Skip to main content

MATERIALES AVANZADOS USANDO CARBONATO CALCICO BIOGENICO DE RESIDUOS DE CONCHAS MARINAS

PCI2020-112108

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos Programación Conjunta Internacional
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

One-step hydrothermal transformation of oyster shell calcium carbonate to nanocrystalline apatite biomaterials

  • Fernández-Penas, Raquel
  • Triunfo, Carla
  • Verdugo-Escamilla, Cristóbal
  • Gärtner, Stefanie
  • Cölfen, Helmut
  • Falini, Giuseppe
  • Gómez-Morales, Jaime
Comunicación oral en XXX simposio del Grupo Especializado de Cristalografía y Crecimiento Cristalino - GE3C. Benidorm, 17-19 enero 2023, Grant ref. PCI2020-112108 is funded by MCIN/AEI/10.13039/501100011033 (Spain) and the European Union "NextGenerationEU"/PRTR". PCI2020-112108 is part of the project CASEAWA of ERA-NET Cofund BlueBio H2020.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

One-pot hydrothermal transformation of seashell calcium carbonate waste to apatite and doped-apatite particles

  • Fernández-Penas, Raquel
  • Triunfo, Carla
  • Cano Plá, Sandra María
  • Verdugo-Escamilla, Cristóbal
  • Maoloni, Gabriele
  • Cölfen, Helmut
  • Falini, Giuseppe
  • Gómez-Morales, Jaime
Póster presentado en ISIC23. Glasgow (U.K.) 5-8 september 2023, Waste seashells from the fishery industry represent an important environmental issue. Its valorization by transforming the CaCO3 into apatite micro/nanoparticles may have a positive environmental impact besides an economic profitability since the global apatite market is expected to grow at 6.5% to around USD 3.086,05 million by 2027. Many of methods to transform biogenic CaCO3 into apatite particles are two-step processes involving calcination to CaO at 900-1000 °C followed by titration with a phosphate reagent (typically H3PO4). Here we present a one-step hydrothermal method using oyster shells Crassostrea gigas as model raw material. Shells were treated with NaClO 5% v/v, crushed, milled, and sieved (Ø<45 ¿m mesh), before submitting to hydrothermal conversion. Firstly, we explored the influences of KH2PO4 and K2HPO4, P/Ca molar ratios (0.24, 0.6, and 0.96), and temperature (25-200°C) in the transformation process. The minimum temperatures to obtain full transformation when using KH2PO4 and K2HPO4 for P/Ca molar ratios 0.6 (stoichiometric) were 160 ºC and 120ºC respectively, while for P/Ca ratios 0.96, they were 120 ºC and 80 ºC. The precipitates (Mg2+-doped carbonated-apatite micro/nanoparticles) are the result of a dissolution/re-precipitation mechanism driven by pH variation. Secondly, we explored the influence of osteogenic ions Mg2+, Mn2+, and Co2+ at P/Ca molar ratios 0.6. Full transformation of CaCO3 was obtained at 160 ºC, yielding platy-shaped apatite nanoparticles doped with either 0.22 mol% Mg2+, 0.012 mol% Mn2+, or 0.16 mol% Co2+, and sizes within the range 75-90 nm. Compared to the previous two-step processes, the one reported here is straightforward, one-pot, easily to scale up, and can be operated at relatively low temperatures without any pH adjustment., This work was supported by grant PCI2020-112108, funded by MCIN/AEI/10.13039 /501100011033 (Spain) and "NextGenerationEU"/PRTR" and is part of CASEAWA project (ERA-NET Cofund BlueBio H2020)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanocrystalline apatites doped with transition metals obtained by hydrothermal transformation of oyster shell waste

