Skip to main content

SISTEMA DE APOYO A LA TOMA DE DECISIONES DURANTE EL CICLO DE VIDA DE LAS INFRAESTRUCTURAS: SMART-INFRASTRUCTURES

BIA2013-47290-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

The dynamic assessment of structural condition by measurement error-minimizing observability method

  • Peng, Tian
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
  • Turmo Coderque, José|||0000-0001-5001-2438
The structural identification using dynamic parameters (such as the natural vibration frequencies and mode shapes of the structure) is an important issue especially in slender structures such as long-span bridges or high-rise buildings. It is the most popular way to assess the structural condition along the service life . This article presents a new approach, under the framework of Structural System Identificaction by Observability Method (OM), to perform the structural system identification. The method is able of determining which actual structural properties (like Young’s modulus, area, inertia, mass) can be uniquely detected when an appropriate subset of mode-shapes and frequencies of the whole structure is provided. Error-Minimizing Observability Method (EMOM), which separates and merges the error items included in frequencies and mode shapes, is used to get an accurate estimate of element properties. A key issue in this method is how to choose the weight factor of frequencies and mode-shapes, when minimizing the objective function. This is still an unsolved problem and will pose a big influence on the results. Hence, a 2-dof example is illustrated in the paper dealing with this issue. . From the analysis of frequencies and mode-shapes with the best weight factor, it is found that through the fine calculation, the weight factor produced by the Bayesian method fits well with the one derived with the regular one-by-one calculation. This provides a criteria to choose the weight factor directly from the experimental samples by the Bayesian approach, thus decreasing the complexity and the computing time., This work is funded by the Spanish Ministry of Economy and Competitiveness projects (BIA2013-47290-R and BIA2017-86811-C2-1-R) and China Scholarship Council (No. 201808390083). The financial support is greatly appreciated.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Dynamic observability method for durability assessment considering measurement noise

  • Peng, Tian
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
  • Turmo Coderque, José|||0000-0001-5001-2438
Due to the inevitable degradation of material properties in structures in daily use, such as stiffness degradation due to cracking in concrete elements, their durability will definitely be influenced, and their serviceability and safety could be in danger. Thus, understanding and identifying the change in the structural parameters provides new approaches to evaluate their durability. Structural system identification by dynamic observability method, which is using subsets of masses, natural frequencies and modal shapes, is a powerful tool to detect the change of structural parameters. Taking into account the presence of noise in the measurement data in real world structures, this method establishes the relative dynamic equation with the error separation items. The equation is solved by error minimization of an objective function combining the measured frequencies and mode shapes through the parameter MAC (Modal Assurance Criterion). Additionally, the algorithms and the steps are introduced based on the dynamic eigenvalue equation, which can fully demonstrate the performance of observability techniques. The present paper provides an example on how to successfully identify structural parameters. Its suitability for practical applications is demonstrated in a large frame structure. The result is a much more accurate identification of the parameters involved in the durability of the structure even in the case of noise-corrupted measurement signals., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R and BIA2017-86811-C2-1-R founded with FEDER funds and directed by Professor José Turmo and through the research project BIA2017-86811-C2-2-R. It is also to be noted that the part of this work was done included an exchange of faculty financed by the Chinese government to Mrs.Peng thorough the program (No. 201808390083).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Study of Iranian engineering educational system

  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
One of the main features of each society and civilization is the importance of educational system. All countries around the world have used specific educational planning for growing their people as well as developing the country. This paper has comprehensively evaluated civil engineering educational program in universities oflran. In the current system, tendencies of graduates are more toward education of engineers who are ready to have academic jobs but not operative jobs such as increasing and improving national production or meeting technical needs of country. One strategy that can be used in this context is having long term planning for civil engineering students, which includes increasing the budget for establishment of equipped laboratories and at the same time enhancing professional job opportunities., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R, BIA2017-86811-C2-l-R, and BIA2017-8681 l-C2-2-R founded with FEDER funds It is also to be noted that funding for this research has been provided to Mr. BEHNAM MOBARAKI by the Spanish Ministry of Economy and Competitiveness through its program for his Ph.D. It is also to be noted that part of this work was done through grant number 2018-COB-9092 from Universidad de Castilla La Mancha (UCLM).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Environmental monitoring system based on low-cost sensors

