Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Lateral growth of the fault damage zone as a result of induced seismicity

  • Vilarrasa, Víctor
  • Makhnenko, Roman Y.
  • Parisio, Francesco
Geo-energy applications such as geologic carbon storage, geothermal energy extraction, and subsurface energy storage, imply fluid injection and production resulting in pressure and temperature diffusion. Consequent changes in the initial hydraulic and thermal state may induce seismicity, usually nucleated at faults that cross the injection formation. Through fully coupled hydro-mechanical simulations, we investigate the fault stability affected by fluid injection into a porous aquifer that is overlaid and underlain by low permeable clay-rich formations. We find that aquifer pressurization as a result of fluid injection causes significant stress changes around the fault. Simulation results show that the least stable situation occurs at the contact between the aquifer and the fault damage zone – unexpectedly not within the fault. Induced earthquakes are likely to nucleate on the edge of the fault damage zone, leading to a lateral growth of the damage zone and a possible spreading of the fault zone., V.V. would like to acknowledge funding from the European Research Council (ERC) under European Union’s Horizon 2020 research and innovation programme (grant agreement No 801809), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Inhomogeneous fault stability due to fluid injection

  • Vilarrasa, Víctor
  • Parisio, Francesco
  • Makhnenko, Roman Y.
Forecasting and mitigating induced seismicity requires understanding of the underlying physical processes. Poromechanical and thermal effects on stresses and shear slip stress transfer play a non-negligible role that has challenged the classical interpretation in which induced seismicity is caused exclusively by pressure buildup (De Simone et al., 2017). In this contribution, we analyze how the stress changes induced as a result of fluid injection affect fault stability. We perform fully coupled hydro-mechanical simulations of fluid injection into a saline aquifer bounded above and below by low-permeable clay-rich rock and intersected by a low-permeable steep fault. Simulation results show that maintaining a constant injection rate leads to a progressive reservoir pressurization on the side of the fault where injection takes place (Fig. 1a). Given the low-permeability of the fault core, pressure buildup is negligible on the other side of the fault. These pore pressure changes cause strong variations in the total stresses controlled by rock stiffness around the fault. Deviatoric stress changes are controlled by stress balance from the two sides of the fault: the upper part of the reservoir, juxtaposed to the stiffer reservoir on the right, has a lower increase in the deviatoric stress than the lower part, which is juxtaposed to the more compliant caprock. This implies increased fault stability in the upper part and decreased fault stability in the lower part (Fig, 1d). As highlighted by our results, fault stability is: i) non-homogeneous within the whole fault and ii) controlled by poromechanical stress changes as much as by pressure buildup., V.V. would like to acknowledge funding from the European Research Council (ERC) under European Union’s Horizon 2020 research and innovation programme (grant agreement No 801809), and CSIC through the Intramural project 201730I100, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Modeling coupled processes in fractured media using a continuum approach

  • Vaezi, Iman
  • Vilarrasa, Víctor
Fractures control fluid flow and the coupled geomechanical response of geological media in many geo-engineering and geo-energy applications. For instance, fluid flow and deformation mainly occur along fractures in enhanced geothermal systems (EGS), underground radioactive waste repositories and CO2 storage (Rutqvist and Stephansson, 2003). Coupled thermo-hydro-mechanical (THM) processes are induced in rock masses as a result of perturbations in the pore pressure, e.g., fluid injection and production, and/or temperature, e.g., cold fluid injection and disposal of radioactive waste. One example of these coupled processes is the fracture opening as a result of pore pressure increase, which enhances fracture permeability (Tsang, 1999). The geo-engineering and geo-energy applications of interest involve large fractured rock masses that include multiple fractures. Numerically modeling of coupled hydro-mechanical (HM) processes while considering a large number of fractures is extremely challenging (Lei et al., 2017). We propose using a continuum mechanics approach to model fractures. Before studying fractured rock masses containing many fractures, we focus on a single fracture to fully understand the hydro-mechanical behavior of a fracture to a constant injection flow rate. Here, we present some preliminary results., The authors acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) (Grant agreement No. 801809)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Modeling of the CO2 long-term periodic injection experiment (CO2LPIE) into stratified hard clay rock at Mont Terri

