Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermal Emission of Silicon at Near-Infrared Frequencies Mediated by Mie Resonances

  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • RAMIRO MANZANO, FERNANDO
  • GARÍN ESCRIVÁ, MOISÉS
  • Alcubilla, R.
[EN] Planck's law constitutes one of the cornerstones in physics. It explains the well-known spectrum of an ideal blackbody consisting of a smooth curve, whose peak wavelength and intensity depend on the temperature of the body. This scenario changes drastically, however, when the size of the emitting object is comparable to the wavelength of the emitted radiation. Here we show that a silicon microsphere (2-3 mu m in diameter) heated to around 800 degrees C yields a thermal emission spectrum consisting of pronounced peaks that are associated with Mie resonances. We experimentally demonstrate in the near-infrared the existence of modes with an ultrahigh quality factor, Q, of 400, which is substantially higher than values reported so far, and set a new benchmark in the field of thermal emission. Simulations predict that the thermal response of the microspheres is very fast, about 15 mu s. Additionally, the possibility of achieving light emission above the Planck limit at some frequency ranges is envisaged., This work was supported by several projects of the Spanish Ministry of Economy and Competitiveness (MINECO), Severo Ochoa program for Centers of Excellence (SEV-2016-0683), MAT2015-69669-PM, ENE2013-49984-EXP, ENE2015-74009-JIN (cofunded by the European Regional Development Fund), and of the Spanish Science, Innovation and Universities, PGC2018-099744-B-100. F.R.-M. thanks the financial contribution of MINECO through the program for young researchers support, TEC 2015 2015-74405-JIN. The authors greatly acknowledge the contribution of Prof. Francisco Meseguer for both the fruitful discussions and the revision of the manuscript, and Prof. Marie Louise McCarrey for careful proofreading of the manuscript.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Direct etching at the nanoscale through nanoparticle-directed capillary condensation

  • Garín, Moisés
  • Khoury, Rasha
  • Martín García, Isidro|||0000-0001-8833-9057
  • Johnson, Erik
We report a method to locally deliver a chemical etchant at the nanoscale in the vapor phase by capillary condensation forming a meniscus at the nanoparticle/substrate interface. The process is simple, scalable and does not require functionalization of the nanoparticles. Furthermore, it does not rely on any specific chemical properties of the materials other than the solution being aqueous and the wettability properties of the surfaces involved, which should enable its application to other material and chemical combinations. In particular, in this work we demonstrate the proposed process by periodically pattering a SiO2 layer using a self-assembled monolayer of polystyrene particles exposed to HF vapors. The patterned SiO2 layer is then used as a mask to etch a pattern of inverted nanopyramids on Si. The silicon nanopatterning has been demonstrated for particles sizes ranging from 800 nm down to 100 nm, providing pyramids with a size down to 50 nm for 100 nm nanoparticles., This work has been financially supported by the following projects: ENE2015-74009-JIN funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Regional Development Fund (ERDF-EU), TEC2017-82305-R (MINECO), the InnoEnergy PhD School Programme and the European Institute of Technology (EIT)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Black silicon back-contact module with wide light acceptance angle

  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Garín, Moisés
  • von Gastrow, Guillaume
  • Carrió Díaz, David
  • Alcubilla González, Ramón|||0000-0003-4827-4513
This is the peer reviewed version of the following article: Ortega, P, Garín, M, von Gastrow, G, et al. Black silicon back‐contact module with wide light acceptance angle. Prog Photovolt Res Appl. 2019; 1– 7, which has been published in final form at https://doi.org/10.1002/pip.3231. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving, In this work, a photovoltaic mini-module combining interdigitated back-contacted solar cells with black silicon in the front was implemented as a proof of concept. The module consists of nine solar cells connected in series with an active area of 86.5 cm2. Both the assembly and panel encapsulation were made using industrial back-contact module technology. Noticeable photovoltaic efficiencies of 18.1% and 19.9% of the whole module and the best individual cell of the module, respectively, demonstrate that fragile nanostructures can withstand standard module fabrication stages. Open-circuit voltage and fill factor values of 5.76 V and 81.6%, respectively, reveal that series interconnection between cells works as expected, confirming a good ohmic contact between cell busbars and the conductive backsheet. Additionally, the excellent quasi-omnidirectional antireflection properties of black silicon surfaces prevail at module level, as it is corroborated by light incidence angle dependence measurements of the short-circuit current parameter., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Influence of a gold seed in transparent V2Ox/Ag/V2Ox selective contacts for dopant-free silicon solar cells

