Skip to main content

ESTIMACION, DIAGNOSIS Y CONTROL PARA LA MEJORA DE LA EFICIENCIA Y LA VIDA UTIL DE LAS PILAS DE COMBUSTIBLE DE TIPO PEM

DPI2015-69286-C3-2-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 49
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Módulo didáctico para la realización de experiencias de control no lineal

  • Lampón Diestre, Cristina
  • Costa-Castelló, R.
  • Dormido-Canto, Sebastián
[Resumen] En este trabajo se presenta un modelo analógico que puede ser utilizado para la realización de prácticas experimentales de control no lineal. El módulo permite incorporar no linealidades estáticas a sistemas ya existentes. El trabajo presenta la estructura, los componentes y un ejemplo de uso de este dispositivo., Este trabajo ha sido parcialmente financiado por los proyectos DPI2012-31303 y DPI2015-69286-C3-2-R (MINECO/FEDER) a y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014 SGR 267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

MPC como estrategia de gestión energética para un vehículo híbrido eléctrico

  • Carignano, Mauro Guido
  • Feroldi, Diego
  • Nigro, Norberto
  • Costa-Castelló, R.
[Resumen] En este trabajo se presenta la formulación y aplicación de una estrategia de gestión energética (EMS) para un vehículo eléctrico (HEV) basada en Control Predictivo (MPC). Específicamente, se presenta una formulación no lineal variante en el tiempo. El problema de optimización en el horizonte de predicción se resuelve utilizando programación dinámica. Los resultados obtenidos son comparados con las estrategias de gestión más reconocidas en la literatura, incluyendo la solución óptima. Los resultados en términos del consumo de combustible y del uso de la batería no muestran ninguna ventaja con implementación de MPC., Este trabajo ha sido parcialmente financiado por los proyectos DPI2015-69286-C3-2-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (Agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014-SGR-267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Una estrategia de control mediante observadores para la temperatura en edificio de oficinas

  • Mascaró Palliser, Rubén
  • Costa-Castelló, R.
  • Álvarez, José Domingo
[Resumen] En este trabajo se presenta un modelo térmico de una habitación basado en primeros principios junto con el modelo térmico de las paredes que la conforman. Ambos modelos permiten formular el modelo parametrizable de un edificio con independencia del número de habitaciones que tenga. Además, se presentan resultados utilizando el modelo de un sistema de control basado en realimentación de estados que ha sido diseñado tomando como referencia las técnicas de control LQR. El sistema de control utiliza un observador basado en un filtro de Kalman que permita estimar la temperatura de todas las paredes del edificio, de esta manera, una futura implementación del sistema de control en un edificio real permitiría un ahorro considerable en lo tocante a la red de sensores que éste necesitaría para su funcionamiento., Este trabajado ha sido parcialmente financiado con las becas de colaboración del MEC, los proyectos DPI2015-69286-C3-2-R, DPI2014-56364-C2-1-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya). José Domingo Álvarez Hervás pertenece al programa del MEC `Ramón y Cajal' cofinanciado por la fundación social Europea, Generalitat de Catalunya; 2014-SGR-267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Prácticas experimentales de control digital con elementos de bajo coste

  • Izquierdo Borràs, Adolf
  • Costa-Castelló, R.
[Resumen] En este trabajo se presenta un entorno de bajo coste, compuesto por una placa Arduino y un circuito analógico, para su uso en prácticas de control digital. Se describe el entorno completo (tanto software como hardware), unas prácticas propuestos y se muestran algunos resultados experimentales., Este trabajo ha sido parcialmente financiado por el proyecto DPI2015-69286-C3-2-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014-SGR-267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Librería Java para análisis y simulación de sistemas lineales

  • Blanch Costa, Jordi
  • Costa-Castelló, R.
[Resumen] Este proyecto presenta el diseño, implementación y algunos ejemplos de uso de una librería JAVA pensada para el análisis y simulación de sistemas lineales. Se ha diseñado pensando en que sea fácilmente integrable con Easy Java Simulations. El uso combinado de ambas herramientas facilita el desarrollo de laboratorios virtuales y remotos., Este trabajo ha sido parcialmente financiado por el proyecto DPI2015-69286-C3-2-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014 SGR 267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Control adaptativo por modelo de referencia para un inversor basado en LCL con síntesis de controlador mínima

  • Larco Barros, Ciro
  • Costa-Castelló, R.
  • Olm, Josep M.
[Resumen] Un Control Adaptativo por Modelo de Referencia (MRAC) con Síntesis de Controlador Mínima (MCS), es desarrollado con el objetivo de controlar un Inversor monofásico basado en un Filtro LCL conectado a la Red Eléctrica y adaptar el inductor de la red, que es un parámetro desconocido y que genera incertidumbre, manteniendo las prestaciones y la robustez del sistema. Para ello primero se revisara el algoritmo de MCS y en función de este, se muestran todos los pasos a seguir y el desarrollo de los componentes necesarios para el funcionamiento de MCS en tiempo continuo. Se desarrolla un modelo de simulación promediado y se presentan los resultados obtenidos., Este trabajo ha sido realizado gracias al apoyo de la Secretaría Nacional de Educación Superior, Ciencia y Tecnología e Innovación del Ecuador (SENESCYT), a la Universidad de Cuenca, y a los proyectos DPI2013-41224-P y DPI2015-69286-C3-2-R (MINECO/FEDER) y 2014 SGR 267 de la agencia AGAUR de la Generalitat de Catalunya, Generalitat de Catalunya; 2014 SGR 267, https://doi.org/10.17979/spudc.9788497498081
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Observation of the electrochemically active surface area in a proton exchange membrane fuel cell