  • Sciandra, Dario
  • Vilarrasa, Víctor
  • Kivi, Iman Rahimzadeh
  • Makhnenko, Roman Y.
  • Nussbaum, Christophe
  • Rebscher, Dorothee
CO2 Long-term Periodic Injection Experiment (CO2LPIE) aims at investigating the caprock sealing capacity in geologic carbon storage in a highly monitored environment at the field scale. The experiment is carried out in the sandy facies of Opalinus Clay at the Mont Terri rock laboratory, Switzerland, to gain knowledge on the changes in the geomechanical properties induced by the geochemical reactions resulting from CO2 injection (Rebscher et al., 2019; 2020). The presence of bedding planes in Opalinus Clay is responsible for its anisotropic hydrogeological and geomechanical behavior., D.S., V.V. and I.R.K. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) (Grant agreement No. 801809). R.M. is thankful for the support from US DOE through CarbonSAFE Macon County Project DE-FE0029381., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

CO2LPIE Project – Combining in-situ, laboratory, and modelling work to investigate periodic CO2 injection into an argillaceous claystone

  • Rebscher, Dorothee
  • Vilarrasa, Víctor
  • Makhnenko, Roman Y.
  • Nussbaum, Christophe
  • Kipfer, C.
  • Wersin, P.
In most uses of the subsurface, especially while injecting and extracting fluids into or from a high porous reservoir rock, the existence of an overlying caprock with sufficiently low permeability is crucial for the success of the aforementioned exploitations. However, while a multitude of research has been conducted already on reservoir rocks, too little attention has been given to the equally important, sealing caprocks. As of yet, detailed studies on their behaviour on different scales in time and space are rather scarce. The project CO2LPIE (CO2 Long-term Periodic Injection Experiment [Rebscher et al., 2019; Rebscher et al., 2020]) is committed to contribute to fill these knowledge gaps by combining an in-situ field test with CO2 injection on a time span of 15 years to 20 years. The approach is complemented with extensive geomechanical and geochemical tests in the laboratory as well as site-specific thermal, hydrological, mechanical, and chemical (THMC) computational modelling. These comprehensive investigations can significantly enhance the understanding, description, and prediction of the complex coupled processes in a caprock. Presently, the demand for factual issues are gaining more attention, as the interest in carbon capture, and storage (CCS) resurges, not the least because CCS is obtaining wider recognition as one of the necessary tools to mitigate climate change., V.V. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu, Grant agreement No. 801809). R.M. is thankful for the support from US DOE through CarbonSAFE Macon County Project DE-FE0029381., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Assessment of the induced seismicity potential in pressurized and depleted reservoirs: the role of fault permeability

  • Wu, Haiqing
  • Vilarrasa, Víctor
  • De Simone, Silvia
  • Saaltink, Maarten W.
  • Parisio, Francesco
Induced seismicity during reservoir pressurization or depletion has become a widespread issue (Ferronato et al., 2010; Ellsworth 2013) as a result of the proliferation of geo-energy projects (Foulger et al., 2018). Faults intersecting the injection/pumping formation undergo pore pressure and stress changes, affecting their stability. The hydraulic properties of faults (e.g., permeability) control the pore pressure change which, through poromechanical effects, increases the total stress in the rock. Faults cause additional stress change (Gheibi et al., 2017) that is further enhanced by fault offset (Buijze et al., 2017), which can increase the frequency of induced earthquakes. Thus, predicting the stress variation in presence of displaced faults is particularly relevant in order to minimize the induced seismicity risk. Analytical solutions provide accurate and fast predictions and are well suited to gain insights into the physical mechanisms. For the problem of reservoir pressurization/depletion, Eshelby’s inclusion theory (Eshelby, 1957) is at the heart of several existing analytical solutions that either assume non-displaced faults (e.g., Segall, 1992; Soltanzadeh and Hawkees, 2008; Wang et al. 2016) or displaced but permeable faults (Jansen et al., 2019). Since no solution existed for lowpermeable faults that cross the reservoir with an offset, we have developed one (Wu et al., 2020). In this paper, we analyse the difference in terms of induced seismicity potential in response to injection/pumping into a reservoir crossed by a displaced fault that could be either permeable or impermeable., H.W. would like to acknowledge the financial support received from the AGAUR (Generalitat de Catalunya) through the ‘‘grant for universities and research centers for the recruitment of new research personnel (FI-2019)’’. H.W. and V.V. acknowledge financial support from the “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project no. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) (PCI2018-093272). V.V. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme through the Starting Grant GEoREST (www.georest.eu), grant agreement No. 801809. V.V. also acknowledges support by the Spanish Ministry of Science and Innovation (Project CEX2018-000794-S). F.P. acknowledges funding from the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – project number PA 3451/1-1. S.D.S. acknowledges financial support from the SAD2018 project funded by the Brittany Region and from ANR LabCom Project eLabo ANR-17-LCV2-0012., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Laboratory and numerical assessment of potential CO2 leakage through the caprock

