Skip to main content

TELEDETECCION ATMOSFERICA MEDIANTE SENSORES COOPERATIVOS LIDAR, RADAR Y PASIVOS: APLICACIONES SOBRE TIERRA Y MAR PARA LA OBSERVACION ATMOSFERICA Y ENERGIA EOLICA OFF-SHORE

PGC2018-094132-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Floating Doppler Wind Lidar measurement of wind turbulence: a cluster analysis

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Gutiérrez Antuñano, Miguel Ángel|||0000-0003-3725-3880
  • Tiana Alsina, Jordi|||0000-0001-8359-9378
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
The standard deviation of the Horizontal Wind Speed as a proxy of wind turbulence is used to compare the apparent wind turbulence measured by an off-shore floating Doppler lidar to the one measured by a fixed lidar on a metmast. We use statistical analysis based on clustering the horizontal wind speed measured by the floating lidar as well as buoy angular amplitude and period under the approximation of harmonic motion. Three scenarios with different wave and wind conditions are discussed from the IJmuiden's test campaign (North Sea.)., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Atmospheric boundary layer height disambiguation using synergistic remote sensing observations: case examples from VORTEX-SE

  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Tanamachi, Robin
  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Villalonga, Joan
  • Frasier, Stephen J.
  • Turner, David Dave
Synergistic remote sensing of the atmosphere, combined with adaptive techniques, offers unprecedented opportunities to characterise the evolution of key atmospheric features such as the Atmospheric Boundary Layer (ABL). Using long-duration, high-resolution, profiling observations from active and passive ground-based remote sensing systems during the Verification of the Origins of Rotation in Tornadoes Experiment{Southeast (VORTEX-SE) 2017 field campaign, an attempt is made to characterise ABL development over distinct regions that are well known for their relatively high tornado frequency. In this study, observing systems include an S-band radar, Vaisala CL-31 ceilometer, Doppler Wind lidar (DWL) and radiometric observations from the Collaborative Lower Atmosphere Mobile Profiling System (CLAMPS). In this work, ABL height (ABLH) tracking over the diurnal cycle, and - up to a point - its disambiguation over selected non-precipitating case examples, are attempted. Different observational sets are used, namely, radar reflectivity observations assimilated into a Kalman filter, DWL profiles of the vertical velocity, and virtual potential temperature profiles, as well as radiosoundings and cloudbase reference information collected during Intensive Observation Periods (IOP) carried out in VORTEX-SE, Alabama during 2017. Limitations and advantages of each system are discussed., This work was supported by NOAA grants NA1501R4590232 and NA16OAR4590209, and by the Purdue University Dept. of Earth, Atmospheric, and Planetary Sciences (EAPS). CommSensLab-UPC (Excellence UnitMDM-2016-0600 funded by the Agencia Estatal de Investigación, Spain) collaborated via Spanish Gov.– EURegional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-PPP project GA-739530. The Spanish National Science Foundation (Ministerio de Ciencia, Innovación y Universidades) funded doctoral grant PRE2018-086054 hold by M.P. Araujo da Silva., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Synergistic mixed-layer height retrieval method using microwave radiometer and lidar ceilometer observations

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Tanamachi, Robin
  • Saeed, Umar|||0000-0003-0261-2767
This paper tackles synergistic mixed-layer height (MLH) estimation via a combination of microwave radiometer (MWR) and lidar ceilometer (LC)-based estimates. While MLH-MWR estimates rely on potential temperature retrievals, MLH-LC estimates rely on aerosol gradients. The pros and cons of MLH retrievals obtained from MWR via the parcel method and from LC via an extended Kalman filter (EKF)-based method are used to motivate the synergistic algorithm. The synergistic algorithm is introduced as a maximum-likelihood combination of MLH-MWR and MLH-LC. Two case examples from the 2013 HOPE campaign at Jülich, Germany, are used to show the robustness of the synergistic method and the effect of surface temperature measurement error. Doppler wind lidar retrievals and radiosonde reference MLH estimates are used for validation., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER. Data were provided by Julich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of M.P.A.S was supported under Grant PRE2018-086054 funded by MCIN/AEI/ 10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Numerical solver for vertical air motion estimation

