Skip to main content

TECNOLOGIAS RADIO PARA COMUNICACIONES UBICUAS EN LA EVOLUCION DE 5G A 6G

PID2019-104945GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Contextual multi-armed bandits for non-stationary wireless network selection

  • Martínez Casanovas, Lluís
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Cabrera-Bean, Margarita|||0000-0001-9058-3825
As the number of wireless technologies (4G, 5G, 802.11ax and other) have been rapidly increasing, so have the number of wireless networks concurrently deployed on a given coverage area. As a result, the judicious selection of the network that maximizes the quality perceived by a user terminal has become a significantly relevant problem. Contextual Multi-Armed Bandits (CMAB) are viable models to approach the problem. While multiple CMAB algorithms have been designed, most of them are only suited for stationary environments. This work proposes a new set of network selection algorithms that relate the traffic type (used as contextual information) to the perceived quality of the available networks for non-stationary scenarios. Results show significantly improved performance when compared to non-adaptive approaches., This work has been funded through the project ROUTE56 (Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, PID2019-104945GB-I00/ AEI / 10.13039/501100011033) and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Correlated binary data for machine learning

  • Llobet Turró, Martí
  • Cabrera-Bean, Margarita|||0000-0001-9058-3825
Data sets containing instances that are assigned values by an ensemble of annotators of unknown accuracy are becoming increasingly common. Binary, potentially correlated data are frequent in a number of disciplines, and thus eligible to be exploited by ensemble meta-learners. A prior key step is testing the meta-learners with synthetic data sets featuring realistic correlation patterns, which is the main scope of this work. To achieve this goal, two challenges are faced: (i) finding out a new correlated pattern to model Bernoulli random variables, and (ii) obtaining a process to generate realistic synthetic data sets. A comparative analysis and performance results are provided for two methods of artificial data generation. The methods are also tested using two state-of-the-art binary ensemble meta-learners that consider inter-classifier dependencies., This work was supported by the project ROUTE56 (Agencia Estatal de Investigacion, PID2019-104945GB-I00/AEI/10.13039/501100011033), and in part by the Grant 2017 SGR 578 (AGAUR, Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Deep learning-based data fusion of 6G sensing and inertial information for target positioning: experimental validation

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Grudnitsky, Artjom
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
The sixth-generation (6G) cellular technology will be deployed with a key feature of Integrated Sensing and Communication (ISAC), allowing the cellular network to map the environment through radar sensing on top of providing communication services. In this regard, the entire network can be considered as a sensor with a broader Field of View (FoV) of the environment, assisting in both the positioning of active and detection of passive targets. On the other hand, the non-3GPP sensors available on the target can provide additional information specific to the target that can be beneficially combined with ISAC sensing information to enhance the overall achievable positioning accuracy. In this paper, we first study the performance of the ISAC system in terms of its achievable accuracy in positioning the mobile target in an indoor scenario. Second, we study the performance gain achieved in the ISAC positioning accuracy after fusing the information from the target's non-3GPP sensors. To this end, we propose a novel data fusion solution based on the deep learning framework to fuse the information from ISAC and non-3GPP sensors. We validate our proposed data fusion and positioning solution with a real-world ISAC Proof-of-Concept (PoC) as the wireless infrastructure, an Automated Guided Vehicle (AGV) as the target, and the Inertial Measurement Unit (IMU) sensor on the target as the non-3GPP sensor. The experimental results show that our proposed solution achieves an average positioning error of 3 cm, outperforming the considered baselines., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, part of this work has been supported by the German Federal Ministry of Education and Research (Foerderkennzeichen 16KISK116, KOMSENS-6G). In addition, this work is also part of the project ROUTE56 with grant PID2019-104945GBI00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Outlier rejection for 5G-based indoor positioning in ray-tracing-enabled industrial scenario