  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
  • Makhnenko, Roman Y.
The emission of huge amounts of anthropogenic CO2 into the atmosphere have given rise to global warming and therefore climate change. Currently, it is widely accepted that geologic storage of CO2 in deep underground formations has to be part of the solution to mitigate these harmful consequences (IPCC, 2018). The injected CO2 is a non-wetting fluid in the reservoir rock and it is also lighter than the in-situ brine, leading to upward buoyant transport of CO2 across the storage reservoir. The migration of CO2 out of the reservoir is supposed to be principally restricted by a low-permeability and high-entry pressure caprock lying immediately above it. Therefore, the successful and safe retainment of CO2 in place over geologic time scales is strongly controlled by the sealing capacity of the caprock. As CO2 gets in contact with the caprock, the concentration gradient of the dissolved CO2 into brine drives molecular diffusion of the non-wetting fluid out of the storage repository through the fluid-filled interconnected pore network of the caprock (Busch et al., 2008). On the contrary, the bulk penetration of CO2 as a free phase into the caprock encounters capillary resistance imposed by fluid-fluid and fluid-rock interfacial forces operating at tight pore throats. The injection-induced excess pressure and buoyancy forces may increase the differential pressure between CO2 and brine at the reservoir-caprock interface. If the overpressure of the non-wetting fluid exceeds the entry capillary pressure P0 acting at the largest pore throats, it starts invading the caprock. Further increase in the differential pressure overcoming another capillary threshold, termed breakthrough pressure Pbrth initiates a continuous filament of CO2 across the pore system. From this point on, the two-phase flow dominates the volumetric displacement of CO2. It is generally believed that the pressure-driven bulk flow of the non-wetting fluid mainly governs the potential leakage through the intact caprock and that molecular diffusive loss toward the surface is negligible (Song and Zhang, 2013). However, to arrive at a fundamental understanding of the CO2 transport behavior and distinguish between the prevailing leakage mechanisms, further experimental investigations under representative reservoir conditions are required. These experimental studies should be accompanied by appropriate interpretation techniques to accurately deal with the CO2-brine-rock system complexities. The main objective of this study is to combine methods from two complementary disciplines of experimental observations and numerical simulations to get a better insight into the dominant leakage mechanisms of CO2 through the caprock. Our focus is on the potential leakage through the rock matrix. Laboratory tests on an analogous caprock sample are first carried out under the in-situ conditions with the primary goal of evaluating CO2 penetration and flow properties across the caprock. Experimental results are then used to parameterize a two-phase flow model for the numerical simulation and interpretation of the core-scale CO2 breakthrough and flow behavior., I.R.K. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) (Grant agreement No. 801809). R.M. is thankful for the support from US DOE through CarbonSAFE Macon County Project DE-FE0029381., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Long-term effects of fluid injection and production on the thermo-hydro-mechanical behavior of a fractured reservoir

