Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Analyzing the efficiency of hybrid codes

  • Giménez Lucas, Judit
  • Mercadal, Estanislao
  • Llort, German
  • Méndez, Sandra
Hybrid parallelization may be the only path for most codes to use HPC systems on a very large scale. Even within a small scale, with an increasing number of cores per node, combining MPI with some shared memory thread-based library allows to reduce the application network requirements. Despite the benefits of a hybrid approach, it is not easy to achieve an efficient hybrid execution. This is not only because of the added complexity of combining two different programming models, but also because in many cases the code was initially designed with just one level of parallelization and later extended to a hybrid mode. This paper presents our model to diagnose the efficiency of hybrid applications, distinguishing the contribution of each parallel programming paradigm. The flexibility of the proposed methodology allows us to use it for different paradigms and scenarios, like comparing the MPI+OpenMP and MPI+CUDA versions of the same code., This work has been partially developed under the scope of POP CoE which has received funding from the European Union´s Horizon 2020 research and innovation programme (under grant agreements No. 676553 and 824080), and with the support of the Comision Interministerial de Ciencia y Tecnología (CICYT) under contract No. PID2019- 107255GB-C22. We also want to acknowledge the ChEESE CoE and the EDANYA group from Universidad de Málaga (www.uma.es/edanya) that granted us permission to report on the Tsunami-HySEA analysis., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

CoreNEURON: Performance and Energy Efficiency Evaluation on Intel and Arm CPUs

  • Criado, Joel
  • Garcia Gasulla, Marta|||0000-0003-3682-9905
  • Kumbhar, Pramod
  • Awile, Omar
  • Magkanaris, Ioannis
  • Mantovani, Filippo|||0000-0003-3559-4825
The simulation of detailed neuronal circuits is based on computationally expensive software simulations and requires access to a large computing cluster. The appearance of new Instruction Set Architectures (ISAs) in most recent High-Performance Computing (HPC) systems, together with the layers of system software and complex scientific applications running on top of them, makes the performance and power figures challenging to evaluate. In this paper, we focus on evaluating CoreNEURON on two HPC systems powered by Intel and Arm architectures. CoreNEURON is a computational engine of the widely used NEURON simulator adapted to run on emerging architectures while maintaining compatibility with existing NEURON models developed by the neuroscience community. The evaluation is based on the analysis of the dynamic instruction mix on two versions of CoreNEURON. It focuses on the performance gain obtained by exploiting the Single Instruction Multiple Data (SIMD) unit and includes energy measurements. Our results show that using a tool for increasing data-level parallelism (ISPC) boosts the performance up to 2× independently on the ISA. Its combination with vendor-specific compilers can further speed up the neural simulation time. Also, the performance/price ratio is higher for Arm-based systems than for Intel ones making them more cost-efficient keeping the same usability level of other HPC systems., This work is partially supported by the Spanish Government (SEV-2015-0493), by the Spanish Ministry of Science and Technology (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), by the European Mont-Blanc 3 project (GA n. 671697), Human Brain Project SGA2 (GA n. 785907), and POP CoE (GA n. 824080)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Performance study of HPC applications on an Arm-based cluster using a generic efficiency model

  • Banchelli Gracia, Fabio
  • Peiró Conde, Kilian
  • Querol de Porras, Andrea
  • Ramírez Gargallo, Guillem
  • Ramírez Miranda, Guillem
  • Vinyals Ylla-Català, Joan
  • Vizcaíno Serrano, Pablo
  • Garcia Gasulla, Marta|||0000-0003-3682-9905
  • Mantovani, Filippo|||0000-0003-3559-4825
HPC systems and parallel applications are increasing their complexity. Therefore the possibility of easily study and project at large scale the performance of scientific applications is of paramount importance. In this paper we describe a performance analysis method and we apply it to four complex HPC applications. We perform our study on a pre-production HPC system powered by the latest Arm-based CPUs for HPC, the Marvell ThunderX2. For each application we spot inefficiencies and factors that limit their scalability. The results show that in several cases the bottlenecks do not come from the hardware but from the way applications are programmed or the way the system software is configured., This work is partially supported by the Spanish Government (SEV-2015-0493), by the Spanish Ministry of Science and Technology (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), and by the European MontBlanc 3 project (GA n. 671697) and POP CoE (GA n. 824080)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Cluster of emerging technology: evaluation of a production HPC system based on A64FX

