Skip to main content

SOLUCIONES TECNOLOGICAS PARA LA IMPLANTACION DE MATERIALES SUPERCONDUCTORES EN MAQUINAS ELECTRICAS DE POTENCIA

ENE2014-52105-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Laser induced circular texture in Bi-2212 bulk

  • Amaveda, H.
  • Martínez Fernández, Elena
  • Mora Alfonso, Mario
  • Fuente, Germán F. de la
  • Angurel, Luis A.
Trabajo presentado a la 13th European Conference on Applied Superconductivity (EUCAS), celebrada en Geneva (Suiza) del 17 al 21 de septiembre de 2017., Laser Zone melting (LZM) has been widely used to induce texture in Bi-2212 bulk materials, both in cylindrical geometries and in monolithic planar samples. Texture is induced due to its strong crystal growth anisotropy, obtaining a microstructure characterized by planar superconducting grains with the a-b plane aligned perpendicular to the solidification front. This technology has produced samples with high critical current values when the current flows in the longitudinal direction (i.e. parallel to the grain’s a-b planes). In addition, this geometry induces critical current anisotropy, with values of the order of 0.45 lower when the critical current is measured perpendicular to the longitudinal direction. In this work we present the use of Laser Zone melting techniques to process planar monolithic samples either with a ring geometry or with more complex shapes, such helical, meander, etc, where the current path direction is not constant, and therefore superconducting grains have to change their growth direction. Combining different sample movements during LZM process it is possible to assure that the solidification front is always perpendicular to the current path direction. We have performed a microstructural analysis of these samples in order to analyse the effect of changing growth direction during process for the different analysed geometries. The microstructure depends on the size of the superconducting grains and on the radius needed to perform this change in direction. It is important to have in mind that these grains can reach sizes of the order of millimetres. It has been observed that the superconducting grains form a set of domains, changing smoothly their growth direction. The processing parameters allow the control of the angles between consecutive domains needed to minimize the reduction in the critical current thattakes place when the current has to change its flowing direction. In all the cases, the critical current values in the different regions of the samples have been measured., This work was supported by the Spanish Ministerio de Economía y Competitividad and the European FEDER Program (project ENE2014-52105-R), by the Gobierno de Aragón (research groups T12 and T87)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Laser modification of 2G-HTS tapes surface

  • Turan, Neslihan
  • Martínez Fernández, Elena
  • Fuente, Germán F. de la
  • Angurel, Luis A.
  • Koralay, Haluk
  • Cavdar, Sukru
Trabajo presentado a la 13th European Conference on Applied Superconductivity (EUCAS), celebrada en Geneva (Suiza) del 17 al 21 de septiembre de 2017., Lasers are powerful tools to modify materials surfaces and to produce a controlled set of defects. At this moment new UV-lasers, with emission in the picosecond regime, are appearing in the market. In this study, second generation of high temperature superconducting (2G-HTS) tapes are scanned with these ps-UV pulsed lasers to generate a uniform micro and nanostructure on the surface of these tapes. We have been studying the influence of several parameters that are important in laser processing. When the burst mode is used, individual dots are created in the surface of the superconductor. We have analysed the influence of the energy of each individual laser pulse and the number of pulses. We have observed that, depending on the total energy in each dot, different regimes are reached. We have determined which is the minimum energy to start to affect the superconductor and which is the energy level that completely destroys the superconducting layer. This allows defining the range of working conditions that can be used in these experiments. When a continuous laser-scanning mode is used, other parameters are also relevant: the energy of the laser beam, the frequency, its scanning speed or the overlapping between different lines. In addition a wobbling mode can be used. Modification of all these parameters allows to develop a wide range of microstructures on the sample surface. These deformed regions were examined with FESEM and Confocal microscopy, and, in combination with SQUID magnetometry, they provided information to ascertain how the samples magnetic properties were modified., This work was supported by TUBITAK (115F008 and 2214-A 1059B141501207) and by the Spanish MINECO and the European FEDER Program (project ENE2014-52105-R), by the Gobierno de Aragón (research groups T12 and T87)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Magneto-optical, microstructural and magnetization measurements of in situ Fe/MgB2 conductors made from ball-milled precursor