  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
Temperature and humidity measurements provide useful information on multiple areas of civil engineering application such as Structural Health Monitoring (SHM), Structural System Identification (SSI) and structures rehabilitation. Majority of the existing commercial systems are so costly and also these measurement paradigms need many reference spots for a full-scale structure. The aforesaid paradigms are based on collecting data through smart devices, transferring information to each other and in the final stage processing the obtained information collaboratively through cloud computing or the others technologies. Taking into account the above information and obstacles, utilizing the Open Source Platforms (OSP) microcontrollers like Arduino as well as low cost sensors are attracting more and more attention. This paper gives a comprehensive information about the most determinant aspects of the aforementioned kits in terms of their pros and cons, installation procedure, communication protocol, number of the required connections and specific characteristics of the data acquisition system., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R, BIA2017-86811-C2-1-R, and BIA2017-86811-C2-2-R founded with FEDER funds It is also to be noted that funding for this research has been provided to Mr. BEHNAM MOBARAKI by the Spanish Ministry of Economy and Competitiveness through its program for his Ph.D. It is also to be noted that part of this work was done through grant number 2018-COB-9092 from Universidad de Castilla La Mancha (UCLM).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Calibración de herramientas heurística para la optimización del proceso de tesado de puentes atirantados, Calibration of heurist tool parameters for the optimization of tensioning process of cablestayed bridges

  • Gisbert Doménech, Carlos Miguel
  • Lozano Galant, José Antonio
  • Payá Zaforteza, Ignacio Javier
  • Turmo Coderque, José|||0000-0001-5001-2438
El diseño y la materialización del proceso constructivo es uno de los aspectos más complicados en proyecto de los puentes atirantados. En la mayoría de las estructuras este proceso se define en base únicamente a la experiencia del proyectista sin optimizar el comportamiento estructural de ningún elemento del puente. En este artículo se propone la optimización del proceso de tesado de puentes atirantados mediante la utilización de algoritmos heurísticos. Uno de los principales inconvenientes de este tipo de herramientas es el hecho de que la solución depende, en mayor o menor medida, de los parámetros del algoritmo. Para determinar estos parámetros, tradicionalmente se realizan numerosas combinaciones aleatorias de estos parámetros. Sin embargo, y pese a su elevado coste computacional, este procedimiento no permite garantizar que se haya encontrado la combinación óptima de estos parámetros. Para solucionar este problema, el presente artículo propone la aplicación de las técnicas de diseño de experimentos para calibrar los parámetros de las herramientas de optimización heurística con un reducido coste computacional. La metodología propuesta se valida mediante la optimización del proceso de tesado de un puente atirantado., Los autores desean agradecer el apoyo proporcionado por el Ministerio de Economía y competitividad, por los proyectos de investigación BIA2013-47290-R, BIA2017-86811-C2-1-R y BIA2017-86811-C2-2-R financiados con fondos FEDER.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Industrialized construction of medium span concrete bridges using movable false work

  • Turmo Coderque, José|||0000-0001-5001-2438
Modern geometrical requirements for high capacity ground infrastructure, as highways or high-speed train lines, imply increasing numbers of long tunnels and viaducts in mountainous countries. Moreover, for the sake of the environment, only some selected construction methods are eligible for sensitive areas. Long viaducts are usually solved by means of medium span concrete viaducts. For the sake of quality and health and safety, industrialized construction methods, as launching girders or precast construction, is usually preferred. The paper will describe the pros and cons of some construction methods using movable trusses to hold in place either the formwork or precast segments, emphasizing the possibilities of reducing the critical path. New construction sequences, non-standardized structural details, static and dynamic tests, reinforcing criteria, structural response, finite element model analysis and recent already built examples will be described to illustrate the possibilities of the methods., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Models for evaluating shear strength on members with circular cross section

