DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication
Contribución de congreso (ConferenceOutput)
Chemical looping combustion of biomass with CO2 capture: experimental results at the 20 kWth scale
5 figures, 2 tables.-- Work presented at the 2nd International Conference on Negative CO2 Emissions, June 14-17, 2022, Göteborg, Sweden., Chemical Looping Combustion (CLC) technology is an interesting option to produce bioenergy with CO2 Capture and Storage (BECCS) at low economic and energetic costs. The benefits of CLC are based on avoiding the costly separation steps by using an oxygen carrier, usually a metal oxide, to transfer oxygen from air to fuel avoiding the contact between them. Thus, CO2 capture is inherent to the CLC process.
In this work, the combustion of a biomass residue –olive stone, with high availability in Spain– is performed in a CLC unit at the 20 kWth scale using a highly reactive iron ore as oxygen carrier. Oxygen transference for the combustion is achieved by continuously circulating the oxygen carrier between two interconnected fluidized bed reactors: the fuel and air reactors. Biomass is fed at the bottom of the fuel reactor to maximize the contact between the volatile matter and the oxygen carrier particles. The oxygen carrier was regenerated in the air reactor by air. In addition, a carbon stripper was also implemented as a key element in order to increase CO2 capture efficiency by recovering char particles escaping the fuel reactor. A total of 100 h of continuous hot fluidization were carried out, 40 of them corresponded to biomass combustion. The tests were designed to rationally analyse the effect on the combustion efficiency and the CO2 capture of the main operating conditions: oxygen carrier to fuel ratio (=1-3), temperature of the fuel reactor (850-970 ºC), and specific solids inventory (160-500 kg/MWth).
CO2 capture efficiency increases with the fuel reactor temperature because the increase in the char gasification rate. In addition, it also increases up to 98 % by increasing the solids inventory or decreasing the solids circulation, i.e. varying the mean residence time of solids in the fuel reactor. Full combustion was not achieved due to the high volatile content of the biomass and the uncompleted oxidation of char gasification products. Oxygen demand values in the range of 3-20 % were obtained, being the behaviour of gasification products (H2+CO) different to hydrocarbons from volatile matter (e.g. CH4). The presence of unburnt H2 and CO was mainly affected by the char conversion; but the increase in the solids circulation rate also has a remarkable effect on the decrease of unconverted hydrocarbons., This work was performed in the UPCLOU, supported by the Grant PDC2021-121190-I00 funded by MCIN/AEI /10.13039/501100011033 and by European Union Next GenerationEU/ PRTR., Peer reviewed