  • Luna, Julio
  • Usai, Elio
  • Husar, Attila
  • Serra-Prat, María
Trabajo presentado a la 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON), celebrada en Florencia (Italia) del 23 al 26 de octubre de 2016., In this paper a methodology for the estimation of the Electrochemically active Surface Area (ECSA) of a Proton Exchange Membrane Fuel Cell (PEMFC) is developed. Specifically, the ECSA in the Cathode Catalyst Layer (CCL) is estimated, which makes it possible to quantify the amount of active platinum (Pt) in the CCL. In order to estimate the ECSA, the internal conditions of the PEMFC have to be known. A model-based observer for the distributed parameter dynamics is designed. From the observation of the distributed states, the ECSA can be estimated as well. With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the CCL. The results of the methodology are discussed in a simulation environment using the New European Driving Cycle (NEDC) as a case study., This work has been partially funded by the MINECO/FEDER project DPI2015-69286-C3-2-R, the Regione Autonoma della Sardegna project CRP-7733 and the European project PUMA-MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Temperature control of open-cathode PEM fuel cells

  • Strahl, Stephan
  • Costa Castelló, Ramon
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., Proper temperature control of Proton Exchange Membrane (PEM) Fuel Cells is a crucial factor for optimizing fuel cell performance. A robust temperature controller is required for optimal water management of PEM fuel cells. This paper describes a model-based characterization of the equilibrium points of an open-cathode fuel cell system as the baseline for proper controller design, highlighting the relation between fuel cell temperature, humidification and performance. Phase plane analysis of the nonlinear model versus a linearized model around different points of operation shows the potential of approximating the nonlinear system behavior with a linear model. The methodology for the system analysis presented in this paper finally serves for the development of control schemes using robust control techniques. The designed controller is validated in simulation with the nonlinear plant model., This work has been supported by the project DPI2015-69286-C3-2-R of the Spanish Ministerio de Educacion de España and 2014 SGR 267 of the AGAUR agency of the Generalitat de Catalunya., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Different architectures to develop repetitive controllers

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • Ramos, German A.
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., In this work several architectures to implement repetitive controllers are compared. A complete analytical analysis is performed for these dierent architectures and a simulation example with a power converter is included., This work was partially supported by the spanish Ministerio de Educacion project DPI2015-69286-C3-2-R (MINECO/FEDER) and the catalan AGAUR project 2014 SGR 267., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Modeling and control of HTPEMFC based combined heat and power for confort control

  • Martínez Molina, Pau
  • Serra-Prat, María
  • Costa Castelló, Ramon
Trabajo presentado a la 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), celebrada en Limassol (Chipre) del 12 al 15 de septiembre de 2017., In this work the dynamic model of a domestic heating system is described. The heating system is based on a High Temperature PEM Fuel Cell. The model corresponds to a home placed in the city of Barcelona. The set of equations describing its behavior, the implementation in MATLAB/Simulink and some preliminary results for the control system are described., This work was partially supported by the spanish Ministerio de Educacion project DPI2015-69286-C3-2-R (MINECO/FEDER) and the catalan AGAUR project 2014 SGR 267., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Observación de la fracción de agua líquida en pilas de combustible tipo PEM de cátodo abierto

  • Luna, Julio
  • Costa Castelló, Ramon
Trabajo presentado a las XXXVIII Jornadas de Automática (JJAA), celebradas en Gijón del 6 al 8 de septiembre de 2017., En este trabajo se diseña un observador no-lineal basado en modos deslizantes para la estimación de la fracción de agua líquida en una pila de combustible tipo PEM de cátodo abierto. La pila de combustible se modela con dos estados dinámicos: la temperatura de la pila y la saturación de agua líquida. La estrategia de observación se valida en simulación mediante un ciclo de conducción ARTEMIS., Este trabajo ha sido parcialmente financiado por los proyectos MINECO/FEDER DPI2015-69286-C3-2-R y INN-BALANCE H2020-JTI-FCH-2016-1-735969., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Combined heat and power using high temperature proton exchange membrane fuel cells for comfort applications

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • Batlle, Carles
Trabajo presentado al XV Simposio CEA de Ingeniería de Control: "Control total de planta / Plant-Wide Control", celebrado en Salamanca del 9 al 10 de febrero de 2017., Global concerns about nowadays' energy shortage problems as well as climate change eects have encouraged alternatives to classical energy sources such as fossil fuels and nuclear power plants. In this context, combined heat and power is presented as a useful option due to its ability of generating both electrical and thermal energy more eciently than conventional methods. Regarding this, high temperature proton exchange membrane fuel cells are not only a reliable way of implementing combined heat and power systems, but also a better solution in terms of energy conversion eciency and greenhouse gases emissions reduction. Therefore, high temperature proton exchange membrane fuel cells are being installed around the world and policies encouraging its utilisation are being promoted., This work has been supported by the project DPI2015-69286-C3-2-R of the Spanish Ministerio de Educacion de España and 2014 SGR 267 of the AGAUR agency of the Generalitat de Catalunya., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Experimental thermal model of a high temperature fuel cell stack