  • Vilarrasa, Víctor
  • Zareidarmiyan, A.
  • Makhnenko, Roman Y.
  • Parisio, Francesco
Deep geological media will be intensively utilized for achieving carbon neutrality within the next few decades (Friedmann et al., 2020). Widespread deployment of geothermal energy production, geologic carbon storage, and subsurface energy storage will require massive injection and production of fluids in porous reservoir rock and fractured low permeable formations. Fluid injection and production causes pore pressure and temperature perturbations that induce deformation and stress changes (Tsang, 1991). These pressure, temperature, and stress changes affect fracture and fault stability, leading to aseismic and/or seismic slip if failure conditions are reached (Cornet et al., 1997). Understanding how coupled processes control fluid flow and fracture stability is crucial for the success of geo-energy projects. While small shear slip, in the order of mm to cm, can be beneficial to enhance the permeability of the rock mass (Rutqvist and Stephansson, 2003), larger slip, in the order of tens of cm over rupture areas on the scale of hundred meters in diameter, may induce earthquakes that could be felt on the surface, causing nuisance to the local populations and eventually damaging structures and infrastructures (Kanamori and Brodsky, 2004). Numerical simulations of coupled processes are a useful tool to understand the interactions between pore pressure, temperatures, and stress in fractured rock as a result of fluid injection and/or extraction. In this study, we aim at identifying the long-term thermo-hydro-mechanical (THM) response of a fractured reservoir to water injection and production., V.V. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) (Grant agreement No. 801809). R.M. is thankful for the support from US DOE through CarbonSAFE Macon County Project DE-FE0029381. F.P. acknowledges funding from the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – project number PA 3451/1-1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Hydromechanical processes of supercritical CO2 intrusion into shaly caprocks

  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
  • Makhnenko, Roman Y.
It is widely accepted that massive deployment of Carbon Capture and Storage (CCS) in geologic media at the gigatonne scale should be part of the mitigating pathways toward net-zero CO2 emissions. For a successful geologic CO2 storage, the caprock sealing capacity and the associated governing processes have to be assessed in detail. In this contribution, we aim at improving our understanding of hydromechanical processes induced by dynamics of CO2 leakage through intact shaly caprocks. To this end, we perform laboratory experiments on supercritical CO2 injection into a caprock sample under representative subsurface conditions. We numerically simulate the process to provide a mechanistic interpretation of experimental observations. Overall, we find that CO2 intrusion into the pore network increases pore pressure and triggers hydromechanical coupling effects, mainly causing the specimen to expand after an initial transient compaction. The pressureinduced rock expansion slightly enhances the porosity and permeability, promoting CO2 flow close to the upstream. However, the high entry pressure and ultra-low effective permeability of the non-wetting phase limit the bulk volumetric penetration of CO2 deep into the caprock. Therefore, advective flow of CO2 is restricted to the lowermost portion of intact caprock, whereas diffusion extends along the whole caprock sample., I.R.K. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) (Grant agreement No. 801809). IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S). R.M. is thankful for the support from US DOE through CarbonSAFE Macon County Project DE-FE0029381., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Effect of caprock relative permeability on CO2 flow through it

  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
  • Makhnenko, Roman Y.
Geologic carbon storage is needed to meet the climate goal of limiting global warming to 1.5 ºC. Injecting in deep sedimentary formations brings CO2 to a supercritical state, yet less dense than the resident brine making it buoyant. Therefore, the assessment of the sealing capacity of the caprock lying above the storage reservoir is of paramount importance for the widespread deployment of geologic carbon storage. We perform laboratory-scale supercritical CO2 injection into a representative caprock sample and employ numerical simulations to provide an in-depth understanding of CO2 leakage mechanisms. We explore the effect of relative permeability curves on the potential CO2 leakage through the caprock. We show that capillary breakthrough is unlikely to take place across a non-fractured caprock with low intrinsic permeability and high entry pressure. Rather, CO2 leakage is dominated by the intrinsically slow molecular diffusion, favoring safe storage of CO2 over geological time scales., I.R.K. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu) (Grant agreement No. 801809). IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Project CEX2018-000794-S). R.M. is thankful for the support from US DOE through CarbonSAFE Macon County Project DE-FE0029381., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Coupled Thermo-Hydro-Mechanical Effects on Injection-Induced Seismicity in Fractured Reservoirs

