Skip to main content

FLUENCIA Y FATIGA EN ELEMENTOS ESTRUCTURALES DE HORMIGON REFORZADO CON FIBRAS

PID2019-108978RB-C32

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Macro-synthetic fibre reinforced concrete partition walls for buildings. Part 1: experimental programme and real-scale prototype

  • Fernández Ruíz, Miguel
  • Redaelli, Dario
  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Monserrat López, Andrea|||0000-0002-1480-4021
  • Bourqui, Didier
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
The use of conventional reinforced concrete for building partition walls has proven several benefits in terms of acoustic performance and robustness. Horizontal reinforcement is typically governing in their design, and arranged to control cracking due to shrinkage and imposed deformations. In view of reducing material consumption and CO2eq, an alternative reinforcement concept based on the use of macro-synthetic fibres (MSFRC) is proposed in this paper and applied in practice within an actual building recently completed in Switzerland. This paper collects the research and practical experiences of the authors and aims at addressing questions that may arise during the construction and design stage of such members. To this end, a real-scale cast-in-situ MSFRC prototype wall of h/b/t = 2.8/1.2/0.15 m was cast. The objective is to shed some light on the casting procedure for wall elements and to assess the mechanical and rheological properties of the mix and fibre distribution and orientation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Macro-synthetic fibre reinforced concrete partition walls for buildings. Part 2: experimental programme on walls cast on site

  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Fernández Ruíz, Miguel
  • Redaelli, Dario
  • Monserrat López, Andrea|||0000-0002-1480-4021
  • Bourqui, Didier
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
In the context of an experimental programme on the use of macrosynthetic fibre reinforced concrete (MSFRC) for casting building partition walls, three walls from a residential building in Switzerland were selected for an onsite application (with lengths varying between 2.8 and 13 m). The walls had an amount of fibres equal to 4 kg/m3 and only conventional reinforcement at the construction joints with adjacent walls. In addition, specimens were cast in order to measure the strength, rheological properties and characterise the post-cracking behaviour of MSFRC. A crack monitoring protocol was conducted on the walls for crack detecting and tracking their evolution over time, with no noticeable cracks in the short walls. The cracks detected for the 13 m-long wall were measured and the results summarized in this document. This research contribution aims at showcasing the use of MSFRC as an alternative to ordinary reinforcement for building partition walls, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Cement composite panels reinforced with textile waste and flax nonwoven fabrics: flexural and accelerated aging performance

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
Towards more eco-friendly building materials, nonwoven fabrics from natural-based (flax) and recycled (textile waste) fibers were produced and incorporated into the cementitious composite panels. The textile waste fibers were recovered from two different clothing sources including fashion and fire-proofing garments. The flexural and durability (through forced wet-dry aging cycles) properties of the laminated sandwich-like cement panels reinforced with four different nonwoven fabrics (flax, treated flax, hybrid fashion textile waste/flax, and fire-proofing textile waste) were analyzed. Based on the results, all four different composites showed promising flexural-hardening behaviors in unaged conditions, especially those reinforced with the treated flax or hybrid fabrics which reached flexural strength of more than 16 MPa and energy ab-sorption index of more than 10 kJ/m2. After wet-dry aging, the post-cracking performance of all composites degraded due to fiber embrittlement, this was more evident for untreated flax composite (reduced by ~65%). Nonetheless, the treated flax fabric composite and hybrid fabric composite containing silica fume could show a better performance after aging., The authors express their gratitude to the Agencia Estatal de Investigación, Spanish Ministry of Economy, Industry, and Competitiveness (Government of Spain) for the financial support received under the scope of the projects RECYBUILDMAT (PID2019-108067RB-I00/AEI/10.13039/501100011033); 3D-Crete (2019PROD00066/IU68-017262-Codi project: J-02696); and CREEF (PID2019-108978RB-C32/AEI/10.13039/501100011033). The first author acknowledges the Banco Santander for the Research Scholarships (Postdoc-UPC 2022 Grant).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Rotation and redistribution capacity of continuous fibre reinforced beams with varying reinforcement ratios

