Skip to main content

CELULAS SOLARES DE HETEROUNION DE SILICIO DE ESTRUCTURA NO CONVENCIONAL

ENE2016-78933-C4-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Selective laser ablation of transition metal oxide thin films for SHJ solar cells

  • Muñoz García, Cristina
  • Canteli, David
  • Lauzurica, Sara
  • Morales Furio, Miguel
  • Molpeceres Alvarez, Carlos
  • Tom, Thomas
  • Asensi, José Miguel
  • Bertomeu Balagueró, Joan
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • López González, Juan Miguel|||0000-0002-5718-5101
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
An alternative to the use of amorphous silicon (a-Si:H) in silicon heterojunction (SHJ) solar cells are transition metal oxide (TMO) films. TMOs act as passivators and as selective contacts, i.e. hole transport layers (HTL) or electron transport layers (ETL). Due to their chemical properties these oxides act as transparent contacts with semiconducting properties. Three TMOs, molybdenum oxide, vanadium oxide, and tungsten oxide, show good properties for use as p-type front contacts for n-type crystalline silicon heterojunction solar cells. In this work we show a complete study of the laser removal of WOx, VOx and MoOx films deposited on crystalline silicon using laser sources of three different wavelengths (355 nm, 532 nm, and 1064 nm) and in two temporal regimes in pulse width (picoseconds and nanoseconds). We measure the fluence threshold to remove TMO film, and the threshold to induce damage in the substrate, allowing us to calculate the parametric window of the process. We also studied the relation between crater dimensions and ablation parameters. Complete removal of the three different TMO films has been achieved without damage to the silicon substrate. The results of diode isolation and their electrical characteristics are also included, showing the quality of the laser isolation processes., Partial financial support has been provided by the Spanish Ministry of Science and Innovation under the projects CHENOC (ENE2016–78933-C4–1-R and ENE2016–78933-C4–4-R) and SCALED (PID2019109215RB-C41 and PID2019–109215RB-C44)., Peer Reviewed, 7 - Energia Assequible i No Contaminant
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Textured PDMS films applied to thin crystalline silicon solar cells

  • Rosell, Arnau
  • Martín García, Isidro
  • Garin Escriva, Moises
  • López Rodríguez, Gema
  • Alcubilla González, Ramón
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Front surface texturization is a standard procedure used to improve optical properties of photovoltaic devices. In some particular cases, such as when dealing with ultrathin substrates, common texturization techniques can become unpractical or even unfeasible. Texturized polymer films applied on top of such devices may be used as an alternative. In this article, we report on the development of textured polydimethylsiloxane (PDMS) films to be placed on top of planar crystalline silicon solar cells based on thin substrates (=40 µ m). The PDMS polymer is deposited onto a rough surface (conventional random pyramid textured silicon), cured and detached from it. By scanning electron microscope images, we demonstrate that the dilution of PDMS into toluene helps in a better replica of the master surface. Next, we apply the optimized PDMS films on top of dummy samples based on 10, 20, and 40 µm thick crystalline silicon (c-Si) substrates whose reflectance is significantly reduced after placing the PDMS films. Accurate optical simulations indicate that the optical improvement comes from three mechanisms: higher light transmission into the device, lower reflectance at the c-Si surface, and better light trapping properties at the thin c-Si absorber. Experimental verification of the optical improvement with texturized PDMS films is reported based on 40 µ m thick solar cell, where a short-circuit current density gain of 1.7 mA/cm 2 is observed., This work was funded by MINECO from Spanish government under projects TEC2017-82305-R, ENE2016-78933-C4-1-R, ENE2017-87671-C3-2-R. The work was also supported in part by project REFER COMRDI15-1-0036 funded by ACCIÓ and the European Regional Development Fund (FEDER)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Electron selective contacts based on Al2O3/TiO2/ZnO stacks for crystalline silicon solar cells