  • Banchelli Gracia, Fabio
  • Peiró Conde, Kilian
  • Ramírez Gargallo, Guillem
  • Vinyals Ylla-Català, Joan
  • Vicente Dorca, David
  • Garcia Gasulla, Marta|||0000-0003-3682-9905
  • Mantovani, Filippo|||0000-0003-3559-4825
Clusters of emerging technologies are appearing with more and more frequency in HPC. After years of skepticism, data-centers are adopting them as production systems thanks to several geopolitical and technological factors. The most honorable example is the Fugaku supercomputer, powered by the latest Fujitsu A64FX CPU. Which is the behavior of mature HPC codes on such emerging technology clusters? Which performance will obtain scientists when running their HPC applications “as is” on these clusters? This paper presents the evaluation of CTE-Arm, a Fugaku-like system, including both fine-tuned micro-benchmarks and five scientific applications run without prior fine-tuning: Alya, NEMO, Gromacs, OpenIFS, and WRF. Results show that while micro-architectural benchmarks show performance as expected, the performance obtained running HPC applications not tuned for a specific architecture are between 2× and 4× slower compared with a standard Intel-based HPC system. Therefore further effort is needed to improve tools (e.g., compilers) and system software (e.g., MPI libraries) to ease applications deployment and improve their performance., This work is partially supported by the Spanish Government (SEV-2015-0493), by the Spanish Ministry of Science and Technology (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), by the European and Horizon 2020 POP CoE (GA n. 824080)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Lessons Learned from a Performance Analysis and Optimization of a Multiscale Cellular Simulation

  • Clasca, Marc
  • Garcia Gasulla, Marta|||0000-0003-3682-9905
  • Montagud, Arnau|||0000-0002-7696-1241
  • Carbonell Caballero, José
  • Valencia, Alfonso|||0000-0002-8937-6789
This work presents a comprehensive performance analysis and optimization of a multiscale agent-based cellular simulation. The optimizations applied are guided by detailed performance analysis and include memory management, load balance, and a locality-aware parallelization. The outcome of this paper is not only the speedup of 2.4x achieved by the optimized version with respect to the original PhysiCell code, but also the lessons learned and best practices when developing parallel HPC codes to obtain efficient and highly performant applications, especially in the computational biology field., This work has received funding from the EU Horizon 2020 POP2 (grant agreement No 824080), PerMedCoE (grant agreement No 951773), and by the Spanish Government(PID2019-107255GB)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

TALP: A Lightweight Tool to Unveil Parallel Efficiency of Large-scale Executions

  • Lopez, Victor
  • Ramirez Miranda, Guillem
  • Garcia Gasulla, Marta|||0000-0003-3682-9905
This paper presents the design, implementation, and application of TALP, a lightweight, portable, extensible, and scalable tool for online parallel performance measurement. The efficiency metrics reported by TALP allow HPC users to evaluate the parallel efficiency of their executions, both post-mortem and at runtime. The API that TALP provides allows the running application or resource managers to collect performance metrics at runtime. This enables the opportunity to adapt the execution based on the metrics collected dynamically. The set of metrics collected by TALP are well defined, independent of the tool, and consolidated. We extend the collection of metrics with two additional ones that can differentiate between the load imbalance originated from the intranode or internode imbalance. We evaluate the potential of TALP with three parallel applications that present various parallel issues and carefully analyze the overhead introduced to determine its limitations., This work is partially supported by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), and by the European POP CoE (GA n. 824080)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of state-of-the-art HPC clusters with a production CFD code

  • Banchelli Gracia, Fabio
  • Garcia Gasulla, Marta|||0000-0003-3682-9905
  • Houzeaux, Guillaume|||0000-0002-2592-1426
  • Mantovani, Filippo|||0000-0003-3559-4825
Computing technologies populating high-performance computing (HPC) clusters are getting more and more diverse, offering a wide range of architectural features. As a consequence, efficient programming of such platforms becomes a complex task. In this paper we provide a micro-benchmarking of three HPC clusters based on different CPU architectures, predominant in the Top500 ranking: x86, Armv8 and IBM Power9. On these platforms we study a production fluid-dynamics application leveraging different compiler technologies and micro-architectural features. We finally provide a scalability study on state-of-the-art HPC clusters. The two most relevant conclusions of our study are: i) Compiler development is critical for squeezing performance out of most recent technologies; ii) Micro-architectural features such as Single Instruction Multiple Data (SIMD) units and Simultaneous Multi-Threading (SMT) can impact the overall performance. However, a closer look shows that while SIMD is improving the performance of compute bound regions, SMT does not show a clear benefit on HPC workloads., The authors thank the support team of Dibona operating at ATOS/Bull. This work is partially supported by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), the Spanish Ministry of Science and Technology (project TIN2015-65316-P), the Generalitat de Catalunya (2017-SGR-1414), the European project Mont-Blanc 3 (GA n. 671697), and the European centre of excellence on HPC POP2 (GA n. 824080)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Lessons Learned from a Performance Analysis and Optimization of a Multiscale Cellular Simulation