  • Serri, Flavia
  • Serra-Prat, María
  • Costa Castelló, Ramon
Trabajo presentado al 6th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries (Hyceltec), celebrado en Oporto (Portugal) del 19 al 23 de junio de 2017., HT- PEM fuel cells (operating termperature >100°C), in comparison to PEM fuel cells: have better reaction kinetics; have higher CO tolerance; do not present problems with liquid water formation; and can be used as a CH&P generator. The main objective of this work is to obtain a thermal model of a HT-PEMFC based on experimental data. The model is aimed at the design of temperature controllers. Second order transfer functions have shown to achieve fittings to the experimental data greater than 87% both for closed and open heat management openings., This work acknowledges the Spanish project with reference DPI2015-69286-C3-2-R, MINECO/FEDER., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Hierarchical and cooperative model predictive control of electrical grids by using overlapping information

  • Sanz i López, Víctor
  • Namerikawa, Toru
Trabajo presentado a la Conference on Control Technology and Applications, celebrada en Hawai (US) del 27 al 30 de agosto de 2017., The presented study deals with hierarchical and cooperative model predictive control (MPC) of electrical grids. The aim of this study is minimizing electrical frequency deviation while ensuring power levels do not rise too much. The original system is a simply interconnected one divided in several areas and, in order to control eventually disconnected areas due to communication blackouts, an expansion of the original system to a hierarchical version of itself by overlapping original system¿s areas., This work was supported by the partnership between Keio University and UPC-ETSEIB. This work has been supported by the project DPI2015-69286-C3-2-R of the Spanish Ministerio de Educacion de España and 2014 SGR 267 of the AGAUR agency of the Generalitat de Catalunya., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reset control of boost converters

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
  • Baños, Alfonso
Trabajo presentado en la Annual American Control Conference (ACC), celebrada en Milwaukee (WI, USA), del 27 al 29 de junio de 2018, The goal of this work is to apply the framework of reset systems, in particular PI+CI controllers, in the controller design for power converters. While the PI+CI controller has been applied in several industrial applications, the application of such controllers in fast electrical systems especially power electronic converters appears to be new. The main motivations for this proposal are performance superiority of these controllers and the ability to produce a fast flat response without any overshoot for a step input. Another factor that influenced the use of such controller is the relatively simple design equations, which enables plug and play capability. The flat responses are highly interesting from the perspective of power converters especially when they are connected to power grids., This work was partially supported, including FEDER co-funding, by the Spanish Ministerio de Educacin project DPI2015-69286-C3-2-R (MINECO/FEDER), project DPI2013-47100-C2-1-P, and project DPI2016- 79278-C2-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Design of an ejector for a hydrogen recirculation system for a PEM fuel cell

  • Corbella Coll, Xavier
  • Roda, Vicente
  • Torres, Ricardo
  • Husar, Attila
Trabajo presentado en la European Hydrogen Energy Conference, celebrada en Málaga, del 14 al 16 de marzo de 2018, One of the issues that need to be addressed in order to improve the durability and efficiency of a PEM fuel cell system is the management of the hydrogen feeding procedure. It has been demonstrated these aspects are improved when a hydrogen recirculation systems are used [1]. In this work, an ejector has been designed and manufactured and implemented in an experimental PEM fuel cell Test Station to analyze how ejector based hydrogen recirculation systems affect PEM fuel cells. The proper design of an ejector must take into account several geometrical parameters that can only be studied using Computational Fluid Dynamics (CFD). Thus, a CFD model has been implemented with an axisymmetric geometry and the standard k-ε model to approximate the Favre-averaged Navier-Stokes equations. An experimental ejector has been used to validate the CFD model, obtaining very good agreement between experimental results and the model. Finally, a parametric study has been done to find the optimum geometrical parameters for the ejector to be implemented in the Test Station., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI MDM-2016-0656, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

An adaptive disturbance rejection control scheme for voltage regulation in DC micro-grids

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
  • Ramos, German A.
Trabajo presentado en la 20th IEEE International Conference on Industrial Technology, celebrada en Melbourne (Australia) del 13 al 15 de febrero de 2019, Uncertain generation by renewable sources and load variations have resulted in adding energy storage systems in the grid to maintain grid parameters (voltage, frequency) within prescribed limits. The disturbances being non-deterministic in nature, the voltage regulation control by the storage systems relies mostly on dual loop architecture with an outer voltage and inner current loop. Improvement in controller dynamics can be achieved through feed forward of disturbance profile but at expense of additional sensors and communication in the grid. This work explores the application of an adaptive disturbance rejection control scheme for disturbance estimation (without using additional sensors) employing an extended state and proportional integral observer (PI+ESO). The proposed observer aim to achieve robust disturbance estimation under grid parameter uncertainty. The effectiveness of the proposed scheme over the conventional one will be put forward through H¿ and H2 norm analysis of the system. The design and simulation results of the proposed scheme will be presented in this work., This work is done as part of project which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska Curie grant agreement No 675318 (INCITE). This work has been partially funded by the MINECO/FEDER project DPI2015-69286-C3-2-R. This work is supported by the Spanish State Research Agency through the Mara de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Distributed high temperature PEM fuel cell modelling

