Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Structural application of recycled aggregate concrete within the fib Model Code 2020 and the new Eurocode 2: overview of design provisions, background and work of fib Task Group 4.7

  • Tošić, Nikola|||0000-0003-0242-8804
  • Torrenti, Jean-Michel
The need to use recycled aggregate (RA) in the production of recycled aggregate concrete (RAC) is increasingly recognized as a necessary and viable way to improving the sustainability of concrete production and saving scarce natural resources. For this purpose, over the last decades, a significant body of knowledge on RAC physical-mechanical, durability and structural properties has been generated by researchers and practitioners. However, what was missing was the standardization of this knowledge into structural design codes. With this aim, the fib Model Code 2020 (MC2020) and the new revision of Eurocode 2 (prEN1992-1-1) contain sections dedicated to the structural design of RAC with provisions for the modification of mechanical properties and resistance models. In parallel, background documents supporting the adopted provisions have been prepared. This work is organized through a new Task Group of the fib, TG4.7 “Structural Applications of Recycled Aggregate Concrete: Properties, Modeling and Design” which is preparing an extensive state of the art bulletin with background information on experimental, analytical and numerical research on RAC. Within this paper, the incorporation of RAC into MC2020 and prEN1992-1-1 is presented and discussed, alongside main implications, and an over-view of the background information being prepared by TG4.7 is given., This study has received funding from the European Union’s Horizon 2020 research and innovation pro-gramme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Reliability-based assessment of the Eurocode 2-revision and fib Model Code 2020 shear strength models for fibre reinforced concrete members without shear reinforcement

  • Tošić, Nikola|||0000-0003-0242-8804
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Fernández Ruíz, Miguel
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Structural design of fibre reinforced concrete (FRC) was first introduced on an international level in the fib Model Code 2010. Since then, and facilitated by this and many other advances in research and practice, its market uptake and practical applications have increased substantially. This has been recognized by policy makers and thus, provisions for FRC structural design are also being introduced into the Eurocode 2-revision (prEN1992-1-1:2021) as well as the new fib Model Code 2020. However, such changes also carry a significant responsibility of a comprehensive reliability assessment of the proposed design models. One of the most important aspects of ultimate limit state (ULS) design of FRC is the shear strength of members without shear reinforcement, mostly due to the associated uncertainty and potentially brittle failure modes. Within this frame, this paper presents a reliability-based assessment and calibration of the partial factor for FRC. To do this, the safety format of the Eurocode 2-revision and fib Model Code 2020 models for the shear strength of FRC members without shear reinforcement are assessed and the resulting partial safety factors for FRC are determined. First, a database of experimental results on FRC beams is used to determine model errors. On that basis, a probabilistic analysis is performed using the First Order Reliability Method to determine adequate values of the partial factor for varying target reliability indexes. Finally, a discussion is presented on how the proposed models can ensure typical reliability indexes adopted for ULS design., This study has received funding from the European Union’s Horizon 2020 research and innovation pro-gramme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Development and assessment of a modified ζ-method for deflection control of two-way slabs

  • Tošić, Nikola|||0000-0003-0242-8804
  • Pecic, Nenad
  • Marí Bernat, Antonio Ricardo|||0000-0002-0994-0715
  • Torres Llinàs, Lluís
  • Dragaš, Jelena
  • Poliotti, Mauro
Deflection control of two-way slabs is a very complex task considering their possible geometries, structural systems, reinforcement layouts and loading histories, as well as the large number of influencing parameters and moment redistribution due to cracking and time-dependent effects of creep and shrinkage. As a consequence, sufficiently simple and accurate methods for deflection control of two-way reinforced concrete slabs have are still missing. In order to fill this gap, a novel method was developed as an adaptation of the ζ-method (as defined by the fib Model Code 2010) of interpolating deflections between the uncracked and fully cracked state. The method is based on deflections obtained using linear-elastic analyses in finite element software, which are then transformed through a series of stiffness normalizations to obtain time-dependent deflections due to load and shrinkage. Furthermore, the moment redistribution capacity of two-way slabs is accounted for through adjustments of the interpolation coefficient ζ. The method is tested against available experimental results from literature and compared with results obtained using existing methods such as the crossing beam method. The results show good precision and accuracy of the proposed method and an improvement compared with existing methods., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Reliability-based assessment of the Eurocode 2-revision and fib Model Code 2020 shear strength models for fibre reinforced concrete members without shear reinforcement