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
The precise and accurate indoor positioning using cellular communication technology remains to be a prerequisite for several industrial applications, including the emergence of a new topic of Integrated Sensing and Communication (ISAC). However, the frequently occurring Non-Line-of-Sight (NLoS) conditions in a heavy multipath dominant industrial scenario challenge the wireless signal propagation, leading to abnormal estimation errors (outliers) in the signal measurements taken at the receiver. In this paper, we investigate the iterative positioning scheme that is robust to the outliers in the Time of Arrival (ToA) measurements. The Iteratively Reweighted Least Squares (IRLS) positioning scheme formulated on the Least Squares (LS) is implemented to reject the outlier measurements and reweight the available ToA samples based on their confidence. Our positioning scheme is validated under 5G frequency bands, including the C-band (3.7 GHz) and the mmWave-band (26.8 GHz) in a Ray-Tracing enabled industrial scenario with different emulation setups., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, this work is part of the project ROUTE56 with grant PID2019-104945GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

RIS-aided location estimation based on MVDR in near-field conditions

  • Pastor Redondo, Adrian
  • Pascual Iserte, Antonio|||0000-0001-5596-2029
  • Muñoz Medina, Olga|||0000-0002-8739-7068
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper, we propose a reconfigurable intelligence surface (RIS)-aided location system. Through such a system, we exploit that near-field (NF) effects are still significant at long distances in mm-wave bands (i.e., up to the Fraunhofer distance) for large RISs. Specifically, we leverage the wavefront curvature, which depends on the impinging direction of arrival and the distance to the RIS, to locate emitting sources. As the location procedure cannot directly access the signals at a passive RIS, our method uses the signals reflected by the RIS that impinge on an antenna array located close to the RIS. By processing the signals the array collects, we estimate the spatial power density in a given region using a minimum variance distortionless response (MVDR) estimator. As shown in the paper, this technique can precisely estimate the positions of a set of sources within the NF region of the RIS. Even though the signals that are processed are those collected by the antenna array and not the signals at the RIS, the proposed system can provide a much higher location accuracy than a system with only the antenna array without RIS. We also extend the approach to scenarios with multiple RIS-array pairs., This work has been funded through project ROUTE56 (PID2019- 104945GB-I00) funded by MCIN/AEI/10.13039/501100011033; project 6-SENSES (PID2022-138648OB-I00) funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, EU; and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Hierarchical beamforming in random access channels

  • Agustín de Dios, Adrián|||0000-0002-5723-9739
  • Cabrera-Bean, Margarita|||0000-0001-9058-3825
  • Vidal Manzano, José|||0000-0002-1985-2065
Managing a massive number of terminals in a contention-based multiple access is challenging due to its intrinsic limited efficiency. For example, in the random access channel considered in LTE-A and 5G NR, Base Station (BS) is just aware of the collided and non-collided preambles. Several time-based protocols have been investigated to redistribute the overload under high terminal activity, thus avoiding the congestion. In this work, we explore the use of the spatial domain by means of a hierarchical codebook-based beamforming, where the BS selects the appropriate beams as a function of the number of non-collided and collided preambles. Since the activity and placement of terminals may be dynamic over time, the sequential selection of parameters can benefit from a reinforcement learning (RL) framework. We propose an algorithm that can exploit both domains, temporal and spatial, with the goal of reducing collisions and enhancing transmission delay. Our approach is able to efficiently learn whenever there is a non-homogeneous spatial distribution of terminals and adapt the spatial beams accordingly., The work of A.Agustin was supported by the Spanish Government through the Statistical Learning and Inference for Large Dimensional Communication Systems (ARISTIDES, RTI2018-099722-B-100) Project. The work of J.Vidal and M.Cabrera-Bean was supported by the project ROUTE56 (Agencia Estatal de Investigación, PID2019-104945GB-I00/AEI/10.13039/501100011033), and in part by the Grant 2017 SGR 578 (AGAUR, Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Impact of near-field conditions on the performance of RIS-aided mmWave communication strategies