  • Nogales, Alejandro
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
The addition of fibres in concrete has been proven as a competitive solution for structural purposes, either using simply fibre reinforced concrete (FRC) or combining fibres with traditional steel reinforcement to produce hybrid reinforced concrete (HRC). Numerous research has demonstrated the benefits of adding fibres in terms of ductility, post-cracking strength, crack spacing, durability, crack width reduction, enhancement against impact, etc. For structural elements subjected to bending, such as beams, it is known that the use of FRC is beneficial for controlling crack spacing, crack widths, and deflections (i.e., serviceability limit states) but there is still a lot of research to be done in terms of ultimate limit state behaviour. This is particularly true for lightly reinforced specimens in which the addition of fibres may result in a reduction of deformation capacity, a softening response after cracking and a loss of ductility with respect to those without fibres, compromising the rotational capacity and therefore the moment redistribution capacity for statically indeterminate structures. In this regard, this research contribution presents a numerical parametric study of continuous beams cast with different FRC classes (according to fib MC2010) along with different reinforcing ratios of longitudinal reinforcement (varying from 0.13% up to 1.14%). The main goal of this research contribution is to assess the ductility, bearing capacity, ultimate plastic rotation and redistribution capacity of such members. The parametric study has been implemented by means of a finite element model (FEM) previously validated using actual tests published that can be found in the literature. The results showed that there is a significant reduction of rotation capacity and moment redistribution for lightly reinforced beams. The results of this study can provide a contribution towards safer structural design of HRC members., The authors express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32). Likewise, the first author acknowledges the Spanish Ministry of Science, Innovation and University for providing support through the PhD Industrial Fellowship (DI-17-09390) in collaboration with Smart Engineering Ltd. (UPC’s Spin-Off).
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Predicting flexural post-cracking strength of fiber-reinforced concrete in the Barcelona test using a neural network-aided approach

  • Ikumi Montserrat, Tai|||0000-0001-9547-5241
  • Galeote Moreno, Eduardo|||0000-0001-8370-4043
  • Pujadas Álvarez, Pablo|||0000-0001-5634-7431
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • López Carreño, Rubén-Daniel|||0000-0003-1040-5135
Structural fibers represent an effective strategy for enhancing the post-cracking tensile strength (fctR) of concrete. Currently, the characterization of this property relies predominantly on experimental methods, introducing uncertainties during the design phase and impeding advancements in new fiber types or the optimization of existing ones. This paper introduces a multilayer perceptron neural network designed to predict the fctR of fiber-reinforced concrete (FRC) undergoing the Barcelona Test. The optimal architecture of the predictor is determined through the evaluation of 9216 configurations involving input dimensions and the number of hidden layers and neurons. Generalization performance is rigorously assessed using repeated random sub-sampling validation across 50 iterations. The finalized model demonstrates a high accuracy in predicting fctR for various cracking stages in FRC (R2 of 0.87, 0.86, and 0.83). A comprehensive parametric analysis is conducted to establish coherence between the model's predictions and the established understanding of FRC behavior. Furthermore, numerical expressions are presented as an alternative tool to traditional testing, offering predictions for the residual strength of the Barcelona Test. These predictions consider factors such as fiber dosage, concrete strength, specimen type, height, and fiber geometric characteristics, serving as valuable tools for pre-design and quality control purposes. Such approaches are essential for fostering advancements in FRC technology., T. Ikumi is supported by the Torres Quevedo programme PTQ2018-009877 sponsored by the Spanish Ministry of Science and Innovation. The authors also express their gratitude to the same Spanish Ministry for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32) and to the Catalan agency AGAUR trough their research groups support program (2021 SGR 00341). Finally, P. Pujadas wishes to recognise the support from Serra Hunter programme.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Effect of sustained load on the flexural bearing capacity of polypropylene fibre and minimum steel-bar reinforced concrete beams