  • Zafoschnig, Lisa
  • Ortega Villasclaras, Pablo Rafael
  • Martín García, Isidro
  • Masmitjà Rusiñol, Gerard
  • López Rodríguez, Gema
  • Alcubilla González, Ramón
In the last years, our research group has focused on the development of Interdigitated Back Contacted (IBC) solar cells based on transition metal oxides. In particular, a very thin Al2O3/TiO2 stack deposited by ALD has demonstrated excellent results. The point of this work is to try to develop a transparent conductive oxide that could be inserted in between the passivating layers and the metal contact in order to improve rear reflector properties. As a good candidate, we focus on Zinc Oxide (ZnO) deposited from DEZ (Ditehylzinc) and water as gas precursors. A deposition rate of 1.76 A/cycle is found for layers deposited at 125 ºC indicating a self-limited reaction, i.e. atomic layer deposition process. This film has an optical band gap of 3.26 eV demonstrating good optical properties to work as a back reflector. Unfortunately, contact quality with these layers is very poor. In order to investigate the origin of such a poor performance, we measure ZnO workfunction by Scanning Kelvin Probe resulting in 4.85 eV. This value suggests that the developed ZnO films could work better in a hole selective contact. To demonstrate this point, contacts on MoOx layers were fabricated leading to reasonable contact resistance values of 43 mohmscm. Passivation properties of these contacts will be addressed in the future in order to consider their introduction into the final IBC solar cell., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Origin of the negative differential resistance in the output characteristics of a picene-based thin-film transistor

  • Ros Costals, Eloi
  • Puigdollers i González, Joaquim
  • Ortega Villasclaras, Pablo Rafael
  • Voz Sánchez, Cristóbal
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this work, we have fabricated and studied p-type picene thin-film transistors. Although the devices exhibited good electrical performance with high field-effect mobility (up to 1.3 cm 2 /V·s) and on/off ratios above 10 5 , the output electric characteristics of the devices exhibited a Negative Differential Resistance for higher drain-source voltage. Finally, a possible explanation for this phenomenon is developed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Near 5% DMSO is the best: a structural investigation of PEDOT: PSS thin films with strong emphasis on surface and interface for hybrid solar cell

  • Mahato, Somnath
  • Puigdollers i González, Joaquim
  • Voz Sánchez, Cristóbal
  • Mukhopadhyay, Mala
  • Mukherjee, Manabendra
  • Hazra, Satyajit
© 2019 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Effect of dimethyl sulfoxide (DMSO) doping on poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) thin films have been optimized for obtaining better hole transport layer in hybrid solar cell. The correlation between morphology and conductivity is established through atomic force microscopy and transmission length method measurements. On the other hand, change in the shape of the building blocks (from spheroidal-like to ellipsoidal-like) in the PEDOT:PSS films with DMSO concentration is apparent from their electron density profiles and topographies, suggesting possible conformational change (from coil-like to rod-like) in film by X-ray reflectivity. Such change is further evident from their compositional profiles, work functions and electronic band structures estimated from X-ray and ultraviolet photoelectron spectroscopies. In fact, complementary information suggest that near 5% DMSO doped PEDOT:PSS film is governed through maximum in-plane extended ellipsoidal-like blocks as well as well-organized in out-of-plane ordering which is likely to be the optimum structure for increased the highest electrical conductivity up to 1230¿S/cm. Finally, maximum power conversion efficiency of 11% with open-circuit voltages around 600¿mV, a short-circuit current density higher than 30¿mA/cm2 and a fill factor of 59.4% is achieved for the 5% DMSO doped PEDOT:PSS/n-Si hybrid solar cell, which is perfectly correlated with their structure., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Influence of co-sputtered Ag:Al ultra-thin layers in transparent V2O5/Ag:Al/AZO hole-selective electrodes for silicon solar cells