  • Clasca, Marc
  • Garcia Gasulla, Marta
  • Montagud, Arnau
  • Carbonell Caballero, José
  • Valencia, Alfonso
This work presents a comprehensive performance analysis and optimization of a multiscale agent-based cellular simulation. The optimizations applied are guided by detailed performance analysis and include memory management, load balance, and a locality-aware parallelization. The outcome of this paper is not only the speedup of 2.4x achieved by the optimized version with respect to the original PhysiCell code, but also the lessons learned and best practices when developing parallel HPC codes to obtain efficient and highly performant applications, especially in the computational biology field., This work has received funding from the EU Horizon 2020 POP2 (grant agreement No 824080), PerMedCoE (grant agreement No 951773), and by the Spanish Government(PID2019-107255GB)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Cluster of emerging technology: evaluation of a production HPC system based on A64FX

  • Banchelli Gracia, Fabio
  • Peiró Conde, Kilian
  • Ramírez Gargallo, Guillem
  • Vinyals Ylla-Català, Joan
  • Vicente Dorca, David
  • Garcia Gasulla, Marta
  • Mantovani, Filippo
Clusters of emerging technologies are appearing with more and more frequency in HPC. After years of skepticism, data-centers are adopting them as production systems thanks to several geopolitical and technological factors. The most honorable example is the Fugaku supercomputer, powered by the latest Fujitsu A64FX CPU. Which is the behavior of mature HPC codes on such emerging technology clusters? Which performance will obtain scientists when running their HPC applications “as is” on these clusters? This paper presents the evaluation of CTE-Arm, a Fugaku-like system, including both fine-tuned micro-benchmarks and five scientific applications run without prior fine-tuning: Alya, NEMO, Gromacs, OpenIFS, and WRF. Results show that while micro-architectural benchmarks show performance as expected, the performance obtained running HPC applications not tuned for a specific architecture are between 2× and 4× slower compared with a standard Intel-based HPC system. Therefore further effort is needed to improve tools (e.g., compilers) and system software (e.g., MPI libraries) to ease applications deployment and improve their performance., This work is partially supported by the Spanish Government (SEV-2015-0493), by the Spanish Ministry of Science and Technology (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), by the European and Horizon 2020 POP CoE (GA n. 824080)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Analyzing the efficiency of hybrid codes

  • Giménez Lucas, Judit
  • Mercadal, Estanislao
  • Llort, German
  • Méndez, Sandra
Hybrid parallelization may be the only path for most codes to use HPC systems on a very large scale. Even within a small scale, with an increasing number of cores per node, combining MPI with some shared memory thread-based library allows to reduce the application network requirements. Despite the benefits of a hybrid approach, it is not easy to achieve an efficient hybrid execution. This is not only because of the added complexity of combining two different programming models, but also because in many cases the code was initially designed with just one level of parallelization and later extended to a hybrid mode. This paper presents our model to diagnose the efficiency of hybrid applications, distinguishing the contribution of each parallel programming paradigm. The flexibility of the proposed methodology allows us to use it for different paradigms and scenarios, like comparing the MPI+OpenMP and MPI+CUDA versions of the same code., This work has been partially developed under the scope of POP CoE which has received funding from the European Union´s Horizon 2020 research and innovation programme (under grant agreements No. 676553 and 824080), and with the support of the Comision Interministerial de Ciencia y Tecnología (CICYT) under contract No. PID2019- 107255GB-C22. We also want to acknowledge the ChEESE CoE and the EDANYA group from Universidad de Málaga (www.uma.es/edanya) that granted us permission to report on the Tsunami-HySEA analysis., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of state-of-the-art HPC clusters with a production CFD code

