3D unstructured meshes, the Nédélec Edge Finite Element Method (EFEM) offers a good trade-off between accuracy and number of degrees of freedom, i.e. size of the problem. Furthermore, its divergence-free basis is very well suited for solving Maxwell’s equation. On top of that, we present the numerical formulation and results of 3D CSEM modelling using the Parallel Edge-based Tool for Geophysical Electromagnetic Modelling (PETGEM) on unstructured tetrahedral meshes. We validated our experiments against quasi-analytical results in canonical models., Authors of this work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie-Sklodowska Curie grant agreement No. 644202. The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No. 689772. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACyT). Numerical tests in this work were performed on the MareNostrum supercomputer of the Barcelona Supercomputing Center - Centro Nacional de Supercomputación (www.bsc.es)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Enhancing Energy Production with Exascale HPC Methods

  • Camata, José J.
  • Cela, José M.
  • Costa, Danilo
  • Coutinho, Alvaro LGA
  • Fernández-Galisteo, Daniel
  • Jiménez, Carmen
  • Kourdioumov, Vadim
  • Mattoso, Marta
  • Mayo-García, Rafael
  • Miras, Thomas
  • Moríñigo, José A.
  • Navarro, Jorge
  • Navaux, Philippe O.A.
  • Oliveira, Daniel de
  • Rodríguez-Pascual, Manuel
  • Silva, Vítor
  • Souza, Renan
  • Valduriez, Patrick
High Performance Computing (HPC) resources have become the key actor for achieving more ambitious challenges in many disciplines. In this step beyond, an explosion on the available parallelism and the use of special purpose processors are crucial. With such a goal, the HPC4E project applies new exascale HPC techniques to energy industry simulations, customizing them if necessary, and going beyond the state-of-the-art in the required HPC exascale simulations for different energy sources. In this paper, a general overview of these methods is presented as well as some specific preliminary results., The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) under the HPC4E Project (www.hpc4e.eu), grant agreement n° 689772, the Spanish Ministry of Economy and Competitiveness under the CODEC2 project (TIN2015-63562-R), and from the Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP). Computer time on Endeavour cluster is provided by the Intel Corporation, which enabled us to obtain the presented experimental results in uncertainty quantification in seismic imaging, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Fostering Collaboration in Energy Research and Technological Developments applying new exascale HPC techniques

  • Cela, Jose M.
  • Coutinho, Alvaro L.G.A.
  • Navaux, Philippe O.A.
  • Mayo-García, Rafael
During the last years, High Performance Computing (HPC) resources have undergone a dramatic transformation, with an explosion on the available parallelism and the use of special purpose processors. There are international initiatives focusing on redesigning hardware and software in order to achieve the Exaflop capability. With this aim, the HPC4E project is applying the new exascale HPC techniques to energy industry simulations, customizing them if necessary, and going beyond the state-of-the-art in the required HPC exascale simulations for different energy sources that are the present and the future of energy: wind energy production and design, efficient combustion systems for biomass-derived fuels (biogas), and exploration geophysics for hydrocarbon reservoirs. HPC4E joins efforts of several institutions settled in Brazil and Europe., The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement n° 689772., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Leveraging Cloud Heterogeneity for Cost-Efficient Execution of Parallel Applications

  • Roloff, Eduardo
  • Diener, Matthias
  • Diaz Carreño, Emmanuell
  • Gaspary, Luciano Paschoal
  • Navaux, Philippe O.A.
Public cloud providers offer a wide range of instance types, with different processing and interconnection speeds, as well as varying prices. Furthermore, the tasks of many parallel applications show different computational demands due to load imbalance. These differences can be exploited for improving the cost efficiency of parallel applications in many cloud environments by matching application requirements to instance types. In this paper, we introduce the concept of heterogeneous cloud systems consisting of different instance types to leverage the different computational demands of large parallel applications for improved cost efficiency. We present a mechanism that automatically suggests a suitable combination of instances based on a characterization of the application and the instance types. With such a heterogeneous cloud, we are able to improve cost efficiency significantly for a variety of MPI-based applications, while maintaining a similar performance., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Mimetic Operators for Seismic Exploration