  • Campoy García, David|||0009-0004-3135-3834
  • Muñoz Medina, Olga|||0000-0002-8739-7068
  • Pascual Iserte, Antonio|||0000-0001-5596-2029
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper, we consider a reconfigurable intelligent surface (RIS)-based transmitter operating in a high-frequency band that sends more symbols per channel use than the number of antennas at the receiver. For such a system, we present a comprehensive study on the design and performance of a neural network (NN)-based receiver. We evaluate the performance of the minimum mean squared error (MMSE) receiver, which is a linear receiver, the optimum maximum likelihood (ML) detector, and the NN-based receiver for recovering the transmitted symbols. The numerical simulations carried out for all the detectors considered prove that the classical far-field simplification leads to a performance underestimation in scenarios involving wide transmitters and high-frequency bands, as the one considered in this paper. Moreover, the results show that the NN-based receiver achieves a favorable trade-off between complexity and performance, outperforming the MMSE receiver while maintaining a lower complexity than the ML detector., This work has been funded through project ROUTE56 (PID2019- 104945GB-I00) funded by MCIN/AEI/10.13039/501100011033; project 6-SENSES (PID2022-138648OB-I00) funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, EU; and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A survey of 5G-based positioning for industry 4.0: state of the art and enhanced techniques

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
The fifth generation (5G) mobile communication technology integrates communication, positioning, and mapping functionalities as an in-built feature. This has drawn significant attention from industries owing to the capability of replacing the traditional wireless technologies used in industries with 5G infrastructure that can be used for both connectivity and positioning. To this end, we identify the Automated Guided Vehicle (AGV) as a primary use case to benefit from the 5G functionalities. Given that there have been various works focusing on 5G positioning, it is necessary to analyze the existing works about their applicability with AGVs in industrial environments and provide insights to future research. In this paper, we present state of the art in 5G-based positioning, with a focus on key features, such as Millimeter Wave (mmWave) system, Massive Multiple Input Multiple Output (MIMO), Ultra-Dense Network (UDN), Device-to-Device (D2D) communication, and Reconfigurable Intelligent Surface (RIS). Moreover, we present the shortcomings in the current state of the art. Additionally, we propose enhanced techniques that can complement the accuracy of 5G-based positioning in controlled industrial environments., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, partially funded through the project ROUTE56 (funded by the Agencia Estatal de Investigacion, PID2019-104945GB- I00 / AEI / 10.13039/501100011033)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

RIS phase optimization for near-field 5G positioning: CRLB minimization

  • Macías López, Carla
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
  • Closas Gómez, Pau
This article addresses near-field localization using Reconfigurable Intelligent Surfaces (RIS) in 5G systems, where Line-of-Sight (LOS) between the base station and the user is obstructed. We propose a RIS phase optimization method based on the minimization of the Cramér-Rao Lower Bound (CRLB) for position estimation. The main contributions of the article are: (1) the derivation of the CRLB to optimize the RIS configuration; and (2) the application of the mentioned framework in nearfield considering reflective RIS. The proposed method is validated with simulations, showing an accuracy improvement of RIS phase optimization with respect to the state-of-the-art methods., The UPC authors are within the Signal Processing and Communications Group at UPC recognized as a consolidated research group by the Generalitat de Catalunya through 2021 SGR 01033. This publication is part of the project ROUTE56 with grant PID2019-104945GB-100 funded by MCIN/AEI/10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-100 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe. This work has been partially supported by the National Science Foundation under Awards ECCS-1845833 and CCF-2326559., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

A multi-armed bandit model for non-stationary wireless network selection

  • Martínez Casanovas, Lluís
  • Cabrera-Bean, Margarita|||0000-0001-9058-3825
  • Vidal Manzano, José|||0000-0002-1985-2065
The amount of wireless networks and technologies such as 5G have been rapidly increasing in the last years. With this growth in number it has become more relevant to be able to select the best network with the goal of maximizing the quality perceived by the user. The Multi-Armed Bandit (MAB) model is a viable approach to describe the problem of the best wireless network selection by a multi-Radio Access Technology (multi-RAT) device. This work proposes a new model that uses real network parameter values that change over time, that is, a non-stationary scenario. While there exist multiple MAB algorithms intended to work in stationary scenarios, this work proposes a new set of algorithms intended to work in non-stationary and more realistic environments. These new algorithms are able to measure the non-stationarity of the environment and adapt accordingly. This is especially relevant when the goal is to select among different network technologies, such as 5G, LTE or WiFi., This work was supported by the project ROUTE56 (Agencia Estatal de Investigaci´on, PID2019-104945GB-I00/AEI/10.13039/501100011033), and in part by the Grant 2017 SGR 578 (AGAUR, Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Energy driven transmission schemes for coexistence between HTC and MTC

