Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Micro-displacement sensor based on hollow core fiber interferometers

  • Sánchez González, Arturo
  • Rodríguez Rodríguez, Armando
  • Dauliat, Romain
  • Jamier, Raphael
  • Roy, Philippe
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
An interferometric sensor based on hollow core fibers for the measurement of micro-displacement has been designed. Its characterization has resulted in a linear response, suggesting its application in pressure sensors., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER "A way to make Europe", and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union "Next generationEU"/PTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Development of a water flow and velocity optical fiber sensor for field testing

  • Rodríguez Rodríguez, Armando
  • Urroz Unzueta, José Carlos
  • Diéguez Elizondo, Pedro
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
  • López Rodríguez, José Javier
A water flow and velocity fiber optic sensor system was developed and tested. The sensing head was especially developed and ruggedized to measure velocities at different depths, in order to calculate the discharge in channels., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER "A way to make Europe", and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union "Next generation EU"/PTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

One-year analysis of road condition using FBG arrays

  • Corera Orzanco, Íñigo
  • Pradas Martínez, Javier
  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
In this work, it is presented an analysis of FBG arrays installed in a public road. The arrays were installed in a newly paved urban road and were monitored for more than one year. The study evidences the permanent deformation of the wearing course and the degradation of the reflected spectra of the sensors., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union “Next generationEU”/PTR and the project PJUPNA06-2022 from the Public University of Navarre and the Beatriz Galindo BEAGAL18/00116 grant funded by MICINN.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Multicore fiber sensors for strain measurement towards traffic monitoring

  • Sánchez González, Arturo
  • Pradas Martínez, Javier
  • Corera Orzanco, Íñigo
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Dauliat, Romain
  • Jamier, Raphael
  • Roy, Philippe
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
In this work, two new interferometric sensors based on multicore optical fibers for the measurement of strain with the ultimate goal of traffic monitoring are presented. The operating principle of each sensor relied on the monitoring of the phase shift difference accumulated between the supermodes of the structure of the multicore segment in a full round trip. The strain characterization for both sensors resulted in a linear response, with sensitivities of -4.073·10-3 rad/με and - 4.389·10-3 rad/με for the aligned and V-shaped cases respectively, and one-hour instabilities below 4.6·10-3 rad with a 95% confidence level. These results suggest its feasibility in applications requiring high sensitivities over very wide strain ranges, such as heavy-vehicle traffic monitoring. To corroborate the hypothesis, both sensors were integrated into the pavement and their response to the traffic was analyzed., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union “Next generationEU”/PTR and the project PJUPNA06-2022 from the Public University of Navarre and the Beatriz Galindo BEAGAL18/00116 grant funded by MICINN.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Stable L-band fiber laser sensor using a backscattering-based multimode fiber reflector

  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Sánchez González, Arturo
  • Durán Lázaro, María
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
A new and highly stable L-band fiber laser for sensing is demonstrated. An emission line at 1575.47 nm, was achieved using a special reflector. Good strain sensitivity, optical signal to noise ratio and output power stability were measured., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033, the Ministerio de Educación, Cultura y Deporte of Spain (PhD grant FPU2018/02797), and European Union “Next generationEU”/PTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Fiber optic mirror fabrication using general-purpose metallic pigments

  • Jaso Gallego, Isabel
  • Mejia-Olivo, Edison
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, the potential of using general-purpose paints to fabricate highly reflective, low-cost optical mirrors is evaluated. The study shows that high-reflectivity mirrors can be created in standard single-mode fiber in a reliable, simple and economic manner using the appropriate metallic paint. Preliminary results confirm that the grain size of the metallic particles is a crucial factor in the reflective behavior, together with the substrate in which the particles are suspended. Moreover, interferometric patterns have been observed in some cases, which could lead to the creation of simple and economic fiber optic sensors., This work is part of the projects PID2019-107270RB-C02, funded by MCIN/AEI/10.13039/501100011033 and FEDER “A way to make Europe”, TED2021-130378B-C22, funded by MCIN/AEI/10.13039/501100011033 and European Union “Next generation EU”/PTR, and PDC2021-121172-C01 funded by MCIN/ AEI/10.13039/501100011033 and European Union “Next generationEU”/PTR and the project PJUPNA06-2022 from the Public University of Navarre and the Beatriz Galindo BEAGAL18/00116 grant funded by MICINN.