  • Nguyen, Hieu Trung
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Bertomeu Balaguero, Joan
  • Asensi López, José Miguel
  • Andreu Batallé, Jordi
  • Martín García, Isidro|||0000-0001-8833-9057
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Garin Escriva, Moises|||0000-0003-1309-7457
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Alcubilla González, Ramón|||0000-0003-4827-4513
  • Tom, Thomas
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Dielectric/metal/dielectric structures based on vanadium pentoxide with a thin silver interlayer have been optimized to replace traditional transparent electrodes. As would be expected, there is a tradeoff in the metal thickness to achieve high transparency and low sheet resistance simultaneously. It has been demonstrated that an ultra-thin gold seed prevents the tendency of silver to form clusters. This wetting effect reduces the metal thickness needed to form a continuous film, which leads to a higher averaged transmittance and very low sheet resistance. On the other hand, vanadium pentoxide on silicon forms a high-quality hole-selective contact. Thus, these structures can be used as an all-in-one transparent electrode and selective contact for a new kind of heterojunction solar cells. This concept has been proved in a 13.3% efficient solar cell fabricated on n-type silicon wafers. Besides being dopant-free, the complete fabrication route did not require any sputtered transparent electrode., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Direct etching at the nanoscale through nanoparticle-directed capillary condensation

  • Garín, Moisés
  • Khoury, Rasha
  • Martín García, Isidro
  • Johnson, Erik
We report a method to locally deliver a chemical etchant at the nanoscale in the vapor phase by capillary condensation forming a meniscus at the nanoparticle/substrate interface. The process is simple, scalable and does not require functionalization of the nanoparticles. Furthermore, it does not rely on any specific chemical properties of the materials other than the solution being aqueous and the wettability properties of the surfaces involved, which should enable its application to other material and chemical combinations. In particular, in this work we demonstrate the proposed process by periodically pattering a SiO2 layer using a self-assembled monolayer of polystyrene particles exposed to HF vapors. The patterned SiO2 layer is then used as a mask to etch a pattern of inverted nanopyramids on Si. The silicon nanopatterning has been demonstrated for particles sizes ranging from 800 nm down to 100 nm, providing pyramids with a size down to 50 nm for 100 nm nanoparticles., This work has been financially supported by the following projects: ENE2015-74009-JIN funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Regional Development Fund (ERDF-EU), TEC2017-82305-R (MINECO), the InnoEnergy PhD School Programme and the European Institute of Technology (EIT)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Black silicon back-contact module with wide light acceptance angle

  • Ortega Villasclaras, Pablo Rafael
  • Garín, Moisés
  • von Gastrow, Guillaume
  • Carrió Díaz, David
  • Alcubilla González, Ramón
This is the peer reviewed version of the following article: Ortega, P, Garín, M, von Gastrow, G, et al. Black silicon back‐contact module with wide light acceptance angle. Prog Photovolt Res Appl. 2019; 1– 7, which has been published in final form at https://doi.org/10.1002/pip.3231. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving, In this work, a photovoltaic mini-module combining interdigitated back-contacted solar cells with black silicon in the front was implemented as a proof of concept. The module consists of nine solar cells connected in series with an active area of 86.5 cm2. Both the assembly and panel encapsulation were made using industrial back-contact module technology. Noticeable photovoltaic efficiencies of 18.1% and 19.9% of the whole module and the best individual cell of the module, respectively, demonstrate that fragile nanostructures can withstand standard module fabrication stages. Open-circuit voltage and fill factor values of 5.76 V and 81.6%, respectively, reveal that series interconnection between cells works as expected, confirming a good ohmic contact between cell busbars and the conductive backsheet. Additionally, the excellent quasi-omnidirectional antireflection properties of black silicon surfaces prevail at module level, as it is corroborated by light incidence angle dependence measurements of the short-circuit current parameter., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Influence of a gold seed in transparent V2Ox/Ag/V2Ox selective contacts for dopant-free silicon solar cells

  • Nguyen, Hieu Trung
  • Ros Costals, Eloi
  • Bertomeu Balaguero, Joan
  • Asensi López, José Miguel
  • Andreu Batallé, Jordi
  • Martín García, Isidro
  • Ortega Villasclaras, Pablo Rafael
  • Garin Escriva, Moises
  • Puigdollers i González, Joaquim
  • Voz Sánchez, Cristóbal
  • Alcubilla González, Ramón
  • Tom, Thomas
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Dielectric/metal/dielectric structures based on vanadium pentoxide with a thin silver interlayer have been optimized to replace traditional transparent electrodes. As would be expected, there is a tradeoff in the metal thickness to achieve high transparency and low sheet resistance simultaneously. It has been demonstrated that an ultra-thin gold seed prevents the tendency of silver to form clusters. This wetting effect reduces the metal thickness needed to form a continuous film, which leads to a higher averaged transmittance and very low sheet resistance. On the other hand, vanadium pentoxide on silicon forms a high-quality hole-selective contact. Thus, these structures can be used as an all-in-one transparent electrode and selective contact for a new kind of heterojunction solar cells. This concept has been proved in a 13.3% efficient solar cell fabricated on n-type silicon wafers. Besides being dopant-free, the complete fabrication route did not require any sputtered transparent electrode., Peer Reviewed, Postprint (author's final draft)