  • Tom, Thomas
  • Ros Costals, Eloi
  • Asensi López, José Miguel
  • Andreu Batallé, Jordi
  • Bertomeu Balagueró, Joan
  • Puigdollers i González, Joaquim
  • Voz Sánchez, Cristóbal
  • López-Pintó, Nicolau
As optoelectronic devices continue to improve, control over film thickness has become crucial, especially in applications that require ultra-thin films. A variety of undesired effects may arise depending on the specific growth mechanism of each material, for instance a percolation threshold thickness is present in Volmer-Webber growth of materials such as silver. In this paper, we explore the introduction of aluminum in silver films as a mechanism to grow ultrathin metallic films of high transparency and low sheet resistance, suitable for many optoelectronic applications. Furthermore, we implemented such ultra-thin metallic films in Dielectric/Metal/Dielectric (DMD) structures based on Aluminum-doped Zinc Oxide (AZO) as the dielectric with an ultra-thin silver aluminum (Ag:Al) metallic interlayer. The multilayer structures were deposited by magnetron sputtering, which offers an industrial advantage and superior reliability over thermally evaporated DMDs. Finally, we tested the optimized DMD structures as a front contact for n-type silicon solar cells by introducing a hole-selective vanadium pentoxide (V2O5) dielectric layer., This research has been supported by the Spanish Ministerio de Economía, Industria y Competitividad and the European Regional Development Fund through the projects ENE2016-78933-C4-1-R, ENE2016-78933-C4-2-R, PID2019-109215RB-C41, PID2019-1092215RB-C43 and ENE2017-87671-C3-2-R. We acknowledge support of Secretaria d’Universitats i Recerca de la Generalitat de Catalunya and European Social Fund (2019 FI_B 00456)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A self-branched lamination of hierarchical patronite nanoarchitectures on carbon fiber cloth as novel electrode for ionic liquid electrolyte-based high energy density supercapacitors

  • Manikandan, Ramu
  • Justin Raj, Chellan
  • Nagaraju, Goli
  • Puigdollers i González, Joaquim
  • Voz Sánchez, Cristóbal
This is the peer reviewed version of the following article: Ramu, M., Chellan, J. R., Goli, N., Joaquim, P., Cristobal, V., Kim, B. C., A Self‐Branched Lamination of Hierarchical Patronite Nanoarchitectures on Carbon Fiber Cloth as Novel Electrode for Ionic Liquid Electrolyte‐Based High Energy Density Supercapacitors. Adv. Funct. Mater. 2019, 1906586. https://doi.org/10.1002/adfm.201906586, which has been published in final form at https://doi.org/10.1002/adfm.201906586. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., The developments of rationally designed binder-free metal chalcogenides decorated flexible electrodes are of paramount importance for advanced energy storage devices. Herein, binder-free patronite (VS4) flower-like nanostructures are facilely fabricated on a carbon cloth (CC) using a facile hydrothermal method for high-performance supercapacitors. The growth density and morphology of VS4 nanostructures on CC are also controlled by varying the concentrations of vanadium and sulfur sources along with the complexing agent in the growth solution. The optimal electrode with an appropriate growth concentration (VS4-CC@VS-3) demonstrates a considerable pseudocapacitance performance in the ionic liquid (IL) electrolyte (1-ethyl-3-methylimidazolium trifluoromethanesulfonate), with a high operating potential of 2 V. Utilizing VS4-CC@VS-3 as both positive and negative electrodes, the IL-based symmetric supercapacitor is assembled, which demonstrates a high areal capacitance of 536 mF cm-2 (206 F g-1) and excellent cycling durability (93%) with superior energy and power densities of 74.4 µWh cm-2 (28.6 Wh kg-1) and 10154 µW cm-2 (9340 W kg-1), respectively. As for the high energy storage performance, the device stably energizes various portable electronic applications for a long time, which make the fabricated composite material open up news for the fabrication of fabrics supported binder-free chalcogenides for high-performance energy storage devices., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Deposition and characterisation of sputtered molybdenum oxide thin films with hydrogen atmosphere

