Skip to main content

ANTENAS X-WAVE MULTIMODO Y MULTIHAZ RECONFIGURABLES PARA SISTEMAS DE COMUNICACIONES Y SENSORES

PID2019-107885GB-C32

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Dual-Band Planar Antenna with AMC Screen for On-Body Applications

  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
  • Chuquitarco-Jiménez, C. A.
  • Abderrazak, F.
[EN] This paper presents a dual-band planar meander line antenna with an AMC screen for on-body applications. The antenna is aimed to operate at 0.86 and 2.4 GHz. The AMC screen is used to mitigate the effect of the human body into the antenna performance, so it has been designed to work appropriately in the two bands. Simulations of the AMC unit cell and the integration with the meander line antenna will be shown., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio de Ciencia e Innovación) under project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Eight-Port Wideband MIMO Antenna for Sub-6 GHz 5G Base Stations

  • Molins-Benlliure, Jaime
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] An eight-port wide-band multiple-input multiple-output (MIMO) antenna is presented for base stations applications. The antenna is composed by four unit cells (2×2) separated by a cross-shaped isolating block with a total size of 220×220×28 mm ` (2.42¿×2.42¿×0.3¿ , at central frequency f=fc=3.3 GHz). The unit cell is defined by a square cavity-backed antenna fed with two I-shaped crossed dipoles. The antenna provides 8 independent ports with 21.5 dB of minimum isolation and an impedance bandwidth (S11<¿10dB) of 97% ranging at 1.8-5 GHz. Results show an efficiency higher than 87%, unidirectional radiation patterns and low envelope correlation coefficient. The geometry of the antenna is suitable for scaling this design to a massive MIMO system with the replication of the proposed antenna., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio de Ciencia e Innovacion) under project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Multiport broadband 5G MIMO antenna with very high isolation

  • Llanga-Vargas, Aníbal
  • Peñafiel-Ojeda, Carlos Ramiro
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper presents a new unidirectional radiating structure with 4 independent radiation patterns, with an isolation of more than 24 dB, and with a bandwidth of 20 %, oriented for use in 5G indoor MIMO base stations. The element can be used as a building block for arrays with a number of antennas of 4x4 or more. The radiating elements are triangular cavities derived from a square cavity with the TMz 11 mode. The 4-port antenna has a very low profile, with a height of 5 mm and the dimensions of the ground plane are less than one wavelength., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovacion) under project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

PIFA antenna for smart watch application in the 2.4 GHz band

  • Abdelhakim, Adli
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper presents a Planar Inverted-F Antenna (PIFA) design for a smartwatch application, optimized to operate on the 2.4 GHz Bluetooth frequency band, on the proximity of the human forearm. The PIFA antenna is mounted on the watchstrap that is used as the antenna substrate. The antenna is fed in a singular way, since a coplanar wave-guide (CPW) transmission line is used to excite the antenna. The antenna is integrated in the watchstrap, curved over the phantom forearm and simulated along with the watchcase. A return loss of ¿20 dB is obtained at 2.4 GHz, and an efficiency of ¿5 dB, which represents a good efficiency taking into account the effect of the human forearm., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovación) under project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Design of a PIFA antenna integrated in the watchstrap for smart watch application in the 2.4 GHz Bluetooth band

  • Abdelhakim, Adli
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper presents a Planar Inverted-F Antenna (PIFA) design for a smartwatch application, optimized to operate on the 2.4 GHz Bluetooth frequency band, on the proximity of the human forearm. The PIFA antenna is mounted on the watchstrap that is used as the antenna substrate. The antenna is fed in a singular way, since a coplanar wave-guide (CPW) transmission line is used to excite the antenna. The antenna is integrated in the watchstrap, curved over the phantom forearm and simulated along with the watchcase. A return loss of ¿20 dB is obtained at 2.4 GHz, and an efficiency of -5 dB, which represents a good efficiency taking into account the effect of the human forearm., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovación) under project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Antena de cuatro puertos de banda ancha con bloque aislante para estaciones base 5G Sub-6 GHz

  • Molins-Benlliure, Jaime
  • Jofre-Roca, L.
  • Juan-Llacer, L.
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[ES] Este artículo propone una antena de cuatro puertos con respaldo de cavidad de banda ancha para aplicaciones de estaciones base interiores. La antena esta compuesta por una cavidad abierta de forma cuadrada con un bloque aislante en forma de X situado en el centro y 4 monopolos dispuestos de forma simétrica en la apertura de la cavidad. Para su diseño se ha utilizado una metodología basada en el análisis de modos característicos (CMA) para identificar los modos que contribuyen al acoplamiento y justificar el uso del bloque en forma de X para incrementar el aislamiento entre puertos. La antena dispone de cuatro diagramas de radiación unidireccionales y un ancho de banda (S11<-10 dB) que opera desde 1.55 hasta los 6 GHz (118 %), cubriendo la mayoría de las bandas 5G sub-6 GHz. El aislamiento entre puertos es de mínimo 16 dB y la eficiencia superior al 84 %. La antena es de fácil fabricación y presenta un tamaño compacto de 129.5×129.5×28.2 mm3 (0.68¿×0.68¿×0.15¿, a la frecuencia mínima f=fmin=1.55 GHz).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Optimization of 2D Heterogeneous Lenses via BFGS and Volume Integral Equation Method

  • Vico Bondía, Felipe|||0000-0003-1292-3657
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
  • Antonino Daviu, Eva|||0000-0002-0163-4561
[EN] In this paper we apply a quasi-Newton optimization algorithm called BFGS to optimize heterogeneous lenses in 2D by using the volume integral equation method. Different preliminary designs are presented with frequency selective focal point., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovacion) under project PID2019-107885GB-C32. We would like to thank Prof. Leslie Greengard and for many useful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Análisis de las pérdidas de propagación medidas en una plantación de cítricos en las bandas de 1800 MHz, 2100 MHz, 3.5 GHz y 28 GHz en una situación de LoS

  • Juan-Llácer, Leandro
  • Martínez Rubiola, Luis
  • Molina-García-Pardo, José María
  • Martínez-Inglés, María Teresa
  • Rodríguez, José-Víctor
  • Pascual-García, Juan
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] Agriculture 4.0 is going to represent a massive deployment of sensors, so efficient planning of radiocommunication systems in this type of environment will be necessary. In this work, the measured path loss in a LoS situation, with the transmitter and receiver heights below the trees height, at a citrus plantation in the 1800MHz, 2100MHz, 3.5GHz and 28GHz frequency bands using the FI (Floating Intercept) and the CI (Close-In reference) models has been analyzed. It has been observed that from 3.5GHz, the slope of the FI model also represents the propagation exponent (PLE). Furthermore, a guiding effect (PLE less than 2) has been observed in the 1800MHz and 2100MHz bands, not in the 3.5GHz and 28GHz bands, in which the PLE is practically equal to 2 (free space). Finally, the analysis of the polarization reveals that the standard deviation of the measured values with respect to the values obtained from the models is greater for horizontal than vertical polarization in the 1800MHz and 2100MHz frequency bands., Este trabajo ha sido financiado por la Comunidad Autónoma de la Región de Murcia a través del proyecto 20804/PI/18 de la convocatoria de Ayudas a proyectos para el desarrollo de investigación científica y técnica por grupos competitivos, incluida en el Programa Regional de Fomento de la Investigación (Plan de Actuación 2019) de la Fundación Séneca, Agencia de Ciencia y Tecnología de la Región de Murcia y por el Ministerio de Economía y Competitividad MINECO (PID2019-107885GB-C33).