  • Tošić, Nikola|||0000-0003-0242-8804
  • Hunger, Martin
  • Vaquero Martinez, José María
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Macro-synthetic fibres are becoming increasingly attractive as concrete reinforcement in structural applications, polypropylene fibre reinforced concrete, and macro-synthetic fibre reinforced concrete (MSFRC) in general, being an example of this tendency. Nonetheless, further knowledge needs to be gathered in relation with the time-dependant properties (i.e., creep) of the MSFRCs when its use is oriented to design-for-cracking structural elements. For this purpose, an extensive experimental programme was carried out on the flexural load bearing capacity of full-scale MSFRC beams (with mini-mum conventional steel reinforcement). Namely, beams with spans of 3 m and cross-section size of 200×250 mm were produced from a C40/50 concrete with 0 (reference), 3 and 9 kg/m3 of polypropylene fibres. Four beams were cast from each concrete type. After 28 days, two beams from each concrete type were tested until failure in three-point bending configuration. Then, one beam from each concrete was placed under sustained load for one year in a four-point bending configuration, whereas another beam from each concrete was left unloaded for one year under the same environmental conditions. After one year, both remaining beams from each concrete were tested until failure in bending. The results of the tests allowed assessing the effects of the sustained load on the remaining bearing capacity of the beams and confirming that the inclusion of a minimum steel-bar reinforcement was sufficient to prevent the beams from uncontrolled deformations triggered by tertiary tensile creep. The results were accompanied by full physical-mechanical characterization of the concretes. The preliminary results presented herein allow confirming that using MSFRC in cracking-allowed structural applications -with at least minimum mechanical (as per codes) steel-bar reinforcement amount- is reliable from the structural standpoint., The authors want also express their gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (Creep and Fatigue of fibre reinforced concrete elements) (PID2019-108978RB-C32). This study has also received funding from Master Build-ers Solutions. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or rec-ommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Reliability-based assessment of the Eurocode 2-revision and fib Model Code 2020 shear strength models for fibre reinforced concrete members without shear reinforcement

  • Tošić, Nikola|||0000-0003-0242-8804
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Fernández Ruíz, Miguel
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Structural design of fibre reinforced concrete (FRC) was first introduced on an international level in the fib Model Code 2010. Since then, and facilitated by this and many other advances in research and practice, its market uptake and practical applications have increased substantially. This has been recognized by policy makers and thus, provisions for FRC structural design are also being introduced into the Eurocode 2-revision (prEN1992-1-1:2021) as well as the new fib Model Code 2020. However, such changes also carry a significant responsibility of a comprehensive reliability assessment of the proposed design models. One of the most important aspects of ultimate limit state (ULS) design of FRC is the shear strength of members without shear reinforcement, mostly due to the associated uncertainty and potentially brittle failure modes. Within this frame, this paper presents a reliability-based assessment and calibration of the partial factor for FRC. To do this, the safety format of the Eurocode 2-revision and fib Model Code 2020 models for the shear strength of FRC members without shear reinforcement are assessed and the resulting partial safety factors for FRC are determined. First, a database of experimental results on FRC beams is used to determine model errors. On that basis, a probabilistic analysis is performed using the First Order Reliability Method to determine adequate values of the partial factor for varying target reliability indexes. Finally, a discussion is presented on how the proposed models can ensure typical reliability indexes adopted for ULS design., This study has received funding from the European Union’s Horizon 2020 research and innovation pro-gramme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Structural performance of chloride-corroded hybrid fibre-reinforced concrete under sustained loads

  • Bajic, Petar
  • Leporace Guimil, Bruno
  • Andrade Perdrix, Carmen
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Cracks in concrete act as preferential pathways for agents from the exterior, which may trigger detrimental corrosion processes. The addition of fibres to concrete is reported to alter cracking formation and to improve its post-cracking behaviour. This paper an experimental campaign with the objective of comparing the structural performance of two types of reinforced concrete ele-ments subjected to chloride ingress: conventionally reinforced and reinforced using a hybrid approach, where in addition to steel bars, fibres are also used. Specimens were exposed to 3% NaCl under varying cracking conditions. Non-destructive tests (corrosion potential, corrosion current and resistivity of the concrete matrix) were used to monitor corrosion. After the exposure, specimens were subjected to bending until failure in a three-point bending test. In all specimens, corrosion initiation during the first month was detected based on the value of corrosion potential below –200 mV. In the third month of exposure, one specimen showed signs of a high corrosion rate (1.48 µA/cm2), whereas others showed signs of moderate corrosion (0.13–0.78 µA/cm2). Based on visual inspection, corrosion products were observed to concentrate in cracked regions of all specimens.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Analysis of design constitutive model for plastic fibre reinforced concrete through inverse analysis