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • Batlle, Carles
Trabajo presentado en el VII Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, In this article, an HT-PEMFC model based on partial differential equations of fluid dynamics and heat transfer, i.e. distributed model, is defined and introduced as well as the hypoteses assumed for its design. Its formulation, results and implications will be presented as well as its differences with other models presented in the literature., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3- 2-R, MINECO/FEDER). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Modelling of solid oxide electrolizer and hydrogen leak estimation

  • Cifuentes López, Alejandro
  • Husar, Attila
  • Roda, Vicente
  • Morales, M.
  • Bernadet, L.
  • Torrell, M.
  • Serra-Prat, María
Trabajo presentado en el 7th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, Solid Oxide Elecyrolizers (SOEC) are electrochemical devises that produce hydrogen from water using the energy of an electric power source. SOEC operate at high temperatures (around 800ºC) and have efficiencies around 53% [1]. One of the most interesting scenarios of SOEC use is the storage of energy in hydrogen form when renewable power sources do not match the load. Because of this, it is important to study the dynamic behavior of SOEC systems in order to know their ability to adapt to changing power profiles. Different works describe SOEC models in the literature, as reviewed in [2], but time dependent models are scarse [3] and very few of the models are experimentally validated. This work presents a dy-namic model of a SOEC implemented in MATLAB Simulink and its match with experimental data. One important issue in SOEC stacks is hydrogen leak, which aggravates with ageing and is mostly caused by the high operating temperatures. The analysis of the experimental data of this work suggested hydrogen leak. Based on the SOEC thermal model, a methodology to quantify the flow of hydrogen that is leaked out is proposed and applied to the experimental system., This work was done with the support of ACCIÓ (Operational Program FEDER Catalunya 2014-2020) through the COSIN project (ref. COMRDI15-1-0037-06), the Spanish national project MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to the Institut de Robòtica i Informàtica Industrial (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Observador de alta ganancia con zona muerta para pilas de combustible PEM, High-gain dead-zone observer for PEM fuel cells

  • Cecilia, Andreu
  • Costa Castelló, Ramon
Trabajo presentado en las XL Jornadas de Automática: Modelado, Simulación y Optimización, celebradas en Ferrol (España), del 4 al 6 de septiembre de 2019, [ES] En este trabajo se presenta el diseño de un observador de estado para la estimación de la saturación de agua líquida en la capa catalizadora del cátodo de una pila de combustible PEM de cátodo abierto. El observador propuesto se basa en técnicas de alta ganancia, además se modifica con una función de zona muerta dinámica. En este trabajo se muestra que, en ausencia de ruido, el observador propuesto presenta unas prestaciones similares a las de su equivalente sin zona muerta. Además, en presencia de ruido, la zona muerta disminuye significativamente el error de estimación inducido por este., [EN] In this work an observer that estimates the cathode catalyst layer’s liquid water saturation of an open-cathode PEM fuel cell is presented. The proposed observer is based on High-Gain techniques, and is modified with a dynamic dead-zone. In this work, it is shown that, in the absence of noise, the proposed observer presents a similar performance than its non deadzone equivalent. Moreover, in the presence of noise, the dead-zone significantly reduces the estimation error induced by it., Este proyecto se ha financiado parcialmente por el proyecto nacional Español MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER). Este trabajo se ha realizado con el apoyo de la Agencia Estatal de Investigación española a través del sello de excelencia de María de Maeztu, IRI (MDM-2016-0656). Este trabajo se ha financiado parcialmente por AGAUR of Generalitat de Catalunya a través de la subvención del grupo Advanced Control Systems (SAC) (2017 SGR 482). Este trabajo se ha realizado con el apoyo de ACCIÓ (Operational Program FEDER Catalunya 2014-2020) a través de REFER project (COMRDI15-1-0036-11).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Parameter estimation algorithm of H-100 PEM fuel cell

  • Xing, Yashan
  • Na, Jing
  • Costa Castelló, Ramon
Trabajo presentado en el 7th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, Polymer electrolyte membrane fuel cells (PEMFCs) have been recognized as one of the most promising eneygy conversion devices for commercial application due to their specific advantages, such as low operation temperature, zero pollutant emission, and high efficiency, etc. Since PEMFC is a highly nonlinear system and some parameters are related to the operation condition, most existing models are difficult to accurately predict the PEMFC characteristics. Thus, it is necessary to exploit parameter estimation methods for PEMFC to online determine the unknown model parameters by using easily measurable data to obtain concrete models. Most of the parameter estimations schemes for PEMFC have been designed based on intelligent optimization techniques. However, optimization methods cannot address the estimation problem online since they focus exclusively on offline searching procedure, which introduces heavy computational costs in the practical implementation and thus cannot be used in the real-time applications. Therefore, this paper aims to exploit real-time adaptive parameter estimation methods for a nonlinear parametric PEMFC system., This work was partially funded by the Spanish national project MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work was partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and Chinese Scholarship Council (CSC) under grant (201808390007).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

