Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

Multi-interface network framework for UAV management and data communications

  • Sánchez Agüero, Víctor
  • Fas-Millán, Miguel Ángel
  • Valera Pintor, Francisco
  • Vidal Fernández, Iván
  • Paniagua Tineo, Alejandro
  • López da Silva, Rafael A.
  • Manjón, José Manuel
Proceeding of 2021 IEEE Globecom Workshops (GC Wkshps), Madrid, Spain, 7-11 December 2021., Recent efforts to manage Unmanned Aerial Vehicle (UAV) operations in European civilian environments have resulted in the development of U-space, the European Union’s UAS Traffic Management (UTM) concept of operations. This paper presents the primary purposes of the H2020 Labyrinth project (mainly focusing on the communications architecture), which has as its main challenge to create and validate UAV applications through the research and development of path-planning algorithms and new UTM services. In addition, this article performs a preliminary validation of a communications prototype (including three communication alternatives) with real equipment of the National Institute of Aerospace Technology (INTA) of the Spanish Ministry of Defense. The presented results show the functionality of the prototypes and serve as a starting point to develop the requirements defined in the communications architecture., This article has been supported by the H2020 Labyrinth project (grant agreement 861696), and the TRUE5G project funded by the Spanish National Research Agency (PID2019-108713RB681 C52/AEI/10.13039/501100011033), the Madrid Government (Comunidad de Madrid-Spain) under the Multiannual Agreement with UC3M in the line of Excellence of University Professors (EPUC3M21), and in the context of the V PRICIT (Regional Programme of Research and Technological Innovation)., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

A virtualization approach to validate services and subsystems of a MALE UAS

  • Sánchez Agüero, Víctor
  • Valera Pintor, Francisco
  • Vidal Fernández, Iván
  • Nogales Dorado, Borja
  • Cabezas, Jaime
  • Vidal Bustos, Carlos
Proceedings of: 2022 IEEE International Conference on Computer Communications (IEEE INFOCOM), 02-05 May 2022, New York, USA., Current trends in Unmanned Aircraft Systems (UAS) aim at embedding intelligent functionality into these devices to enhance their utilization beyond their traditional video monitoring and recording operations, using them as complex mobile computing platforms or to support flexible communication network infrastructures. As a consequence, while UAS necessarily increase their complexity, the whole development cycle of services/applications of UAS, together with the management, operation, testing, validation, and maintenance, becomes even more challenging since the computing hardware has to be onboarded and ready to fly. This article presents a Medium Altitude Long Endurance (MALE) surveillance UAS developed by the Spanish Ministry of Defense (the MILANO, from the National Institute of Aerospace Technology), used as a reference for the developments in this paper. The article also presents the virtualization platform that is being used in the system to facilitate the deployment of all the communication service components in the real MILANO platform (e.g., routing, switching, channel selection functionalities), although it also supports other types of applications (e.g., telemetry preprocessing, including sensors and video, route planning). In addition, this platform is complemented by an emulation infrastructure (to reproduce different mobility patterns and radio communication link status) used to boost the whole testing and validation cycle before onboarding the hardware and scheduling expensive flight campaigns, and facilitating the overall UAS software maintenance during the operations phase. Finally, the article describes the experiments performed with the MILANO equipment, validating the application and functionality of the overall platform., This work has been supported by the Madrid Government (Comunidad de Madrid-Spain) under the Multiannual Agreement with UC3M in the line of Excellence of University Professors (EPUC3M21), in the context of the V PRICIT (Regional Programme of Research and Technological Innovation), the TRUE5G (PID2019108713RB681) project funded by the Spanish National Research Agency (MCIN/AEI/10.13039/501100011033), and the H2020 Labyrinth project (grant agreement 861696). The authors wish to thank Alicia López Campos for her support during the experiments.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Contribución de congreso (ConferenceOutput)