  • Galeote Moreno, Eduardo|||0000-0001-8370-4043
  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
The increasing use of fibre reinforced concrete (FRC) as a structural material requires a constant development of new tools for design purposes. In this line, different codes and guidelines include constitutive models for FRC in their specifications. However, these constitutive models are usually based on the behaviour of steel fibre reinforced concrete (SFRC) and present several limitations on representing the full behaviour of macro-synthetic fibre reinforced concrete (MSFRC). With the aim of analysing the suitability of the constitutive models when applied on macro-synthetic fibres, an experimental program to determine the performance of MSFRC using different fibre contents and concrete mixes was performed. The study of the constitutive models was conducted through an inverse analysis using a two-dimensional analytical model to verify and compare the FRC constitutive equations of the MC2010 with the experimental results. The constitutive model of MC2010 was selected given that it is able to capture both the softening and hardening behaviour of FRC through a three-point constitutive equation. The results show that the original constitutive model of the MC2010 tends to overestimate the performance of PFRC. Moreover, it could be necessary to include an additional point on the post-cracking branch of the constitutive model to represent more accurately the full residual strength of PFRC. The results also show that the ultimate strain of the constitutive model should be extended to fully capture the performance of PFRC, especially for large deformations. This study suggests that it should be necessary to redefine the constitutive models through a new approach distinguishing between FRC blended with steel or macro-synthetic fibres., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Durability of eco-friendly strain-hardening cementitious composite incorporating recycled textile waste fabric and silica fume

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
To reach carbon neutrality, the use of more eco-friendly building materials derived from recycled resources and industrial by-products has been widely encouraged. The use of Portland cement (PC) and concrete as the most used material in the world, after water, ends in the release of million tonnes of CO2 into the atmosphere. On the other hand, fast fashion in the garment industry has resulted in a massive volume of textile waste (TW) that ends up in landfills worldwide. In this regard, a cementitious composite containing industrial by-products as a partial replacement of PC reinforced with recycled TW fibers could be a viable option in terms of both durability and sustainability. In this study, the durability of the hybrid TW/falx nonwoven fabric-reinforced cement composite modified with 30% Silica Fume (SF) was investigated by determining the effect of accelerated wet /dry cycles on the mechanical behavior (through the flexural test) and microstructural characteristics (through scanning and backscat-tered electron microscope). The results show that there was a negligible difference between the mechanical properties of the laminated composite treated with SF with respect to the one without SF in unaged conditions. Nonetheless, after accelerated aging, the fibers in the former could maintain their strength and flexibility, resulting in the composite with better post-cracking mechanical parameters by 40%. © 2022, fib. The International Federation for Structural Concrete. All rights reserved.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Reliability-based assessment of the Eurocode 2-revision and fib Model Code 2020 shear strength models for fibre reinforced concrete members without shear reinforcement

  • Tošić, Nikola
  • Bairán García, Jesús Miguel
  • Fernández Ruíz, Miguel
  • Fuente Antequera, Albert de la
Structural design of fibre reinforced concrete (FRC) was first introduced on an international level in the fib Model Code 2010. Since then, and facilitated by this and many other advances in research and practice, its market uptake and practical applications have increased substantially. This has been recognized by policy makers and thus, provisions for FRC structural design are also being introduced into the Eurocode 2-revision (prEN1992-1-1:2021) as well as the new fib Model Code 2020. However, such changes also carry a significant responsibility of a comprehensive reliability assessment of the proposed design models. One of the most important aspects of ultimate limit state (ULS) design of FRC is the shear strength of members without shear reinforcement, mostly due to the associated uncertainty and potentially brittle failure modes. Within this frame, this paper presents a reliability-based assessment and calibration of the partial factor for FRC. To do this, the safety format of the Eurocode 2-revision and fib Model Code 2020 models for the shear strength of FRC members without shear reinforcement are assessed and the resulting partial safety factors for FRC are determined. First, a database of experimental results on FRC beams is used to determine model errors. On that basis, a probabilistic analysis is performed using the First Order Reliability Method to determine adequate values of the partial factor for varying target reliability indexes. Finally, a discussion is presented on how the proposed models can ensure typical reliability indexes adopted for ULS design., This study has received funding from the European Union’s Horizon 2020 research and innovation pro-gramme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Structural performance of chloride-corroded hybrid fibre-reinforced concrete under sustained loads

  • Bajic, Petar
  • Leporace Guimil, Bruno
  • Andrade Perdrix, Carmen
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
Cracks in concrete act as preferential pathways for agents from the exterior, which may trigger detrimental corrosion processes. The addition of fibres to concrete is reported to alter cracking formation and to improve its post-cracking behaviour. This paper an experimental campaign with the objective of comparing the structural performance of two types of reinforced concrete ele-ments subjected to chloride ingress: conventionally reinforced and reinforced using a hybrid approach, where in addition to steel bars, fibres are also used. Specimens were exposed to 3% NaCl under varying cracking conditions. Non-destructive tests (corrosion potential, corrosion current and resistivity of the concrete matrix) were used to monitor corrosion. After the exposure, specimens were subjected to bending until failure in a three-point bending test. In all specimens, corrosion initiation during the first month was detected based on the value of corrosion potential below –200 mV. In the third month of exposure, one specimen showed signs of a high corrosion rate (1.48 µA/cm2), whereas others showed signs of moderate corrosion (0.13–0.78 µA/cm2). Based on visual inspection, corrosion products were observed to concentrate in cracked regions of all specimens., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Durability of eco-friendly strain-hardening cementitious composite incorporating recycled textile waste fabric and silica fume