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Domínguez Pla, Paula
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Frasier, Stephen J.
We present preliminary research on a method to estimate Vertical Air Motion (VAM) at a particular height by comparing the measured rain-rate (RR) by a vertically-pointing S-band Frequency-Modulated Continuous-Wave (FMCW) radar with that of a ground-based disdrometer. The method is based on a constrained parametric solver, assuming high correlation between 5-min averaged rain rates measured by the radar and disdrometer. The method is tested over disdrometer and radar observations during the Verification of the ORigins Tornado EXperiment in South East US (VORTEX-SE) project. Finally, the results are partially validated by means of fitting a gamma distribution to the VAM-corrected DSD profiles and studying its parameters., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMOACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Floating lidar assessment of atmospheric stability in the North Sea

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Farré Guarné, Joan
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • González Marco, Daniel|||0000-0002-9619-1897
  • Peña Diaz, Alfredo
In this work, the 2D parametric-solver algorithm [1] used to assess atmospheric stability from floating Doppler wind lidar (FDWL) measurements is revisited. The algorithm performance is studied using data from IJmuiden campaign. Mast-measured temperature and wind-speed provided the reference parameters used to evaluate the performance of the stability estimation algorithm. From 5,922 10-min samples available, the algorithm classified the atmosphere as stable (52% of the cases), neutral (31%) and unstable (17%), which successfully agreed with the mast-derived reference classification (53%, 30% and 17%, respectively)., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of M.P Araujo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Variance processing for stable boundary-layer height estimation using backscatter lidar data: A discussion

  • Muñoz Porcar, Constantino|||0000-0002-6543-119X
  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Saeed, Umar|||0000-0003-0261-2767
  • Rey Micolau, Francesc|||0000-0003-3615-7627
  • Pay Pérez, M. Teresa
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
In this paper we present a method for estimating the height of the nocturnal stable boundary layer by using lidar measurements and a single radiosonde for unambiguous initial guess. The method relies on the correlation between aerosol stratifications in the stable boundary layer and minimum variance levels in the attenuated backscatter profile. The method is based on calculating either temporal or spatial variance vertical profiles of the attenuated backscatter and threshold-limited decision. A radiosonde temperature-based estimation is used to provide an initial guess if several minimum variance regions are detected. Two study cases using ceilometer data are shown. Comparison with temperature-based estimations from a collocated microwave radiometer have been used for validation. The method can be useful for estimating the stable boundary layer height in sites with a ceilometer but without any available temperature profiler., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-IMP (GA 871115). CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigación, Spain. The work of M.P. Araujo da Silva was supported by the Spanish Ministry of Science, Innovation and Universities under Grant PRE2018-086054. Data were provided by Jülich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Convective boundary-layer height estimation from combined radar and Doppler lidar observations in VORTEX-SE

  • Villalonga, Joan
  • Beveridge, Susan L.
  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Tanamachi, Robin
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Turner, David Dave
  • Frasier, Stephen J.
The Verification of the Origins of Rotation in Tornadoes Experiment Southeast (VORTEX-SE) provides a wealth of long-duration, high-resolution, vertically pointing observations from active and passive ground-based remote sensing systems enabling characterization of the Atmospheric Boundary Layer (ABL) development over distinct regions that are well known for their relatively high tornado frequency. Application of the Extended Kalman Filter (EKF) to BL height estimation in the convective regime (CBLH) of the diurnal cycle from S-band radar reflectivity observations1 has shown to yield accurate results under simple CBL conditions. In this work, we revisit the radar-EKF technique and investigate its main limitations. For example, during daytime clear-sky conditions such as those prevailing in the BL morning transition, weak turbulence leads to very low reflectivity returns, limiting application of this technique. Additionally, turbulent mixing layers capped with a residual layer, and/or multi-layer scenarios can lead the filter to lose track of the BL signature over time. Doppler Wind Lidar (DWL) observations of the vertical wind velocity variance2 provide complementary CBLH estimates to those of the radar-EKF combination, providing potential to disambiguate more complex convective cases. DWL estimates are, however, strongly influenced by the variance threshold selected. The complementarity of radar and DWL for CBLH estimation is studied in reference to radiosoundings., This work was supported by NOAA grants NA1501R4590232 and NA16OAR4590209, and by the Purdue University Dept. of Earth, Atmospheric, and Planetary Sciences (EAPS). CommSensLab-UPC (Excellence Unit MDM-2016-0600 funded by the Agencia Estatal de Investigación, Spain) collaborated via Spanish Gov.- EU Regional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-PPP project GA-739530. The Spanish National Science Foundation (Ministerio de Ciencia, Innovación y Universidades) funded doctoral grant PRE2018-086054 hold by M.P. Araujo da Silva., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