  • Turmo Coderque, José|||0000-0001-5001-2438
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
  • Aparicio Bengoechea, Ángel Carlos|||0000-0002-3029-9491
Solid circular columns are often used as structural supports in bridges, buildings and foundations due to their simplicity of construction and because their strength is similar in any direction. This deem them very suitable to resist wind and seismic loads. Hollow core circular concrete members are much less structurally used than solid circular cross sections. However, these can be found in concrete chimneys, concrete pipes and elevated water tanks, as well as in large bridge columns and offshore platforms. Codes do not usually propose specific formulations for evaluating the shear strength of such structural types or if they do, they do so in a very simplified manner. Hence, an analytical model for evaluating the contribution of the transverse reinforcement in concrete members of solid and hollow circular cross section is presented in this paper. After a thorough bibliographic research on the previous studies on the matter, the shortage of work accomplished on the topic has been assessed and the unsolved problems identified. A formula for evaluating the shear transferred by spiral reinforcement in solid members is presented. A formula for the calculation of hollow core circular columns with both vertical and spiral reinforcement is also deduced. Assumptions made for the calculation of this formulation have been deduced theoretically and then checked empirically. Hence, shear tests on circular hollow core specimens will be also presented.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Evaluación estructural de puentes existentes: técnicas de observabilidad

  • Lozano Galant, José Antonio
  • Nogal Macho, María
  • Jun, Lei
  • Xu, Dong
  • Turmo Coderque, José|||0000-0001-5001-2438
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
Cada vez es más importante el parque de puentes y estructuras ya construidas que es necesario mantener y evaluar su estado con el paso del tiempo, o tras haber sufrido alguna situación accidental, como puede ser un sismo. Hay diversas técnicas para ello y en esta comunicación se propone una nueva técnica de observabilidad que combina dos enfoques: uno simbólico y uno numérico. Para ilustrar el potencial de este método, se comparan los resultados obtenidos con el método propuesto con los de dos métodos alternativos presentados en la literatura.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Modelling the construction of cable stayed bridges stressed with the strand by strand technique

  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
The temporary supports erection method is the most common way of building cable-stayed bridges. In this technique the bridge deck is first built over a set of temporary and permanent supports. Then, during the tensioning process, the stays are successively placed and tensioned by the jacks and the deck is raised from the temporary supports. Several variants of this method are the launching of the bridge and the rotation method. This paper proposes an algorithm to calculate and to control the construction of such bridges when the strand by strand tensioning technique is used. It is based on the unstressed length of the stays concept. The use of such concept enables a fast and direct simulation of construction stages by analysing independent Finite Element Models. As there is no need of superposition of models it is a very convenient way for construction supervision.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Models for evaluating shear strength on members with circular cross section

  • Turmo Coderque, José
  • Ramos Schneider, Gonzalo
  • Aparicio Bengoechea, Ángel Carlos
Solid circular columns are often used as structural supports in bridges, buildings and foundations due to their simplicity of construction and because their strength is similar in any direction. This deem them very suitable to resist wind and seismic loads. Hollow core circular concrete members are much less structurally used than solid circular cross sections. However, these can be found in concrete chimneys, concrete pipes and elevated water tanks, as well as in large bridge columns and offshore platforms. Codes do not usually propose specific formulations for evaluating the shear strength of such structural types or if they do, they do so in a very simplified manner. Hence, an analytical model for evaluating the contribution of the transverse reinforcement in concrete members of solid and hollow circular cross section is presented in this paper. After a thorough bibliographic research on the previous studies on the matter, the shortage of work accomplished on the topic has been assessed and the unsolved problems identified. A formula for evaluating the shear transferred by spiral reinforcement in solid members is presented. A formula for the calculation of hollow core circular columns with both vertical and spiral reinforcement is also deduced. Assumptions made for the calculation of this formulation have been deduced theoretically and then checked empirically. Hence, shear tests on circular hollow core specimens will be also presented., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Study of Iranian engineering educational system

  • Mobaraki, Behnam
  • Komarizadehasl, Seyedmilad
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
One of the main features of each society and civilization is the importance of educational system. All countries around the world have used specific educational planning for growing their people as well as developing the country. This paper has comprehensively evaluated civil engineering educational program in universities oflran. In the current system, tendencies of graduates are more toward education of engineers who are ready to have academic jobs but not operative jobs such as increasing and improving national production or meeting technical needs of country. One strategy that can be used in this context is having long term planning for civil engineering students, which includes increasing the budget for establishment of equipped laboratories and at the same time enhancing professional job opportunities., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R, BIA2017-86811-C2-l-R, and BIA2017-8681 l-C2-2-R founded with FEDER funds It is also to be noted that funding for this research has been provided to Mr. BEHNAM MOBARAKI by the Spanish Ministry of Economy and Competitiveness through its program for his Ph.D. It is also to be noted that part of this work was done through grant number 2018-COB-9092 from Universidad de Castilla La Mancha (UCLM)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Calibración de herramientas heurística para la optimización del proceso de tesado de puentes atirantados, Calibration of heurist tool parameters for the optimization of tensioning process of cablestayed bridges