  • López-Pintó, Nicolau
  • Tom, Thomas
  • Bertomeu Bo, Joan
  • Asensi López, José Miguel
  • Ros Costals, Eloi
  • Ortega Villasclaras, Pablo Rafael
  • Voz Sánchez, Cristóbal
Sputtered films of reduced molybdenum oxide (MoOx) with a molybdenum trioxide target in different pressures and atmospheres were deposited in varying temperatures. Compositional, optic, and electric characteristics of the samples were studied. X-ray photoelectron spectroscopy revealed reduced states when working in the hydrogen + argon atmosphere implying that stoichiometry could be controlled by adding some hydrogen in the sputtering chamber. The effect of slightly increasing the substrate temperature during deposition was also studied and lead to the presence of metastable Mo4+ states at 3 mTorr. Optical properties match the ones already in the literature, and transmittances of 90% were achieved. The results support sputtering as a viable method of depositing MoOx films apart from thermal evaporation for many applications., This research has been supported by the Spanish Ministerio de Economía, Industria y Competitividad (ENE2016-78933-C4-1-R and ENE2016-78933-C4-2-R), Ministerio de Ciencia e Innovación (PID2019-109215RB-C4-1 and PID2019-109215RB-C4-3) and the European Regional Development Fund. One of the authors (T. Tom) acknowledges the support of the Secretaria d'Universitats i Recerca de la Generalitat de Catalunya and European Social Fund (2019 FI_B 00456)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Origin of the negative differential resistance in the output characteristics of a picene-based thin-film transistor

  • Ros, Eloi
  • Puigdollers i González, Joaquim
  • Ortega Villasclaras, Pablo Rafael
  • Voz Sánchez, Cristóbal
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this work, we have fabricated and studied p-type picene thin-film transistors. Although the devices exhibited good electrical performance with high field-effect mobility (up to 1.3 cm2/V¿s) and on/off ratios above 105, the output electric characteristics of the devices exhibited a Negative Differential Resistance for higher drain-source voltage. Finally, a possible explanation for this phenomenon is developed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Influence of a gold seed in transparent V2Ox/Ag/V2Ox selective contacts for dopant-free silicon solar cells

  • Nguyen, Hieu Trung
  • Ros Costals, Eloi
  • Bertomeu Balaguero, Joan
  • Asensi López, José Miguel
  • Andreu Batallé, Jordi
  • Martín García, Isidro
  • Ortega Villasclaras, Pablo Rafael
  • Garin Escriva, Moises
  • Puigdollers i González, Joaquim
  • Voz Sánchez, Cristóbal
  • Alcubilla González, Ramón
  • Tom, Thomas
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Dielectric/metal/dielectric structures based on vanadium pentoxide with a thin silver interlayer have been optimized to replace traditional transparent electrodes. As would be expected, there is a tradeoff in the metal thickness to achieve high transparency and low sheet resistance simultaneously. It has been demonstrated that an ultra-thin gold seed prevents the tendency of silver to form clusters. This wetting effect reduces the metal thickness needed to form a continuous film, which leads to a higher averaged transmittance and very low sheet resistance. On the other hand, vanadium pentoxide on silicon forms a high-quality hole-selective contact. Thus, these structures can be used as an all-in-one transparent electrode and selective contact for a new kind of heterojunction solar cells. This concept has been proved in a 13.3% efficient solar cell fabricated on n-type silicon wafers. Besides being dopant-free, the complete fabrication route did not require any sputtered transparent electrode., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Transport mechanisms in silicon heterojunction solar cells with molybdenum oxide as a hole transport layer

  • García Hernansanz, Rodrigo
  • Garcia Hemme, E.
  • Montero, D.
  • Olea Ariza, Javier
  • Prado Millán, Álvaro del
  • Martil, Ignacio
  • Voz Sánchez, Cristóbal
  • Gerling Sarabia, Luis Guillermo
  • Puigdollers i González, Joaquim
  • Alcubilla González, Ramón
© <2018>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Heterojunction solar cells based on molybdenum sub-oxide (MoOx) deposited on n-type crystalline silicon have been fabricated. The hole selective character of MoOx is explained by its high workfunction, which causes a strong band bending in the Si substrate. This bending pushes the surface into inversion. In addition, the sub-stoichiometry of the evaporated MoOx layers leads to a high density of states within the bandgap. This is crucial for charge transport. The J-V electrical characteristics at several temperatures were analysed to elucidate the dominant charge transport mechanisms of this heterojunction structure. We have identified two different transport mechanisms. At low bias voltage, transport is dominated by hole tunnelling through the MoOx gap states. At higher voltage the behaviour is similar to a Schottky junction with a high barrier value, due to the high MoOx work function. These results provide a better understanding of the hole selective character of MoOx/n-type silicon heterocontacts, which is key to further improve this new kind of solar cells., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

