Skip to main content

REPRODUCCION DIGITAL AVANZADA DE LA GONIOAPARIENCIA VISUAL DE OBJETOS

DPI2015-65814-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Caracterización colorimétrica de muestras fluorescentes con un espectrofluorímetro modular con irradiación/emisión direccional

  • Chorro, Elizabet
  • Perales, Esther,
  • Micó-Vincent, Bárbara
  • Viqueira, V.
  • Gómez, Omar
  • Martínez-Verdú, F. M.
  • Ferrero, Alejandro
  • Campos Acosta, Joaquín
Color 2016, Campus de As Lagoas, Ourense, 19-22 Julio, 2016, La caracterización colorimétrica de diferentes materiales es un objetivo prioritario en muchos sectores, tanto de investigación como industriales. Cuando estos materiales muestran características especiales, como los materiales gonioaparentes, o aquellos que presentan cierta textura, las técnicas de caracterización colorimétrica empiezan a revestir cierta dificultad, puesto que el control sobre el ángulo de iluminación y observación es determinante para dicha caracterización. En particular, con los colores fluorescentes hay una dificultad añadida, puesto que la complicación radica en el hecho de que estos materiales no sólo reflejan parte de la luz que les llega, sino que además emiten radiación en longitudes de onda diferentes a las que han sido irradiadas. Por ello, no sólo entra en juego la geometría de la iluminación/observación, sino que además es especialmente importante controlar la longitud de onda UV-VIS con la que se ilumina y observa dicha muestra. Aunque en la actualidad hay diferentes instrumentos que son capaces de medir la fluorescencia, y en términos relativos para numerosas aplicaciones, no es habitual encontrarlos bien caracterizados y calibrados para colorimetría pese a existir normativas específicas relativa a estas medidas especiales tanto por parte de la CIE [1], como por parte de organismos de estandarización como ASTM [2, 3]. Se describe aquí cómo se usó un espectrofluorímetro modular adquirido por el Grupo de Visión y Color de la Universidad de Alicante para la caracterización colorimétrica de materiales fluorescentes., Al MINECO por la concesión de los proyectos DPI2011-30090-C02 y DPI2015-65814, y la beca FPI BES-2012-053080. Al EMRP por el proyecto europeo JRP-i21 (REG2 – IND52)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Spectral and Color Characterization of a Quantum Dots Display

  • Huraibat, Khalil
  • Preales, Esther
  • Kirchner, Eric
  • Van der Lans, I.
  • Ferrero, Alejandro
  • Campos Acosta, Joaquín
  • Martínez-Verdú, F.M.
13th AIC (Association Internationale de la Couleur) International Congress, Jeju Island of Korea from 16th to 20th of October, 2017. -- http://www.aic2017.org/, Digital simulation by rendering gonio-apparent objects it becomes a necessity due to the huge impact is giving day by day in different industries. However, in a recent publication, the limitations of a conventional LCD display for this goal was shown, since many visual attributes of goniochromatic coatings fall outside the colorgamut of this type of electronic display. Consequently, gamut-mapping algorithms, new extended RGB color spaces and/or multi-primaries displays are necessary to reproduce faithfully the colorimetric properties of these materials. Recently, quantum dots (QD) displays appeared in the market with attractive characteristics. QD are semiconductor nanocrystals that provide lifelike colors in an energy-efficient way. Thus, a wide color gamut is achieved. Therefore, a proper color characterization and calibration of this type of displays is needed. For this study, a spectral and color characterization of a QD display is performed. For this purpose, the spectral radiance of a set of images was displayed on a QD display and measured by a tele-spectroradiometer. As results, a good chromaticity constancy of primaries was obtained after black correction is applied. It was checked that this display satisfies channel additivity and the electro-optical transfer function for the three channels can be modelled as a power function. The GOG model was found to well characterize this display. Color reproduction was evaluated in terms of CIEDE2000. The computed CIELAB values of a set of images differ from their objects¿ coordinates by an average value of ¿¿00 = 1.07. Therefore, we conclude that the accuracy obtained with the GOG model is sufficient to get good performance in 3D rendering. On another hand, the spatial uniformity of the display is checked. The display shows poor spatial uniformity in terms of luminance, while the uniformity considering chromatic values shows much better results., We would like to thank the Ministry of Economy and Competitiveness for the project DPI2015-65814-R. Khalil Huraibat would also like to thank the Ministry of Economy and Competitiveness for his pre-doctoral fellowship grant (FPI BES-2016-077325), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Byko-Spectra effect light booth simulation for digital rendering tool

  • Huraibat, Khalil
  • Perales, Esther
  • Viqueira, V.
  • Kirchner, Eric
  • Van der Lans, I.
  • Ferrero, Alejandro
  • Campos Acosta, Joaquín
XII Congreso Nacional del Color, Linares, 25 al 27 de septiembre de 2019. -- https://www.baobabeventos.com/xiicnc, Therefore, the aim of this work is to build a complete rendered simulation of the Byko-spectra effect lightbooth. This simulated light booth will be used in the next phase of this work, to support psychophysical visual experiments on the rendering of virtual objects inside the virtual lightbooth and real samples inside the physical lightbooth to improve the visualization of 3D objects covered by effect coatings., We would like to thank the Ministry of Economy and Competitiveness for the project DPI2015-65814-R. Khalil Huraibat would also like to thank the Ministry of Economy and Competitiveness for his pre-doctoral fellowship grant (FPI BES- 2016-077325). Part of the authors (those from Universidad de Alicante and Consejo Superior de Investigaciones Científicas) works within the EMPIR 16NRM08 Project “Bidirectional reflectance definitions” (BiRD). The EMPIR is jointly funded by the EMPIR participating countries within EURAMET and the European Union.