Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reconfigurable accelerator on FPGA for scientific computing: from a space-borne instrument to a high-performance computing data center: work-in-progress

  • Cobos Carrascosa, Juan Pedro
  • Hernández Expósito, David
  • Ramos Más, José Luis
  • Aparicio del Moral, Beatriz
  • Sánchez Gómez, A.
  • Balaguer Jiménez, M.
  • López Jiménez, A. C.
  • Orozco Suárez, David
  • Toro, José Carlos del
We present a scientific computing accelerator on FPGA that uses hundreds of processors working in parallel organized in several SIMD cores. The accelerator is installed within an Ethernet network and acts as a high-performance computing server. A prototype is presented for processing solar images and achieves a great performance that can compete with a cluster. © 2019 Copyright is held by the owner/author(s). Publication rights licensed to ACM., This work has been partially funded by the Spanish Ministerio de Ciencia, Innovación y Universidades, through Projects No.ESP2016-77548-C5-1-R and RTI2018-096886-B-C51, including a percentage from European FEDER funds. Authors also acknowledge financial support from the State Agency for Research of the Spanish MCIU through the >Center of Excellence Severo Ochoa> award to the Instituto de Astrofísica de Andalucía (SEV-2017-0709)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Image compression on reconfigurable FPGA for the SO/PHI space instrument

  • Hernández Expósito, David
  • Cobos Carrascosa, Juan Pedro
  • Ramos Más, José Luis
  • Rodríguez Valido, Manuel
  • Orozco Suárez, David
  • Hirzberger, J.
  • Woch, J.
  • Solanki, S.
  • Toro, José Carlos del
In this paper we present a novel FPGA implementation of the Consultative Committee for Space Data Systems Image Data Compression (CCSDS-IDC 122.0-B-1) for performing image compression aboard the Polarimetric Helioseismic Imager instrument of the ESA's Solar Orbiter mission. This is a System-On-Chip solution based on a light multicore architecture combined with an efficient ad-hoc Bit Plane Encoder core. This hardware architecture performs an acceleration of ~30 times with respect to a software implementation running into space-qualified processors, like LEON3. The system stands out over other FPGA implementations because of the low resource usage, which does not use any external memory, and of its configurability. © 2018 SPIE., This work has been partially funded by the Spanish Ministerio de Economia y Competitividad, through Project No. ESP2016-77548-C5-1-R, including a percentage from European FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The High Resolution Telescope (HRT) of the Polarimetric and Helioseismic Imager (PHI) onboard Solar Orbiter

  • Gandorfer, A.
  • Grauf, B.
  • Staub, J.
  • Bischoff, J.
  • Woch, J.
  • Hirzberger, J.
  • Solanki, S. K.
  • Álvarez-Herrero, A.
  • García Parejo, P.
  • Schmidt, W.
  • Volkmer, R.
  • Appourchaux, T.
  • Toro, José Carlos del
Solar Orbiter is a joint mission of ESA and NASA scheduled for launch in 2020. Solar Orbiter is a complete and unique heliophysics mission, combining remote sensing and in-situ analysis; its special elliptical orbit allows viewing the Sun from a distance of only 0.28 AU, and - leaving the ecliptic plane - to observe the solar poles from a hitherto unexplored vantage point. One of the key instruments for Solar Orbiter's science is the »Polarimetric and Helioseismic Imager» (PHI), which will provide maps of the solar surface magnetic fields and the gas flows on the visible solar surface. Two telescopes, a full disc imager, and a high resolution channel feed a common Fabry-Perot based tunable filter and thus allow sampling a single Fraunhofer line at 617.3 nm with high spectral resolution; a polarization modulation system makes the system sensitive to the full state of polarization. From the analysis of the Doppler shift and the magnetically induced Zeeman polarization in this line, the magnetic field and the line-of-sight gas motions can be detected for each point in the image. In this paper we describe the opto-mechanical system design of the high resolution telescope. It is based on a decentred Ritchey-Chrétien two-mirror telescope. The telescope includes a Barlow type magnifier lens group, which is used as in-orbit focus compensator, and a beam splitter, which sends a small fraction of the collected light onto a fast camera, which provides the error signals for the actively controlled secondary mirror compensating for spacecraft jitter and other disturbances. The elliptical orbit of the spacecraft poses high demands on the thermo-mechanical stability. The varying size of the solar disk image requires a special false-light suppression architecture, which is briefly described. In combination with a heat-rejecting entrance window, the optical energy impinging on the polarimetric and spectral analysis system is efficiently reduced. We show how the design can preserve the diffraction-limited imaging performance over the design temperature range of -20°C to +60°C. The decentred hyperbolical mirrors require special measures for the inter-alignment and their alignment with respect to the mechanical structure. A system of alignment flats and mechanical references is used for this purpose. We will describe the steps of the alignment procedure, and the dedicated optical ground support equipment, which are needed to reach the diffraction limited performance of the telescope. We will also report on the verification of the telescope performance, both - in ambient condition - and in vacuum at different temperatures. © COPYRIGHT SPIE., Solar Orbiter is a mission led by the European Space Agency (ESA) with signicant contribution from National Aeronautics and Space Administration (NASA). The SO/PHI instrument is supported by the German Aerospace Center (DLR) through grants 50 OT 1201 and 50 OT 1703 (for the ISS) and a grant from the Max Planck Society for Solar Orbiter instrument development. The Spanish contribution has been partly funded by the Spanish Research Agency under project ESP2016-77548-C5 and ESP2014-56169-C6, partially including European FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The quick RTE inversion on FPGA for DKIST

  • Cobos Carrascosa, Juan Pedro
  • Ramos Más, José Luis
  • Aparicio del Moral, Beatriz
  • Hernández Expósito, David
  • Sánchez Gómez, A.
  • Balaguer Jiménez, M.
  • López Jiménez, A. C.
  • Orozco Suárez, David
  • Toro, José Carlos del
In this contribution we present a multi-core system-on-chip, embedded on FPGA, for real-time data processing, to be used in the Daniel K. Inouye Solar Telescope (DKIST). Our system will provide "quick-look" magnetic field vector and line-of-sight velocity maps to help solar physicists to react to specific solar events or features during observations or to address specific phenomena while analyzing the data off line. The stand-alone device will be installed at the National Solar Observatory (NSO) Data Center. It will be integrated in the processing data pipeline through a software interface, and is competitive in computing speed to complex computer clusters. © 2018 SPIE., This work has been partially funded by the Spanish Ministerio de Economia y Competitividad, through Project No. ESP2016-77548-C5-1-R, including a percentage from European FEDER funds.