  • Gisbert Doménech, Carlos Miguel
  • Lozano Galant, José Antonio
  • Payá Zaforteza, Ignacio Javier
  • Turmo Coderque, José
El diseño y la materialización del proceso constructivo es uno de los aspectos más complicados en proyecto de los puentes atirantados. En la mayoría de las estructuras este proceso se define en base únicamente a la experiencia del proyectista sin optimizar el comportamiento estructural de ningún elemento del puente. En este artículo se propone la optimización del proceso de tesado de puentes atirantados mediante la utilización de algoritmos heurísticos. Uno de los principales inconvenientes de este tipo de herramientas es el hecho de que la solución depende, en mayor o menor medida, de los parámetros del algoritmo. Para determinar estos parámetros, tradicionalmente se realizan numerosas combinaciones aleatorias de estos parámetros. Sin embargo, y pese a su elevado coste computacional, este procedimiento no permite garantizar que se haya encontrado la combinación óptima de estos parámetros. Para solucionar este problema, el presente artículo propone la aplicación de las técnicas de diseño de experimentos para calibrar los parámetros de las herramientas de optimización heurística con un reducido coste computacional. La metodología propuesta se valida mediante la optimización del proceso de tesado de un puente atirantado., Los autores desean agradecer el apoyo proporcionado por el Ministerio de Economía y competitividad, por los proyectos de investigación BIA2013-47290-R, BIA2017-86811-C2-1-R y BIA2017-86811-C2-2-R financiados con fondos FEDER., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

The dynamic assessment of structural condition by measurement error-minimizing observability method

  • Peng, Tian
  • Casas Rius, Joan Ramon
  • Turmo Coderque, José
The structural identification using dynamic parameters (such as the natural vibration frequencies and mode shapes of the structure) is an important issue especially in slender structures such as long-span bridges or high-rise buildings. It is the most popular way to assess the structural condition along the service life . This article presents a new approach, under the framework of Structural System Identificaction by Observability Method (OM), to perform the structural system identification. The method is able of determining which actual structural properties (like Young’s modulus, area, inertia, mass) can be uniquely detected when an appropriate subset of mode-shapes and frequencies of the whole structure is provided. Error-Minimizing Observability Method (EMOM), which separates and merges the error items included in frequencies and mode shapes, is used to get an accurate estimate of element properties. A key issue in this method is how to choose the weight factor of frequencies and mode-shapes, when minimizing the objective function. This is still an unsolved problem and will pose a big influence on the results. Hence, a 2-dof example is illustrated in the paper dealing with this issue. . From the analysis of frequencies and mode-shapes with the best weight factor, it is found that through the fine calculation, the weight factor produced by the Bayesian method fits well with the one derived with the regular one-by-one calculation. This provides a criteria to choose the weight factor directly from the experimental samples by the Bayesian approach, thus decreasing the complexity and the computing time., This work is funded by the Spanish Ministry of Economy and Competitiveness projects (BIA2013-47290-R and BIA2017-86811-C2-1-R) and China Scholarship Council (No. 201808390083). The financial support is greatly appreciated., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Modelling the construction of cable stayed bridges stressed with the strand by strand technique

  • Lozano Galant, José Antonio
  • Turmo Coderque, José
The temporary supports erection method is the most common way of building cable-stayed bridges. In this technique the bridge deck is first built over a set of temporary and permanent supports. Then, during the tensioning process, the stays are successively placed and tensioned by the jacks and the deck is raised from the temporary supports. Several variants of this method are the launching of the bridge and the rotation method. This paper proposes an algorithm to calculate and to control the construction of such bridges when the strand by strand tensioning technique is used. It is based on the unstressed length of the stays concept. The use of such concept enables a fast and direct simulation of construction stages by analysing independent Finite Element Models. As there is no need of superposition of models it is a very convenient way for construction supervision., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Dynamic observability method for durability assessment considering measurement noise

