Skip to main content

CELULAS SOLARES DE HETEROUNION DE SILICIO DE ESTRUCTURA NO CONVENCIONAL

ENE2016-78933-C4-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Selective laser ablation of transition metal oxide thin films for SHJ solar cells

  • Muñoz García, Cristina
  • Canteli, David
  • Lauzurica, Sara
  • Morales Furio, Miguel
  • Molpeceres Alvarez, Carlos
  • Tom, Thomas
  • Asensi, José Miguel
  • Bertomeu Balagueró, Joan
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • López González, Juan Miguel|||0000-0002-5718-5101
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
An alternative to the use of amorphous silicon (a-Si:H) in silicon heterojunction (SHJ) solar cells are transition metal oxide (TMO) films. TMOs act as passivators and as selective contacts, i.e. hole transport layers (HTL) or electron transport layers (ETL). Due to their chemical properties these oxides act as transparent contacts with semiconducting properties. Three TMOs, molybdenum oxide, vanadium oxide, and tungsten oxide, show good properties for use as p-type front contacts for n-type crystalline silicon heterojunction solar cells. In this work we show a complete study of the laser removal of WOx, VOx and MoOx films deposited on crystalline silicon using laser sources of three different wavelengths (355 nm, 532 nm, and 1064 nm) and in two temporal regimes in pulse width (picoseconds and nanoseconds). We measure the fluence threshold to remove TMO film, and the threshold to induce damage in the substrate, allowing us to calculate the parametric window of the process. We also studied the relation between crater dimensions and ablation parameters. Complete removal of the three different TMO films has been achieved without damage to the silicon substrate. The results of diode isolation and their electrical characteristics are also included, showing the quality of the laser isolation processes., Partial financial support has been provided by the Spanish Ministry of Science and Innovation under the projects CHENOC (ENE2016–78933-C4–1-R and ENE2016–78933-C4–4-R) and SCALED (PID2019109215RB-C41 and PID2019–109215RB-C44)., Peer Reviewed, 7 - Energia Assequible i No Contaminant
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Electron selective contacts based on Al2O3/TiO2/ZnO stacks for crystalline silicon solar cells

  • Zafoschnig, Lisa
  • Ortega Villasclaras, Pablo Rafael
  • Martín García, Isidro
  • Masmitjà Rusiñol, Gerard
  • López Rodríguez, Gema
  • Alcubilla González, Ramón
In the last years, our research group has focused on the development of Interdigitated Back Contacted (IBC) solar cells based on transition metal oxides. In particular, a very thin Al2O3/TiO2 stack deposited by ALD has demonstrated excellent results. The point of this work is to try to develop a transparent conductive oxide that could be inserted in between the passivating layers and the metal contact in order to improve rear reflector properties. As a good candidate, we focus on Zinc Oxide (ZnO) deposited from DEZ (Ditehylzinc) and water as gas precursors. A deposition rate of 1.76 A/cycle is found for layers deposited at 125 ºC indicating a self-limited reaction, i.e. atomic layer deposition process. This film has an optical band gap of 3.26 eV demonstrating good optical properties to work as a back reflector. Unfortunately, contact quality with these layers is very poor. In order to investigate the origin of such a poor performance, we measure ZnO workfunction by Scanning Kelvin Probe resulting in 4.85 eV. This value suggests that the developed ZnO films could work better in a hole selective contact. To demonstrate this point, contacts on MoOx layers were fabricated leading to reasonable contact resistance values of 43 mohmscm. Passivation properties of these contacts will be addressed in the future in order to consider their introduction into the final IBC solar cell., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Origin of the negative differential resistance in the output characteristics of a picene-based thin-film transistor