On adaptive unscented Kalman filtering for floating Doppler wind-lidar motion correction: Effect of the number of lidar measurement heights

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
This work studies the influence of the number of lidar measurement heights on the performance of the floating Doppler wind lidar motion-correction algorithm, recently published by the authors. The work is in the context of offshore wind energy and continuous-wave focusable ZephirTM 300 lidar. A downsampling technique applied over the lidar-measured wind speed time-series is used to simulate different height-sounding configurations. The operation of the filter under one, three, and five measurement heights of the lidar is studied by using data from El Pont del Petroli measurement campaign. The filter is proved to remove apparent turbulence addition in all three cases, showing a deterioration of statistical indicators as the number of sounding heights increase., This research was funded by the Spanish Government and EU Regional Development Funds, ARS project PGC2018-094132-B-I00, H2020 ACTRIS-IMP project GA-871115 and H2020 ATMO-ACCESS project GA101008004. The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns. The Generalitat de Catalunya—AGAUR funded doctoral grant 2020 FISDU 00455 by A. Salcedo-Bosch. CommSensLab-UPC is an Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Offshore Doppler Wind LiDAR assessment of atmospheric stability

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Gutiérrez Antuñano, Miguel Ángel|||0000-0003-3725-3880
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This paper tackles atmospheric stability typing using a Zephyr™ 300 offshore Doppler Wind Lidar in the context of its progressive acceptance in the offshore wind-energy industry. The lidar-retrieved wind-shear exponent, which is used as a proxy atmospheric stability, is compared against the wind-shear exponent and the potential temperature gradient both retrieved from reference metmast. A total sample of 4319 measurements is analysed from IJmuiden's test campaign, in the North Sea, from April 1 st to 30 th, 2015. Concerning stability typing, both lidar- and metmast-derived wind-shear indicators overestimated by 4% and 14%, respectively, the most frequent atmospheric stability case, which was convective (48% of the cases) according to the potential temperature reference indicator., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation) that also funded the project MDM-2016-0600-18-1. Spanish NSF (Ministry of Science, Innovation and Universities; Ministerio de Ciencia, Innovacion y Universidades) for doctoral grant PRE2018-086054 hold by Ph.D. student Araujo da Silva M.P. at CommSensLab-UPC., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Motional behavior estimation using simple spectral estimation: application to the off-shore wind lidar

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Gutiérrez Antuñano, Miguel Ángel|||0000-0003-3725-3880
  • Tiana Alsina, Jordi|||0000-0001-8359-9378
This paper proposes two methods to estimate the so-called “characteristic motional period” of a floating wind-lidar buoy. These techniques aim to characterise the buoy's pitch and roll tilting as simple harmonic motions by estimating their period. The “peak method” (PM) and the “3-dB method” are introduced as two different aproaches to study the multi-modality of the wave motion. Additionally, the off-shore wind measurement campaign at Ijmuiden's is briefly introduced to contextualize where data comes from and the added value of this study., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Floating Doppler Wind Lidar motion simulator for horizontal wind speed measurement error assessment

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Farré Guarné, Joan
  • Sala Álvarez, José|||0000-0002-6879-1991
  • Villares Piera, Nemesio Javier|||0000-0001-5701-9819
  • Tanamachi, Robin
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
This study presents a wind retrieval simulator of a floating Doppler Wind Lidar (DWL) with 6 Degrees of Freedom (DoF) motion. The simulator considers a continuous-wave conical-scanning floating DWL which retrieves the wind vector from 50 radial velocities per scan. The 6 DoF motion framework as well as the most important buoy motion equations are summarized. Rotational and translational motion effects over HWS measurements are studied parametrically., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and H2020 ACTRIS- IMP (GA-871115). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigación (Spanish National Science Foundation). The work of Andreu Salcedo was supported by the “Agència de Gestió d’Adjuts Universitaris i de la Recerca (AGAUR)”, Generalitat de Catalunya, under Grant no. 2020 FISDU 00455., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Convective boundary-layer height estimation from combined radar and Doppler lidar observations in VORTEX-SE