  • Liesegang Maria, Sergi|||0000-0002-7806-4755
  • Pascual Iserte, Antonio|||0000-0001-5596-2029
  • Muñoz Medina, Olga|||0000-0002-8739-7068
Coexistence between human-type and machine-type communications is essential in future cellular networks. The former demands high data rates whereas long battery lifetimes are crucial for the latter. In this paper, we consider a setup where clusters of sensors and a set of user terminals (UTs) are served by a multiple-antenna base station (BS) that transfers power and data accordingly. Depending on the type of UT communication, half or full-duplex, data and energy are transmitted through the same signals (i.e., simultaneous wireless information and power transfer) or through separate signals, respectively. In addition, sensors also harvest energy from the signals transmitted by UTs and other active sensors. Thanks to the BS multi-antenna technology, block diagonalization is used to eliminate all the interference in the downlink. Based on that, in this paper we design transmission schemes that maximize the throughput for the UTs while guaranteeing a sufficient and fair amount of received power among all sensors in the network., The work presented in this paper was carried out within the framework of the project ROUTE56 (PID2019-104945GB-I00 / AEI / 10.13039/501100011033) and the FPI grant BES-2017-079994, both funded by the Spanish Ministry of Science and Innovation (Agencia Estatal de Investigación); and the grant 2017 SGR 578, funded by the Catalan Government (AGAUR, Departament de Recerca i Universitats, Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

RIS phase optimization for near-field 5G positioning: ML-enhanced CRLB minimization

  • Macías López, Carla
  • Saumell i Portillo, Arnau
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
  • Closas Gómez, Pau
This article addresses near-field localization using Reconfigurable Intelligent Surfaces (RIS) in 5G systems, where Line-of-Sight (LOS) between the base station and the user is obstructed. We propose a RIS phase optimization method based on the minimization of the Cramér-Rao Lower Bound (CRLB). This minimization itself is computationally costly, for which a data-driven method is employed with remarkable computational savings and positioning performance. The main contributions of this work are: (1) the application of machine learning (ML) to enhance CRLB minimization for RIS phase optimization; (2) an overview on RIS phases preprocessing methods to enhance deep neural networks training for the task; and (3) an end-to-end simulation of the positioning task with the presented method, showing a computational improvement without compromising positioning accuracy., The UPC authors are within the Signal Processing and Communications Group at UPC recognized as a consolidated research group by the Generalitat de Catalunya through 2021 SGR 01033. This publication is part of the project ROUTE56 with grant PID2019-104945GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe. This work has been partially supported by the National Science Foundation under Awards ECCS-1845833 and CCF-2326559., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Reconfigurable intelligent surfaces for receive spatial modulation in rank-deficient channels

  • Moreno Locubiche, Ainna Yue|||0009-0006-4237-7131
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Pascual Iserte, Antonio|||0000-0001-5596-2029
  • Muñoz Medina, Olga|||0000-0002-8739-7068
Receive spatial modulation (RSM) has been proposed as an effective transmission technology for next-generation wireless communications systems because of its reduced complexity and low energy consumption at the receiver end. Compared to conventional multiple-input multiple-output (MIMO) transceivers, which require one radio-frequency (RF) chain and analog-to-digital converter (ADC) per receive antenna, RSM can be implemented with one amplitude detector per antenna and a single RF chain, with mild performance degradation in terms of spectral efficiency (SE). However, its implementation using zero-forcing precoders is inadequate in mmWave channels due to the lack of propagation scattering and, hence, rank deficiency in the channel matrix. This has been only partially solved in the past using receiver antenna selection (RAS), which requires additional receive antennas. On the other hand, using reconfigurable intelligent surfaces (RIS), which can effectively create scatter and enhance the channel matrix rank, is an affordable solution that can also cope with shadowing situations and the higher path losses associated with mmWave bands. We propose using a RIS in a single-user MIMO communication with RSM to improve the downlink transmission. This paper shows that RIS-assisted RSM communication is more than a good option in mm Wave channels in terms of bit error rate due to the multipath induced in the channel and the link budget boosting., This work has been funded through the project ROUTE56 (Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, PID2019-104945GB-I00 / MCIN / AEI / 10.13039/501100011033) and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

