Skip to main content

EMISIONES NEGATIVAS DE CO2 MEDIANTE COMBUSTION DE BIOMASA EN PROCESOS DE CHEMICAL LOOPING

ENE2014-56857-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Comparative evaluation of the performance of coal combustion in 0.5 and 50 kWth Chemical Looping Combustion units with ilmenite, redmud or iron ore as oxygen carrier.

  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Bueno, José A.
  • Pérez-Vega, Raúl
  • Adánez Elorza, Juan
13 figures, 2 tables.-- Work presented at the 13th International Conference on Greenhouse Gas Control Technologies, GHGT-13, 14-18 November 2016, Lausanne, Switzerland, Chemical Looping Combustion (CLC) is one of the most promising technologies to achieve the CO2 capture at a low economic and energetic penalty. In CLC the combustion is split in two steps: fuel combustion assisted by an oxygen carrier in the fuel reactor, and oxygen carrier regeneration in the air reactor by oxygen in air. Usually, the air and fuel reactors are interconnected fluidized beds, with the oxygen carrier circulating between them. Thus, the CO2 capture is inherent to the CLC process. The use of solid fuels in CLC is attracting great attention due to coal is the most abundant fuel, and burning biomass with CO2 capture would allow to reduce the atmospheric CO2 concentration. The in situ Gasification CLC (iG-CLC) allows the conversion of the solid fuel by performing both gasification and combustion of gasification products in the fuel reactor. In iG-CLC complete combustion is not reached, and an oxygen polishing step is required downstream by using a small fraction of pure oxygen., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for the funding received from the ENE2013-45454-R and ENE 2014-56857-R projects, as well as the European Regional Development Fund (ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Combustion and reforming of liquid fossil fuels through chemical looping processes: integration of chemical looping processes in a refinery

  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • García-Díez, Enrique
  • Serrano Oliván, Anabel
  • Abad Secades, Alberto
  • Gayán Sanz, Pilar
  • Adánez Elorza, Juan
8 Figures, 2 Tables.-- Work presented at the 13th International Conference on Greenhouse Gas Control Technologies, GHGT-13, 14-18 November 2016, Lausanne, Switzerland., Oil refining processes demand and use vast quantities of energy and thus are responsible for the emission of a great deal of CO2. In addition, hydrogen is used in oil refineries for hydrodesulfurization and hydrocraking processes. In this sense, the integration of Chemical Looping technology in an oil refinery using vacuum residues as fuel could drive to significant reductions in CO2 emissions. In this work, Chemical Looping Combustion (CLC) and Chemical Looping Reforming (CLR) experiments have been carried out in a continuously operated 1 kWth unit using a Cu- and Ni-based oxygen carrier, respectively. Diesel, synthetic and mineral lubricant oil were used as fuels as a previous step to the use of low grade residues. Regarding Chemical Looping Combustion conditions, almost 100% of combustion efficiency and full carbon capture were obtained at low oxygen carrier-to-fuel molar ratios (ϕ≥1.6). Regarding Chemical Looping Reforming conditions, a syngas containing a H2 concentration over 50 vol.% in dry basis was obtained with the additional advantage of reaching 100% CO2 capture efficiency in the process. In all cases, syngas composition obtained was close to the given by the thermodynamic equilibrium. These results provide a basis for concluding that the integration of Chemical Looping processes for heat/steam and hydrogen production in an oil refinery is feasible and could lead to significant environmental advantages., This work was partially supported by the Spanish Ministry for Science and Innovation (MICINN, project ENE2011-26354, ENE2014-56857-R), European Regional Development Fund (ERDF) and by the Government of Aragón (Spain, DGA ref. T06). A. Serrano also thanks the Spanish Ministry of Economy and Competitiveness for the F.P.I. fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Chemical Looping Combustion of biomass: an approach to BECCS