  • Cano Plá, Sandra María
  • Fernández Penas, Raquel
  • Triunfo, C.
  • Verdugo-Escamilla, Cristóbal
  • Maoloni, Gabriele
  • Cölfen, Helmut
  • Falini, G.
  • Gómez-Morales, Jaime
Póster presentado en 8th International School on Biological Crystallization: (ISBC2023), Granada, (Spain) in May 21-26, 2023, Waste seashells from the fishery industry represent an important environmental issue and, at the same time, a loss of potentially useful biomaterials [1]. They are biominerals made of CaCO3 and an organic matrix (1-5 wt.%) composed mainly of proteins and polysaccharides. The fabrication of functional calcium phosphates such as doped nanoapatites, using seashells as a calcium source, could partially alleviate the ecological problem associated with this type of waste [2]. In this work, the one-pot hydrothermal method [2] has been used to obtain biocompatible Mg2+-, Mn2+-, and Co2+-doped apatites since these metals have been shown to stimulate bone tissue regeneration [3-5]. The experiments were performed by heating aqueous suspensions composed of oyster shell CaCO3 particles (490 mM) plus 300 mM KH2PO4, in presence of 10 mM of metal (M= Mg2+, Mn2+, or Co2+), at temperatures ranging from 25 ¿C to 200 ¿C. Full transformation of CaCO3 particles was achieved at 160 ¿C, resulting in M-doped, platy-shaped apatite nanoparticles, and sizes within the range of 75-90 nm. When incubated with human mesenchymal stem cells for 1 and 3 days, all samples showed high cytocompatibility/biocompatibility, with only a small decrease in cell viability after 7 days of incubation at dose-dependent concentrations. Overall, this method shows promise in the preparation of biocompatible doped-apatite nanocrystals with osteogenic features, utilizing biogenic CaCO3 as an unexplored calcium source for the preparation of apatite-based biomaterials. Acknowledgements: Grant ref. PCI2020-112108 is funded by MCIN/AEI/10.13039 /501100011033 (Spain) and the European Union ¿NextGenerationEU¿/PRTR¿. PCI2020-112108 is the Spanish part of the project CASEAWA of ERA-NET Cofund BlueBio H2020., Acknowledgements: Grant ref. PCI2020-112108 is funded by MCIN/AEI/10.13039 /501100011033 (Spain) and the European Union “NextGenerationEU”/PRTR”. PCI2020-112108 is the Spanish part of the project CASEAWA of ERA-NET Cofund BlueBio H2020.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Magnesium, manganese and cobalt substituted nanocrystalline apatites obtained by hydrothermal transformation of biogenic calcium carbonate

  • Cano Plá, Sandra María
  • Fernández-Penas, Raquel
  • Triunfo, Carla
  • Verdugo-Escamilla, Cristóbal
  • Gärtner, Stefanie
  • Maoloni, Gabriele
  • Cölfen, Helmut
  • Falini, Giuseppe
  • Gómez-Morales, Jaime
Póster presentado en The International Conference on Crystal Growth and Epitaxy-ICCGE-20,30 july 4 august, 2023, Naples (Italy), Fishery industry waste seashells represent an important environmental issue and imply the loss of potentially useful biomaterials [1]. They are composite materials made of CaCO3 and an organic matrix (1-5 wt.%) formed mainly of proteins and polysaccharides. Fabrication of functional calcium phosphates (eg. doped nanoapatites) using this type of biogenic CaCO3 as a calcium source may partially alleviate the ecological problem and be an alternative source of biocompatible materials intended for biomedical uses. In this work, the one-pot hydrothermal method [2] has been used in the preparation of biocompatible Mg2+, Mn2+, and Co2+-doped apatites. These divalent transition metal ions fulfill different roles in skeletal metabolism and may stimulate bone tissue regeneration [3-5]. The experiments were performed in a hydrothermal multitube set-up as well as in an autoclave, using oyster shell calcium carbonate particles from the species Crassostrea gigas, the KH2PO4 as a P reagent (P/CaCO3 0,6), and temperatures from 25ºC to 200ºC. Full transformation of CaCO3 was obtained at 160 ºC, yielding platy-shaped apatite nanoparticles doped with either 0.22 mol% Mg2+, 0.012 mol%Mn2+, or 0.16 mol% Co2+, and sizes within the range 75-90 nm. All samples showed a high cytocompatibility/biocompatibility when incubated with human mesenchymal stem cells for 1 and 3 days, and a small decrease in cell viability after 7 days of incubation in a dose-dependent concentration. Overall, the method was demonstrated to be promising in the preparation of doped biocompatible apatite nanocrystals with osteogenic features, and the biogenic CaCO3 a huge and unexplored calcium source for the preparation of apatite-based biomaterials. Acknowledgements: Grant ref. PCI2020-112108 is funded by MCIN/AEI/10.13039/501100011033 (Spain) and the European Union "NextGenerationEU"/PRTR". PCI2020-112108 is part of the project CASEAWA of ERA-NET Cofund BlueBio H2020., Grant ref. PCI2020-112108 is funded by MCIN/AEI/10.13039/501100011033 (Spain) and the European Union "NextGenerationEU"/PRTR". PCI2020- 112108 is part of the project CASEAWA of ERA-NET Cofund BlueBio H2020.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Hydrothermally Synthesized Calcium Phosphate Micro-Nanoparticles from Eggshell Calcite for Biomedical Applications