PEM automotive stack model with experimental validation

  • Gómez Pomar, Juan Carlos
  • Dombrovski, J. K.
  • Serra-Prat, María
  • Husar, Attila
Trabajo presentado en el 7th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, Dynamic models of PEM stacks are the basis to design controllers for appropriate performance, maximum efficiency and minimum degradation. Fluid dynamic models of different dimensions can be found in the literature; however, these models are rarely used to improve the control laws and strategies. This work presents a control oriented 1+1D model (distributed in the direction of the stack flow channels). The model is based on a similar model presented by M. Mangold [1], is implemented in MATLAB Simulink. The model is validated using experimental data of a Powercell stack.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Stability analysis of solid oxide fuel cell systems

  • Xing, Yashan
  • Costa Castelló, Ramon
  • Na, Jing
Trabajo presentado en el 7th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, Solid oxide fuel cells (SOFC), with entirely solid structure and high operating temperatures, have attracted research interest in recent years. Unlike other types of fuel cells, low electrode corrosion and low electrolyte looses are assumed due to its solid structure. Furthermore, the high operating temperatures enable SOFC to reach up to 50% to 65% efficiency with excellent impurity tolerance. However, there are several degradation mechanisms in SOFC, such as electrode delamination, electrolyte cracking, electrode poisoning, etc. Most of these degradations are related with the operation conditions, which can be optimized by appropriate control. Since most control algorithms are developed based on the mathematical models, it is important to obtain SOFC control-oriented models. Therefore, this paper aims to develop a SOFC control-oriented model, including the dynamics of inlet manifold, SOFC stack and outlet manifold. Moreover, equilibrium points are characterized and a stability around these equilibrium points analysis is performed. This information can provide guidelines for control strategies design., This work was partially funded by ACCIÓ (Operational Program FEDER Catalunya 2014-2020) through the REFER project (COMRDI15-1-0036-11), the Spanish national project MICAPEM (ref. DPI2015- 69286- C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work was partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and Chinese Scholarship Council (CSC) under grant (201808390007).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Identification of PEM fuel cells based on support vector regression and orthonormal bases

  • Feroldi, Diego Hernán
  • Gómez, Juan Carlos
  • Roda Serrat, Vicente
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Polymer Electrolyte Membrane Fuel Cells (PEMFC) are efficient devices that convert the chemical energy of the reactants in electricity. In this type of fuel cells, the performance of the air supply system is fundamental to improve their efficiency. An accurate mathematical model representing the air filling dynamics for a wide range of operating points is then necessary for control design and analysis. In this paper, a new Wiener model identification method based on Support Vector (SV) Regression and orthonormal bases is introduced and used to estimate a nonlinear dynamical model for the air supply system of a laboratory PEMFC from experimental data. The method is experimentally validated using a PEMFC system based on a ZB 8-cell stack with Nafion 115 membrane electrode assemblies, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

An adaptive disturbance rejection control scheme for voltage regulation in DC micro-grids

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Ramos Fuentes, German A.
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Uncertain generation by renewable sources and load variations have resulted in adding energy storage systems in the grid to maintain grid parameters (voltage, frequency) within prescribed limits. The disturbances being non-deterministic in nature, the voltage regulation control by the storage systems relies mostly on dual loop architecture with an outer voltage and inner current loop. Improvement in controller dynamics can be achieved through feed forward of disturbance profile but at expense of additional sensors and communication in the grid. This work explores the application of an adaptive disturbance rejection control scheme for disturbance estimation (without using additional sensors) employing an extended state and proportional integral observer (PI+ESO). The proposed observer aim to achieve robust disturbance estimation under grid parameter uncertainty. The effectiveness of the proposed scheme over the conventional one will be put forward through H8 and H2 norm analysis of the system. The design and simulation results of the proposed scheme will be presented in this work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Different architectures to develop repetitive controllers

  • Sanz i López, Víctor
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Ramos Fuentes, German A.
© <year>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In this work several architectures to implement repetitive controllers are compared. A complete analytical analysis is performed for these dierent architectures and a simulation example with a power converter is included., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

PEM automotive stack model with experimental validation

  • Gómez Pomar, Juan Carlos
  • Dombrovski, Johanna Katharina
  • Serra, Maria|||0000-0002-9885-8093
  • Husar, Attila Peter|||0000-0001-8503-3837
Dynamic models of PEM stacks are the basis to design controllers for appropriate performance, maximum efficiency and minimum degradation. Fluid dynamic models of different dimensions can be found in the literature; however, these models are rarely used to improve the control laws and strategies. This work presents a control oriented 1+1D model (distributed in the direction of the stack flow channels). The model is based on a similar model presented by M. Mangold [1], is implemented in MATLAB Simulink. The model is validated using experimental data of a Powercell stack., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Adaptive online parameter estimation algorithm of PEM fuel cells

  • Xing, Yashan
  • Jing, Na
  • Costa Castelló, Ramon|||0000-0003-2553-5901
Since most of fuel cell models are generally nonlinearly parameterized functions, existing modeling techniques rely on the optimization approaches and impose heavy computational costs. In this paper, an adaptive online parameter estimation approach for PEM fuel cells is developed in order to directly estimate unknown parameters. The general framework of this approach is that the electrochemical model is first reformulated using Taylor series expansion. Then, one recently proposed adaptive parameter estimation method is further tailored to estimate the unknown parameters. In this method, the adaptive law is directly driven by the parameter estimation errors without using any predictors or observers. Moreover, parameter estimation errors can be guaranteed to achieve exponential convergence. Besides, the online validation of regressor matrix invertibility are avoided such that computation costs can be effectively reduced. Finally, comparative simulation results demonstrate that the proposed approach can achieve better performance than least square algorithm for estimating unknown parameters of fuel cells.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Observador de alta ganancia con zona muerta para pilas de combustible PEM de cátodo abierto