  • Vilarrasa, Víctor
  • Zareidarmiyan, A.
  • Makhnenko, Roman Y.
  • Parisio, Francesco
With the urgent necessity of geo-energy resources to achieve carbon neutrality, fluid injection and production in the fractured media will significantly increase. Applications such as enhanced geothermal systems, geologic carbon storage, and subsurface energy storage involve pressure, temperature, and stress changes that affect fracture stability and may induce microseismicity. To eventually have the ability to control induced seismicity, it is first necessary to understand its triggering mechanisms. To this end, we perform coupled thermo-hydro-mechanical (THM) simulations of cold water injection and production into a rock containing two fracture sets perpendicular between them. The permeability of fractures being four orders of magnitude higher than the one of the rock matrix leads to preferential pressure and cooling advancement, which induce stress changes that affect fracture stability. We find that the fracture set that is oriented favorably to undergo shear slip in the considered stress regime becomes critically stressed, inducing microseismicity. In contrast, the fracture set that is not favorably oriented for shear remains stable. These results contrast with those obtained for an equivalent porous media that does not explicitly include fractures in the model, which fails to reproduce the direction-dependent stability of fractures present in the subsurface. We contend that fractures should be directly embedded in the numerical models when inhomogeneities are of the spatial scale of the reservoir to enable reproducing the THM coupled processes that may lead to induced microseismicity., V.V. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu (http://www.georest.eu)) under Grant agreement No. 801809. IDAEA-CSIC is a Centre of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation, Grant CEX2018-000794-S, funded by MCIN/AEI/ 10.13039/501100011033). R.M. is thankful for the support from US DOE through CarbonSAFE Macon County Project DE-FE0029381. F.P. acknowledges funding from the European Union’s Horizon 2020 Research and Innovation Program through the Marie Skłodowska-Curie Individual Fellowship ARMISTICE under Grant agreement No. 882733., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Coupled processes to explain induced seismicity: the case of the Underground Gas Storage of Castor, Spain

  • Vilarrasa, Víctor
  • De Simone, Silvia
  • Carrera, Jesús
  • Villaseñor, Antonio
Trabajo presentado en la 3rd International Conference on Coupled Processes in Fractured Geological Media: "Observation, Modeling, and Application" (Coufrac 2022), celebrada en Berkeley (USA) entre el 14 y el 16 de noviembre de 2022., Pressure buildup is the standard, but often insufficient, explanation for induced seismicity, , especially when it comes to delayed effects. Coupled processes may play relevant roles, so that they must be accounted for to find the mechanisms triggering induced seismicity, especially when it comes to delayed effects. We illustrate the importance of coupled processes in induced seismicity through the case of the Underground Gas Storage (UGS) project of Castor, Spain, where, cushion gas injection induced hundreds of events, with maximum magnitudes of 4.1, leading to the cancellation of the project. Gas injection lasted for 15 days, and the largest earthquakes occurred 17 days after the stop of injection. Injection overpressures had dissipated by the time of the largest events. The gas was injected at 1.7 km depth, while the induced seismicity occurred at depths ranging from 4 to 10 km. These characteristics of the induced seismicity at Castor pose a challenge on explaining its causes. Coupled processes provide a plausible explanation when combining poromechanical stresses, buoyancy, and shear-slip stress transfer. If coupled processes had been considered in the assessment of the induced seismicity at Castor, the induced earthquakes at Castor could have been anticipated and managed., V.V. acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme through the Starting Grant GEoREST (www.georest.eu) under grant agreement No. 801809. A.V. acknowledges funding from Spanish Ministry of Science and Innovation grant CGL2017-88864-R. IDAEA-CSIC and ICM-CSIC are Centres of Excellence Severo Ochoa (Spanish Ministry of Science and Innovation Grants CEX2018-000794-S and CEX2019-000928-S, respectively, funded by MCIN/AEI/ 10.13039/501100011033)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2018-000794-S) y (CEX2019-000928-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