  • Villalonga, Joan
  • Beveridge, Susan L.
  • Silva, Marcos Paulo Aráujo da
  • Tanamachi, Robin
  • Rocadenbosch Burillo, Francisco
  • Turner, David Dave
  • Frasier, Stephen J.
The Verification of the Origins of Rotation in Tornadoes Experiment Southeast (VORTEX-SE) provides a wealth of long-duration, high-resolution, vertically pointing observations from active and passive ground-based remote sensing systems enabling characterization of the Atmospheric Boundary Layer (ABL) development over distinct regions that are well known for their relatively high tornado frequency. Application of the Extended Kalman Filter (EKF) to BL height estimation in the convective regime (CBLH) of the diurnal cycle from S-band radar reflectivity observations1 has shown to yield accurate results under simple CBL conditions. In this work, we revisit the radar-EKF technique and investigate its main limitations. For example, during daytime clear-sky conditions such as those prevailing in the BL morning transition, weak turbulence leads to very low reflectivity returns, limiting application of this technique. Additionally, turbulent mixing layers capped with a residual layer, and/or multi-layer scenarios can lead the filter to lose track of the BL signature over time. Doppler Wind Lidar (DWL) observations of the vertical wind velocity variance2 provide complementary CBLH estimates to those of the radar-EKF combination, providing potential to disambiguate more complex convective cases. DWL estimates are, however, strongly influenced by the variance threshold selected. The complementarity of radar and DWL for CBLH estimation is studied in reference to radiosoundings., This work was supported by NOAA grants NA1501R4590232 and NA16OAR4590209, and by the Purdue University Dept. of Earth, Atmospheric, and Planetary Sciences (EAPS). CommSensLab-UPC (Excellence Unit MDM-2016-0600 funded by the Agencia Estatal de Investigación, Spain) collaborated via Spanish Gov.- EU Regional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-PPP project GA-739530. The Spanish National Science Foundation (Ministerio de Ciencia, Innovación y Universidades) funded doctoral grant PRE2018-086054 hold by M.P. Araujo da Silva., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

On adaptive unscented Kalman filtering for floating Doppler wind-lidar motion correction: Effect of the number of lidar measurement heights

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Sospedra Iglesias, Joaquim
This work studies the influence of the number of lidar measurement heights on the performance of the floating Doppler wind lidar motion-correction algorithm, recently published by the authors. The work is in the context of offshore wind energy and continuous-wave focusable ZephirTM 300 lidar. A downsampling technique applied over the lidar-measured wind speed time-series is used to simulate different height-sounding configurations. The operation of the filter under one, three, and five measurement heights of the lidar is studied by using data from El Pont del Petroli measurement campaign. The filter is proved to remove apparent turbulence addition in all three cases, showing a deterioration of statistical indicators as the number of sounding heights increase., This research was funded by the Spanish Government and EU Regional Development Funds, ARS project PGC2018-094132-B-I00, H2020 ACTRIS-IMP project GA-871115 and H2020 ATMO-ACCESS project GA101008004. The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns. The Generalitat de Catalunya—AGAUR funded doctoral grant 2020 FISDU 00455 by A. Salcedo-Bosch. CommSensLab-UPC is an Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Offshore Doppler Wind LiDAR assessment of atmospheric stability

  • Silva, Marcos Paulo Aráujo da
  • Salcedo Bosch, Andreu
  • Gutiérrez Antuñano, Miguel Ángel
  • Rocadenbosch Burillo, Francisco
This paper tackles atmospheric stability typing using a Zephyr™ 300 offshore Doppler Wind Lidar in the context of its progressive acceptance in the offshore wind-energy industry. The lidar-retrieved wind-shear exponent, which is used as a proxy atmospheric stability, is compared against the wind-shear exponent and the potential temperature gradient both retrieved from reference metmast. A total sample of 4319 measurements is analysed from IJmuiden's test campaign, in the North Sea, from April 1 st to 30 th, 2015. Concerning stability typing, both lidar- and metmast-derived wind-shear indicators overestimated by 4% and 14%, respectively, the most frequent atmospheric stability case, which was convective (48% of the cases) according to the potential temperature reference indicator., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation) that also funded the project MDM-2016-0600-18-1. Spanish NSF (Ministry of Science, Innovation and Universities; Ministerio de Ciencia, Innovacion y Universidades) for doctoral grant PRE2018-086054 hold by Ph.D. student Araujo da Silva M.P. at CommSensLab-UPC., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Synergistic mixed-layer height retrieval method using microwave radiometer and lidar ceilometer observations