  • Sadrolodabaee, Payam
  • Claramunt Blanes, Josep
  • Ardanuy Raso, Mònica
  • Fuente Antequera, Albert de la
To reach carbon neutrality, the use of more eco-friendly building materials derived from recycled resources and industrial by-products has been widely encouraged. The use of Portland cement (PC) and concrete as the most used material in the world, after water, ends in the release of million tonnes of CO2 into the atmosphere. On the other hand, fast fashion in the garment industry has resulted in a massive volume of textile waste (TW) that ends up in landfills worldwide. In this regard, a cementitious composite containing industrial by-products as a partial replacement of PC reinforced with recycled TW fibers could be a viable option in terms of both durability and sustainability. In this study, the durability of the hybrid TW/falx nonwoven fabric-reinforced cement composite modified with 30% Silica Fume (SF) was investigated by determining the effect of accelerated wet /dry cycles on the mechanical behavior (through the flexural test) and microstructural characteristics (through scanning and backscat-tered electron microscope). The results show that there was a negligible difference between the mechanical properties of the laminated composite treated with SF with respect to the one without SF in unaged conditions. Nonetheless, after accelerated aging, the fibers in the former could maintain their strength and flexibility, resulting in the composite with better post-cracking mechanical parameters by 40%. © 2022, fib. The International Federation for Structural Concrete. All rights reserved., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Cement composite panels reinforced with textile waste and flax nonwoven fabrics: flexural and accelerated aging performance

  • Sadrolodabaee, Payam
  • Ardanuy Raso, Mònica
  • Fuente Antequera, Albert de la
  • Claramunt Blanes, Josep
Towards more eco-friendly building materials, nonwoven fabrics from natural-based (flax) and recycled (textile waste) fibers were produced and incorporated into the cementitious composite panels. The textile waste fibers were recovered from two different clothing sources including fashion and fire-proofing garments. The flexural and durability (through forced wet-dry aging cycles) properties of the laminated sandwich-like cement panels reinforced with four different nonwoven fabrics (flax, treated flax, hybrid fashion textile waste/flax, and fire-proofing textile waste) were analyzed. Based on the results, all four different composites showed promising flexural-hardening behaviors in unaged conditions, especially those reinforced with the treated flax or hybrid fabrics which reached flexural strength of more than 16 MPa and energy ab-sorption index of more than 10 kJ/m2. After wet-dry aging, the post-cracking performance of all composites degraded due to fiber embrittlement, this was more evident for untreated flax composite (reduced by ~65%). Nonetheless, the treated flax fabric composite and hybrid fabric composite containing silica fume could show a better performance after aging., The authors express their gratitude to the Agencia Estatal de Investigación, Spanish Ministry of Economy, Industry, and Competitiveness (Government of Spain) for the financial support received under the scope of the projects RECYBUILDMAT (PID2019-108067RB-I00/AEI/10.13039/501100011033); 3D-Crete (2019PROD00066/IU68-017262-Codi project: J-02696); and CREEF (PID2019-108978RB-C32/AEI/10.13039/501100011033). The first author acknowledges the Banco Santander for the Research Scholarships (Postdoc-UPC 2022 Grant)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Predicting flexural post-cracking strength of fiber-reinforced concrete in the Barcelona test using a neural network-aided approach