GEoREST - Workshop on Induced Seismicity

  • CSIC-UIB - Instituto Mediterráneo de Estudios Avanzados (IMEDEA)
GEoREST Workshop on Induced Seismicity that took place from 11th to 13th of March 2024 in Palma., The threat and occurrence of high-magnitude, uncontrolled induced seismicity has been a persisting issue in several kinds of subsurface systems for decades now. Research on limiting induced seismicity to improve the safety of these systems began ever since the first observed cases in wastewater injection. The number of groups working to solve this problem only increased with every major event, focusing on various aspects of induced seismicity. Our understanding of the underlying processes has improved consistently, but the recent events at Pohang, Castor, Groningen, etc., have showcased that there is more to learn in terms of the physics, and demand better characterization, monitoring and forecasting systems in place., This Workshop aims at fostering debate on the latest advances in process understanding, subsurface characterization and forecasting of induced seismicity. We welcome contributions from the academia and industry alike in topics ranging from, but not limited to numerical modeling, laboratory experiments, field studies, application of AI in induced seismicity, etc. We welcome contributions in the form of both posters and oral presentations that broadly fit into the following sessions: + Session 1: Understanding of the causes of induced seismicity + Session 2: Post-injection seismicity: can we forecast it? + Session 3: Subsurface characterization + Session 4: Forecasting induced seismicity + Session 5: Case Studies of induced seismicity., ERC NUMBER — 801809 — GEoREST., Session 1 Understanding of the causes of induced seismicity: Gillian Foulger: HiQuake – a global database of human-induced earthquakes; Keita Yoshioka: Remote hydraulic fracturing at weak interfaces; Marie Violay: Studying Fluid-Induced Earthquakes in the Lab; Jan Dirk Jansen: The Onset of Depletion-Induced Seismicity in Faulted Reservoirs: Uenishi and Rice revisited; Iman R. Kivi: A multi-physics database of injection-induced seismicity in geo-energy projects; Yury Alkhimenkov: Three-dimensional numerical modeling of induced seismicity using high-performance; Haiqing Wu: Poroelastic effects on the nucleation process of dynamic fault rupture during fluid injection; Sandro Andrés Martínez: Pore pressure-dependent friction laws: effects on seismic rupture propagation; Kim Taeho: Factors Controlling Rate and Magnitudes of Induced Seismicity; Sri Kalyan Tangirala: The role of injection protocol on fracture stimulation in enhanced geotermal systems (EGS).-- Session 2 Post-injection seismicity: can we forecast it?: Jean Schmittbuhl: The 2019-2022 sequence of induced seismicity below the city of Strasbourg, France; Yusuke Mukuhira:Revisiting pore pressure behavior at the shut-in phase and causality of large induced seismicity at Basel, Switzerland; Alexis Sáez: Reactivation of fault slip during and after fluid injections; Auregan Boyet: Physic-based modelling to understand and forecast post-injection induced seismicity applied to the Enhanced Geothermal Systems of Basel, Switzerland; Yinlin Ji: Mitigated post-injection seismicity associated with fluid extraction in Enhanced Geothermal Systems: Evidence from lab- and field-scale experiments; Regina Fakhretdinova: Revisiting the Basel-1 hydraulic stimulation with a coupled hydro-mechanical model.-- Session 3 Subsurface characterization: Leo Eisner: Seismic noise model for optimized induced seismicity monitoring; Silvia De Simone: On the equivalent Biot and Skempton coefficients of fractured rocks and their impact on the HM behavior of geological media; Zuzana Jechumtálová: Optimal seismic monitoring network for CO2 injection; Sarah Weihmann: Faults, fractures and the future: unveiling the subsurface for a sustainable energy transition; Qinghua Lei: Characterisation and modelling of fracture networks in rock with application to tunnelling-induced seismicity; Dario Sciandra: Characterizarion of hydro-mechanical properties of fractures in sale; Liudmyla Shumlianska: Nonlinearity approximation and its use in the study of induced seismicity.