  • de la Puente, Josep
  • Rojas, Otilio
  • Ferrer, Miguel
  • Kormann, Jean
Mimetic operators are a kind of discrete operators which, on staggered grids, can accomplish "mimetic" properties analogous to their continuous counterparts. Furthermore, they can attain identical convergence order everywhere in the domain, including at or near the domain's boundaries in non-periodic problems. This property makes mimetic finite difference (MFD) operators attractive whenever high-contrast interfaces or physical boundary conditions are present in our models. In the seismic case, the strongest boundary condition is the interface between Earth and air, the so-called free surface. This surface is typically represented as a traction-free boundary condition and, although it is of critical importance for achieving accurate results, due to its vicinity to the sources and receivers, it is still a problem for current FD implementations. Despite efforts in the past, few FD schemes have attained convergence of order beyond two in results involving the free surface. Here we summarize the properties of mimetic operators applied to the elastic wave equation, as well as the changes required in order to incorporate into current explicit staggered grid codes the mimetic approach of the free-surface condition., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 644602. The research leading to these results has received funding from the European Union’s Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No 689772., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Evaluating directive-based programming models on Wave Propagation Kernels

  • Rodriguez, Samuel
  • Farré, Pau
  • Rosas, Claudia
  • Hanzich, Mauricio
HPC systems have become mandatory to tackle the ever-increasing challenges imposed by new exploration areas around the world. The requirement for more HPC resources depends on the complexity of the area under exploration, yet the larger the HPC system, the more the energy consumption involved. Reduction of overall power consumption in HPC facilities, lead technologies vendors to introduce many-core devices and heterogeneous computing to the supercomputers, thus, forcing exploration codes to be ported to such new architectures. As the Oil & Gas industry has more than 30 years of legacy code, the effort to adapt it could be huge. To this extent, several programming models emerged, e.g. high-level directive-based programming models, such as OpenMP, OpenACC, and OmpSs rely on specifying to the compiler the parallelism directives to release users from manually decomposing and processing the parallel regions. The results show that it is possible to obtain a parallel code for current heterogeneous HPC architectures investing a few hours or days. The obtained speedup is at least an order of magnitude w.r.t. a sequential code. However, we provide parallelism inside a single computational node, and a wider study for evaluating the costs of porting and parallelizing across computational nodes is pending., Authors thank Repsol for the permission to publish the present research, carried out at the Repsol-BSC Research Center. This work has received funding from the European Union’s Horizon 2020 Programme (2014-2020) and from the Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement n.◦ 689772., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Performance Evaluation of Multiple Cloud Data Centers Allocations for HPC

  • Roloff, Eduardo
  • Carreño, Emmanuell D.
  • Valverde-Sanchez, Jimmy K.M.
  • Diener, Matthias
  • Serpa, Matheus da Silva
  • Houzeaux, Guillaume
  • Schnorr, Lucas M.
  • Maillard, Nicolas
  • Gaspary, Luciano P.
  • Navaux, Philippe
This paper evaluates the behavior of the Microsoft Azure G5 cloud instance type over multiple Data Centers. The purpose is to identify if there are major differences between them and to help the users choose the best option for their needs. Our results show that there are differences in the network level for the same instance type in different locations and inside the same location at different times. The network performance causes interference in the applications level, as we could verify in our results., This research received funding from the EU H2020 Programme and from MCTI/RNP-Brazil under the HPC4E project, grant agreement no. 689772. Experiments presented in this paper were carried out using the Grid'5000 testbed, supported by a scientific interest group hosted by Inria and including CNRS, RENATER and several Universities as well as other organizations (see https://www.grid5000.fr). Additional funding was provided by CAPES and Microsoft., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Applying future Exascale HPC methodologies in the energy sector

  • Camata, José J.
  • Cela, José M.
  • Costa, Danilo
  • Coutinho, Alvaro LGA
  • Fernández-Galisteo, Daniel
  • Jiménez, Carmen
  • Kourdioumov, Vadim
  • Mattoso, Marta
  • Mayo-García, Rafael
  • Miras, Thomas
  • Moríñigo, José A.
  • Navarro, Jose
  • Oliveira, Daniel de
  • Rodríguez-Pascual, Manuel
  • Silva, Vítor
  • Souza, Renan
  • Valduriez, Patrick
The appliance of new exascale HPC techniques to energy industry simulations is absolutely needed nowadays. In this sense, the common procedure is to customize these techniques to the specific energy sector they are of interest in order to go beyond the state-of-the-art in the required HPC exascale simulations. With this aim, the HPC4E project is developing new exascale methodologies to three different energy sources that are the present and the future of energy: wind energy production and design, efficient combustion systems for biomass-derived fuels (biogas), and exploration geophysics for hydrocarbon reservoirs. In this work, the general exascale advances proposed as part of HPC4E and its outcome to specific results in different domains are presented., The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) under the HPC4E Project (www.hpc4e.eu), grant agreement n° 689772, the Spanish Ministry of Economy and Competitiveness under the CODEC2 project (TIN2015-63562-R), and from the Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP). Computer time on Endeavour cluster is provided by the Intel Corporation, which enabled us to obtain the presented experimental results in uncertainty quantification in seismic imaging., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Radiation-Induced Error Criticality in Modern HPC Parallel Accelerators