RIS phase optimization for near-field 5G positioning: ML-enhanced CRLB minimization

  • Macías López, Carla
  • Saumell i Portillo, Arnau
  • Nájar Martón, Montserrat
  • Closas Gómez, Pau
This article addresses near-field localization using Reconfigurable Intelligent Surfaces (RIS) in 5G systems, where Line-of-Sight (LOS) between the base station and the user is obstructed. We propose a RIS phase optimization method based on the minimization of the Cramér-Rao Lower Bound (CRLB). This minimization itself is computationally costly, for which a data-driven method is employed with remarkable computational savings and positioning performance. The main contributions of this work are: (1) the application of machine learning (ML) to enhance CRLB minimization for RIS phase optimization; (2) an overview on RIS phases preprocessing methods to enhance deep neural networks training for the task; and (3) an end-to-end simulation of the positioning task with the presented method, showing a computational improvement without compromising positioning accuracy., The UPC authors are within the Signal Processing and Communications Group at UPC recognized as a consolidated research group by the Generalitat de Catalunya through 2021 SGR 01033. This publication is part of the project ROUTE56 with grant PID2019-104945GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe. This work has been partially supported by the National Science Foundation under Awards ECCS-1845833 and CCF-2326559., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Reconfigurable intelligent surfaces for receive spatial modulation in rank-deficient channels

  • Moreno Locubiche, Ainna Yue
  • Vidal Manzano, José
  • Pascual Iserte, Antonio
  • Muñoz Medina, Olga
Receive spatial modulation (RSM) has been proposed as an effective transmission technology for next-generation wireless communications systems because of its reduced complexity and low energy consumption at the receiver end. Compared to conventional multiple-input multiple-output (MIMO) transceivers, which require one radio-frequency (RF) chain and analog-to-digital converter (ADC) per receive antenna, RSM can be implemented with one amplitude detector per antenna and a single RF chain, with mild performance degradation in terms of spectral efficiency (SE). However, its implementation using zero-forcing precoders is inadequate in mmWave channels due to the lack of propagation scattering and, hence, rank deficiency in the channel matrix. This has been only partially solved in the past using receiver antenna selection (RAS), which requires additional receive antennas. On the other hand, using reconfigurable intelligent surfaces (RIS), which can effectively create scatter and enhance the channel matrix rank, is an affordable solution that can also cope with shadowing situations and the higher path losses associated with mmWave bands. We propose using a RIS in a single-user MIMO communication with RSM to improve the downlink transmission. This paper shows that RIS-assisted RSM communication is more than a good option in mm Wave channels in terms of bit error rate due to the multipath induced in the channel and the link budget boosting., This work has been funded through the project ROUTE56 (Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, PID2019-104945GB-I00 / MCIN / AEI / 10.13039/501100011033) and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Deep learning-based data fusion of 6G sensing and inertial information for target positioning: experimental validation

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Grudnitsky, Artjom
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
The sixth-generation (6G) cellular technology will be deployed with a key feature of Integrated Sensing and Communication (ISAC), allowing the cellular network to map the environment through radar sensing on top of providing communication services. In this regard, the entire network can be considered as a sensor with a broader Field of View (FoV) of the environment, assisting in both the positioning of active and detection of passive targets. On the other hand, the non-3GPP sensors available on the target can provide additional information specific to the target that can be beneficially combined with ISAC sensing information to enhance the overall achievable positioning accuracy. In this paper, we first study the performance of the ISAC system in terms of its achievable accuracy in positioning the mobile target in an indoor scenario. Second, we study the performance gain achieved in the ISAC positioning accuracy after fusing the information from the target's non-3GPP sensors. To this end, we propose a novel data fusion solution based on the deep learning framework to fuse the information from ISAC and non-3GPP sensors. We validate our proposed data fusion and positioning solution with a real-world ISAC Proof-of-Concept (PoC) as the wireless infrastructure, an Automated Guided Vehicle (AGV) as the target, and the Inertial Measurement Unit (IMU) sensor on the target as the non-3GPP sensor. The experimental results show that our proposed solution achieves an average positioning error of 3 cm, outperforming the considered baselines., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, part of this work has been supported by the German Federal Ministry of Education and Research (Foerderkennzeichen 16KISK116, KOMSENS-6G). In addition, this work is also part of the project ROUTE56 with grant PID2019-104945GBI00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Energy driven transmission schemes for coexistence between HTC and MTC