  • Banchelli Gracia, Fabio
  • Garcia Gasulla, Marta
  • Houzeaux, Guillaume
  • Mantovani, Filippo
Computing technologies populating high-performance computing (HPC) clusters are getting more and more diverse, offering a wide range of architectural features. As a consequence, efficient programming of such platforms becomes a complex task. In this paper we provide a micro-benchmarking of three HPC clusters based on different CPU architectures, predominant in the Top500 ranking: x86, Armv8 and IBM Power9. On these platforms we study a production fluid-dynamics application leveraging different compiler technologies and micro-architectural features. We finally provide a scalability study on state-of-the-art HPC clusters. The two most relevant conclusions of our study are: i) Compiler development is critical for squeezing performance out of most recent technologies; ii) Micro-architectural features such as Single Instruction Multiple Data (SIMD) units and Simultaneous Multi-Threading (SMT) can impact the overall performance. However, a closer look shows that while SIMD is improving the performance of compute bound regions, SMT does not show a clear benefit on HPC workloads., The authors thank the support team of Dibona operating at ATOS/Bull. This work is partially supported by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), the Spanish Ministry of Science and Technology (project TIN2015-65316-P), the Generalitat de Catalunya (2017-SGR-1414), the European project Mont-Blanc 3 (GA n. 671697), and the European centre of excellence on HPC POP2 (GA n. 824080)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Performance study of HPC applications on an Arm-based cluster using a generic efficiency model

  • Banchelli Gracia, Fabio
  • Peiró Conde, Kilian
  • Querol de Porras, Andrea
  • Ramírez Gargallo, Guillem
  • Ramírez Miranda, Guillem
  • Vinyals Ylla-Català, Joan
  • Vizcaíno Serrano, Pablo
  • Garcia Gasulla, Marta
  • Mantovani, Filippo
HPC systems and parallel applications are increasing their complexity. Therefore the possibility of easily study and project at large scale the performance of scientific applications is of paramount importance. In this paper we describe a performance analysis method and we apply it to four complex HPC applications. We perform our study on a pre-production HPC system powered by the latest Arm-based CPUs for HPC, the Marvell ThunderX2. For each application we spot inefficiencies and factors that limit their scalability. The results show that in several cases the bottlenecks do not come from the hardware but from the way applications are programmed or the way the system software is configured., This work is partially supported by the Spanish Government (SEV-2015-0493), by the Spanish Ministry of Science and Technology (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), and by the European MontBlanc 3 project (GA n. 671697) and POP CoE (GA n. 824080)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

TALP: A Lightweight Tool to Unveil Parallel Efficiency of Large-scale Executions

  • Lopez, Victor
  • Ramirez Miranda, Guillem
  • Garcia Gasulla, Marta
This paper presents the design, implementation, and application of TALP, a lightweight, portable, extensible, and scalable tool for online parallel performance measurement. The efficiency metrics reported by TALP allow HPC users to evaluate the parallel efficiency of their executions, both post-mortem and at runtime. The API that TALP provides allows the running application or resource managers to collect performance metrics at runtime. This enables the opportunity to adapt the execution based on the metrics collected dynamically. The set of metrics collected by TALP are well defined, independent of the tool, and consolidated. We extend the collection of metrics with two additional ones that can differentiate between the load imbalance originated from the intranode or internode imbalance. We evaluate the potential of TALP with three parallel applications that present various parallel issues and carefully analyze the overhead introduced to determine its limitations., This work is partially supported by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), and by the European POP CoE (GA n. 824080)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

CoreNEURON: Performance and Energy Efficiency Evaluation on Intel and Arm CPUs

  • Criado, Joel
  • Garcia Gasulla, Marta
  • Kumbhar, Pramod
  • Awile, Omar
  • Magkanaris, Ioannis
  • Mantovani, Filippo
The simulation of detailed neuronal circuits is based on computationally expensive software simulations and requires access to a large computing cluster. The appearance of new Instruction Set Architectures (ISAs) in most recent High-Performance Computing (HPC) systems, together with the layers of system software and complex scientific applications running on top of them, makes the performance and power figures challenging to evaluate. In this paper, we focus on evaluating CoreNEURON on two HPC systems powered by Intel and Arm architectures. CoreNEURON is a computational engine of the widely used NEURON simulator adapted to run on emerging architectures while maintaining compatibility with existing NEURON models developed by the neuroscience community. The evaluation is based on the analysis of the dynamic instruction mix on two versions of CoreNEURON. It focuses on the performance gain obtained by exploiting the Single Instruction Multiple Data (SIMD) unit and includes energy measurements. Our results show that using a tool for increasing data-level parallelism (ISPC) boosts the performance up to 2× independently on the ISA. Its combination with vendor-specific compilers can further speed up the neural simulation time. Also, the performance/price ratio is higher for Arm-based systems than for Intel ones making them more cost-efficient keeping the same usability level of other HPC systems., This work is partially supported by the Spanish Government (SEV-2015-0493), by the Spanish Ministry of Science and Technology (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), by the European Mont-Blanc 3 project (GA n. 671697), Human Brain Project SGA2 (GA n. 785907), and POP CoE (GA n. 824080)., Peer Reviewed, Postprint (author's final draft)