An NFV system to support service provisioning on UAV networks

  • Nogales Dorado, Borja
  • Vidal Fernández, Iván
  • Sánchez Agüero, Víctor
  • Valera Pintor, Francisco
  • González Blázquez, Luis Félix
In this presentation, we will first describe the design and implementation of an NFV system capable of deploying moderately complex network services over a wireless ad-hoc network of resource-constrained compute nodes. The system design targets aerial networks built by Unmanned Aerial Vehicles (UAVs), and it relies on container virtualization to support the execution of network functions within constrained environments, as well as on mobile ad-hoc networking to support the underlying end-to-end network communications [1]. The presentation will also cover the implementation experience from developing this NFV system, which is based on relevant and widely-adopted open-source technologies in the NFV arena such as ETSI Open-Source MANO (OSM) and OpenStack. In addition, we will present the details concerning the integration of this system into a distributed NFV testbed spanning three different remote sites in Spain, i.e., Universidad Carlos III de Madrid (UC3M), Universidad Politécnica de Cataluña (UPC), and Universidad del País Vasco (UPV-EHU). The goal of this testbed is to explore synergies among NFV, UAVs, and 5G vertical services, following a practical approach primarily governed by experimentation. To showcase the potential of this testbed to support vertical services, we will present three different use cases that have been realized as part of our prior research work: i) the automated deployment of an IP telephony service on a delimited geographic area, using a network of interconnected UAVs [2] (noteworthily, this work was awarded by ETSI as the best proof-of-concept demonstration with OSM during the OSM Release Eight cycle [3]); ii) the realization of a smart farming vertical service [4]; and iii) a public-safety vertical use case, which uses aerial and vehicular NFV infrastructures to monitor traffic conditions and handle emergency situations [5]. This latter involves an international collaboration with the Instituto de Telecomunicações of Aveiro, which operates a vehicular NFV infrastructure. Finally, the presentation will tackle the standardization challenges related with the future view of a decentralized and flexible MANO framework, capable of supporting the operation of cost-effective, reliable services beyond the edge of the telecommunication operator infrastructures. In this view, multiple stakeholders would collaboratively provide a wide range of heterogeneous compute-connect devices (e.g., end-user terminals, CPEs, or UAV swarms). These devices might exist and be opportunistically used, or they could otherwise be deployed on-demand by those stakeholders, contributing to the availability of a potentially unlimited pool of network, computing, and storage resources beyond the network edge. This view introduces several standardization challenges to the NFV MANO framework in terms of interoperation, flexibility, robustness, and security. These challenges have been presented at the NFV Evolution1 event organized by ETSI, and will build the basis of our future work in this research line., This work has been partially supported by the European H2020 LABYRINTH project (grant agreement H2020-MG-2019-TwoStages-861696), and by the TRUE5G project (PID2019-108713RB-C52PID2019-108713RBC52/AEI/10.13039/501100011033) funded by the Spanish National Research Agency.
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Planificación y manejo de conflictos basado en fast marching square para UAVs en entornos 3D de grandes dimensiones, Fast Marching Square-based planning and conflict management strategy for UAVs in large 3D environments

  • Palomino, Blanca L.
  • Muñoz Mendi, Javier
  • Moreno Lorente, Luis
[Resumen] Los sistemas multi UAV se alzan en la actualidad como una solución potente a la hora de desempeñar y agilizar tareas que pueden resultar peligrosas o tediosas para las personas: tareas de búsqueda y rescate, inspección y vigilancia de instalaciones, entrega de mercancías, tareas de agricultura y conservación de la vida silvestre, etc. En este contexto, este trabajo propone una estrategia rápida de planicación de trayectorias en entornos 3D de grandes dimensiones para UAVs basada en Fast Marching Square y un sencillo y eficiente control de velocidad basado en prioridades como método de resolución de conflictos entre vehículos. El rendimiento del algoritmo se evalúa en base a ciertas medidas estadísticas recogidas convenientemente a lo largo de simulaciones., [Abstract] Multi-UAV systems are currently emerging as a powerful solution to perform and speed up tasks that can be dangerous or tedious for people: search and rescue tasks, inspection and surveillance of facilities, delivery of goods, agriculture and wildlife conservation tasks, etc. In this context, this work proposes a fast trajectory planning strategy in large 3D environments for UAVs based on Fast Marching Square and a simple and efficient priority-based speed control method for resolving conflicts between vehicles. The performance of the algorithm is evaluated based on certain statistical measures collected throughout simulations., Comunidad de Madrid; S2018/NMT-4331
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

CollisionGP: comprobación de colisiones probabilística con procesos gaussianos, CollisionGP: probabilistic collision checking with Gaussian processes

  • Muñoz, Javier
  • Moreno, Luis
[Resumen] La comprobación de colisiones es la operación primitiva de la planificación de movimientos que más tiempo consume. Se ha demostrado que los algoritmos de aprendizaje automático aceleran la comprobación de colisiones. Presentamos CollisionGP, un algoritmo basado en procesos gaussianos para modelar el espacio de configuraciones de un robot y comprobar colisiones. CollisionGP introduce una variable auxiliar Pòlya-Gamma para cada punto de datos en el conjunto de entrenamiento para permitir que la inferencia de clasificación se realice exactamente con una expresión de forma cerrada. Los procesos gaussianos proporcionan una distribución como salida, obteniendo una media y una varianza para la comprobación de colisión. La varianza obtenida se procesa para reducir los falsos negativos (FN). Demostramos que CollisionGP puede utilizar la aceleración de la GPU para procesar comprobaciones de colisiones para miles de configuraciones mucho más rápido que las librerías tradicionales de detección de colisiones. Además, obtenemos mejores resultados de precisión, ratio de verdaderos positivos (TPR) y verdaderos positivos (TNR) que los algoritmos del estado del arte basados en aprendizaje utilizando menos puntos de soporte, lo que hace que nuestro método sea más ligero., [Abstract] Collision checking is the primitive operation of motion planning that consumes most time. Machine learning algorithms have proven to accelerate collision checking. We propose CollisionGP, a Gaussian process-based algorithm for modeling a robot’s configuration space and query collision checks. CollisionGP introduces a P`olya-Gamma auxiliary variable for each data point in the training set to allow classification inference to be done exactly with a closed-form expression. Gaussian processes provide a distribution as the output, obtaining a mean and variance for the collision check. The obtained variance is processed to reduce false negatives (FN). We demonstrate that CollisionGP can use GPU acceleration to process collision checks for thousands of configurations much faster than traditional collision detection libraries. Furthermore, we obtain better accuracy, true positive rate (TPR) and true negative rate (TNR) results than state-of-the-art learning-based algorithms using less support points, thus making our proposed method more sparse., Comunidad de Madrid; S2018/NMT-4331