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Tanamachi, Robin
  • Saeed, Umar
This paper tackles synergistic mixed-layer height (MLH) estimation via a combination of microwave radiometer (MWR) and lidar ceilometer (LC)-based estimates. While MLH-MWR estimates rely on potential temperature retrievals, MLH-LC estimates rely on aerosol gradients. The pros and cons of MLH retrievals obtained from MWR via the parcel method and from LC via an extended Kalman filter (EKF)-based method are used to motivate the synergistic algorithm. The synergistic algorithm is introduced as a maximum-likelihood combination of MLH-MWR and MLH-LC. Two case examples from the 2013 HOPE campaign at Jülich, Germany, are used to show the robustness of the synergistic method and the effect of surface temperature measurement error. Doppler wind lidar retrievals and radiosonde reference MLH estimates are used for validation., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER. Data were provided by Julich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of M.P.A.S was supported under Grant PRE2018-086054 funded by MCIN/AEI/ 10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Variance processing for stable boundary-layer height estimation using backscatter lidar data: A discussion

  • Muñoz Porcar, Constantino
  • Silva, Marcos Paulo Aráujo da
  • Saeed, Umar
  • Rey Micolau, Francesc
  • Pay Pérez, M. Teresa
  • Rocadenbosch Burillo, Francisco
In this paper we present a method for estimating the height of the nocturnal stable boundary layer by using lidar measurements and a single radiosonde for unambiguous initial guess. The method relies on the correlation between aerosol stratifications in the stable boundary layer and minimum variance levels in the attenuated backscatter profile. The method is based on calculating either temporal or spatial variance vertical profiles of the attenuated backscatter and threshold-limited decision. A radiosonde temperature-based estimation is used to provide an initial guess if several minimum variance regions are detected. Two study cases using ceilometer data are shown. Comparison with temperature-based estimations from a collocated microwave radiometer have been used for validation. The method can be useful for estimating the stable boundary layer height in sites with a ceilometer but without any available temperature profiler., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-IMP (GA 871115). CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigación, Spain. The work of M.P. Araujo da Silva was supported by the Spanish Ministry of Science, Innovation and Universities under Grant PRE2018-086054. Data were provided by Jülich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Numerical solver for vertical air motion estimation

  • Salcedo Bosch, Andreu
  • Domínguez Pla, Paula
  • Rocadenbosch Burillo, Francisco
  • Frasier, Stephen J.
We present preliminary research on a method to estimate Vertical Air Motion (VAM) at a particular height by comparing the measured rain-rate (RR) by a vertically-pointing S-band Frequency-Modulated Continuous-Wave (FMCW) radar with that of a ground-based disdrometer. The method is based on a constrained parametric solver, assuming high correlation between 5-min averaged rain rates measured by the radar and disdrometer. The method is tested over disdrometer and radar observations during the Verification of the ORigins Tornado EXperiment in South East US (VORTEX-SE) project. Finally, the results are partially validated by means of fitting a gamma distribution to the VAM-corrected DSD profiles and studying its parameters., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMOACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Floating Doppler Wind Lidar measurement of wind turbulence: a cluster analysis

  • Salcedo Bosch, Andreu
  • Gutiérrez Antuñano, Miguel Ángel
  • Tiana Alsina, Jordi
  • Rocadenbosch Burillo, Francisco
The standard deviation of the Horizontal Wind Speed as a proxy of wind turbulence is used to compare the apparent wind turbulence measured by an off-shore floating Doppler lidar to the one measured by a fixed lidar on a metmast. We use statistical analysis based on clustering the horizontal wind speed measured by the floating lidar as well as buoy angular amplitude and period under the approximation of harmonic motion. Three scenarios with different wave and wind conditions are discussed from the IJmuiden's test campaign (North Sea.)., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Motional behavior estimation using simple spectral estimation: application to the off-shore wind lidar

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Gutiérrez Antuñano, Miguel Ángel
  • Tiana Alsina, Jordi
This paper proposes two methods to estimate the so-called “characteristic motional period” of a floating wind-lidar buoy. These techniques aim to characterise the buoy's pitch and roll tilting as simple harmonic motions by estimating their period. The “peak method” (PM) and the “3-dB method” are introduced as two different aproaches to study the multi-modality of the wave motion. Additionally, the off-shore wind measurement campaign at Ijmuiden's is briefly introduced to contextualize where data comes from and the added value of this study., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and EU H2020 ACTRIS-2 (GA 654109). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigacion (Spanish National Science Foundation)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Floating lidar assessment of atmospheric stability in the North Sea