  • Peng, Tian
  • Casas Rius, Joan Ramon
  • Turmo Coderque, José
Due to the inevitable degradation of material properties in structures in daily use, such as stiffness degradation due to cracking in concrete elements, their durability will definitely be influenced, and their serviceability and safety could be in danger. Thus, understanding and identifying the change in the structural parameters provides new approaches to evaluate their durability. Structural system identification by dynamic observability method, which is using subsets of masses, natural frequencies and modal shapes, is a powerful tool to detect the change of structural parameters. Taking into account the presence of noise in the measurement data in real world structures, this method establishes the relative dynamic equation with the error separation items. The equation is solved by error minimization of an objective function combining the measured frequencies and mode shapes through the parameter MAC (Modal Assurance Criterion). Additionally, the algorithms and the steps are introduced based on the dynamic eigenvalue equation, which can fully demonstrate the performance of observability techniques. The present paper provides an example on how to successfully identify structural parameters. Its suitability for practical applications is demonstrated in a large frame structure. The result is a much more accurate identification of the parameters involved in the durability of the structure even in the case of noise-corrupted measurement signals., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R and BIA2017-86811-C2-1-R founded with FEDER funds and directed by Professor José Turmo and through the research project BIA2017-86811-C2-2-R. It is also to be noted that the part of this work was done included an exchange of faculty financed by the Chinese government to Mrs.Peng thorough the program (No. 201808390083)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Environmental monitoring system based on low-cost sensors

  • Mobaraki, Behnam
  • Komarizadehasl, Seyedmilad
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
Temperature and humidity measurements provide useful information on multiple areas of civil engineering application such as Structural Health Monitoring (SHM), Structural System Identification (SSI) and structures rehabilitation. Majority of the existing commercial systems are so costly and also these measurement paradigms need many reference spots for a full-scale structure. The aforesaid paradigms are based on collecting data through smart devices, transferring information to each other and in the final stage processing the obtained information collaboratively through cloud computing or the others technologies. Taking into account the above information and obstacles, utilizing the Open Source Platforms (OSP) microcontrollers like Arduino as well as low cost sensors are attracting more and more attention. This paper gives a comprehensive information about the most determinant aspects of the aforementioned kits in terms of their pros and cons, installation procedure, communication protocol, number of the required connections and specific characteristics of the data acquisition system., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R, BIA2017-86811-C2-1-R, and BIA2017-86811-C2-2-R founded with FEDER funds It is also to be noted that funding for this research has been provided to Mr. BEHNAM MOBARAKI by the Spanish Ministry of Economy and Competitiveness through its program for his Ph.D. It is also to be noted that part of this work was done through grant number 2018-COB-9092 from Universidad de Castilla La Mancha (UCLM)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Evaluación estructural de puentes existentes: técnicas de observabilidad

  • Lozano Galant, José Antonio
  • Nogal Macho, María
  • Jun, Lei
  • Xu, Dong
  • Turmo Coderque, José
  • Ramos Schneider, Gonzalo
Cada vez es más importante el parque de puentes y estructuras ya construidas que es necesario mantener y evaluar su estado con el paso del tiempo, o tras haber sufrido alguna situación accidental, como puede ser un sismo. Hay diversas técnicas para ello y en esta comunicación se propone una nueva técnica de observabilidad que combina dos enfoques: uno simbólico y uno numérico. Para ilustrar el potencial de este método, se comparan los resultados obtenidos con el método propuesto con los de dos métodos alternativos presentados en la literatura., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Industrialized construction of medium span concrete bridges using movable false work

  • Turmo Coderque, José
Modern geometrical requirements for high capacity ground infrastructure, as highways or high-speed train lines, imply increasing numbers of long tunnels and viaducts in mountainous countries. Moreover, for the sake of the environment, only some selected construction methods are eligible for sensitive areas. Long viaducts are usually solved by means of medium span concrete viaducts. For the sake of quality and health and safety, industrialized construction methods, as launching girders or precast construction, is usually preferred. The paper will describe the pros and cons of some construction methods using movable trusses to hold in place either the formwork or precast segments, emphasizing the possibilities of reducing the critical path. New construction sequences, non-standardized structural details, static and dynamic tests, reinforcing criteria, structural response, finite element model analysis and recent already built examples will be described to illustrate the possibilities of the methods., Peer Reviewed, Postprint (published version)