  • Torres-Mansilla, Adriana
  • Álvarez-Lloret, Pedro
  • D'Urso, Annarita
  • Oltolina, Francesca
  • Follenzi, Antonia
  • Gómez-Morales, Jaime
Póster presentado en 8th International School of Biological Crystallization, ISBC2023, 21 al 26 de mayo de 2023 en Granada, Eggshell (ES) is a biomaterial mainly composed of an inorganic component (CaCO3, calcite phase)and an organic matrix. This material is mostly discarded during food processing cycles. Hydrothermal processing can transform them into calcium phosphate (CaP) salts for industrial and technological applications. This research aims to study the effect of the ES organic matrix during the mineral replacement of CaCO3 into CaP. Additionally, this research explores the biological properties of the resulting CaP particles to determine their potential use for biomedical applications. ES pieces were collected and divided into two groups: untreated ES and ES treated with NaClO for selective removal of the organic component of the material. Subsequently, the ES were milled and sieved into different sizes (50-200 ¿m). The particles were then subjected to hydrothermal treatment using phosphate-bearing solutions at varying temperatures (100°C-200°C) for 7 days. The obtained precipitates were analyzed usi ng scanning electron microscopy (SEM), spectroscopic (ATR-FTIRand Raman), and X-ray diffraction (XRD) techniques. Biological tests were also conducted to evaluate their cytocompatibility on MG-63 human osteosarcoma tumor cells and m17.ASC murine mesenchymal stem cells, as well as the osteogenic differentiation of m17.ASC cells. The CaP particles presented crystallographic and morphological characteristics compatible mainly with the apatite. This conversion occurred differently for the CaCO3 particles in which the organic matrix was preserved, presenting a mineral deposit with hexagonal and nanostructured crystals. Spectroscopic and X-ray diffraction analyses evidenced the control of the organic matrix in the conversion of the ES particles to CaP. The pristine and treated particles were cytocompatible on MG-63 and m17.ASC cells and promoted osteogenic differentiation of m17.ASC cells. In conclusion, the hydrothermal technique allows the conversion of ES particles into CaP phases. The retained organic matrix of the CaCO3 particles mainly affects the morphological properties of the resulting CaP particles and could be useful in creating microstructured biomaterials., Acknowledgments: This work was supported by Grant ref. PCI2020-112108 funded by MCIN/AEI/10.13039 /501100011033 (Spain) and the European Union NextGenerationEU/PRTR. PCI2020-112108 is the Spanish part of the project CASEAWA of ERA-NET Cofund BlueBio H2020.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Europium and Terbium doped apatite obtained by hydrothermal transformation of biogenic calcium carbonate from oyster shells

  • Puentedura, P.
  • Fernández-Penas, Raquel
  • Cano Plá, Sandra María
  • Fernández-Sánchez, Jorge F.
  • Álvarez-Lloret, Pedro
  • Torres-Mansilla, Adriana
  • Triunfo, Carla
  • Maoloni, Gabriele
  • Cölfen, Helmut
  • Falini, Giuseppe
  • Gómez-Morales, Jaime
Póster presentado en The International Conference on Crystal Growth and Epitaxy-ICCGE-20, Naples (Italy), 30-july 4 august 2023, Seashell wastes from aquaculture and canning industries represent an important environmental issue nowadays [1]. Shells are made of calcium carbonate (CaCO3) with a low content of proteins and polysaccharides (1-5 wt.%). The valorization of this waste by using it as a raw material for the production of calcium phosphates may have a positive impact both environmental and economic, thus contributing to the sustainability of this important sector. In some biomedical industries, there is a growing demand for calcium phosphate (apatite) crystals including nanosized, micron-sized, and larger sizes. This work is devoted to producing functional apatite nanocrystals, eg. doped with luminescent lanthanide (Ln3+) ions [2,3], using oyster shells (Mg-calcite, 5 wt.% Mg) from the species Crassostrea gigas as a Ca source. Experiments were performed by a one-pot hydrothermal method using KH2PO4 as a P reagent, a P/CaCO3 ratio of 0.6 (stoichiometric respect to hydroxyapatite), and either Eu3+ or Tb3+ (10and 20 mM). Characterization by XRD, FTIR, Raman, and ICP revealed the full transformation of biogenic CaCO3 particles into doped apatite. It was obtained at 160 ºC with (Ca+Ln)/P ratios 1.72 and 1.68 when adding Eu3+ and Tb3+ (10 mM) and 1.88 and 1.99 when the lanthanide concentration in the solution increased to 20 mM. In both cases, nanocrystals displayed needleor plate-like morphologies and polydisperse size distribution. Luminescence characterization of the nanoparticles showed different luminescence spectra depending on the doping ion. They displayed excitation and emission wavelengths of 395nm and 616 nm for the Eu3+-, and 372 and 543 nm for the Tb3+-doped samples. The relative luminescence intensities correlated well with their Ln3+ content while luminescence lifetimes (up to 1600 ¿s) were higher for Tb3+-doped apatites. Overall, the nanoparticles showed notable luminescent behavior and could find application as luminescent probes for bioimaging or nanophosphors for the electronic industry. Acknowledgements: Grant ref. PCI2020-112108 is funded by MCIN/AEI/10.13039/501100011033 (Spain) and the European Union "NextGenerationEU"/PRTR". PCI2020-112108 is part of the project CASEAWA of ERA-NET Cofund BlueBio H2020., Grant ref. PCI2020-112108 is funded by MCIN/AEI/10.13039/501100011033 (Spain) and the European Union "NextGenerationEU"/PRTR". PCI2020-112108 is part of the project CASEAWA of ERA-NET Cofund BlueBio H2020