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Farré Guarné, Joan
  • Salcedo Bosch, Andreu
  • González Marco, Daniel
  • Peña Diaz, Alfredo
In this work, the 2D parametric-solver algorithm [1] used to assess atmospheric stability from floating Doppler wind lidar (FDWL) measurements is revisited. The algorithm performance is studied using data from IJmuiden campaign. Mast-measured temperature and wind-speed provided the reference parameters used to evaluate the performance of the stability estimation algorithm. From 5,922 10-min samples available, the algorithm classified the atmosphere as stable (52% of the cases), neutral (31%) and unstable (17%), which successfully agreed with the mast-derived reference classification (53%, 30% and 17%, respectively)., This research is part of the projects PGC2018-094132-B-I00 and MDM2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of M.P Araujo da Silva was supported under Grant PRE2018-086054 funded by MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Atmospheric boundary layer height disambiguation using synergistic remote sensing observations: case examples from VORTEX-SE

  • Rocadenbosch Burillo, Francisco
  • Tanamachi, Robin
  • Silva, Marcos Paulo Aráujo da
  • Villalonga, Joan
  • Frasier, Stephen J.
  • Turner, David Dave
Synergistic remote sensing of the atmosphere, combined with adaptive techniques, offers unprecedented opportunities to characterise the evolution of key atmospheric features such as the Atmospheric Boundary Layer (ABL). Using long-duration, high-resolution, profiling observations from active and passive ground-based remote sensing systems during the Verification of the Origins of Rotation in Tornadoes Experiment{Southeast (VORTEX-SE) 2017 field campaign, an attempt is made to characterise ABL development over distinct regions that are well known for their relatively high tornado frequency. In this study, observing systems include an S-band radar, Vaisala CL-31 ceilometer, Doppler Wind lidar (DWL) and radiometric observations from the Collaborative Lower Atmosphere Mobile Profiling System (CLAMPS). In this work, ABL height (ABLH) tracking over the diurnal cycle, and - up to a point - its disambiguation over selected non-precipitating case examples, are attempted. Different observational sets are used, namely, radar reflectivity observations assimilated into a Kalman filter, DWL profiles of the vertical velocity, and virtual potential temperature profiles, as well as radiosoundings and cloudbase reference information collected during Intensive Observation Periods (IOP) carried out in VORTEX-SE, Alabama during 2017. Limitations and advantages of each system are discussed., This work was supported by NOAA grants NA1501R4590232 and NA16OAR4590209, and by the Purdue University Dept. of Earth, Atmospheric, and Planetary Sciences (EAPS). CommSensLab-UPC (Excellence UnitMDM-2016-0600 funded by the Agencia Estatal de Investigación, Spain) collaborated via Spanish Gov.– EURegional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-PPP project GA-739530. The Spanish National Science Foundation (Ministerio de Ciencia, Innovación y Universidades) funded doctoral grant PRE2018-086054 hold by M.P. Araujo da Silva., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Floating Doppler Wind Lidar motion simulator for horizontal wind speed measurement error assessment

  • Salcedo Bosch, Andreu
  • Farré Guarné, Joan
  • Sala Álvarez, José
  • Villares Piera, Nemesio Javier
  • Tanamachi, Robin
  • Rocadenbosch Burillo, Francisco
This study presents a wind retrieval simulator of a floating Doppler Wind Lidar (DWL) with 6 Degrees of Freedom (DoF) motion. The simulator considers a continuous-wave conical-scanning floating DWL which retrieves the wind vector from 50 radial velocities per scan. The 6 DoF motion framework as well as the most important buoy motion equations are summarized. Rotational and translational motion effects over HWS measurements are studied parametrically., This work was supported via Spanish Government–European Regional Development Funds project PGC2018-094132-B-I00 and H2020 ACTRIS- IMP (GA-871115). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (Offshore Metocean Data Measuring Equipment and Wind, Wave and Current Analysis and Forecasting Software, call FP7) supported measurements campaigns. CommSensLab is a María-de-Maeztu Unit of Excellence funded by the Agencia Estatal de Investigación (Spanish National Science Foundation). The work of Andreu Salcedo was supported by the “Agència de Gestió d’Adjuts Universitaris i de la Recerca (AGAUR)”, Generalitat de Catalunya, under Grant no. 2020 FISDU 00455., Peer Reviewed, Postprint (author's final draft)