  • Liesegang Maria, Sergi
  • Pascual Iserte, Antonio
  • Muñoz Medina, Olga
Coexistence between human-type and machine-type communications is essential in future cellular networks. The former demands high data rates whereas long battery lifetimes are crucial for the latter. In this paper, we consider a setup where clusters of sensors and a set of user terminals (UTs) are served by a multiple-antenna base station (BS) that transfers power and data accordingly. Depending on the type of UT communication, half or full-duplex, data and energy are transmitted through the same signals (i.e., simultaneous wireless information and power transfer) or through separate signals, respectively. In addition, sensors also harvest energy from the signals transmitted by UTs and other active sensors. Thanks to the BS multi-antenna technology, block diagonalization is used to eliminate all the interference in the downlink. Based on that, in this paper we design transmission schemes that maximize the throughput for the UTs while guaranteeing a sufficient and fair amount of received power among all sensors in the network., The work presented in this paper was carried out within the framework of the project ROUTE56 (PID2019-104945GB-I00 / AEI / 10.13039/501100011033) and the FPI grant BES-2017-079994, both funded by the Spanish Ministry of Science and Innovation (Agencia Estatal de Investigación); and the grant 2017 SGR 578, funded by the Catalan Government (AGAUR, Departament de Recerca i Universitats, Generalitat de Catalunya)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

RIS-aided location estimation based on MVDR in near-field conditions

  • Pastor Redondo, Adrian
  • Pascual Iserte, Antonio
  • Muñoz Medina, Olga
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper, we propose a reconfigurable intelligence surface (RIS)-aided location system. Through such a system, we exploit that near-field (NF) effects are still significant at long distances in mm-wave bands (i.e., up to the Fraunhofer distance) for large RISs. Specifically, we leverage the wavefront curvature, which depends on the impinging direction of arrival and the distance to the RIS, to locate emitting sources. As the location procedure cannot directly access the signals at a passive RIS, our method uses the signals reflected by the RIS that impinge on an antenna array located close to the RIS. By processing the signals the array collects, we estimate the spatial power density in a given region using a minimum variance distortionless response (MVDR) estimator. As shown in the paper, this technique can precisely estimate the positions of a set of sources within the NF region of the RIS. Even though the signals that are processed are those collected by the antenna array and not the signals at the RIS, the proposed system can provide a much higher location accuracy than a system with only the antenna array without RIS. We also extend the approach to scenarios with multiple RIS-array pairs., This work has been funded through project ROUTE56 (PID2019- 104945GB-I00) funded by MCIN/AEI/10.13039/501100011033; project 6-SENSES (PID2022-138648OB-I00) funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, EU; and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Impact of near-field conditions on the performance of RIS-aided mmWave communication strategies

  • Campoy García, David
  • Muñoz Medina, Olga
  • Pascual Iserte, Antonio
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper, we consider a reconfigurable intelligent surface (RIS)-based transmitter operating in a high-frequency band that sends more symbols per channel use than the number of antennas at the receiver. For such a system, we present a comprehensive study on the design and performance of a neural network (NN)-based receiver. We evaluate the performance of the minimum mean squared error (MMSE) receiver, which is a linear receiver, the optimum maximum likelihood (ML) detector, and the NN-based receiver for recovering the transmitted symbols. The numerical simulations carried out for all the detectors considered prove that the classical far-field simplification leads to a performance underestimation in scenarios involving wide transmitters and high-frequency bands, as the one considered in this paper. Moreover, the results show that the NN-based receiver achieves a favorable trade-off between complexity and performance, outperforming the MMSE receiver while maintaining a lower complexity than the ML detector., This work has been funded through project ROUTE56 (PID2019- 104945GB-I00) funded by MCIN/AEI/10.13039/501100011033; project 6-SENSES (PID2022-138648OB-I00) funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, EU; and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A survey of 5G-based positioning for industry 4.0: state of the art and enhanced techniques

