Skip to main content

INESTABILIDAD HIDROMECANICA EN SUELOS: DETECCION Y EVALUACION

BIA2017-84752-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

G-PFEM numerical assessment of screw pile undrained capacity

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
This contribution describes a preliminary parametric analysis of the factors affecting the pull-out resistance of screw-piles in undrained conditions. The numerical simulations rely on the Particle Finite Element method, a method known for its capabilities to tackle large deformations and rapid changing boundaries at large strains. A total stress analysis-assuming a quasi-incompressible elastic model along with a Tresca plastic model-is used to simulate the clayey soil behavior. Contact constraints are imposed to the solution with a penalty approach. As a first step, a two-dimensional geometry is used and the pile resistance to pullout and penetration is assessed.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

G-PFEM: an open access numerical tool for the simulation of spudcan penetration in clays, G-PFEM: un outil numérique en libre accès pour la simulation de la pénétration de spudcan dans les argiles

  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Dilberoglu, Emre
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
Penetration depth of Spudcan foundations for offshore mobile Jack-up rigs is typically predicted by considering a wished-in-place foundation at different depths and following traditional bearing capacity approaches. However, the large penetration depths involved, stress redistributions and the flow of the material around the spudcan are some example of features which make the wished-in-place assumption quite unrealistic. This paper presents an open access application package developed to simulate and hence predict load penetration curves of spudcan installation in multi-layered clay profiles. The numerical tool adopts the recently developed particle finite element method for geotechnical applications (G-PFEM). The potential of this large strain particle finite element application is demonstrated by simulating field data from the literature. The results show that load-penetration curves obtained using G-PFEM capture more efficiently the field results with respect to other numerical and analytical methods. It is also shown how the G-PFEM automatically captures cavity infill. In the paper the computational cost for the simulation of penetration up to 40m on a standard desktop are shown to be low compared to other commercial software., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Static & dynamic probing of rough breakable sands, Sondage statique et dynamique des sables cassants rugueux

  • Zhang, Ningning
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
Both static and dynamic penetration tests are widely used to conduct soil investigation practice. Particle crushability has been known to greatly affect the responses of penetration tests. On the other hand, the physical property of granular materials – surface roughness – exhibits considerable influence on crushability. The virtual calibration chamber (VCC) technique, based on the Discrete Element Method (DEM), is used to investigate the effect of particle crushability and roughness on both static and dynamic penetration test responses. In static tests particle crushing reduces tip resistance, and roughness enhances this effect as rough particles crush more than smooth ones. The main effects of roughness and crushability on dynamic responses lie in the track of dynamic penetrograms. The analysis confirms a good correlation between an equivalent dynamic resistance and the static tip resistance., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A new approach to evaluate the soil disturbance due to tube sampling, Une nouvelle approche pour évaluer les effets d’altération dues à l'échantillonnage

  • Gens Solé, Antonio|||0000-0001-7588-7054
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
Disturbance of specimens recovered by tube sampling from boreholes is an enduring relevant problem in geotechnical engineering. Practice has evolved slowly in this area, partly because the main research method applied, involving comparative field sampling and testing, remains strictly empirical. Theoretical approaches based on the strain path method (SPM) have been applied, that idealize the problem as one of steady ideal fluid motion, which is an unrealistic premise. A novel numerical technology, the Particle Finite Element method, is here applied to simulate smooth tube sampling using a conventional elasto-plastic Tresca model for the undrained soil. The results obtained are used to quantify the qualitative insight gained by field experimentation. It is shown that sample straining is proportional to the tube area ratio. The coefficient of proportionality is named here as the Hvorslev fraction. It is shown that the Hvorslev fraction is dependent on end-tube bevel and on the presence of a stationary piston. Furthermore, it is also shown that the contribution of these two features is independent of one another. The approach described represents an advance towards a soil mechanics-based rational approach to soil sampling., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A new approach to evaluate the soil disturbance due to tube sampling, Une nouvelle approche pour évaluer les effets d’altération dues à l'échantillonnage