LIFT front-contact metallization of silicon solar cells

  • Canteli, David
  • Muñoz García, Cristina
  • Ortega Villasclaras, Pablo Rafael
  • Ros Costals, Eloi
  • Morales, Miguel
  • Lauzurica, Sara
  • Voz Sánchez, Cristóbal
  • Molpeceres Alvarez, Carlos
© 2021 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Laser-Induced Forward Transfer (LIFT) is a very versatile technique, allowing the selective transfer of a wide range of materials with no contact and high accuracy. This work includes the analysis of heterojunction silicon solar cells with the frontal grid deposited by LIFT, and the electric characterization of the deposited lines., Partial financial support for this work has been provided by the Spanish Ministry of Science and Innovation under the projects CHENOC (ENE2016-78933-C4-1-R and ENE2016-78933-C4-4-R) and SCALED (PID2019-109215RBC41 and PID2019-109215RB-C44)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Selective laser ablation of transition metal oxide thin films for SHJ solar cells

  • Muñoz García, Cristina
  • Canteli, David
  • Lauzurica, Sara
  • Morales Furio, Miguel
  • Molpeceres Alvarez, Carlos
  • Tom, Thomas
  • Asensi, José Miguel
  • Bertomeu Balagueró, Joan
  • Ros Costals, Eloi
  • Ortega Villasclaras, Pablo Rafael
  • López González, Juan Miguel
  • Voz Sánchez, Cristóbal
An alternative to the use of amorphous silicon (a-Si:H) in silicon heterojunction (SHJ) solar cells are transition metal oxide (TMO) films. TMOs act as passivators and as selective contacts, i.e. hole transport layers (HTL) or electron transport layers (ETL). Due to their chemical properties these oxides act as transparent contacts with semiconducting properties. Three TMOs, molybdenum oxide, vanadium oxide, and tungsten oxide, show good properties for use as p-type front contacts for n-type crystalline silicon heterojunction solar cells. In this work we show a complete study of the laser removal of WOx, VOx and MoOx films deposited on crystalline silicon using laser sources of three different wavelengths (355 nm, 532 nm, and 1064 nm) and in two temporal regimes in pulse width (picoseconds and nanoseconds). We measure the fluence threshold to remove TMO film, and the threshold to induce damage in the substrate, allowing us to calculate the parametric window of the process. We also studied the relation between crater dimensions and ablation parameters. Complete removal of the three different TMO films has been achieved without damage to the silicon substrate. The results of diode isolation and their electrical characteristics are also included, showing the quality of the laser isolation processes., Partial financial support has been provided by the Spanish Ministry of Science and Innovation under the projects CHENOC (ENE2016–78933-C4–1-R and ENE2016–78933-C4–4-R) and SCALED (PID2019109215RB-C41 and PID2019–109215RB-C44)., Peer Reviewed, 7 - Energia Assequible i No Contaminant, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Patterning of WOx, VOx, and MoOx thin-films with picosecond and nanosecond laser sources