  • Ikumi Montserrat, Tai
  • Galeote Moreno, Eduardo
  • Pujadas Álvarez, Pablo
  • Fuente Antequera, Albert de la
  • López Carreño, Rubén-Daniel
Structural fibers represent an effective strategy for enhancing the post-cracking tensile strength (fctR) of concrete. Currently, the characterization of this property relies predominantly on experimental methods, introducing uncertainties during the design phase and impeding advancements in new fiber types or the optimization of existing ones. This paper introduces a multilayer perceptron neural network designed to predict the fctR of fiber-reinforced concrete (FRC) undergoing the Barcelona Test. The optimal architecture of the predictor is determined through the evaluation of 9216 configurations involving input dimensions and the number of hidden layers and neurons. Generalization performance is rigorously assessed using repeated random sub-sampling validation across 50 iterations. The finalized model demonstrates a high accuracy in predicting fctR for various cracking stages in FRC (R2 of 0.87, 0.86, and 0.83). A comprehensive parametric analysis is conducted to establish coherence between the model's predictions and the established understanding of FRC behavior. Furthermore, numerical expressions are presented as an alternative tool to traditional testing, offering predictions for the residual strength of the Barcelona Test. These predictions consider factors such as fiber dosage, concrete strength, specimen type, height, and fiber geometric characteristics, serving as valuable tools for pre-design and quality control purposes. Such approaches are essential for fostering advancements in FRC technology., T. Ikumi is supported by the Torres Quevedo programme PTQ2018-009877 sponsored by the Spanish Ministry of Science and Innovation. The authors also express their gratitude to the same Spanish Ministry for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32) and to the Catalan agency AGAUR trough their research groups support program (2021 SGR 00341). Finally, P. Pujadas wishes to recognise the support from Serra Hunter programme., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Analysis of design constitutive model for plastic fibre reinforced concrete through inverse analysis

  • Galeote Moreno, Eduardo
  • Nogales Arroyo, Alejandro
  • Fuente Antequera, Albert de la
The increasing use of fibre reinforced concrete (FRC) as a structural material requires a constant development of new tools for design purposes. In this line, different codes and guidelines include constitutive models for FRC in their specifications. However, these constitutive models are usually based on the behaviour of steel fibre reinforced concrete (SFRC) and present several limitations on representing the full behaviour of macro-synthetic fibre reinforced concrete (MSFRC). With the aim of analysing the suitability of the constitutive models when applied on macro-synthetic fibres, an experimental program to determine the performance of MSFRC using different fibre contents and concrete mixes was performed. The study of the constitutive models was conducted through an inverse analysis using a two-dimensional analytical model to verify and compare the FRC constitutive equations of the MC2010 with the experimental results. The constitutive model of MC2010 was selected given that it is able to capture both the softening and hardening behaviour of FRC through a three-point constitutive equation. The results show that the original constitutive model of the MC2010 tends to overestimate the performance of PFRC. Moreover, it could be necessary to include an additional point on the post-cracking branch of the constitutive model to represent more accurately the full residual strength of PFRC. The results also show that the ultimate strain of the constitutive model should be extended to fully capture the performance of PFRC, especially for large deformations. This study suggests that it should be necessary to redefine the constitutive models through a new approach distinguishing between FRC blended with steel or macro-synthetic fibres., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Macro-synthetic fibre reinforced concrete partition walls for buildings. Part 2: experimental programme on walls cast on site

  • Nogales Arroyo, Alejandro
  • Fernández Ruíz, Miguel
  • Redaelli, Dario
  • Monserrat López, Andrea
  • Bourqui, Didier
  • Fuente Antequera, Albert de la
In the context of an experimental programme on the use of macrosynthetic fibre reinforced concrete (MSFRC) for casting building partition walls, three walls from a residential building in Switzerland were selected for an onsite application (with lengths varying between 2.8 and 13 m). The walls had an amount of fibres equal to 4 kg/m3 and only conventional reinforcement at the construction joints with adjacent walls. In addition, specimens were cast in order to measure the strength, rheological properties and characterise the post-cracking behaviour of MSFRC. A crack monitoring protocol was conducted on the walls for crack detecting and tracking their evolution over time, with no noticeable cracks in the short walls. The cracks detected for the 13 m-long wall were measured and the results summarized in this document. This research contribution aims at showcasing the use of MSFRC as an alternative to ordinary reinforcement for building partition walls, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Macro-synthetic fibre reinforced concrete partition walls for buildings. Part 1: experimental programme and real-scale prototype