  • Cecilia Piñol, Andreu|||0000-0002-5579-4157
  • Costa Castelló, Ramon|||0000-0003-2553-5901
Premio al mejor trabajo en Ingeniería de Control presentado en las XL Jornadas de Automática, otorgado por el Comité Español de Automàtica, celebradas en Ferrol 2019, En este trabajo se presenta el diseño de un observador de estado para la estimación de la saturación de agua líquida en la capa catalizadora del cátodo de una pila de combustible PEM de cátodo abierto. El observador propuesto se basa en técnicas de alta ganancia, además se modifica con una función de zona muerta dinámica. En este trabajo se muestra que, en ausencia de ruido, el observador propuesto presenta unas prestaciones similares a las de su equivalente sin zona muerta. Además, en presencia de ruido, la zona muerta disminuye significativamente el error de estimación inducido por este., Peer Reviewed, Award-winning
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Stability analysis of solid oxide fuel cell systems

  • Xing, Yashan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Jing, Na
Solid oxide fuel cells (SOFC), with entirely solid structure and high operating temperatures, have attracted research interest in recent years. Unlike other types of fuel cells, low electrode corrosion and low electrolyte looses are assumed due to its solid structure. Furthermore, the high operating temperatures enable SOFC to reach up to 50% to 65% efficiency with excellent impurity tolerance. However, there are several degradation mechanisms in SOFC, such as electrode delamination, electrolyte cracking, electrode poisoning, etc. Most of these degradations are related with the operation conditions, which can be optimized by appropriate control. Since most control algorithms are developed based on the mathematical models, it is important to obtain SOFC control-oriented models. Therefore, this paper aims to develop a SOFC control-oriented model, including the dynamics of inlet manifold, SOFC stack and outlet manifold. Moreover, equilibrium points are characterized and a stability around these equilibrium points analysis is performed. This information can provide guidelines for control strategies design.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Hierarchical and cooperative model predictive control of electrical grids by using overlapping information

  • Sanz i López, Víctor
  • Namerikawa, Toru
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The presented study deals with hierarchical and cooperative model predictive control (MPC) of electrical grids. The aim of this study is minimizing electrical frequency deviation while ensuring power levels do not rise too much. The original system is a simply interconnected one divided in several areas and, in order to control eventually disconnected areas due to communication blackouts, an expansion of the original system to a hierarchical version of itself by overlapping original system’s areas., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

An analysis of energy storage system interaction in a multi objective model predictive control based energy management in DC microgrid

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Non-deterministic generation from renewable sources have resulted in the incorporation energy storage systems in modern grids. Management of energy between different storage elements need to done optimally to ensure efficient operation of the grid. The intraday energy management problem is addressed in this work through an online model predictive control using multi objective optimisation. This work analyses the energy interaction among different storages when penalty weights in a multi objective optimisation problem is varied, in order to find an optimal scenario in terms of weight distribution. Different scenarios are identified and performance indices are proposed to achieve the same. The work also addresses implicitly the objective of minimising rate of degradation batteries. Simulation results are presented to aid in the analysis., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Distributed high temperature PEM fuel cell modelling

  • Sanz i López, Víctor
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Batlle Arnau, Carles|||0000-0002-6088-6187
Trabajo presentado en el VII Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, In this article, an HT-PEMFC model based on partial differential equations of fluid dynamics and heat transfer, i.e. distributed model, is defined and introduced as well as the hypoteses assumed for its design. Its formulation, results and implications will be presented as well as its differences with other models presented in the literature., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3- 2-R, MINECO/FEDER). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Observación de la fracción de agua líquida en pilas de combustible tipo PEM de cátodo abierto

  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Luna Pacho, Julio Alberto
En este trabajo se diseña un observador no-lineal basado en modos deslizantes para la estimación de la fracción de agua líquida en una pila de combustible tipo PEM de cátodo abierto. La pila de combustible se modela con dos estados dinámicos: la temperatura de la pila y la saturación de agua líquida. La estrategia de observación se valida en simulación mediante un ciclo de conducción ARTEMIS.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Parameter estimation algorithm of H-100 PEM fuel cell

  • Xing, Yashan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Jing, Na
Best Oral Communication Award for Young Authors, atorgat pel comitè científic HYCELTEC 2019, Polymer electrolyte membrane fuel cells (PEMFCs) have been recognized as one of the most promising eneygy conversion devices for commercial application due to their specific advantages, such as low operation temperature, zero pollutant emission, and high efficiency, etc. Since PEMFC is a highly nonlinear system and some parameters are related to the operation condition, most existing models are difficult to accurately predict the PEMFC characteristics. Thus, it is necessary to exploit parameter estimation methods for PEMFC to online determine the unknown model parameters by using easily measurable data to obtain concrete models. Most of the parameter estimations schemes for PEMFC have been designed based on intelligent optimization techniques. However, optimization methods cannot address the estimation problem online since they focus exclusively on offline searching procedure, which introduces heavy computational costs in the practical implementation and thus cannot be used in the real-time applications. Therefore, this paper aims to exploit real-time adaptive parameter estimation methods for a nonlinear parametric PEMFC system., Peer Reviewed, Award-winning
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Temperature control of open-cathode PEM fuel cells