  • Ros, Eloi
  • Puigdollers i González, Joaquim
  • Ortega Villasclaras, Pablo Rafael
  • Voz Sánchez, Cristóbal
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this work, we have fabricated and studied p-type picene thin-film transistors. Although the devices exhibited good electrical performance with high field-effect mobility (up to 1.3 cm2/V¿s) and on/off ratios above 105, the output electric characteristics of the devices exhibited a Negative Differential Resistance for higher drain-source voltage. Finally, a possible explanation for this phenomenon is developed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Selective laser ablation of transition metal oxide thin films for SHJ solar cells

  • Muñoz García, Cristina
  • Canteli, David
  • Lauzurica, Sara
  • Morales Furio, Miguel
  • Molpeceres Alvarez, Carlos
  • Tom, Thomas
  • Asensi, José Miguel
  • Bertomeu Balagueró, Joan
  • Ros Costals, Eloi
  • Ortega Villasclaras, Pablo Rafael
  • López González, Juan Miguel
  • Voz Sánchez, Cristóbal
An alternative to the use of amorphous silicon (a-Si:H) in silicon heterojunction (SHJ) solar cells are transition metal oxide (TMO) films. TMOs act as passivators and as selective contacts, i.e. hole transport layers (HTL) or electron transport layers (ETL). Due to their chemical properties these oxides act as transparent contacts with semiconducting properties. Three TMOs, molybdenum oxide, vanadium oxide, and tungsten oxide, show good properties for use as p-type front contacts for n-type crystalline silicon heterojunction solar cells. In this work we show a complete study of the laser removal of WOx, VOx and MoOx films deposited on crystalline silicon using laser sources of three different wavelengths (355 nm, 532 nm, and 1064 nm) and in two temporal regimes in pulse width (picoseconds and nanoseconds). We measure the fluence threshold to remove TMO film, and the threshold to induce damage in the substrate, allowing us to calculate the parametric window of the process. We also studied the relation between crater dimensions and ablation parameters. Complete removal of the three different TMO films has been achieved without damage to the silicon substrate. The results of diode isolation and their electrical characteristics are also included, showing the quality of the laser isolation processes., Partial financial support has been provided by the Spanish Ministry of Science and Innovation under the projects CHENOC (ENE2016–78933-C4–1-R and ENE2016–78933-C4–4-R) and SCALED (PID2019109215RB-C41 and PID2019–109215RB-C44)., Peer Reviewed, 7 - Energia Assequible i No Contaminant, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Patterning of WOx, VOx, and MoOx thin-films with picosecond and nanosecond laser sources

  • Muñoz García, Cristina
  • Canteli, David
  • Lauzurica, Sara
  • Morales Furio, Miguel
  • Molpeceres Alvarez, Carlos
  • Ros Costals, Eloi
  • Ortega Villasclaras, Pablo Rafael
  • López González, Juan Miguel
  • Voz Sánchez, Cristóbal
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Transition metal oxide (TMOs) layers have interesting properties as selective contacts, i.e., hole or electron transport layers for novel semiconductor devices. Especially, oxides of molybdenum (MoO3), vanadium (V2O5), and tungsten (WO3) show good bahaviour acting as front hole-selective contacts for n-type crystalline-silicon heterojunction solar cells. Laser scribing has been widely used for thin-film ablation and seems the appropriate technology for device manufacturing with such non-conventional materials. In this work, we study the laser scribing of non-stoichiometric evaporated WOx, VOx, and MoOx films with three different wavelengths (1064, 532, and 355 nm) with pulse duration in the nanosecond and picosecond regimes. The selection of the proper laser source allows a wide parametric window, with complete removal of the TMO films and no alteration of the silicon substrate. The results on the isolation of diodes and their electrical characteristics show the quality of the laser scribing processes., Partial financial support has been provided by the Spanish Ministry of Science and Innovation under the projects CHENOC (ENE2016–78933-C4–1-R and ENE2016– 78933-C4–4-R) and SCALED (PID2019–109215RB-C41 and PID2019–109215RB-C44)., Peer Reviewed, Postprint (published version)