  • Muñoz García, Cristina
  • Canteli, David
  • Lauzurica, Sara
  • Morales Furio, Miguel
  • Molpeceres Alvarez, Carlos
  • Ros Costals, Eloi
  • Ortega Villasclaras, Pablo Rafael
  • López González, Juan Miguel
  • Voz Sánchez, Cristóbal
© 2022 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Transition metal oxide (TMOs) layers have interesting properties as selective contacts, i.e., hole or electron transport layers for novel semiconductor devices. Especially, oxides of molybdenum (MoO3), vanadium (V2O5), and tungsten (WO3) show good bahaviour acting as front hole-selective contacts for n-type crystalline-silicon heterojunction solar cells. Laser scribing has been widely used for thin-film ablation and seems the appropriate technology for device manufacturing with such non-conventional materials. In this work, we study the laser scribing of non-stoichiometric evaporated WOx, VOx, and MoOx films with three different wavelengths (1064, 532, and 355 nm) with pulse duration in the nanosecond and picosecond regimes. The selection of the proper laser source allows a wide parametric window, with complete removal of the TMO films and no alteration of the silicon substrate. The results on the isolation of diodes and their electrical characteristics show the quality of the laser scribing processes., Partial financial support has been provided by the Spanish Ministry of Science and Innovation under the projects CHENOC (ENE2016–78933-C4–1-R and ENE2016– 78933-C4–4-R) and SCALED (PID2019–109215RB-C41 and PID2019–109215RB-C44)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Shedding light on the negative differential resistance effect observed in organic thin-film transistors

  • Ros Costals, Eloi
  • Reig Canyelles, Marta
  • Voz Sánchez, Cristóbal
  • Bagdziunas, Gintautas
  • Ortega Villasclaras, Pablo Rafael
  • Velasco Castrillo, Maria Dolores
  • Puigdollers i González, Joaquim
This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in ACS Applied Electronic Materials, copyright © American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/full/10.1021/acsaelm.0c00183, Organic semiconductor electronics has the potential to become a solid and industrially feasible technology, with new and stimulating applications such as the flexible and transparent electronic devices. However, organic devices still have some drawbacks that must be solved to assure quality and reliability in complex electronic systems. In this work, we focus our attention to the physical origin involved in the negative differential resistance phenomenon, often observed in the output electrical characteristics of organic thin-film transistors but rarely analyzed., This work was supported by the Spanish Government throughProjects ENE2016-78933-C4-1-R, ENE2017-87671-C3-2-R,and TEC2017-82305-R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Satisfying both interfacial- and bulk requirements for organic photovoltaics: Bridged-triphenylamines with extended p-conjugated systems as efficient new molecules

  • Simokaitiene, Jurate
  • Cekaviciute, Monika
  • Volyniuk, Dmytro
  • Voz Sánchez, Cristóbal
  • Puigdollers i González, Joaquim
© <2019> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In the domain of organic photovoltaic (OPV) devices, the design of new materials faces the extraordinary challenge to satisfy two opposite requirements: the new materials should exhibit weak intermolecular interactions at the donor-acceptor interface, but strong intermolecular interactions and good charge transport properties in the bulk. In an effort to progress in this direction, here we present three new diphenylethenyl substituted derivatives of methylene-bridged triphenylamine, synthesized by condensation of dimethylmethylene-bridged triphenylamines with 2,2-diphenylacetaldehyde. The synthesized compounds were found to be capable of glass formation with glass transition temperatures in the range of 65–130¿°C. The ionization potentials of these derivatives were found to be in the range of 5.29–5.68¿eV. The time-of-flight hole drift mobilities measured at room temperature well exceeded 10-2¿cm [2]/Vs for all the synthesized compounds. By combining the compounds with fullerene C70 acceptor in bilayer organic solar cells, a power conversion efficiency of 1.9% was obtained. Density functional methods-based calculations indicate that this result can be explained by considering edge-on orientations at the donor-acceptor interface. In this case, the designed architecture of the compounds has an effect to sufficiently “hide” the donor HOMO from a direct and easy contact with C70 LUMO(s), thus maintaining low level of geminate donor-acceptor charge recombination, without losing hole-transport properties in the donor bulk. These two design strategies operate consequently in different parts of the molecules, which is central to the success of the new compounds. Our study shows consequently a possible strategy for a simultaneous improvement of both interfacial- and bulk properties of molecules for OPV applications., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Low-cost high-sensitive suns-Voc measurement instrument to characterize c-Si solar cells