  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Strahl, Stephan
Proper temperature control of Proton Exchange Membrane (PEM) Fuel Cells is a crucial factor for optimizing fuel cell performance. A robust temperature controller is required for optimal water management of PEM fuel cells. This paper describes a model-based characterization of the equilibrium points of an open-cathode fuel cell system as the baseline for proper controller design, highlighting the relation between fuel cell temperature, humidification and performance. Phase plane analysis of the nonlinear model versus a linearized model around different points of operation shows the potential of approximating the nonlinear system behavior with a linear model. The methodology for the system analysis presented in this paper finally serves for the development of control schemes using robust control techniques. The designed controller is validated in simulation with the nonlinear plant model.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Hierarchical and cooperative model predictive control of electrical grids by using overlapping information

  • Sanz i López, Víctor
  • Namerikawa, Toru
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The presented study deals with hierarchical and cooperative model predictive control (MPC) of electrical grids. The aim of this study is minimizing electrical frequency deviation while ensuring power levels do not rise too much. The original system is a simply interconnected one divided in several areas and, in order to control eventually disconnected areas due to communication blackouts, an expansion of the original system to a hierarchical version of itself by overlapping original system’s areas., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

PEM automotive stack model with experimental validation

  • Gómez Pomar, Juan Carlos
  • Dombrovski, Johanna Katharina
  • Serra, Maria
  • Husar, Attila Peter
Dynamic models of PEM stacks are the basis to design controllers for appropriate performance, maximum efficiency and minimum degradation. Fluid dynamic models of different dimensions can be found in the literature; however, these models are rarely used to improve the control laws and strategies. This work presents a control oriented 1+1D model (distributed in the direction of the stack flow channels). The model is based on a similar model presented by M. Mangold [1], is implemented in MATLAB Simulink. The model is validated using experimental data of a Powercell stack., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Temperature control of open-cathode PEM fuel cells

  • Costa Castelló, Ramon
  • Strahl, Stephan
Proper temperature control of Proton Exchange Membrane (PEM) Fuel Cells is a crucial factor for optimizing fuel cell performance. A robust temperature controller is required for optimal water management of PEM fuel cells. This paper describes a model-based characterization of the equilibrium points of an open-cathode fuel cell system as the baseline for proper controller design, highlighting the relation between fuel cell temperature, humidification and performance. Phase plane analysis of the nonlinear model versus a linearized model around different points of operation shows the potential of approximating the nonlinear system behavior with a linear model. The methodology for the system analysis presented in this paper finally serves for the development of control schemes using robust control techniques. The designed controller is validated in simulation with the nonlinear plant model., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Stability analysis of solid oxide fuel cell systems

  • Xing, Yashan
  • Costa Castelló, Ramon
  • Jing, Na
Solid oxide fuel cells (SOFC), with entirely solid structure and high operating temperatures, have attracted research interest in recent years. Unlike other types of fuel cells, low electrode corrosion and low electrolyte looses are assumed due to its solid structure. Furthermore, the high operating temperatures enable SOFC to reach up to 50% to 65% efficiency with excellent impurity tolerance. However, there are several degradation mechanisms in SOFC, such as electrode delamination, electrolyte cracking, electrode poisoning, etc. Most of these degradations are related with the operation conditions, which can be optimized by appropriate control. Since most control algorithms are developed based on the mathematical models, it is important to obtain SOFC control-oriented models. Therefore, this paper aims to develop a SOFC control-oriented model, including the dynamics of inlet manifold, SOFC stack and outlet manifold. Moreover, equilibrium points are characterized and a stability around these equilibrium points analysis is performed. This information can provide guidelines for control strategies design., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Adaptive online parameter estimation algorithm of PEM fuel cells

  • Xing, Yashan
  • Jing, Na
  • Costa Castelló, Ramon
Since most of fuel cell models are generally nonlinearly parameterized functions, existing modeling techniques rely on the optimization approaches and impose heavy computational costs. In this paper, an adaptive online parameter estimation approach for PEM fuel cells is developed in order to directly estimate unknown parameters. The general framework of this approach is that the electrochemical model is first reformulated using Taylor series expansion. Then, one recently proposed adaptive parameter estimation method is further tailored to estimate the unknown parameters. In this method, the adaptive law is directly driven by the parameter estimation errors without using any predictors or observers. Moreover, parameter estimation errors can be guaranteed to achieve exponential convergence. Besides, the online validation of regressor matrix invertibility are avoided such that computation costs can be effectively reduced. Finally, comparative simulation results demonstrate that the proposed approach can achieve better performance than least square algorithm for estimating unknown parameters of fuel cells., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Identification of PEM fuel cells based on support vector regression and orthonormal bases

