Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Diagenetic History of the Vilobí Gypsum Unit (Vallès - Penedès Basin, Miocene, Ne Spain): An Example of Fractured and Cemented Evaporite Deposit

  • Playà, E.
  • Moragas, Mar
  • Martínez Rodríguez, Cristina
  • Baqués, Vinyet
  • Travé, A.
  • Ortí, F.
  • Alías, G.
Paratethys ¿ Mediterranean Interactions, Regional Commission Mediterranean Neogene Stratigraphy meeting, Bucharest, Romania . 27-30 sep. 2012, The evaporitic deposit of Vilobí (Barcelona province, NE Spain) shows petrological, sedimentological and diagenetic features of interest. The Vilobí Gypsum Unit is located in the Vallès-Penedès half-graben, which is located in the Catalan Coastal Ranges (NE Spain). The Catalan Coastal Ranges are mainly constituted by a NESW oriented horst and graben system developed during the Neogene extension. The thickness of the Neogene sediment fill of the Vallès-Penedès basin reaches up to 4000 m. As a consequence of the rifting stage, several transgressive pulses in the Upper Burdigalian and in the Langhian led to a partial flooding of the western part (Penedès) of the basin. The marine episode was finished by the end of Lower Serravallian time. The basin exhibits a heterogeneous sediment fill with non-marine clastics, marine deposits including reefs buildups and sabkhasalina gypsum sediments., This research was supported by the Spanish Government Projects CGL2009-11096 and CGL2010-18260, and the “Grup consolidat de Recerca Geologia Sedimentària” 2009SGR-1451.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Gypsum cement microstructures in fractures related with extensional event (Vilobí gypsum unit, Vallès - Penedès Basin, Miocene, NE Spain)

  • Moragas, Mar
  • Martínez Rodríguez, Cristina
  • Baqués, Vinyet
  • Alías, G.
  • Playà, E.
Deformation mechanisms, Rheology and Tectonics 2011, 31 agosto- 2 septiembre 2011, Oviedo, Microstructural studies focused on gypsum cements precipitated along faults within evaporite host bodies are scarce. This is the main focus of this work, which has made it necessary to use concepts that are not typically applied to evaporite rocks and cements. The Vilobí Gypsum Unit (Upper Burdigalian) is located in the Penedès half-graben, NE Iberian Peninsula. The half-graben is limited by ENE¿WSW normal faults formed during the Neogene rifting stage of west Mediterranean area. The Vilobí unit consists of a succession up to 60 m thick of laminated to banded secondary (coming from anhydrite hydration) and primary gypsum that has been affected by two main deformation events: a ductile deformation represented by folds, millimetres to decimetres in size, which were produced during the early diagenesis, and a fragile deformation event related with the Neogene rifting. The later event affected the evaporite unit resulting in five sets of fractures of different time formation according to the cross-cutting relation (arranged chronologically from oldest to youngest): - Set 1 (S1) consists of NE-SW trending extensional faults. - Set 2 (S2) comprises a normal faults system with ENE-WSW trending. - Set 3 (S3) formed by subvertical NW-dipping joints. - Set 4 (S4) represented by NE-SW to ENE-WSW trending thrust faults. - Set 5 (S5) comprises a SE-dipping system joints. All fractures are refilled by gypsum cements with a large variety of deformation textures. It has been possible to observe direct relationship between main structures and microscopically observations of deformed samples. It could be established 4 stages of fracturing which reaffirm the chronology of precipitation and deformation defined at the outcrop scale. - 1st Stage: Extensive context with active normal faults (S1 and S2). Antitaxial growths of fibrous gypsum cement indicating a shear sense in agreement with normal displacement, and incorporation of host-gypsum fragments and fish type crystals in shear zone. - 2nd Stage: Tectonically stable stage with dilatation veins (S3) formation and precipitation of millimetre gypsum crystals. - 3rd Stage: Compressive stage determined by outcrop indicators (S4), which represents reactivation of S1 and S2 faults. In that stage appear broken gypsum fibres and small gypsum fragments around irregular boundary of millimetre gypsum crystals. - 4th Stage: Karstic regime in a relatively stable tectonic stage (S5). Megacrystalline gypsum cements precipitation with crystals up to 25 cm in size. These crystals show some indicators of small extensive stages as small oriented crystals (recrystallized) fragments in crystal boundaries, suggesting gentle tectonic reactivation events. Minor deformations such as internal crystalline dislocations, grain contact and internal recrystallizations occur in millimetre gypsum crystals and megacrystalline cement. Sulphur and oxygen isotope values indicate that gypsum cements were produced by sulphatesrich fluids which flow through the fragile structures after an interaction with host-gypsum rock. Consequently, it is significant that antitaxial growth of gypsum fibres in veins occurs in a host-rock with the same lithology, because this type of growth is common where the vein fill is different from the composition host-rock., The present work was supported by the Spanish Government projects CGL2010-18260 and CGL2009-11096 and by grup Consolidat de Recerca "Geologia Sedimentaria" (2009 SGR-1458)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fracturing and Cementation in the Miocene Vilobí Gypsum Unit (Penedès Half-Graben, Ne Spain).