  • Ortega Villasclaras, Pablo Rafael
  • Piñol, Juan M.
  • Martín García, Isidro
  • Orpella García, Alberto
  • Masmitjà Rusiñol, Gerard
  • López Rodríguez, Gema
  • Ros Costals, Eloi
  • Voz Sánchez, Cristóbal
  • Puigdollers i González, Joaquim
  • Alcubilla González, Ramón
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Measuring open-circuit voltage (Voc) vs. light intensity (Suns) in solar cells permits the access of cell performance without the series resistance effect. This work shows the implementation of a Suns-Voc measurement system which consists of an off-the-shelf photograph flash-lamp, a digital oscilloscope and a specifically designed photodetector board with three silicon photodiodes that covers a light intensity measurement range from 10-5 to 102 suns. The whole system is controlled via USB ports from a personal computer allowing the measurement of cell characteristics (pseudo-dark and pseudo-light current density-voltage curves, as well as the pseudo fill factor and pseudo efficiency) automatically in a very short time., This work was supported in part by the Spanish Government under a FPU grant (FPU13/04381), and projects ENE2016-78933-C4-1-R, ENE2017-87671-C3-2-R and TEC2017-82305-R. The work was also supported in part by the project REFER COMRDI15-1-0036 funded by ACCIÓ and the European Regional Development Fund (FEDER). The authors wish to thank Mr. Miguel Garcia for its help in the mechanical and electrical photodetector interface development., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Observation of photovoltaic effect within locally doped silicon nanojunctions using conductive probe AFM

  • Khoury, R.
  • Alvarez, José
  • Ohashi, T.
  • Martín García, Isidro
  • Ortega Villasclaras, Pablo Rafael
  • López Rodríguez, Gema
  • Jin, Chen
  • Li, J.
  • Rusli, E.
  • Bulkin, P.
  • Johnson, E. V.
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Localized p-doped nanojunctions (200–300 nm in diameter) were formed in n-type crystalline silicon substrates and were characterized using scanning electron microscopy (SEM) and conductive-probe atomic force microscopy (C-AFM). Localized doping was performed by diffusion through sub-micron sized holes in a silicon-oxide mask defined using self-organized polystyrene nanoparticles. After oxide removal, a significant brightness contrast in the SEM top and side view images strongly suggested the successful local doping of these areas. Furthermore, local current-voltage measurements performed by C-AFM revealed an open circuit voltage and a short-circuit current only in the areas defined as nanojunctions. This photovoltaic effect is driven by the laser used to control cantilever deflection in the AFM., We acknowledge the financial support of the InnoEnergy PhD School Program and the European Institute of Technology (EIT). This work was partially funded by the Spanish government under projects TEC2017-82305-R, ENE2016-78933-C4-1-R and ENE2017-87671-C3-2-R, and by the Agence Nationale de la Recherche through the ANR project “APOCALYPSO” (ANR-13- PRGE-0003-01)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Germanium photovoltaic cells with MoO x hole-selective contacts

  • Alcañiz, A.
  • López Rodríguez, Gema
  • Martín García, Isidro
  • Jiménez Pagán, Alba
  • Datas Medina, Alejandro
  • Calle, Eric
  • Ros Costals, Eloi
  • Gerling Sarabia, Luis Guillermo
  • Voz Sánchez, Cristóbal
  • del Cañizo Nadal, Carlos
  • Alcubilla González, Ramón
© <2019> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Very thin, thermally evaporated MoOx (x¿<¿3) layer has been used as transparent hole-selective contact on an n-type Germanium substrate to effectively demonstrate PV conversion capability. The fabricated MoOx/Ge heterojunction PV cell shows a photocurrent density of 44.8¿mA/cm2 under AM1.5G illumination, which is comparable to that of conventional Ge PV cells. However, a low open-circuit voltage of 138¿mV is obtained, which might be explained by the presence of tunnelling mechanisms through the MoOx/Ge interface. To our knowledge, this is the first demonstration of a hole-selective contact made of transition metal oxide on an n-type semiconductor different from c-Si. Thus, this work may have important implications toward the development of new device architectures, such as novel low-cost Ge PV cells with possible applications in multijunction solar cells and thermophotovoltaics., Peer Reviewed, Postprint (author's final draft)