Skip to main content

PLANTAS FOTOVOLTAICAS CON MODULOS BIFACIALES: ANALISIS, CARACTERIZACION Y OPTIMIZADO

PID2019-110816RB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Outdoor performance of a CdTe based PV generator during 5 years of operation

  • Guerra Menjívar, Moisés Roberto
  • Parra Laita, Íñigo de la
  • Marcos Álvarez, Javier
  • García Solano, Miguel
  • Marroyo Palomo, Luis
Together with the huge growth of the traditional crystalline silicon (Si-x) PV manufacturers, other thin-film solar cells have also emerged such as cadmium telluride (CdTe) manufacturers. They are characterized by the fact that they were created to reduce costs and by the scarcity of silicon, from which the rest of the modules are made. Despite they need more space to generate the same amount of energy as crystalline modules, their price is supposed to be much lower, and argue that they have a better performance at high temperatures. However, real comparisons between the outdoor performance of CdTe and Si-x modules have been scarcely addressed in the literature. This paper provides a comparison under real operating conditions of a CdTe photovoltaic generator versus a conventional silicon generator during 5 years of operation in a mid-latitude area, identifying the causes of the differences observed., This work was supported in part by the Spanish State Research Agency (AEI) under grants PID2019-111262RBI00/AEI/10.13039/501100011033 and PID2019-110816RB-C21-I00/AEI/10.13039/501100011033
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Analysis of a CIS based PV generator versus a multicrystalline generator under outdoor long-term exposure

  • Parra Laita, Íñigo de la
  • Guerra Menjívar, Moisés Roberto
  • Marcos Álvarez, Javier
  • García Solano, Miguel
  • Marroyo Palomo, Luis
The worldwide growth of the PV market has been almost exponential during the last years. Together with conventional crystalline (c-Si) PV modules, “new” commercially available PV technologies such as copper indium selenide (CIS) based solar cells have appeared achieving a similar efficiency comparable to c-Si at similar production cost. In addition to the use of cheaper materials, CIS solar cells manufacturers claim some enhancements such as lower temperature coefficient or higher absorption of diffuse light that achieve to reduce the cost of electrical energy. Although several papers deal with this topic, little is known about real comparisons between CIS technology and conventional crystalline at a PV generator level with real test conditions. This paper analyses the in-field performance and degradation of a commercially available CIS solar based PV generator compared to a conventional c-Si one during four years of operation attributing the differences observed to the possible factors that can influence in both technologies., This work was supported in part by the Spanish State Research Agency (AEI) under grants PID2019-111262RB-I00/AEI/10.13039/501100011033 and PID2019-110816RB-C21-I00/AEI/10.13039/501100011033
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Gain of bifacial PV modules on horizontal single-axis trackers in desert climates

  • Parra Laita, Íñigo de la
  • García Solano, Miguel
  • Marcos Álvarez, Javier
  • Marroyo Palomo, Luis
Over the last few years, the demand for bifacial PV modules has continuously increased. However, there are still some aspects regarding their outdoor performance under real conditions that need further investigation. This paper analyzes the bifacial PV modules gain obtained over one year in a horizontally tracked PV power plant located in the Atacama Desert, Chile. The study was carried out over the course of a year for two different types of trackers: a standard tracker as used in the rest of the plant and a tracker that, according to the manufacturer, is specially designed to maximize the production of the bifacial modules. The results show that bifacial PV modules with a conventional tracker are able to gain approximately a 5% in terms of both radiation and production whereas the bifacial PV modules mounted on the special bifacial tracker can gain up to 5.8% and 6.1 % respectively., This work has been supported by the Spanish State Research Agency (AEI) and ERDF-EU under grants PID2019-110816RB-C21 and PID2022-142179OB-I00. It has also been supported by the UPNA grant PJUPNA2023-11389.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Inverter-based PV ramp-rate limitation strategies: minimizing energy losses

  • González Moreno, Alejandro
  • Marcos Álvarez, Javier
  • Parra Laita, Íñigo de la
  • Marroyo Palomo, Luis
This work analyzes the reduction of power generation in strategies that regulate the PV ramp-rate by using inverter limitation. Although the operating principle implies some energy production losses, not all these losses are necessary. Three different strategies were simulated using experimental 5-second data collected throughout a year at a 38.6 MW PV plant, and their energy losses were obtained for different ramprate levels. An improvement in one of these strategies is proposed and evaluated. The main findings suggest that the proposed modification has the potential to drastically reduce annual production losses to insignificant levels. Regardless of the ramp-rate constrain, simulation results evidenced energy losses bellow 1%., This work was supported in part by the Spanish State Research Agency (AEI) under grants PID2019-111262RBI00/AEI/10.13039/501100011033 and PID2019-110816RBC21-I00/AEI/10.13039/501100011033 as well as the Doctoral Scholarships funded by Public University of Navarre (UPNA).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Design and implementation of a PV installation to measure the optimal orientation of an horizontal single axis tracker under any radiation conditions

  • Arrubla Irigoyen, Mikel
  • García Solano, Miguel
  • Marroyo Palomo, Luis
  • García Gimeno, Íñigo
Traditional PV tracking systems aim to orient the surface of the modules as perpendicular as possible to the sun. However, in cloudy sky conditions, this tracking strategy does not maximize radiation capture. Some authors have attempted to quantify by simulation the radiation gain that would be obtained at various locations if the position of the modules were always optimal. However, there is no study in the state of the art that has experimentally measured this optimal position or the associated energy gain. This paper presents both a facility and a test specially designed to experimentally measure the optimal tilt angle of a Horizontal Single Axis Tracker (HSAT) oriented in the north-south direction, for any sky condition, and for both monofacial and bifacial PV modules. This facility will allow the experimental validation of theoretical optimal angle tracking models and calculations derived from them., This work has been partially supported by the Spanish State Research Agency (AEI) and ERDF-EU under grant PID2019-110816RB-C21