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
The fifth generation (5G) mobile communication technology integrates communication, positioning, and mapping functionalities as an in-built feature. This has drawn significant attention from industries owing to the capability of replacing the traditional wireless technologies used in industries with 5G infrastructure that can be used for both connectivity and positioning. To this end, we identify the Automated Guided Vehicle (AGV) as a primary use case to benefit from the 5G functionalities. Given that there have been various works focusing on 5G positioning, it is necessary to analyze the existing works about their applicability with AGVs in industrial environments and provide insights to future research. In this paper, we present state of the art in 5G-based positioning, with a focus on key features, such as Millimeter Wave (mmWave) system, Massive Multiple Input Multiple Output (MIMO), Ultra-Dense Network (UDN), Device-to-Device (D2D) communication, and Reconfigurable Intelligent Surface (RIS). Moreover, we present the shortcomings in the current state of the art. Additionally, we propose enhanced techniques that can complement the accuracy of 5G-based positioning in controlled industrial environments., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, partially funded through the project ROUTE56 (funded by the Agencia Estatal de Investigacion, PID2019-104945GB- I00 / AEI / 10.13039/501100011033)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Hierarchical beamforming in random access channels

  • Agustín de Dios, Adrián
  • Cabrera-Bean, Margarita
  • Vidal Manzano, José
Managing a massive number of terminals in a contention-based multiple access is challenging due to its intrinsic limited efficiency. For example, in the random access channel considered in LTE-A and 5G NR, Base Station (BS) is just aware of the collided and non-collided preambles. Several time-based protocols have been investigated to redistribute the overload under high terminal activity, thus avoiding the congestion. In this work, we explore the use of the spatial domain by means of a hierarchical codebook-based beamforming, where the BS selects the appropriate beams as a function of the number of non-collided and collided preambles. Since the activity and placement of terminals may be dynamic over time, the sequential selection of parameters can benefit from a reinforcement learning (RL) framework. We propose an algorithm that can exploit both domains, temporal and spatial, with the goal of reducing collisions and enhancing transmission delay. Our approach is able to efficiently learn whenever there is a non-homogeneous spatial distribution of terminals and adapt the spatial beams accordingly., The work of A.Agustin was supported by the Spanish Government through the Statistical Learning and Inference for Large Dimensional Communication Systems (ARISTIDES, RTI2018-099722-B-100) Project. The work of J.Vidal and M.Cabrera-Bean was supported by the project ROUTE56 (Agencia Estatal de Investigación, PID2019-104945GB-I00/AEI/10.13039/501100011033), and in part by the Grant 2017 SGR 578 (AGAUR, Generalitat de Catalunya)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Correlated binary data for machine learning

  • Llobet Turró, Martí
  • Cabrera-Bean, Margarita
Data sets containing instances that are assigned values by an ensemble of annotators of unknown accuracy are becoming increasingly common. Binary, potentially correlated data are frequent in a number of disciplines, and thus eligible to be exploited by ensemble meta-learners. A prior key step is testing the meta-learners with synthetic data sets featuring realistic correlation patterns, which is the main scope of this work. To achieve this goal, two challenges are faced: (i) finding out a new correlated pattern to model Bernoulli random variables, and (ii) obtaining a process to generate realistic synthetic data sets. A comparative analysis and performance results are provided for two methods of artificial data generation. The methods are also tested using two state-of-the-art binary ensemble meta-learners that consider inter-classifier dependencies., This work was supported by the project ROUTE56 (Agencia Estatal de Investigacion, PID2019-104945GB-I00/AEI/10.13039/501100011033), and in part by the Grant 2017 SGR 578 (AGAUR, Generalitat de Catalunya)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A multi-armed bandit model for non-stationary wireless network selection