  • Gens Solé, Antonio
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Carbonell Puigbó, Josep Maria
Disturbance of specimens recovered by tube sampling from boreholes is an enduring relevant problem in geotechnical engineering. Practice has evolved slowly in this area, partly because the main research method applied, involving comparative field sampling and testing, remains strictly empirical. Theoretical approaches based on the strain path method (SPM) have been applied, that idealize the problem as one of steady ideal fluid motion, which is an unrealistic premise. A novel numerical technology, the Particle Finite Element method, is here applied to simulate smooth tube sampling using a conventional elasto-plastic Tresca model for the undrained soil. The results obtained are used to quantify the qualitative insight gained by field experimentation. It is shown that sample straining is proportional to the tube area ratio. The coefficient of proportionality is named here as the Hvorslev fraction. It is shown that the Hvorslev fraction is dependent on end-tube bevel and on the presence of a stationary piston. Furthermore, it is also shown that the contribution of these two features is independent of one another. The approach described represents an advance towards a soil mechanics-based rational approach to soil sampling., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

G-PFEM numerical assessment of screw pile undrained capacity

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
  • Ciantia, Matteo Oryem
This contribution describes a preliminary parametric analysis of the factors affecting the pull-out resistance of screw-piles in undrained conditions. The numerical simulations rely on the Particle Finite Element method, a method known for its capabilities to tackle large deformations and rapid changing boundaries at large strains. A total stress analysis-assuming a quasi-incompressible elastic model along with a Tresca plastic model-is used to simulate the clayey soil behavior. Contact constraints are imposed to the solution with a penalty approach. As a first step, a two-dimensional geometry is used and the pile resistance to pullout and penetration is assessed., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

G-PFEM: an open access numerical tool for the simulation of spudcan penetration in clays, G-PFEM: un outil numérique en libre accès pour la simulation de la pénétration de spudcan dans les argiles

  • Ciantia, Matteo Oryem
  • Dilberoglu, Emre
  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
  • Carbonell Puigbó, Josep Maria
Penetration depth of Spudcan foundations for offshore mobile Jack-up rigs is typically predicted by considering a wished-in-place foundation at different depths and following traditional bearing capacity approaches. However, the large penetration depths involved, stress redistributions and the flow of the material around the spudcan are some example of features which make the wished-in-place assumption quite unrealistic. This paper presents an open access application package developed to simulate and hence predict load penetration curves of spudcan installation in multi-layered clay profiles. The numerical tool adopts the recently developed particle finite element method for geotechnical applications (G-PFEM). The potential of this large strain particle finite element application is demonstrated by simulating field data from the literature. The results show that load-penetration curves obtained using G-PFEM capture more efficiently the field results with respect to other numerical and analytical methods. It is also shown how the G-PFEM automatically captures cavity infill. In the paper the computational cost for the simulation of penetration up to 40m on a standard desktop are shown to be low compared to other commercial software., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Static & dynamic probing of rough breakable sands, Sondage statique et dynamique des sables cassants rugueux

  • Zhang, Ningning
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
  • Ciantia, Matteo Oryem
Both static and dynamic penetration tests are widely used to conduct soil investigation practice. Particle crushability has been known to greatly affect the responses of penetration tests. On the other hand, the physical property of granular materials – surface roughness – exhibits considerable influence on crushability. The virtual calibration chamber (VCC) technique, based on the Discrete Element Method (DEM), is used to investigate the effect of particle crushability and roughness on both static and dynamic penetration test responses. In static tests particle crushing reduces tip resistance, and roughness enhances this effect as rough particles crush more than smooth ones. The main effects of roughness and crushability on dynamic responses lie in the track of dynamic penetrograms. The analysis confirms a good correlation between an equivalent dynamic resistance and the static tip resistance., This work has been supported by the Ministry of Science and Innovation of Spain through research grant BIA2017-84752-R. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa Program for Centers of Excellence in R&D’ (CEX2018-000797-S)., Postprint (published version)