  • Fernández Ruíz, Miguel
  • Redaelli, Dario
  • Nogales Arroyo, Alejandro
  • Monserrat López, Andrea
  • Bourqui, Didier
  • Fuente Antequera, Albert de la
The use of conventional reinforced concrete for building partition walls has proven several benefits in terms of acoustic performance and robustness. Horizontal reinforcement is typically governing in their design, and arranged to control cracking due to shrinkage and imposed deformations. In view of reducing material consumption and CO2eq, an alternative reinforcement concept based on the use of macro-synthetic fibres (MSFRC) is proposed in this paper and applied in practice within an actual building recently completed in Switzerland. This paper collects the research and practical experiences of the authors and aims at addressing questions that may arise during the construction and design stage of such members. To this end, a real-scale cast-in-situ MSFRC prototype wall of h/b/t = 2.8/1.2/0.15 m was cast. The objective is to shed some light on the casting procedure for wall elements and to assess the mechanical and rheological properties of the mix and fibre distribution and orientation., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Effect of sustained load on the flexural bearing capacity of polypropylene fibre and minimum steel-bar reinforced concrete beams

  • Tošić, Nikola
  • Hunger, Martin
  • Vaquero Martinez, José María
  • Fuente Antequera, Albert de la
Macro-synthetic fibres are becoming increasingly attractive as concrete reinforcement in structural applications, polypropylene fibre reinforced concrete, and macro-synthetic fibre reinforced concrete (MSFRC) in general, being an example of this tendency. Nonetheless, further knowledge needs to be gathered in relation with the time-dependant properties (i.e., creep) of the MSFRCs when its use is oriented to design-for-cracking structural elements. For this purpose, an extensive experimental programme was carried out on the flexural load bearing capacity of full-scale MSFRC beams (with mini-mum conventional steel reinforcement). Namely, beams with spans of 3 m and cross-section size of 200×250 mm were produced from a C40/50 concrete with 0 (reference), 3 and 9 kg/m3 of polypropylene fibres. Four beams were cast from each concrete type. After 28 days, two beams from each concrete type were tested until failure in three-point bending configuration. Then, one beam from each concrete was placed under sustained load for one year in a four-point bending configuration, whereas another beam from each concrete was left unloaded for one year under the same environmental conditions. After one year, both remaining beams from each concrete were tested until failure in bending. The results of the tests allowed assessing the effects of the sustained load on the remaining bearing capacity of the beams and confirming that the inclusion of a minimum steel-bar reinforcement was sufficient to prevent the beams from uncontrolled deformations triggered by tertiary tensile creep. The results were accompanied by full physical-mechanical characterization of the concretes. The preliminary results presented herein allow confirming that using MSFRC in cracking-allowed structural applications -with at least minimum mechanical (as per codes) steel-bar reinforcement amount- is reliable from the structural standpoint., The authors want also express their gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (Creep and Fatigue of fibre reinforced concrete elements) (PID2019-108978RB-C32). This study has also received funding from Master Build-ers Solutions. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or rec-ommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Rotation and redistribution capacity of continuous fibre reinforced beams with varying reinforcement ratios

  • Nogales, Alejandro
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
The addition of fibres in concrete has been proven as a competitive solution for structural purposes, either using simply fibre reinforced concrete (FRC) or combining fibres with traditional steel reinforcement to produce hybrid reinforced concrete (HRC). Numerous research has demonstrated the benefits of adding fibres in terms of ductility, post-cracking strength, crack spacing, durability, crack width reduction, enhancement against impact, etc. For structural elements subjected to bending, such as beams, it is known that the use of FRC is beneficial for controlling crack spacing, crack widths, and deflections (i.e., serviceability limit states) but there is still a lot of research to be done in terms of ultimate limit state behaviour. This is particularly true for lightly reinforced specimens in which the addition of fibres may result in a reduction of deformation capacity, a softening response after cracking and a loss of ductility with respect to those without fibres, compromising the rotational capacity and therefore the moment redistribution capacity for statically indeterminate structures. In this regard, this research contribution presents a numerical parametric study of continuous beams cast with different FRC classes (according to fib MC2010) along with different reinforcing ratios of longitudinal reinforcement (varying from 0.13% up to 1.14%). The main goal of this research contribution is to assess the ductility, bearing capacity, ultimate plastic rotation and redistribution capacity of such members. The parametric study has been implemented by means of a finite element model (FEM) previously validated using actual tests published that can be found in the literature. The results showed that there is a significant reduction of rotation capacity and moment redistribution for lightly reinforced beams. The results of this study can provide a contribution towards safer structural design of HRC members., The authors express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32). Likewise, the first author acknowledges the Spanish Ministry of Science, Innovation and University for providing support through the PhD Industrial Fellowship (DI-17-09390) in collaboration with Smart Engineering Ltd. (UPC’s Spin-Off)., Postprint (published version)