  • Martínez Rodríguez, Cristina
  • Baqués, Vinyet
  • Playà, E.
  • Moragas, Mar
  • Travé, A.
28th IAS meeting of Sedimentology, 5-8/7 2011 ,Zaragoza, Spain, The Vilobí Gypsum Unit (upper Burdigalian) is located in the Penedès half-graben (northeast of the Iberian Peninsula). This unit consists of a succession up to 60 m of primary (limited to the top interval) and secondary (the predominant form) gypsum with both laminated and banded facies. This succession was formed in a gypsiferous coastal salina that periodically underwent emersion episodes. During these episodes, early diagenetic anhydrite (both nodular-banded facies and enterolithic levels interbedded within the gypsum) formed in a sabkha setting. This succession has been affected by both ductile (folds and microfolds) and brittle (faults and joints) deformations. Structures of ductile deformation are interpreted to have been caused by syn-sedimentary deformation, whereas those of brittle deformation are related to Neogene extensional stages recorded in the region. Brittle structures are partly or totally cemented by fibrous and/or crystalline (tabular, megacrystalline) gypsum. A number of families of fragile structures have been distinguished: -Family 1 are NE-SW trending extensional faults infilled with fibrous gypsum growing perpendiculary or sigmoidally to fracture plane (growing syn-tectonically), tabular crystalline cement and megacrystalline gypsum (totally infilling the dissolution-enlarged fault planes). -Family 2 are ENE-WSW trending normal faults with the same infillings as Family 1. -Family 3 are NE-SW to ENE-WSW trending thrust faults with fibrous gypsum cement. -Family 4 are sub-parallel joints located on the upper block (hanging wall) of the local faults. These joints are totally cemented by crystalline cement; exfoliation planes of the crystals are perpendicular to joint aperture. -Family 5 and Family 6 correspond to joints forming an orthogonal system; typically the planes are dissolved and enlarged and the cements of these structures are different from those associated with Family 4, with bigger crystals (megacrystals up to 25 cm). The gypsum rocks of the Vilobí Unit display isotope compositions between +17.8 and +22.3¿ for sulphur, and from +12.4 to +18.6¿ for oxygen, while the cements are heavier, from +21.8 to +25.1¿ and from +14.3 to +19.2 for sulphur and oxygen, respectively. Additionally, isotope signals of the infillings show an increasing trend from the youngest cements (fibrous gypsum) to the latest ones (megacrystals). These data suggest chemical recycling processes of the previous sulphates, both the host-gypsum rocks and the youngest cements. The conjugate extensional faults (Family 1 and 2) were formed during the latest stages of the major rifting episode (lower to middle Langhian). Family 4 is attributed to an early post-rift event (middle to upper Langhian), while Family 3 is related to the upper Langhian-lower Serravallian minor compressive stage (with reactivation of the pre-existing extensive faults and deformation and reorientation of the initial fibrous cement). Family 5 and 6 were formed during a late post-rift event (probably upper Serravallian-Messinian)., Financial support by I+D+I research projects CGL2010-18260, CGL2009-11096 and Grup Consolidat deRecerca “Geologia Sedimentària” (2009 SGR-1458).