  • Tošić, Nikola
  • Bairán García, Jesús Miguel
  • Fernández Ruíz, Miguel
  • Fuente Antequera, Albert de la
Structural design of fibre reinforced concrete (FRC) was first introduced on an international level in the fib Model Code 2010. Since then, and facilitated by this and many other advances in research and practice, its market uptake and practical applications have increased substantially. This has been recognized by policy makers and thus, provisions for FRC structural design are also being introduced into the Eurocode 2-revision (prEN1992-1-1:2021) as well as the new fib Model Code 2020. However, such changes also carry a significant responsibility of a comprehensive reliability assessment of the proposed design models. One of the most important aspects of ultimate limit state (ULS) design of FRC is the shear strength of members without shear reinforcement, mostly due to the associated uncertainty and potentially brittle failure modes. Within this frame, this paper presents a reliability-based assessment and calibration of the partial factor for FRC. To do this, the safety format of the Eurocode 2-revision and fib Model Code 2020 models for the shear strength of FRC members without shear reinforcement are assessed and the resulting partial safety factors for FRC are determined. First, a database of experimental results on FRC beams is used to determine model errors. On that basis, a probabilistic analysis is performed using the First Order Reliability Method to determine adequate values of the partial factor for varying target reliability indexes. Finally, a discussion is presented on how the proposed models can ensure typical reliability indexes adopted for ULS design., This study has received funding from the European Union’s Horizon 2020 research and innovation pro-gramme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Development and assessment of a modified ζ-method for deflection control of two-way slabs

  • Tošić, Nikola
  • Pecic, Nenad
  • Marí Bernat, Antonio Ricardo
  • Torres Llinàs, Lluís
  • Dragaš, Jelena
  • Poliotti, Mauro
Deflection control of two-way slabs is a very complex task considering their possible geometries, structural systems, reinforcement layouts and loading histories, as well as the large number of influencing parameters and moment redistribution due to cracking and time-dependent effects of creep and shrinkage. As a consequence, sufficiently simple and accurate methods for deflection control of two-way reinforced concrete slabs have are still missing. In order to fill this gap, a novel method was developed as an adaptation of the ζ-method (as defined by the fib Model Code 2010) of interpolating deflections between the uncracked and fully cracked state. The method is based on deflections obtained using linear-elastic analyses in finite element software, which are then transformed through a series of stiffness normalizations to obtain time-dependent deflections due to load and shrinkage. Furthermore, the moment redistribution capacity of two-way slabs is accounted for through adjustments of the interpolation coefficient ζ. The method is tested against available experimental results from literature and compared with results obtained using existing methods such as the crossing beam method. The results show good precision and accuracy of the proposed method and an improvement compared with existing methods., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Structural application of recycled aggregate concrete within the fib Model Code 2020 and the new Eurocode 2: overview of design provisions, background and work of fib Task Group 4.7

  • Tošić, Nikola
  • Torrenti, Jean-Michel
The need to use recycled aggregate (RA) in the production of recycled aggregate concrete (RAC) is increasingly recognized as a necessary and viable way to improving the sustainability of concrete production and saving scarce natural resources. For this purpose, over the last decades, a significant body of knowledge on RAC physical-mechanical, durability and structural properties has been generated by researchers and practitioners. However, what was missing was the standardization of this knowledge into structural design codes. With this aim, the fib Model Code 2020 (MC2020) and the new revision of Eurocode 2 (prEN1992-1-1) contain sections dedicated to the structural design of RAC with provisions for the modification of mechanical properties and resistance models. In parallel, background documents supporting the adopted provisions have been prepared. This work is organized through a new Task Group of the fib, TG4.7 “Structural Applications of Recycled Aggregate Concrete: Properties, Modeling and Design” which is preparing an extensive state of the art bulletin with background information on experimental, analytical and numerical research on RAC. Within this paper, the incorporation of RAC into MC2020 and prEN1992-1-1 is presented and discussed, alongside main implications, and an over-view of the background information being prepared by TG4.7 is given., This study has received funding from the European Union’s Horizon 2020 research and innovation pro-gramme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Postprint (published version)