  • Mendiara, Teresa
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Pérez-Astray, Antón
  • Izquierdo Pantoja, María Teresa
  • Abad Secades, Alberto
  • Adánez Elorza, Juan
Work presented at the 13th International Conference on Greenhouse Gas Control Technologies (GHGT), Lausanne, Switzerland, Nov. 14-18, 2016, The climate change challenge demands a commitment of combined strategies between global institutions, governments, companies and citizens. In order to reach 2015 Paris Agreement, greenhouse gas emissions need to be reduced. Any single technology is currently able to achieve atmospheric greenhouse concentration values for the purpose of climate change mitigation. Also carbon sinks will be needed to further this cause as well as Carbon Capture and Storage (CCS) technologies. In this sense, biomass represents an interesting alternative fuel for heat and power production as a carbon dioxide-neutral fuel. Moreover, if the CO2 generated during biomass combustion process was captured then negative-CO2 emissions would be reached. In this way, Bio-Energy with Carbon Capture and Storage (BECCS) technologies enable energy generation while CO2 is being removed from the atmosphere., Among the different options, Chemical Looping Combustion (CLC) is considered one of the most promising second generation CCS technologies due to its negligible energy and cost penalty for CO2 capture. In this work, three types of biomass were evaluated under CLC conditions: pine sawdust, olive stone and almond shell. Combustion experiments were performed in a continuous 500 Wth CLC unit at Instituto de Carboquímica (ICB-CSIC, Spain) using a highly-reactive low-cost iron ore as oxygen carrier (Tierga ore). During the experimental campaign, the effect of fuel reactor temperature (900-980 °C) on the combustion performance was analyzed. At the highest temperature tested (980 °C) a CO2 capture efficiency of 100% was reached with all the biomasses. However, the total oxygen demand followed no clear trend with temperature and the average value was close to 25%. The high volatile content of biomass compared to coal contributed to this effect. For a correct operation with biomass, further design measures should be taken to reduce the amount of unburned compounds at the outlet of the fuel reactor. In addition, tar and NOx measurements were done. No relevant drawbacks by the use of biomass in CLC were found related with other pollutants present in the system such as tar production or NOx emissions., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for the funding received from the project ENE2014-56857-R) and by the European Regional Development Fund (ERDF) for the financial support. T. Mendiara thanks for the ‘‘Ramón y Cajal’’ post-doctoral contract awarded by MINECO. A. Pérez-Astray thanks MINECO for the FPI fellowship co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Biomass combustion with CO2 capture in a 20 kWth CLC plant

  • Pérez-Astray, Antón
  • Pérez-Vega, Raúl
  • Mendiara, Teresa
  • Diego Poza, Luis F. de
  • Abad Secades, Alberto
  • García Labiano, Francisco
  • Gayán Sanz, Pilar
  • Izquierdo Pantoja, María Teresa
  • Adánez Elorza, Juan
Presentado en las XXXVI Jornadas Nacionales de Ingeniería Química, JNIQ 2019, Zaragoza, 4-6 Sep. 2019., Bioenergy with Carbon Capture and Storage (BECCS) represents an interesting option to achieve the negative CO2 emissions needed to comply with the climate challenges set in the Paris Agreement (COP21-2015). Chemical Looping Combustion (CLC) technology has revealed as one of the CO2 capture technologies with less energy penalty and lower cost. CLC combined with biomass could become a promising BECCS technology. The objective of this work was to asses the feasibility of the CLC technology using biomass as fuel as a future BECCS technology., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO Projects: ENE2014-56857-R, ENE2016-77982-R and ENE2017-89473-R) and European Regional Development Fund (ERDF). A. Pérez-Astray thanks MINECO for the BES-2015-074651 co-financed by the European Social Fund. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

CO2 capture by Chemical Looping Processes using C-fuels

  • García Labiano, Francisco
  • Izquierdo Pantoja, María Teresa
  • Diego Poza, Luis F. de
  • Gayán Sanz, Pilar
  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Adánez Elorza, Juan
1 figure.-- Work presented at the Carbon 2018 ´"The World Conference of Carbon", Madrid (Spain), 01st-6th July, According to the IPCC, warming of the climate system is unequivocal and this is mainly consequence of the increase in the CO2 concentration in the atmosphere. In addition, “Human influence on the climate system is clear, and recent anthropogenic emissions of greenhouse gases are the highest in history”. These emissions are mainly consequence of the burning of C-fuels, mostly fossil fuels, which result in a net increase in carbon concentration in the atmosphere, soil and oceans. In fact, the natural carbon cycle in the earth is being affected. Limiting climate change would require substantial and sustained reductions in greenhouse gas emissions. The measures considered for the reduction of CO2 emissions to the atmosphere include the improvement in the use and generation of energy, the use of nuclear energy, the boost of energy generation from renewable sources and the CO2 capture and storage (CCS)., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (projects ENE2014-56857-R, ENE2016-77982-R, and ENE2017-89473-R), by the European Regional Development Fund (ERDF), by the CSIC (201780E035), and by the Government of Aragón. T. Mendiara thanks for the “Ramón y Cajal” post-doctoral contract awarded by MINEICO.