  • Martínez Casanovas, Lluís
  • Cabrera-Bean, Margarita
  • Vidal Manzano, José
The amount of wireless networks and technologies such as 5G have been rapidly increasing in the last years. With this growth in number it has become more relevant to be able to select the best network with the goal of maximizing the quality perceived by the user. The Multi-Armed Bandit (MAB) model is a viable approach to describe the problem of the best wireless network selection by a multi-Radio Access Technology (multi-RAT) device. This work proposes a new model that uses real network parameter values that change over time, that is, a non-stationary scenario. While there exist multiple MAB algorithms intended to work in stationary scenarios, this work proposes a new set of algorithms intended to work in non-stationary and more realistic environments. These new algorithms are able to measure the non-stationarity of the environment and adapt accordingly. This is especially relevant when the goal is to select among different network technologies, such as 5G, LTE or WiFi., This work was supported by the project ROUTE56 (Agencia Estatal de Investigaci´on, PID2019-104945GB-I00/AEI/10.13039/501100011033), and in part by the Grant 2017 SGR 578 (AGAUR, Generalitat de Catalunya)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

RIS phase optimization for near-field 5G positioning: CRLB minimization

  • Macías López, Carla
  • Nájar Martón, Montserrat
  • Closas Gómez, Pau
This article addresses near-field localization using Reconfigurable Intelligent Surfaces (RIS) in 5G systems, where Line-of-Sight (LOS) between the base station and the user is obstructed. We propose a RIS phase optimization method based on the minimization of the Cramér-Rao Lower Bound (CRLB) for position estimation. The main contributions of the article are: (1) the derivation of the CRLB to optimize the RIS configuration; and (2) the application of the mentioned framework in nearfield considering reflective RIS. The proposed method is validated with simulations, showing an accuracy improvement of RIS phase optimization with respect to the state-of-the-art methods., The UPC authors are within the Signal Processing and Communications Group at UPC recognized as a consolidated research group by the Generalitat de Catalunya through 2021 SGR 01033. This publication is part of the project ROUTE56 with grant PID2019-104945GB-100 funded by MCIN/AEI/10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-100 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe. This work has been partially supported by the National Science Foundation under Awards ECCS-1845833 and CCF-2326559., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Outlier rejection for 5G-based indoor positioning in ray-tracing-enabled industrial scenario

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
The precise and accurate indoor positioning using cellular communication technology remains to be a prerequisite for several industrial applications, including the emergence of a new topic of Integrated Sensing and Communication (ISAC). However, the frequently occurring Non-Line-of-Sight (NLoS) conditions in a heavy multipath dominant industrial scenario challenge the wireless signal propagation, leading to abnormal estimation errors (outliers) in the signal measurements taken at the receiver. In this paper, we investigate the iterative positioning scheme that is robust to the outliers in the Time of Arrival (ToA) measurements. The Iteratively Reweighted Least Squares (IRLS) positioning scheme formulated on the Least Squares (LS) is implemented to reject the outlier measurements and reweight the available ToA samples based on their confidence. Our positioning scheme is validated under 5G frequency bands, including the C-band (3.7 GHz) and the mmWave-band (26.8 GHz) in a Ray-Tracing enabled industrial scenario with different emulation setups., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, this work is part of the project ROUTE56 with grant PID2019-104945GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Contextual multi-armed bandits for non-stationary wireless network selection

  • Martínez Casanovas, Lluís
  • Vidal Manzano, José
  • Cabrera-Bean, Margarita
As the number of wireless technologies (4G, 5G, 802.11ax and other) have been rapidly increasing, so have the number of wireless networks concurrently deployed on a given coverage area. As a result, the judicious selection of the network that maximizes the quality perceived by a user terminal has become a significantly relevant problem. Contextual Multi-Armed Bandits (CMAB) are viable models to approach the problem. While multiple CMAB algorithms have been designed, most of them are only suited for stationary environments. This work proposes a new set of network selection algorithms that relate the traffic type (used as contextual information) to the perceived quality of the available networks for non-stationary scenarios. Results show significantly improved performance when compared to non-adaptive approaches., This work has been funded through the project ROUTE56 (Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, PID2019-104945GB-I00/ AEI / 10.13039/501100011033) and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Peer Reviewed, Postprint (author's final draft)