-- Session 4 Forecasting induced seismicity: Jesús Carrera: Seismicity induced by geoenergy projects: review of processes and simulation methods; Ioannis Stefanou: Preventing human-induced seismicity to fight climate change; James Verdon: An empirically constrained forecasting strategy for induced earthquake magnitudes using extreme value theory; Serge Shapiro: Seismotectonic continuum and the probability of maximum earthquakes triggered by underground technological impacts; Luis Cueto-Felgueroso: Numerical modeling of injection-induced earthquakes in poroelastic media using laboratory-derived friction laws; Sander Osinga: Characterization of magnitude distributions in induced seismicity settings; Matthew Weingarten: Coupling physics-based forecasting and optimization models for induced seismicity mitigation: a case study from the Raton Basin, USA; Sergio Vinciguerra: Using AE based Machine Learning Approaches to Forecast Rupture during Rock Deformation Laboratory Experiments.-- Session 5 Case Studies of induced seismicity: Peter Meier: Status of the learning curve since Basel from the perspective of a project developer; Mateo Acosta: On the need to account for fault strength excess and time-dependent nucleation to model and forecast induced seismicity; Víctor Vilarrasa: Castor undergound gas storage project: lessons learnt to avoid project cancellation by induced seismicity; Grzegorz Kwiatek: Factors characterizing stable seismic energy release during hydraulic stimulations: EGS Helsinki and experimental perspective; Callum Harrison: Moment Tensor Inversion of Microseismicity at the United Downs Deep Geothermal Project, Cornwall; Jin-Han Ree: The 2017 MW 5.4 Pohang ‘triggered’ earthquake and updates; Iman Vaezi: Irreversible strain elucidates microseismicity source mechanisms: Hydroshearing simulation in fractured crystalline rock at BedrettoLab; Martina Rosskopf: Analyzing induced seismicity and their source characteristics during hydraulic stimulations inthe Bedretto Underground Laboratory; Bettina Goertz-Allmann: The value of microseismic in practical applications of CCS monitoring; Linus Walter: Forecasting the Temporal Evolution of Induced Seismicity at the Illinois Basing Decatur Project via Random Forest Model; Yuliia Semenova: Ground Seismic Response Analysis of the Decatur, Ill., CO2 sequestration demonstration site; Germán Rodríguez-Pradilla: Quantifying the variability in fault density across the UK Bowland Shale, with implications for CCS-induced seismicity hazard in the UK Continental Shelf; Sara Hanson-Hedgecock: Probabilistic Data Fusion for Evaluating Induced Seismic Hazards in Enhanced Geothermal Systems; Closing of the workshop: Víctor Vilarrasa (CSIC).-- Poster sessions; Antony Butcher Induced and Tectonic Seismic Characterisation using Downhole Recordings from Cornwall, UK; Gemma Maria Cipressi A methodological approach to characterize seismicity induced by geofluids; Yusuke Mukuhira Machine learning multivariate analysis for injection-induced seismicity risk evaluation; Haiqing Wu Stochastic poromechanical analysis of induced seismicity – application to the Pohang Mw 5.5 earthquake; Auregan Boyet Forecasting induced seismicity to investigate the most convenient strategy for injection and cessation of injection; Iman Vaezi Implicit Modeling of a Single Fracture Using a Continuum Equivalent Layer for Simulating Coupled Processes; Víctor Vilarrasa GEoREST: predictinG EaRthquakES induced by fluid injecTion; Tian Guo Reducing Subsurface Uncertainty with a Machine Learning Model Based on Ground Deformation Measurement; Zhen Xu Strategy for Evaluating Coupled THMC Processes during Underground Hydrogen Storage; Sanchit Sachdeva Fault Stability and Induced Seismicity Under Cycle Injection and Production of H2., Peer reviewed