  • Oliveira, Daniel
  • Pilla, Laercio
  • Hanzich, Mauricio
  • Fratin, Vinicius
  • Fernandes, Fernando
  • Lunardi, Caio
  • Cela, Jose M.
  • Navaux, Philippe
  • Carro, Luigi
  • Rech, Paolo
In this paper, we evaluate the error criticality of radiation-induced errors on modern High-Performance Computing (HPC) accelerators (Intel Xeon Phi and NVIDIA K40) through a dedicated set of metrics. We show that, as long as imprecise computing is concerned, the simple mismatch detection is not sufficient to evaluate and compare the radiation sensitivity of HPC devices and algorithms. Our analysis quantifies and qualifies radiation effects on applications’ output correlating the number of corrupted elements with their spatial locality. Also, we provide the mean relative error (dataset-wise) to evaluate radiation-induced error magnitude. We apply the selected metrics to experimental results obtained in various radiation test campaigns for a total of more than 400 hours of beam time per device. The amount of data we gathered allows us to evaluate the error criticality of a representative set of algorithms from HPC suites. Additionally, based on the characteristics of the tested algorithms, we draw generic reliability conclusions for broader classes of codes. We show that arithmetic operations are less critical for the K40, while Xeon Phi is more reliable when executing particles interactions solved through Finite Difference Methods. Finally, iterative stencil operations seem the most reliable on both architectures., This work was supported by the STIC-AmSud/CAPES scientific cooperation program under the EnergySFE research project grant 99999.007556/2015-02, EU H2020 Programme, and MCTI/RNP-Brazil under the HPC4E Project, grant agreement n° 689772. Tested K40 boards were donated thanks to Steve Keckler, Timothy Tsai, and Siva Hari from NVIDIA., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Strategies to Improve the Performance of a Geophysics Model for Different Manycore Systems

  • Serpa, Matheus S.
  • Cruz, Eduardo H.M.
  • Diener, Matthias
  • Krause, Arthur M.
  • Navaux, Philippe O.A.
  • Farrés, Albert
  • Rosas, Claudia
  • Hanzich, Mauricio
  • Panetta, Jairo
Many software mechanisms for geophysics exploration in Oil & Gas industries are based on wave propagation simulation. To perform such simulations, state-of-art HPC architectures are employed, generating results faster and with more accuracy at each generation. The software must evolve to support the new features of each design to keep performance scaling. Furthermore, it is important to understand the impact of each change applied to the software, in order to improve the performance as most as possible. In this paper, we propose several optimization strategies for a wave propagation model for five architectures: Intel Haswell, Intel Knights Corner, Intel Knights Landing, NVIDIA Kepler and NVIDIA Maxwell. We focus on improving the cache memory usage, vectorization, and locality in the memory hierarchy. We analyze the hardware impact of the optimizations, providing insights of how each strategy can improve the performance. The results show that NVIDIA Maxwell improves over Intel Haswell, Intel Knights Corner, Intel Knights Landing and NVIDIA Kepler performance by up to 17.9x., This research received funding from the EU H2020 Programme and from MCTI/RNP-Brazil under the HPC4E project, grant n.o 689772. It was also supported by Intel under the Modern Code Project, and Petrobras., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Improving edge finite element assembly for geophysical electromagnetic modelling on shared-memory architectures

  • Castillo Reyes, Octavio
  • de la Puente, Josep
  • Cela, Jose M.
This work presents a set of node-level optimizations to perform the assembly of edge finite element matrices that arise in 3D geophysical electromagnetic modelling on shared-memory architectures. Firstly, we describe the traditional and sequential assembly approach. Secondly, we depict our vectorized and shared-memory strategy which does not require any low level instructions because it is based on an interpreted programming language, namely, Python. As a result, we obtained a simple parallel-vectorized algorithm whose runtime performance is considerably better than sequential version. The set of optimizations have been included to the work-flow of the Parallel Edge-based Tool for Geophysical Electromagnetic Modelling (PETGEM) which is developed as open-source at the Barcelona Supercomputing Center. Finally, we present numerical results for a set of tests in order to illustrate the performance of our strategy., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 644202. The research leading to these results has received funding from the European Union's Horizon 2020 Programme (2014-2020) and from Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (www.hpc4e.eu), grant agreement No. 689772. Authors gratefully acknowledge the support from the Mexican National Council for Science and Technology (CONACYT). All numerical tests were performed on the MareNostrum supercomputer of the Barcelona Supercomputing Center - Centro Nacional de Supercomputación (www.bsc.es)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Edge-based parallel framework for the simulation of 3d CSEM surveys