  • Feroldi, Diego Hernán
  • Gómez, Juan Carlos
  • Roda Serrat, Vicente
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Polymer Electrolyte Membrane Fuel Cells (PEMFC) are efficient devices that convert the chemical energy of the reactants in electricity. In this type of fuel cells, the performance of the air supply system is fundamental to improve their efficiency. An accurate mathematical model representing the air filling dynamics for a wide range of operating points is then necessary for control design and analysis. In this paper, a new Wiener model identification method based on Support Vector (SV) Regression and orthonormal bases is introduced and used to estimate a nonlinear dynamical model for the air supply system of a laboratory PEMFC from experimental data. The method is experimentally validated using a PEMFC system based on a ZB 8-cell stack with Nafion 115 membrane electrode assemblies, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Parameter estimation algorithm of H-100 PEM fuel cell

  • Xing, Yashan
  • Costa Castelló, Ramon
  • Jing, Na
Best Oral Communication Award for Young Authors, atorgat pel comitè científic HYCELTEC 2019, Polymer electrolyte membrane fuel cells (PEMFCs) have been recognized as one of the most promising eneygy conversion devices for commercial application due to their specific advantages, such as low operation temperature, zero pollutant emission, and high efficiency, etc. Since PEMFC is a highly nonlinear system and some parameters are related to the operation condition, most existing models are difficult to accurately predict the PEMFC characteristics. Thus, it is necessary to exploit parameter estimation methods for PEMFC to online determine the unknown model parameters by using easily measurable data to obtain concrete models. Most of the parameter estimations schemes for PEMFC have been designed based on intelligent optimization techniques. However, optimization methods cannot address the estimation problem online since they focus exclusively on offline searching procedure, which introduces heavy computational costs in the practical implementation and thus cannot be used in the real-time applications. Therefore, this paper aims to exploit real-time adaptive parameter estimation methods for a nonlinear parametric PEMFC system., Peer Reviewed, Award-winning, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Distributed high temperature PEM fuel cell modelling

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • Batlle Arnau, Carles
Trabajo presentado en el VII Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, In this article, an HT-PEMFC model based on partial differential equations of fluid dynamics and heat transfer, i.e. distributed model, is defined and introduced as well as the hypoteses assumed for its design. Its formulation, results and implications will be presented as well as its differences with other models presented in the literature., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3- 2-R, MINECO/FEDER). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An adaptive disturbance rejection control scheme for voltage regulation in DC micro-grids

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon
  • Ramos Fuentes, German A.
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Uncertain generation by renewable sources and load variations have resulted in adding energy storage systems in the grid to maintain grid parameters (voltage, frequency) within prescribed limits. The disturbances being non-deterministic in nature, the voltage regulation control by the storage systems relies mostly on dual loop architecture with an outer voltage and inner current loop. Improvement in controller dynamics can be achieved through feed forward of disturbance profile but at expense of additional sensors and communication in the grid. This work explores the application of an adaptive disturbance rejection control scheme for disturbance estimation (without using additional sensors) employing an extended state and proportional integral observer (PI+ESO). The proposed observer aim to achieve robust disturbance estimation under grid parameter uncertainty. The effectiveness of the proposed scheme over the conventional one will be put forward through H8 and H2 norm analysis of the system. The design and simulation results of the proposed scheme will be presented in this work., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An analysis of energy storage system interaction in a multi objective model predictive control based energy management in DC microgrid

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Non-deterministic generation from renewable sources have resulted in the incorporation energy storage systems in modern grids. Management of energy between different storage elements need to done optimally to ensure efficient operation of the grid. The intraday energy management problem is addressed in this work through an online model predictive control using multi objective optimisation. This work analyses the energy interaction among different storages when penalty weights in a multi objective optimisation problem is varied, in order to find an optimal scenario in terms of weight distribution. Different scenarios are identified and performance indices are proposed to achieve the same. The work also addresses implicitly the objective of minimising rate of degradation batteries. Simulation results are presented to aid in the analysis., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Observador de alta ganancia con zona muerta para pilas de combustible PEM de cátodo abierto

  • Cecilia Piñol, Andreu
  • Costa Castelló, Ramon
Premio al mejor trabajo en Ingeniería de Control presentado en las XL Jornadas de Automática, otorgado por el Comité Español de Automàtica, celebradas en Ferrol 2019, En este trabajo se presenta el diseño de un observador de estado para la estimación de la saturación de agua líquida en la capa catalizadora del cátodo de una pila de combustible PEM de cátodo abierto. El observador propuesto se basa en técnicas de alta ganancia, además se modifica con una función de zona muerta dinámica. En este trabajo se muestra que, en ausencia de ruido, el observador propuesto presenta unas prestaciones similares a las de su equivalente sin zona muerta. Además, en presencia de ruido, la zona muerta disminuye significativamente el error de estimación inducido por este., Peer Reviewed, Award-winning, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Different architectures to develop repetitive controllers

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • Ramos Fuentes, German A.
© <year>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In this work several architectures to implement repetitive controllers are compared. A complete analytical analysis is performed for these dierent architectures and a simulation example with a power converter is included., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Observación de la fracción de agua líquida en pilas de combustible tipo PEM de cátodo abierto

  • Costa Castelló, Ramon
  • Luna Pacho, Julio Alberto
En este trabajo se diseña un observador no-lineal basado en modos deslizantes para la estimación de la fracción de agua líquida en una pila de combustible tipo PEM de cátodo abierto. La pila de combustible se modela con dos estados dinámicos: la temperatura de la pila y la saturación de agua líquida. La estrategia de observación se valida en simulación mediante un ciclo de conducción ARTEMIS., Postprint (published version)