  • Martínez Fernández, Elena
  • Laliena, Carlos
  • Qureishy, T.
  • Navarro, Rafael
  • Mikheenko, P.
  • Johansen, T. H.
  • Kováč, P.
Trabajo presentado a la 13th European Conference on Applied Superconductivity (EUCAS), celebrada en Geneva (Suiza) del 17 al 21 de septiembre de 2017., Highly uniform microstructure and phase composition as well as technologically reproducible critical current densitiy, Jc, is compulsory for advanced applications of MgB conductors. Grain refinement by mechanical ball-milling of precursor powders would improve homogeneity and provide additional pinning. The increase of the milling energy transferred to the precursor causes a significant enhancement of Jc in the high field region but may also produce some undesirable effects such as a decrease of Jc values at low magnetic fields, higher oxygen content and, in some cases, degradation of the deformation properties during wire manufacture. To further explore the reasons of such a decrease in Jc in the low field range, we have analysed the local magnetic flux distribution inside MgB tapes made from different balled-milled powders using magneto-optical (MO) imaging. MO imaging performed in field-cooled samples, following a specific magnetic field sequence, highlights the distortions in the magnetic pattern so that it has been found very helpful to reveal inhomogeneities in the superconductor. The combined analysis of MO, scanning electron microscopy images and magnetization measurements has revealed hidden mechanisms controlling their critical current density. Local degradation of the superconducting properties observed in some analysed conductors has been identified and correlated with microstructural observations., This work was supported by the Spanish Ministerio de Economía y Competitividad and the European FEDER Program (Projects MAT2011-22719 and ENE-2014-52105-R) and by Gobierno de Aragón (research group T12)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Quench propagation in Rutherford MgB2 cables

  • Cubero, A.
  • Martínez Fernández, Elena
  • Navarro, Rafael
  • Kováč, P.
  • Kopera, L.
Trabajo presentado a la 13th European Conference on Applied Superconductivity (EUCAS), celebrada en Geneva (Suiza) del 17 al 21 de septiembre de 2017., Rutherford cables offer several advantages over single conductors for different foreseen applications, since they are more flexible and may achieve a reduction of the AC losses by using appropriate transposition length and inter-strand electrical resistance. Furthermore, the optimization of these cables should also achieve the required thermal stability, which is mainly determined by the thermal conductivity along the wires, as well as the heat transfer across the strands. The quench propagation of two types of MgB Rutherford cables has been measured and analysed. Both cables are made of 12 strands with a transposition length of about 20 mm and have rectangular cross-section with final dimensions of 2.7 mm width and 0.7 mm thickness. Two different wires were used as strands: mono- and multi-filamentary wires with Cu10Ni and Cu sheaths, respectively. Both wires have similar diameter of 0.39 mm and Nb barrier to minimise the chemical reaction between the precursor powders and the sheath during the in situ formation of the MgB phase. The quench development has been induced by a local hot spot at different operating conditions. The quench propagation has been analysed using voltage taps placed at different positions of the strands. The effect of the sheath metal on the relevant quench parameters, such as quench propagation velocity and minimum quench energy, is also presented., This work was supported by the Spanish Ministerio de Economía y Competitividad and the European FEDER Program (project ENE-2014-52105-R) and by the Gobierno de Aragón (research group T12)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Thermal stability of conduction-cooled no-insulated HTS coils at currents up to 400 A

  • Cubero, A.
  • Núñez-Chico, A. B.
  • Navarro, Rafael
  • Angurel, Luis A.
  • Martínez Fernández, Elena
Trabajo presentado a la 14th European Conference on Applied Superconductivity (EUCAS), celebrada en Glasgow (Escocia) del 1 al 5 de septiembre de 2019., This work was supported by Spanish Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (AEI) and European FEDER Program (projects ENE-2014-52105-R and ENE2017-83669-C4-1-R) and by the regional Gobierno de Aragón “Construyendo Europa desde Aragón” (research group T54_17R)., Peer reviewed